September release main support package deployment tables
Microsoft Windows deployment tables
Windows Server 2008 (all editions)
Reference table
The following table contains the security update information for this software.
Security update file names |
For all supported 32-bit editions of Windows Server 2008: |
|
For all supported x64-based editions of Windows Server 2008: |
|
For all supported Itanium-based editions of Windows Server 2008: |
Installation switches |
|
Restart requirement |
You must restart the system after you apply this security update. |
Removal information |
WUSA.exe does not support uninstalling updates. To uninstall an update that was installed by WUSA, click Control Panel, and then click Security. Under "Windows Update," click View installed updates, and then select from the list of updates. |
File information |
|
Registry key verification |
Note This update does not add a registry key to validate its installation. |
Internet Explorer deployment tables
Internet Explorer 9, Internet Explorer 10, and Internet Explorer 11 installed on Windows (all editions)
Reference table
The following table contains the security update information for this software.
Security update file names |
For Internet Explorer 9 in all supported 32-bit editions of Windows Server 2008: |
|
For Internet Explorer 10 in all supported editions of Windows Server 2012: |
|
For Internet Explorer 11 in Windows 7 for 32-bit Systems Service Pack 1: |
|
For Internet Explorer 11 in all supported 32-bit editions of Windows 8.1: |
|
For Internet Explorer 11 in all supported editions of Windows Server 2012 R2: |
|
For Internet Explorer 11 in Windows 7 for x64-based Systems Service Pack 1: |
|
For Internet Explorer 11 in Windows Server 2008 R2 for x64-based Systems Service Pack 1: |
|
For Internet Explorer 11 in all supported x64-based editions of Windows 8.1: |
Installation switches |
|
Restart requirement |
You must restart the system after you apply this security update. |
Removal information |
WUSA.exe does not support uninstalling updates. To uninstall an update that was installed by WUSA, click Control Panel, and then click Security. Under "Windows Update," click View installed updates, and then select from the list of updates. |
File information |
|
Registry key verification |
Note This update does not add a registry key to validate its installation. |
Microsoft Office deployment tables
Microsoft Office 2007 (all editions) and other software
Reference table
The following table contains the security update information for this software.
Security update file name |
Microsoft Office 2007 Service Pack 3: |
|
Microsoft Excel 2007 Service Pack 3: |
|
Microsoft Outlook 2007 Service Pack 3: |
|
Microsoft PowerPoint 2007 Service Pack 3 |
|
Microsoft Publisher 2007 Service Pack 3 |
|
Microsoft Office Compatibility Pack Service Pack 3 |
|
Microsoft Excel Viewer: |
|
Microsoft Word Viewer: |
Installation switches |
|
Restart requirement |
In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart. |
Removal information |
Use the Add or Remove Programs item in Control Panel. |
File information |
See Microsoft Knowledge Base article 3213646 |
Registry key verification |
Not applicable |
Microsoft Office 2010 (all editions)
Reference table
The following table contains the security update information for this software.
Security update file name |
Microsoft Office 2010 Service Pack 2 (32-bit editions): |
|
Microsoft Office 2010 Service Pack 2 (64-bit editions): |
|
Microsoft Excel 2010 Service Pack 2 (32-bit editions): |
|
Microsoft Excel 2010 Service Pack 2 (64-bit editions): |
|
Microsoft Outlook 2010 Service Pack 2 (32-bit editions): |
|
Microsoft Outlook 2010 Service Pack 2 (64-bit editions): |
|
Microsoft PowerPoint 2010 Service Pack 2 (32-bit editions) |
|
Microsoft PowerPoint 2010 Service Pack 2 (64-bit editions): |
|
Microsoft PowerPoint Viewer 2010 (32-bit edition) |
|
For Microsoft Publisher 2010 Service Pack 2 (32-bit editions): |
|
For Microsoft Publisher 2010 Service Pack 2 (64-bit editions): |
Installation switches |
|
Restart requirement |
In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart. |
Removal information |
Use the Add or Remove Programs item in Control Panel. |
File information |
See Microsoft Knowledge Base article 3213626 |
Registry key verification |
Not applicable |
Microsoft Office 2013 (all editions)
Reference table
The following table contains the security update information for this software.
