ДДС се публикуват неправилно при прилагане на фактурата за сервиз в италианската версия на Microsoft Dynamics NAV 2009

Информация за актуалната корекция

Вече се предлага от Microsoft предоставя поддържана актуална корекция. Обаче е предназначена само за коригиране на описания в тази статия. Прилагайте корекцията само към системи, изпитващи този конкретен проблем. Възможно е провеждането на допълнителни тестове на тази актуална корекция. Следователно ако не сте силно засегнати от този проблем, препоръчваме да изчакате следващия сервизен пакет за Microsoft Dynamics NAV 2009 или следващата версия на Microsoft Dynamics NAV, който ще съдържа тази корекция.

Забележка: При специални случаи таксите, които са за свързани с поддръжката обаждания могат да бъдат отменени, ако специалист по техническа поддръжка за Microsoft Dynamics и свързани с тях продукти определя, че конкретна актуализация може да разреши проблема. Обичайните такси за поддръжката ще важат за допълнителни въпроси и проблеми, които не спадат към съответната актуализация.

Информация за инсталирането

Microsoft предоставя примери само за илюстративни цели без гаранция за определени цели. Това включва, но не е ограничено до, подразбиращи се гаранции за продаваемост или годност за определена цел. Тази статия се предполага, че сте запознати с демонстрирания език за програмиране и инструментите, които се използват за създаване и процедури за отстраняване на грешки. Инженерите на поддръжката на Microsoft могат да помогнат обяснение на функциите на конкретна процедура. Въпреки това те няма да модифицират тези примери с цел осигуряване на допълнителна функционалност или създаване на процедури за удовлетворение на конкретните ви изисквания.

Забележка: Преди да инсталирате тази актуална корекция, уверете се, че всички потребители на клиента на Microsoft Dynamics NAV са излезли от системата. Това включва и услуги на Microsoft Dynamics NAV приложение сървър (NAS). Трябва да бъде само клиент потребител, който е влязъл при прилагане на тази актуална корекция.

За прилагане на тази актуална корекция, трябва да имате лиценз разработчик.

Препоръчително е потребителският акаунт в прозореца влизания в Windows или в прозореца на БД присвояването на "Супер" ИД на роля. Ако потребителският акаунт не може да бъде възложена ИД на роля на "Супер", трябва да проверите, че потребителският акаунт има следните права:

• Разрешение за промяна на обекта, ще се променя.

• Разрешението за изпълнение за системата обект номер 5210 обект и системата обект ID 9015
  
  обект.

Забележка: Не трябва да имате права на съхранените данни, освен ако трябва да извършите възстановяване на данни.

Промени код

Забележка: Винаги тест код решава в управлявана среда преди да приложите корекциите производство компютри.

За да разрешите този проблем, изпълнете следните стъпки:

1. Да променяте ключовете в таблицата Запис за ДДС (254) както следва:
   Съществуващ код

   ...KeyGroups=SalesTax }
         {    ;Type,Country/Region Code,VAT Registration No.,VAT Bus. Posting Group,VAT Prod. Posting Group,Posting Date;
                                                        SumIndexFields=Base,Additional-Currency Base;
                                                        KeyGroups=VIES_EC }
   
   // Delete the following line.
        {    ;Document No.,Posting Date                }
   // End of the deleted line.
   
         {    ;Transaction No.                          }
         {    ;Tax Jurisdiction Code,Tax Group Used,Tax Type,Use Tax,Posting Date;
                                                        KeyGroups=SalesTax }
         {    ;Type,Closed,VAT Bus. Posting Group,VAT Prod. Posting Group,Tax Jurisdiction Code,Use Tax,Tax Liable,VAT Period,Operation Occurred Date,Activity Code;
   ...
   

   Замени код

   ...KeyGroups=SalesTax }
         {    ;Type,Country/Region Code,VAT Registration No.,VAT Bus. Posting Group,VAT Prod. Posting Group,Posting Date;
                                                        SumIndexFields=Base,Additional-Currency Base;
                                                        KeyGroups=VIES_EC }
   
   // Add the following line.
        {    ;Document No.,Posting Date               ;SumIndexFields=Remaining Unrealized Base,Remaining Unrealized Amount }
   // End of the added line.
   