Security update file name |
Microsoft Office 2013 Service Pack 1 (32-bit editions): |
|
Microsoft Office 2013 Service Pack 1 (64-bit editions): |
Microsoft Excel 2013 (32-bit editions): |
|
|
Microsoft Excel 2013 (64-bit editions): |
|
Microsoft Outlook 2013 (32-bit editions): |
|
Microsoft Outlook 2013 (64-bit editions): |
|
Microsoft PowerPoint 2013 Service Pack 1 (32-bit editions) |
|
Microsoft PowerPoint 2013 Service Pack 1 (64-bit editions) |
Installation switches |
|
Restart requirement |
In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart. |
Removal information |
Use the Add or Remove Programs item in Control Panel. |
File information |
See Microsoft Knowledge Base article 3213564 |
Registry key verification |
Not applicable |
Microsoft Office 2013 RT (all editions)
Deployment |
The 3213564 update for Microsoft Office 2013 RT is available via Windows Update. |
Restart requirement |
In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart. |
Removal information |
Click Control Panel, click System and Security, click Windows Update, and then under "See also," click Installed updates, and then select from the list of updates. |
File information |
See Microsoft Knowledge Base article 3213564 |
Microsoft Office 2016 (all editions)
Reference table
The following table contains the security update information for this software.
Security update file name |
Microsoft Office 2016 (32-bit edition): |
|
For Microsoft Office 2016 (64-bit edition): |
|
For Microsoft Excel 2016 (32-bit edition): |
|
For Microsoft Excel 2016 (64-bit edition): |
|
For Microsoft Outlook 2016 (32-bit edition): |
|
For Microsoft Outlook 2016 (64-bit edition): |
|
Microsoft PowerPoint 2016 (32-bit edition): |
|
Microsoft PowerPoint 2016 (64-bit edition): |
Installation switches |
|
Restart requirement |
In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart. |
Removal information |
Use the Add or Remove Programs item in Control Panel. |
File information |
See Microsoft Knowledge Base article 3213551 |
Registry key verification |
Not applicable |
Microsoft SharePoint Server 2007 (all editions)
Reference table
The following table contains the security update information for this software.
Security update file name |
Excel Services on Microsoft SharePoint Server 2007 Service Pack 3 (32-bit edition): |
|
Excel Services on Microsoft SharePoint Server 2007 Service Pack 3 (64-bit edition): |
File Information |
|
Removal information |
This security update cannot be removed. |
Registry key verification |
Not applicable |
Microsoft SharePoint Server 2010 (all editions)
Reference table
The following table contains the security update information for this software.
Security update file name |
For Excel Services on Microsoft SharePoint Server 2010 Service Pack 2 |
Installation switches |
|
Restart requirement |
After you install this security update on all SharePoint servers, you must run the PSconfig tool to complete the installation process. You may have to restart the computer after you install this security update. In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message is displayed that advises you to restart the computer. |
Removal information |
This security update cannot be removed. |
File Information |
|
Registry key verification |
Not applicable |
Microsoft SharePoint Server 2013 (all editions)
Reference table
The following table contains the security update information for this software.
Security update file name |
For Microsoft SharePoint Enterprise Server 2013 Service Pack 1: |
|
For Microsoft SharePoint Foundation 2013 Service Pack 1 |
Installation switches |
|
Restart requirement |
In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart. |
Removal information |
This security update cannot be removed. |
File Information |
See Microsoft Knowledge Base article 4011113 |
Registry key verification |
Not applicable |
Microsoft SharePoint Server 2016 (all editions)
Reference table
The following table contains the security update information for this software.
Security update file name |
For Microsoft SharePoint Enterprise Server 2016: |
Installation switches |
|
Restart requirement |
After you install this security update on all SharePoint servers, you must run the PSconfig tool to complete the installation process. You may have to restart the computer after you install this security update. In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message is displayed that advises you to restart the computer. |
Removal information |
This security update cannot be removed. |
File Information |
|
Registry key verification |
Not applicable |
Microsoft Office Web Apps 2010 (all versions)
Reference table
The following table contains the security update information for this software.
Security update file name |
Microsoft Office Web Apps 2010 Service Pack 2: |
Installation switches |
|
Restart requirement |
In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart. |
Removal information |
This security update cannot be removed. |
File Information |
|
Registry key verification |
Not applicable |
Microsoft Office Web Apps 2013 (all versions)
Reference table
The following table contains the security update information for this software.