         {    ;Transaction No.                          }
         {    ;Tax Jurisdiction Code,Tax Group Used,Tax Type,Use Tax,Posting Date;
                                                        KeyGroups=SalesTax }
         {    ;Type,Closed,VAT Bus. Posting Group,VAT Prod. Posting Group,Tax Jurisdiction Code,Use Tax,Tax Liable,VAT Period,Operation Occurred Date,Activity Code;
   ...
   

2. Промяна на кода на GetUnRealizedVATPart функцията в таблицата Запис за ДДС (254) както следва:
   Съществуващ код 1

   ...END;
           EXIT(GLSetup."Additional Reporting Currency");
         END;
   
   // Delete the following line.
        PROCEDURE GetUnRealizedVATPart@2(SettledAmount@1003 : Decimal;Paid@1005 : Decimal;Full@1001 : Decimal;TotalUnrealVATAmountFirst@1006 : Decimal;TotalUnrealVATAmountLast@1007 : Decimal;Type2@1130000 : 'Sale,Purchase';DocType@1130001 : ' ,Payment,Invoice,Credit Memo,Finance Charge Memo,Reminder,Refund,,,,Dishonored';LedgEntryOpen@1130002 : Boolean;LedgEntryAmount@1130003 : Decimal;LedgEntryRemAmt@1130004 : Decimal;TotalPayments@1130005 : Decimal) : Decimal;
   // End of the deleted line.
   
         VAR
           UnrealizedVatType@1000 : ' ,Percentage,First,Last,First (Fully Paid),Last (Fully Paid)';
         BEGIN
           IF (Type <> 0) AND
   ...
   

   Замени код 1

   ...END;
           EXIT(GLSetup."Additional Reporting Currency");
         END;
   
   // Add the following line.
        PROCEDURE GetUnRealizedVATPart@2(SettledAmount@1003 : Decimal;Paid@1005 : Decimal;Full@1001 : Decimal;TotalUnrealVATAmountFirst@1006 : Decimal;TotalUnrealVATAmountLast@1007 : Decimal;Type2@1130000 : 'Sale,Purchase';DocType@1130001 : ' ,Payment,Invoice,Credit Memo,Finance Charge Memo,Reminder,Refund,,,,Dishonored';LedgEntryOpen@1130002 : Boolean;LedgEntryAmount@1130003 : Decimal;LedgEntryRemAmt@1130004 : Decimal;TotalPayments@1130005 : Decimal;VATPart@1130006 : Decimal;VAR TransactionInclPrepmt@1130007 : Boolean) : Decimal;
   // End of the added line.
   
         VAR
           UnrealizedVatType@1000 : ' ,Percentage,First,Last,First (Fully Paid),Last (Fully Paid)';
         BEGIN
           IF (Type <> 0) AND
   ...
   

   Съществуващ код 2

   ...(("Remaining Unrealized Amount" = 0) AND
                 ("Remaining Unrealized Base" = 0))
             THEN
               EXIT(0);
   
   // Delete the following lines.
           //IF ABS(Paid) = ABS(Full) THEN
           //   EXIT(1);
   
            CASE UnrealizedVatType OF
              UnrealizedVatType::Percentage:
                BEGIN
                  IF Type2 = Type2::Purchase THEN BEGIN
                    IF (DocType = DocType::"Credit Memo") THEN BEGIN
                      IF (TotalPayments - ("Remaining Unrealized Amount" + "Remaining Unrealized Base")) <= 0 THEN
                        EXIT(1)
                    END ELSE BEGIN
                      IF (TotalPayments - ("Remaining Unrealized Amount" + "Remaining Unrealized Base")) < 0 THEN
                        EXIT(CalcVatPart(GetCurrencyCode(), 1.0, TotalPayments,
                          ("Remaining Unrealized Amount" + "Remaining Unrealized Base")))
                      ELSE
                        EXIT(1)
                    END;
                  END
                  ELSE BEGIN
                    IF (DocType = DocType::"Credit Memo") THEN BEGIN
                      IF (-TotalPayments + ("Remaining Unrealized Amount" + "Remaining Unrealized Base")) <= 0 THEN
                        EXIT(1)
                    END ELSE BEGIN
                      IF (-TotalPayments + ("Remaining Unrealized Amount" + "Remaining Unrealized Base")) < 0 THEN
                        EXIT(CalcVatPart(GetCurrencyCode(), 1.0, TotalPayments,
                          ("Remaining Unrealized Amount" + "Remaining Unrealized Base")))
                      ELSE
                        EXIT(1)
                    END;
                  END;
   // End of the deleted lines.
   
                 END;
               UnrealizedVatType::First,UnrealizedVatType::"First (Fully Paid)":
                   BEGIN
                     IF NOT LedgEntryOpen OR ("VAT Calculation Type" = "VAT Calculation Type"::"Reverse Charge VAT") THEN
   ...
   

   Замени код 2

   ...(("Remaining Unrealized Amount" = 0) AND
                 ("Remaining Unrealized Base" = 0))
             THEN
               EXIT(0);
   
   // Add the following lines.
            IF (ABS(GetRemainingUnrealizedAmount("Document No.","Posting Date")) = ABS(Paid)) AND
               NOT IsPrepaymentIncluded(Type2,DocType,"Document No.")
            THEN BEGIN
              VATPart := 1;
              EXIT(VATPart);
            END;
   
            CASE UnrealizedVatType OF
              UnrealizedVatType::Percentage:
                IF Type2 = Type2::Purchase THEN BEGIN
                  TransactionInclPrepmt := FALSE;
                  IF DocType = DocType::"Credit Memo" THEN BEGIN
                    IF PurchCrMemoInclPrepmt("Document No.") THEN BEGIN
                      TransactionInclPrepmt := TRUE;
                      IF VATPart = 0 THEN BEGIN
                        IF (ABS(TotalPayments) >= ABS(GetTransactionRemainingAmount("Transaction No."))) OR
                           (ABS(Paid) = ABS(Full))
                        THEN
                          VATPart := 1
                        ELSE
                          VATPart :=
                            CalcVatPart(
                              GetCurrencyCode,1.0,TotalPayments,
                              GetTransactionRemainingAmount("Transaction No."));
                      END;
                      EXIT(VATPart);
                    END ELSE
                      IF (TotalPayments - ("Remaining Unrealized Amount" + "Remaining Unrealized Base")) <= 0 THEN
                        EXIT(1)
                  END ELSE BEGIN
                    IF PurchInvInclPrepmt("Document No.") THEN BEGIN
                      TransactionInclPrepmt := TRUE;
                      IF VATPart = 0 THEN BEGIN
                        IF (ABS(TotalPayments) >= ABS(GetTransactionRemainingAmount("Transaction No."))) OR
                          (ABS(Paid) = ABS(Full))
                        THEN
                          VATPart := 1
                        ELSE
                          VATPart :=
                            CalcVatPart(
                              GetCurrencyCode,1.0,TotalPayments,
                              GetTransactionRemainingAmount("Transaction No."));
                      END;
                      EXIT(VATPart);
                    END ELSE
                      IF (TotalPayments - ("Remaining Unrealized Amount" + "Remaining Unrealized Base")) < 0 THEN
                        EXIT(
                          CalcVatPart(
                            GetCurrencyCode,1.0,TotalPayments,
                           ("Remaining Unrealized Amount" + "Remaining Unrealized Base")));
                    EXIT(1);
                  END;
                END ELSE BEGIN
                  TransactionInclPrepmt := FALSE;
                  IF DocType = DocType::"Credit Memo" THEN BEGIN
                    IF SalesInvInclPrepmt("Document No.") THEN BEGIN
                      TransactionInclPrepmt := TRUE;
                      IF VATPart = 0 THEN BEGIN
                        IF (ABS(TotalPayments) >= ABS(GetTransactionRemainingAmount("Transaction No."))) OR
                           (ABS(Paid) = ABS(Full))
                        THEN
                          VATPart := 1
                        ELSE
                          VATPart :=
                            CalcVatPart(
                              GetCurrencyCode,1.0,TotalPayments,
                              GetTransactionRemainingAmount("Transaction No."));
                      END;
                      EXIT(VATPart);
                    END;
                    IF (-TotalPayments + ("Remaining Unrealized Amount" + "Remaining Unrealized Base")) <= 0 THEN
                      EXIT(1);
                    EXIT(TotalPayments / ("Remaining Unrealized Amount" + "Remaining Unrealized Base"));
                  END;
                  IF SalesInvInclPrepmt("Document No.") THEN BEGIN
                    TransactionInclPrepmt := TRUE;
                    IF VATPart = 0 THEN BEGIN
                     IF (ABS(TotalPayments) >= ABS(GetTransactionRemainingAmount("Transaction No."))) OR
                         (ABS(Paid) = ABS(Full))
                      THEN
                        VATPart := 1
                      ELSE
                        VATPart :=
                          CalcVatPart(
                            GetCurrencyCode,1.0,TotalPayments,
                            GetTransactionRemainingAmount("Transaction No."));
                    END;
                    EXIT(VATPart);
                  END ELSE
                    IF (-TotalPayments + ("Remaining Unrealized Amount" + "Remaining Unrealized Base")) < 0 THEN
                      EXIT(
                        CalcVatPart(
                          GetCurrencyCode,1.0,TotalPayments,
                          ("Remaining Unrealized Amount" + "Remaining Unrealized Base")));
                  EXIT(1);
   // End of the added lines.
   