Security update file name |
For all supported editions of Microsoft Office Web Apps Server 2013 Service Pack 2: |
Installation switches |
|
Restart requirement |
In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart. |
Removal information |
This security update cannot be removed. |
File Information |
|
Registry key verification |
Not applicable |
Office Online Server
Reference table
The following table contains the security update information for this software.
Security update file name |
For all supported editions of Office Online Server: |
Installation switches |
|
Restart requirement |
In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart. |
Removal information |
This security update cannot be removed. |
File Information |
|
Registry key verification |
Not applicable |
Microsoft communications platforms and software
Reference table
The following table contains the security update information for this software.
Security update file name |
Microsoft Lync 2013 Service Pack 1 (32-bit): |
|
Microsoft Lync Basic 2013 Service Pack 1 (32-bit): |
|
Microsoft Lync 2013 Service Pack 1 (64-bit): |
|
Microsoft Lync Basic 2013 Service Pack 1 (64-bit): |
|
Skype for Business 2016 (32-bit) |
|
Skype for Business 2016 Basic (32-bit) |
|
Skype for Business 2016 (64-bit) |
|
Skype for Business 2016 Basic (64-bit) |
Installation switches |
|
Restart requirement |
In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart. |
Removal information |
This security update cannot be removed. |
File Information |
See Microsoft Knowledge Base article 4011107 |
Registry key verification |
Not applicable |
Office for Mac 2011
Prerequisites
Before you install the Office for Mac 2011 14.7.7 update on your computer, you must uninstall any version of Office for Mac 2011 that's earlier than Office for Mac 2011 14.0.4. Additionally, you must make sure that the computer is running Mac OS X 10.5 or a later version of the Mac OS X operating system.
To verify that the computer meets the operating system version prerequisite, click About This Mac on the Apple menu.
To determine the version of Office for Mac 2011 that's installed on your computer, follow these steps:
-
On the Go menu, click Applications.
-
Start Office for Mac 2011.
-
On the Office menu, click About Office.
The version number of Office for Mac 2011 is displayed in the About Office dialog box.
Installing the update
Download and install the Microsoft Office for Mac 2011 14.7.7 Update from the Microsoft Download Center.
-
Quit any applications that are running, including all Office applications, Microsoft Messenger, and Office Notifications, because they might interfere with the installation.
-
Make sure that your computer meets the minimum system requirements.
-
Click Download, or click the link for the language version that you want.
-
Follow the instructions on the screen to save the file to your hard disk. If you are using Safari, the downloaded file is saved to the desktop unless you specified a different location in the Preferences dialog box. To check your preferences, on the Safari menu, click Preferences, and then click General.
-
Double-click the file that you downloaded in step 4 to place the Microsoft Office for Mac 2011 Update volume on your desktop, and then double-click the volume to open it. This step might have been performed for you.
-
In the Microsoft Office for Mac 2011 Update volume window, double-click the Office for Mac 2011 Update application to start the update process, and then follow the instructions on the screen.
-
If the installation finishes successfully, you can remove the update installer from your hard disk. To remove the update installer, first drag the Microsoft Office for Mac 2011 update volume to the Trash, and then drag the file that you downloaded to the Trash.
Note This update is also available from Microsoft AutoUpdate, an application that can automatically keep your Microsoft software up to date. To use AutoUpdate, open Microsoft Office, and then on the Help menu, click Check for Updates.
Verifying update installation
To verify that a security update is installed on an affected system, follow these steps:
-
On the Go menu, click Applications.
-
Start Office for Mac 2011.
-
On the Office menu, click About Office.
The version number of Office for Mac 2011 is displayed in the About Office dialog box. If the Latest Installed Update Version number is 2011 14.7.7, the update has been successfully installed.
Restart requirement
After you install the Office for Mac 2011 14.7.7 update, we recommend that you restart the computer before you sign in to Office for Mac 2011.
Removing the update
To uninstall the update, drag the Office for Mac 2011 file that you downloaded to the Trash.
Additional information
If you have technical questions or problems downloading or using this update, see Microsoft for Mac Support to learn about the support options that are available to you.
.NET deployment tables – Security Only Release
Windows Server 2008 (all editions)
Reference table
The following table contains the security update information for .NET Framework installations running on all supported versions of Windows Server 2008 Service Pack 2 for the Security Only Release.