                 END;
               UnrealizedVatType::First,UnrealizedVatType::"First (Fully Paid)":
                   BEGIN
                     IF NOT LedgEntryOpen OR ("VAT Calculation Type" = "VAT Calculation Type"::"Reverse Charge VAT") THEN
   ...
   

3. Промяна на кода на SalesInvInclPrepmt функцията в таблицата Запис за ДДС (254) както следва:
   Съществуващ код

   ...EXIT(RemainingAmount - SettledAmount);
           EXIT(RemainingAmount - (SettledAmount / CurrencyFactor));
         END;
   
         BEGIN
         END.
       }
     }
   ...
   

   Замени код

   ...EXIT(RemainingAmount - SettledAmount);
           EXIT(RemainingAmount - (SettledAmount / CurrencyFactor));
         END;
   
   // Add the following lines.
     LOCAL PROCEDURE SalesInvInclPrepmt@1130019(DocNo@1130000 : Code[20]) : Boolean;
     VAR
       SalesInvLine@1130001 : Record 113;
     BEGIN
       SalesInvLine.SETRANGE("Document No.",DocNo);
       SalesInvLine.SETRANGE("Prepayment Line",TRUE);
       EXIT(NOT SalesInvLine.ISEMPTY);
     END;
   
     LOCAL PROCEDURE SalesCrMemoInclPrepmt@1130101(DocNo@1130000 : Code[20]) : Boolean;
     VAR
       SalesCrMemoLine@1130001 : Record 115;
     BEGIN
       SalesCrMemoLine.SETRANGE("Document No.",DocNo);
       SalesCrMemoLine.SETRANGE("Prepayment Line",TRUE);
       EXIT(NOT SalesCrMemoLine.ISEMPTY);
     END;
   
     LOCAL PROCEDURE PurchInvInclPrepmt@1130021(DocNo@1130000 : Code[20]) : Boolean;
     VAR
       PurchInvLine@1130001 : Record 123;
     BEGIN
       PurchInvLine.SETRANGE("Document No.",DocNo);
       PurchInvLine.SETRANGE("Prepayment Line",TRUE);
       EXIT(NOT PurchInvLine.ISEMPTY);
     END;
   
     LOCAL PROCEDURE PurchCrMemoInclPrepmt@1130020(DocNo@1130000 : Code[20]) : Boolean;
     VAR
       PurchCrMemoLine@1130001 : Record 125;
     BEGIN
       PurchCrMemoLine.SETRANGE("Document No.",DocNo);
       PurchCrMemoLine.SETRANGE("Prepayment Line",TRUE);
       EXIT(NOT PurchCrMemoLine.ISEMPTY);
     END;
   
     LOCAL PROCEDURE GetTransactionRemainingAmount@1130016(TransactionNo@1130000 : Integer) TransactionAmount : Decimal;
     VAR
       VATEntry@1130001 : Record 254;
     BEGIN
       WITH VATEntry DO BEGIN
         SETRANGE("Transaction No.",TransactionNo);
         IF FINDSET THEN
           REPEAT
             TransactionAmount += "Remaining Unrealized Base" + "Remaining Unrealized Amount";
           UNTIL NEXT = 0;
       END;
     END;
   
     LOCAL PROCEDURE GetRemainingUnrealizedAmount@1130017(DocumentNo@1130000 : Code[20];PostingDate@1130001 : Date) : Decimal;
     VAR
       VATEntry@1130002 : Record 254;
     BEGIN
       VATEntry.SETCURRENTKEY("Document No.","Posting Date");
       VATEntry.SETRANGE("Document No.",DocumentNo);
       VATEntry.SETRANGE("Posting Date",PostingDate);
       VATEntry.CALCSUMS("Remaining Unrealized Base","Remaining Unrealized Amount");
       EXIT(VATEntry."Remaining Unrealized Base" + VATEntry."Remaining Unrealized Amount");
     END;
   
     LOCAL PROCEDURE IsPrepaymentIncluded@1130023(VATType@1130002 : 'Sale,Purchase';DocumentType@1130000 : ' ,Payment,Invoice,Credit Memo,Finance Charge Memo,Reminder,Refund,,,,Dishonored';DocumentNo@1130001 : Code[20]) : Boolean;
     BEGIN
       CASE VATType OF
         VATType::Purchase:
           IF DocumentType = DocumentType::"Credit Memo" THEN
             EXIT(PurchCrMemoInclPrepmt(DocumentNo))
           ELSE
             EXIT(PurchInvInclPrepmt(DocumentNo));
         VATType::Sale:
           IF DocumentType = DocumentType::"Credit Memo" THEN
             EXIT(SalesInvInclPrepmt(DocumentNo))
           ELSE
             EXIT(SalesCrMemoInclPrepmt(DocumentNo));
       END;
     END;
   // End of the added lines.
   
         BEGIN
         END.
       }
     }
   ...
   

4. В CustUnrealizedVAT функция в общ журнал. промени-Post линия кодова единица (12) както следва:
   Съществуващ код 1

   ...SalesVATUnrealAccount@1010 : Code[20];
           LastConnectionNo@1011 : Integer;
           TotalPayments@1130000 : Decimal;
           Type2@1130001 : 'Sale,Purchase';
         BEGIN
           PaidAmount := CustLedgEntry2."Amount (LCY)" - CustLedgEntry2."Remaining Amt. (LCY)";
           VATEntry2.RESET;
           VATEntry2.SETCURRENTKEY("Transaction No.");
   ...
   

   Замени код 1

   ...SalesVATUnrealAccount@1010 : Code[20];
           LastConnectionNo@1011 : Integer;
           TotalPayments@1130000 : Decimal;
           Type2@1130001 : 'Sale,Purchase';
   
   // Add the following line.
          TransactionInclPrepmt@1130002 : Boolean;
   // End of the added line.
   
         BEGIN
           PaidAmount := CustLedgEntry2."Amount (LCY)" - CustLedgEntry2."Remaining Amt. (LCY)";
           VATEntry2.RESET;
           VATEntry2.SETCURRENTKEY("Transaction No.");
   ...
   

   Съществуващ код 2

   ...InsertSummarizedVAT;
                 LastConnectionNo := VATEntry2."Sales Tax Connection No.";
               END;
   
   // Delete the following lines.
              VATPart := VATEntry2.GetUnRealizedVATPart(
                ROUND(SettledAmount / CustLedgEntry2.GetOriginalCurrencyFactor),
                PaidAmount,
                CustLedgEntry2."Original Amt. (LCY)",
                TotalUnrealVATAmountFirst,
                TotalUnrealVATAmountLast,
                Type2::Sale,
                CustLedgEntry2."Document Type",
                CustLedgEntry2.Open,
                CustLedgEntry2.Amount,
                CustLedgEntry2."Remaining Amount",
                TotalPayments);
   // End of the deleted lines.
   
               IF VATPart > 0 THEN BEGIN
                 CASE VATEntry2."VAT Calculation Type" OF
                   VATEntry2."VAT Calculation Type"::"Normal VAT",
   ...
   