Security update file names |
For Microsoft .NET Framework 2.0 Service Pack 2 on Windows Server 2008 for 32-bit Systems Service Pack 2: |
|
For Microsoft .NET Framework 4.5.2 when installed on all supported 32-bit editions of Windows Server 2008 Service Pack 2: |
|
For Microsoft .NET Framework 4.6 when installed on all supported 32-bit editions of Windows Server 2008 Service Pack 2: |
|
For Microsoft .NET Framework 2.0 Service Pack 2 on Windows Server 2008 for x64-based Systems Service Pack 2: |
|
For Microsoft .NET Framework 4.5.2 on all supported x64-based editions of Windows Server 2008 Service Pack 2: |
|
For Microsoft .NET Framework 4.6 on all supported x64-based editions of Windows Server 2008 Service Pack 2: |
|
For Microsoft .NET Framework 2.0 Service Pack 2 on Windows Server 2008 for Itanium-based Systems Service Pack 2: |
Installation switches |
|
Update log file |
For Microsoft .NET Framework 2.0 Service Pack 2: |
|
For Microsoft .NET Framework 4.5.2: |
|
For Microsoft .NET Framework 4.6: |
Restart requirement |
This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart. |
Removal information |
Click Control Panel, and then click Security. Under "Windows Update," click View installed updates, and then select from the list of updates. |
File information |
See Microsoft Knowledge Base article 4040964 |
Registry key verification |
For Microsoft .NET Framework 2.0 Service Pack 2 (4040964): |
|
For Microsoft .NET Framework 4.5.2: |
|
For Microsoft .NET Framework 4.6: |
Windows 7 Service Pack 1 (.NET Framework installations)
Reference table
The following table contains the security update information for .NET Framework installations running on all supported versions of Windows 7 Service Pack 1 for the Security Only Release.
Security update file name |
For Microsoft .NET Framework 3.5.1 on all supported 32-bit editions of Windows 7 Service Pack 1: |
|
For Microsoft .NET Framework 4.5.2 when installed on all supported 32-bit editions of Windows 7 Service Pack 1: |
|
For Microsoft .NET Framework 4.6/4.6.1/4.6.2/4.7 when installed on all supported 32-bit editions of Windows 7 Service Pack 1: |
|
For Microsoft .NET Framework 3.5.1 on all supported x64-based editions of Windows 7 Service Pack 1: |
|
For Microsoft .NET Framework 4.5.2 when installed on all supported x64-based editions of Windows 7 Service Pack 1: |
|
For Microsoft .NET Framework 4.6/4.6.1/4.6.2/4.7 when installed on all supported x64-based editions of Windows 7 Service Pack 1: |
Installation switches |
|
Update log file |
For Microsoft .NET Framework 3.5.1: |
|
For Microsoft .NET Framework 4.5.2: |
|
For Microsoft .NET Framework 4.6/4.6.1: |
|
For Microsoft .NET Framework 4.6.2: |
Restart requirement |
This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart. |
Removal information |
Click Control Panel, click System and Security, and then under "Windows Update," click View installed updates, and then select from the list of updates. |
File information |
See Microsoft Knowledge Base article 4040966 |
Registry key verification |
For Microsoft .NET Framework 3.5.1: |
|
For Microsoft .NET Framework 4.5.2: |
|
For Microsoft .NET Framework 4.6/4.6.1/4.6.2/4.7: |
Windows Server 2008 R2 (.NET Framework installations)
Reference table
The following table contains the security update information for .NET Framework installations running on all supported versions of Windows Server 2008 R2 for the Security Only Release.
Security update file name |
For Microsoft .NET Framework 3.5.1 on all supported x64-based editions of Windows Server 2008 R2 Service Pack 1: |
|
For Microsoft .NET Framework 4.5.2 when installed on all supported x64-based editions of Windows Server 2008 R2 Service Pack 1: |
|
For Microsoft .NET Framework 4.6/4.6.1/4.6.2/4.7 when installed on all supported 32-bit editions of Windows 7 Service Pack 1: |
|
For Microsoft .NET Framework 3.5.1 on Windows Server 2008 R2 for Itanium-based Systems Service Pack 1: |
Installation switches |
|
Update log file |
For Microsoft .NET Framework 3.5.1: |
|
For Microsoft .NET Framework 4.5.2: |
|
For Microsoft .NET Framework 4.6/4.6.1/4.6.2/4.7: |
Restart requirement |
This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart. |
Removal information |
Click Control Panel, click System and Security, and then under "Windows Update," click View installed updates, and then select from the list of updates. |
File information |
See Microsoft Knowledge Base article 4040966 |
Registry key verification |
For Microsoft .NET Framework 3.5.1: |
|
For Microsoft .NET Framework 4.5.2: |
|
For Microsoft .NET Framework 4.6/4.6.1/4.6.2/4.7 : |
Windows 8.1 (.NET Framework installations)
Reference table
The following table contains the security update information for .NET Framework installations running on all supported versions of Windows 8.1 for the Security Only Release.