   Замени код 2

   ...InsertSummarizedVAT;
                 LastConnectionNo := VATEntry2."Sales Tax Connection No.";
               END;
   
   // Add the following lines.
              VATPart :=
                VATEntry2.GetUnRealizedVATPart(
                  ROUND(SettledAmount / CustLedgEntry2.GetOriginalCurrencyFactor),
                  PaidAmount,
                  CustLedgEntry2."Original Amt. (LCY)",
                  TotalUnrealVATAmountFirst,
                  TotalUnrealVATAmountLast,
                  Type2::Sale,
                  CustLedgEntry2."Document Type",
                  CustLedgEntry2.Open,
                  CustLedgEntry2.Amount,
                  CustLedgEntry2."Remaining Amount",
                  TotalPayments,
                  VATPart,
                  TransactionInclPrepmt);
   // End of the added lines.
   
               IF VATPart > 0 THEN BEGIN
                 CASE VATEntry2."VAT Calculation Type" OF
                   VATEntry2."VAT Calculation Type"::"Normal VAT",
   ...
   

   Съществуващ код 3

   ...VATEntry2."Add.-Curr. Rem. Unreal. Base" * VATPart,
                       AddCurrency."Amount Rounding Precision");
                 END;
   
   // Delete the following line.
                TotalPayments := TotalPayments - (VATEntry2."Remaining Unrealized Amount" + VATEntry2."Remaining Unrealized Base");
   // End of the deleted line.
   
                 IF VATAmount <> 0 THEN BEGIN
                   InitGLEntry(SalesVATUnrealAccount,-VATAmount,0,FALSE,TRUE);
                   GLEntry."Additional-Currency Amount" := -VATAmountAddCurr;
   ...
   

   Замени код 3

   ...VATEntry2."Add.-Curr. Rem. Unreal. Base" * VATPart,
                       AddCurrency."Amount Rounding Precision");
                 END;
   
   // Add the following lines.
                IF TransactionInclPrepmt THEN
                  TotalPayments := TotalPayments - ROUND(TotalPayments * VATPart)
                ELSE
                  TotalPayments :=
                    TotalPayments - (VATEntry2."Remaining Unrealized Amount" + VATEntry2."Remaining Unrealized Base");
   // End of the added lines.
   
                 IF VATAmount <> 0 THEN BEGIN
                   InitGLEntry(SalesVATUnrealAccount,-VATAmount,0,FALSE,TRUE);
                   GLEntry."Additional-Currency Amount" := -VATAmountAddCurr;
   ...
   

5. В VendUnrealizedVAT функция в общ журнал. промени-Post линия кодова единица (12) както следва:
   Съществуващ код 1

   ...PurchReverseUnrealAccount@1012 : Code[20];
           LastConnectionNo@1013 : Integer;
           Type2@1130000 : 'Sale,Purchase';
           TotalPayments@1130001 : Decimal;
         BEGIN
           VATEntry2.RESET;
           VATEntry2.SETCURRENTKEY("Transaction No.");
           VATEntry2.SETRANGE("Transaction No.",VendLedgEntry2."Transaction No.");
   ...
   

   Замени код 1

   ...PurchReverseUnrealAccount@1012 : Code[20];
           LastConnectionNo@1013 : Integer;
           Type2@1130000 : 'Sale,Purchase';
           TotalPayments@1130001 : Decimal;
   
   // Add the following line.
          TransactionInclPrepmt@1130002 : Boolean;
   // End of the added line.
   
         BEGIN
           VATEntry2.RESET;
           VATEntry2.SETCURRENTKEY("Transaction No.");
           VATEntry2.SETRANGE("Transaction No.",VendLedgEntry2."Transaction No.");
   ...
   

   Съществуващ код 2

   ...IF LastConnectionNo <> VATEntry2."Sales Tax Connection No." THEN BEGIN
                 InsertSummarizedVAT;
                 LastConnectionNo := VATEntry2."Sales Tax Connection No.";
               END;
   
   // Delete the following lines.
              IF (TotalPayments <= 0) AND (VendLedgEntry2."Document Type" = VendLedgEntry2."Document Type"::Invoice) THEN
                EXIT;
              VATPart := VATEntry2.GetUnRealizedVATPart(
                ROUND(SettledAmount / VendLedgEntry2.GetOriginalCurrencyFactor),
                PaidAmount,
                VendLedgEntry2."Original Amt. (LCY)",
                TotalUnrealVATAmountFirst,
                TotalUnrealVATAmountLast,
                Type2::Purchase,
                VendLedgEntry2."Document Type",
                VendLedgEntry2.Open,
                VendLedgEntry2.Amount,
                VendLedgEntry2."Remaining Amount",
                TotalPayments);
   // End of the deleted lines.
   
               IF VATPart >= 0 THEN BEGIN
                 IF VATPart <> 0 THEN BEGIN
                   CASE VATEntry2."VAT Calculation Type" OF
   ...
   

   Замени код 2

   ...IF LastConnectionNo <> VATEntry2."Sales Tax Connection No." THEN BEGIN
                 InsertSummarizedVAT;
                 LastConnectionNo := VATEntry2."Sales Tax Connection No.";
               END;
   
   // Add the following lines.
              IF ((TotalPayments <= 0) AND (NOT TransactionInclPrepmt)) AND
                 (VendLedgEntry2."Document Type" = VendLedgEntry2."Document Type"::Invoice)
              THEN
                EXIT;
   
              VATPart :=
                VATEntry2.GetUnRealizedVATPart(
                  ROUND(SettledAmount / VendLedgEntry2.GetOriginalCurrencyFactor),
                  PaidAmount,
                  VendLedgEntry2."Original Amt. (LCY)",
                  TotalUnrealVATAmountFirst,
                  TotalUnrealVATAmountLast,
                  Type2::Purchase,
                  VendLedgEntry2."Document Type",
                  VendLedgEntry2.Open,
                  VendLedgEntry2.Amount,
                  VendLedgEntry2."Remaining Amount",
                  TotalPayments,
                  VATPart,
                  TransactionInclPrepmt);
   // End of the added lines.
   
               IF VATPart >= 0 THEN BEGIN
                 IF VATPart <> 0 THEN BEGIN
                   CASE VATEntry2."VAT Calculation Type" OF
   ...
   

   Съществуващ код 3

   ...PurchVATUnrealAccount := TaxJurisdiction."Unreal. Tax Acc. (Purchases)";
                       END;
                   END;
   
   // Delete the following lines.
                  VATAmount := ROUND((VATEntry2."Remaining Unrealized Amount" * VATPart),GLSetup."Amount Rounding Precision");
                  VATBase := ROUND((VATEntry2."Remaining Unrealized Base"* VATPart),GLSetup."Amount Rounding Precision");
                  TotalPayments := TotalPayments - (VATEntry2."Remaining Unrealized Amount" + VATEntry2."Remaining Unrealized Base");
   // End of the deleted lines.
   
                   IF VATAmount <> 0 THEN BEGIN
                     InitGLEntry(PurchVATUnrealAccount,-VATAmount,0,FALSE,TRUE);
                     GLEntry."Additional-Currency Amount" := -VATAmountAddCurr;
   ...
   

   Замени код 3

   ...PurchVATUnrealAccount := TaxJurisdiction."Unreal. Tax Acc. (Purchases)";
                       END;
                   END;
   
   // Add the following lines.
                  VATAmount := ROUND(VATEntry2."Remaining Unrealized Amount" * VATPart,GLSetup."Amount Rounding Precision");
                  VATBase := ROUND(VATEntry2."Remaining Unrealized Base" * VATPart,GLSetup."Amount Rounding Precision");
                IF TransactionInclPrepmt THEN
                  TotalPayments := TotalPayments - ROUND(TotalPayments * VATPart)
                ELSE
                  TotalPayments :=
                    TotalPayments - (VATEntry2."Remaining Unrealized Amount" + VATEntry2."Remaining Unrealized Base");
   // End of the added lines.
   
                   IF VATAmount <> 0 THEN BEGIN
                     InitGLEntry(PurchVATUnrealAccount,-VATAmount,0,FALSE,TRUE);
                     GLEntry."Additional-Currency Amount" := -VATAmountAddCurr;
   ...
   

Необходими условия:

Трябва да имате един от следните продукти, за да приложите тази спешна корекция:

• Италиански местонахождението на Microsoft Dynamics NAV 2009 R2

• Италиански местонахождението на Microsoft Dynamics NAV 2009 SP1

Информация за премахване

Не можете да премахнете тази актуална корекция.