Security update file name |
For Microsoft .NET Framework 3.5 on Windows 8.1 for 32-bit Systems: |
|
For Microsoft .NET Framework 4.5.2 on Windows 8.1 for 32-bit Systems: |
|
For Microsoft .NET Framework 4.6/4.6.1/4.6.2/4.7 on Windows 8.1 for 32-bit Systems: |
|
For Microsoft .NET Framework 3.5 on Windows 8.1 for x64-based Systems: |
|
For Microsoft .NET Framework 4.5.2 on Windows 8.1 for x64-based Systems: |
|
For Microsoft .NET Framework 4.6/4.6.1/4.6.2/4.7 on Windows 8.1 for x64-based Systems: |
Installation switches |
|
Restart requirement |
This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart. |
Removal information |
Click Control Panel, click System and Security, and then under "Windows Update," click View update history, and then select from the list of updates. |
File information |
See Microsoft Knowledge Base article 4040967 |
Registry key verification |
These updates do not add a registry key to validate their installation. Use WMI to detect for the presence of these updates. |
Windows Server 2012 and Windows Server 2012 R2 (.NET Framework installations)
Reference table
The following table contains the security update information for .NET Framework installations running on all supported versions of Windows Server 2012 and Windows Server 2012 R2 for the Security Only Release.
Security update file name |
For Microsoft .NET Framework 3.5 on Windows Server 2012: |
|
For Microsoft .NET Framework 4.5.2 on Windows Server 2012: |
|
For Microsoft .NET Framework 4.6/4.6.1/4.6.2/4.7 on Windows Server 2012: |
|
For Microsoft .NET Framework 3.5 on Windows Server 2012 R2: |
|
For Microsoft .NET Framework 4.5.2 on Windows Server 2012 R2: |
|
For Microsoft .NET Framework 4.6/4.6.1/4.6.2/4.7 on Windows Server 2012 R2: |
Installation switches |
|
Restart requirement |
This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart. |
Removal information |
Click Control Panel, click System and Security, and then under "Windows Update," click View update history, and then select from the list of updates. |
File information |
See Microsoft Knowledge Base article 4040965 |
Registry key verification |
These updates do not add a registry key to validate their installation. Use WMI to detect for the presence of these updates. |
.NET Deployment tables – Monthly Rollup
Windows Server 2008 (all editions)
Reference table
The following table contains the security update information for .NET Framework installations running on all supported versions of Windows Server 2008 Service Pack 2 for the Monthly Rollup.
Security update file names |
For Microsoft .NET Framework 2.0 Service Pack 2 on Windows Server 2008 for 32-bit Systems Service Pack 2: |
|
For Microsoft .NET Framework 4.5.2 when installed on all supported 32-bit editions of Windows Server 2008 Service Pack 2: |
|
For Microsoft .NET Framework 4.6 when installed on all supported 32-bit editions of Windows Server 2008 Service Pack 2: |
|
For Microsoft .NET Framework 2.0 Service Pack 2 on Windows Server 2008 for x64-based Systems Service Pack 2: |
|
For Microsoft .NET Framework 4.5.2 on all supported x64-based editions of Windows Server 2008 Service Pack 2: |
|
For Microsoft .NET Framework 4.6 on all supported x64-based editions of Windows Server 2008 Service Pack 2: |
|
For Microsoft .NET Framework 2.0 Service Pack 2 on Windows Server 2008 for Itanium-based Systems Service Pack 2: |
Installation switches |
|
Update log file |
For Microsoft .NET Framework 2.0 Service Pack 2: |
|
For Microsoft .NET Framework 4.5.2: |
|
For Microsoft .NET Framework 4.6: |
Restart requirement |
This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart. |
Removal information |
Click Control Panel, and then click Security. Under "Windows Update," click View installed updates, and then select from the list of updates. |
File information |
See Microsoft Knowledge Base article 4040978 |
Registry key verification |
For Microsoft .NET Framework 2.0 Service Pack 2 (4040978): |
|
For Microsoft .NET Framework 4.5.2: |
|
For Microsoft .NET Framework 4.6: |
Windows 7 Service Pack 1 (.NET Framework installations)
Reference table
The following table contains the security update information for .NET Framework installations running on all supported versions of Windows 7 Service Pack 1 for the Monthly Rollup.
Security update file name |
For Microsoft .NET Framework 3.5.1 on all supported 32-bit editions of Windows 7 Service Pack 1: |
|
For Microsoft .NET Framework 4.5.2 when installed on all supported 32-bit editions of Windows 7 Service Pack 1: |
|
For Microsoft .NET Framework 4.6/4.6.1/4.6.2/4.7 when installed on all supported 32-bit editions of Windows 7 Service Pack 1: |
|
For Microsoft .NET Framework 3.5.1 on all supported x64-based editions of Windows 7 Service Pack 1: |
|
For Microsoft .NET Framework 4.5.2 when installed on all supported x64-based editions of Windows 7 Service Pack 1: |
|
For Microsoft .NET Framework 4.6/4.6.1/4.6.2/4.7 when installed on all supported x64-based editions of Windows 7 Service Pack 1: |
Installation switches |
|
Update log file |
For Microsoft .NET Framework 3.5.1: |
|
For Microsoft .NET Framework 4.5.2: |
|
For Microsoft .NET Framework 4.6/4.6.1: |
|
For Microsoft .NET Framework 4.6.2: |
Restart requirement |
This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart. |
Removal information |
Click Control Panel, click System and Security, and then under "Windows Update," click View installed updates, and then select from the list of updates. |
File information |
See Microsoft Knowledge Base article 4040980 |
Registry key verification |
This update does not add a registry key to validate its installation. Use WMI to detect for the presence of this update. |
|
For Microsoft .NET Framework 4.5.2: |
|
For Microsoft .NET Framework 4.6/4.6.1/4.6.2/4.7: |
Windows Server 2008 R2 (.NET Framework Installations)
Reference table
The following table contains the security update information for .NET Framework installations running on all supported versions of Windows Server 2008 for the Monthly Rollup.
Security update file name |
For Microsoft .NET Framework 3.5.1 on all supported x64-based editions of Windows Server 2008 R2 Service Pack 1: |
|
For Microsoft .NET Framework 4.5.2 when installed on all supported x64-based editions of Windows Server 2008 R2 Service Pack 1: |
|
For Microsoft .NET Framework 4.6/4.6.1/4.6.2/4.7 on all supported x64-based editions of Windows Server 2008 R2 Service Pack 1: |
|
For Microsoft .NET Framework 3.5.1 on Windows Server 2008 R2 for Itanium-based Systems Service Pack 1: |
Installation switches |
|
Update log file |
For Microsoft .NET Framework 3.5.1: |
|
For Microsoft .NET Framework 4.5.2: |
|
For Microsoft .NET Framework 4.6/4.6.1/4.6.2/4.7: |
Restart requirement |
This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart. |
Removal information |
Click Control Panel, click System and Security, and then under "Windows Update," click View installed updates, and then select from the list of updates. |
File information |
See Microsoft Knowledge Base article 4040980 |
Registry key verification |
This update does not add a registry key to validate its installation. Use WMI to detect for the presence of this update. |
|
For Microsoft .NET Framework 4.5.2: |
|
For Microsoft .NET Framework 4.6/4.6.1/4.6.2/4.7: |
Windows 8.1 (.NET Framework installations)
Reference table
The following table contains the security update information for .NET Framework installations running on all supported versions of Windows 8.1 for the Monthly Rollup.
Security update file name |
For Microsoft .NET Framework 3.5 on Windows 8.1 for 32-bit Systems: |
|
For Microsoft .NET Framework 4.5.2 on Windows 8.1 for 32-bit Systems: |
|
For Microsoft .NET Framework 4.6/4.6.1/4.6.2/4.7 on Windows 8.1 for 32-bit Systems: |
|
For Microsoft .NET Framework 3.5 on Windows 8.1 for x64-based Systems: |
|
For Microsoft .NET Framework 4.5.2 on Windows 8.1 for x64-based Systems: |
|
For Microsoft .NET Framework 4.6/4.6.1/4.6.2/4.7 on Windows 8.1 for x64-based Systems: |
Installation switches |
|
Restart requirement |
This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart. |
Removal information |
Click Control Panel, click System and Security, and then under "Windows Update," click View update history, and then select from the list of updates. |
File information |
See Microsoft Knowledge Base article 4040981 |
Registry key verification |
These updates do not add a registry key to validate their installation. Use WMI to detect for the presence of these updates. |
Windows Server 2012 and Windows Server 2012 R2 (.NET Framework installations)
Reference table
The following table contains the security update information for .NET Framework installations running on all supported versions of Windows Server 2012 and Windows Server 2012 R2 for the Monthly Rollup.
Security update file name |
For Microsoft .NET Framework 3.5 on Windows Server 2012: |
|
For Microsoft .NET Framework 4.5.2 on Windows Server 2012: |
|
For Microsoft .NET Framework 4.6/4.6.1/4.6.2/4.7 on Windows Server 2012: |
|
For Microsoft .NET Framework 3.5 on Windows Server 2012 R2: |
|
For Microsoft .NET Framework 4.5.2 on Windows Server 2012 R2: |
|
For Microsoft .NET Framework 4.6/4.6.1/4.6.2/4.7 on Windows Server 2012 R2: |
Installation switches |
|
Restart requirement |
This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart. |
Removal information |
Click Control Panel, click System and Security, and then under "Windows Update," click View update history, and then select from the list of updates. |
File information |
See Microsoft Knowledge Base article 4040979 |
Registry key verification |
These updates do not add a registry key to validate their installation. Use WMI to detect for the presence of these updates. |
Windows RT 8.1 (all editions)
Reference table
The following table contains the security update information for .NET Framework installations running on Windows RT 8.1 for the Monthly Rollup.
Deployment |
The 4040974 update is available via Windows Update only. |
Restart Requirement |
You must restart the system after applying this security update. |
Removal Information |
See Microsoft Knowledge Base article 4040974 |
File Information |
See the individual Knowledge Base articles that are listed in the “Additional information about this security update” section. |
Windows 10 (.NET Framework installations)
Reference table
The following table contains the security update information for .NET Framework installations running on all supported versions of Windows 10.
Security update file name |
For Microsoft .NET Framework 3.5 on all supported editions of Windows 10 for 32-bit Systems: |
|
For Microsoft .NET Framework 3.5 on all supported editions of Windows 10 for x64-based Systems: |
|
For Microsoft .NET Framework 4.6 on all supported editions of Windows 10 for 32-bit Systems: |
|
For Microsoft .NET Framework 4.6 on all supported editions of Windows 10 for x64-based Systems: |
|
For Microsoft .NET Framework 3.5 on all supported 32-bit editions of Windows 10 version 1511: |
|
For Microsoft .NET Framework 3.5 on all supported x64-based editions of Windows 10 Version 1511: |
|
For Microsoft .NET Framework 4.6.1 on all supported 32-bit editions of Windows 10 version 1511: |
|
For Microsoft .NET Framework 4.6.1 on all supported x64-based editions of Windows 10 Version 1511: |
|
For Microsoft .NET Framework 3.5 on all supported 32-bit editions of Windows 10 version 1607: |
|
For Microsoft .NET Framework 3.5 on all supported x64-based editions of Windows 10 Version 1607: |
|
For Microsoft .NET Framework 4.6.2/4.7 on all supported 32-bit editions of Windows 10 version 1607: |
|
For Microsoft .NET Framework 4.6.2/4.7 on all supported x64-based editions of Windows 10 Version 1607: |
|
For Microsoft .NET Framework 3.5 on all supported 32-bit editions of Windows 10 version 1703: |
|
For Microsoft .NET Framework 3.5 on all supported x64-based editions of Windows 10 Version 1703: |
|
For Microsoft .NET Framework 4.7 on all supported 32-bit editions of Windows 10 version 1703: |
|
For Microsoft .NET Framework 4.7 on all supported x64-based editions of Windows 10 Version 1703: |
Installation switches |
For Microsoft .NET Framework, see Microsoft Knowledge Base article 2844699 |
Restart requirement |
Yes, you must restart your system after you apply this security update. |
Removal information |
To uninstall an update that is installed by WUSA, use the /Uninstall setup switch. Or click Control Panel, click System and Security, and then under "Windows Update," click View installed updates, and then select from the list of updates. |
File information |
See Microsoft Knowledge Base article 4038781 |
Registry key verification |
These updates do not add a registry key to validate their installation. |
Windows Server 2016
Reference table
The following table contains the security update information for .NET Framework installations running on all supported versions of Windows 10.
Security update file name |
For Microsoft .NET Framework 3.5 on Windows Server 2016: |
|
For Microsoft .NET Framework 4.6.2/4.7 on Windows Server 2016: |
Installation switches |
For Microsoft .NET Framework, see Microsoft Knowledge Base article 2844699 |
Restart requirement |
Yes, you must restart your system after you apply this security update. |
Removal information |
To uninstall an update that is installed by WUSA, use the /Uninstall setup switch. Or click Control Panel, click System and Security, and then under "Windows Update," click View installed updates, and then select from the list of updates. |
File information |
|
Registry key verification |
These updates do not add a registry key to validate their installation. |
Microsoft Exchange Server deployment tables
Microsoft Exchange Server 2013
Reference table
The following table contains the security update information for this software.
Inclusion in Future Service Packs |
The update for this issue will be included in a future service pack or update rollup |
Security update file name |
For Microsoft Exchange Server 2013 Service Pack 1: |
|
For Microsoft Exchange Server 2013 Cumulative Update 16 and Cumulative Update 17: |
Installation switches |
|
Restart requirement |
In some cases, this update does not require a system restart. If the required files are being used, this update will require a system restart. If this behavior occurs, you receive a message that advises you to restart your system. |
Update log file |
KB4036108.log |
Removal information |
Use the Add or Remove Programs item in Control Panel. |
File information |
|
Registry key verification |
For supported editions of Microsoft Exchange Server 2013: |
Microsoft Exchange Server 2016
Reference table
The following table contains the security update information for this software.
Inclusion in Future Service Packs |
The update for this issue will be included in a future service pack or update rollup |
|
For Microsoft Exchange Server 2016 Cumulative Update 5: |
Security update file name |
For Microsoft Exchange Server 2016 Cumulative Update 6: |
Installation switches |
|
Restart requirement |
In some cases, this update does not require a system restart. If the required files are being used, this update will require a system restart. If this behavior occurs, you receive a message that advises you to restart your system. |
Update log file |
KB4036108.log |
Removal information |
Use the Add or Remove Programs item in Control Panel. |
File information |
|
Registry key verification |
For supported editions of Microsoft Exchange Server 2016: |
Adobe Flash
Reference table
The following table contains the security update information for this software.
Security update file name |
For Adobe Flash Player installed on Windows 8.1 for 32-bit systems: |
|
For Adobe Flash Player installed on Windows 8.1 for x64-based systems: |
|
For Adobe Flash Player installed on Windows RT 8.1: |
|
For Adobe Flash Player installed on Windows Server 2012: |
|
For Adobe Flash Player installed on Windows Server 2012 R2: |
|
For Adobe Flash Player installed on Windows 10 for 32-bit Systems: |
|
For Adobe Flash Player installed on Windows 10 for x64-based Systems: |
|
For Adobe Flash Player installed on Windows 10 Version 1511 for 32-bit Systems: |
|
For Adobe Flash Player installed on Windows 10 Version 1511 for x64-based Systems: |
|
For Adobe Flash Player installed on Windows 10 Version 1607 for 32-bit Systems: |
|
For Adobe Flash Player installed on Windows 10 Version 1607 for x64-based Systems: |
|
For Adobe Flash Player installed on Windows 10 Version 1703 for 32-bit Systems: |
|
For Adobe Flash Player installed on Windows 10 Version 1703 for x64-based Systems: |
|
For Adobe Flash Player installed on Windows Server 2016: |
Installation switches |
|
Restart requirement |
You must restart the system after you apply this security update. |
Removal information |
Use the Add or Remove Programs item in Control Panel. |
File information |
|
Registry key verification |
This update does not add a registry key to validate its installation. Use WMI to detect this update. |