This article describes how to configure Windows XP TCP/IP to use Domain Name Service (DNS).
How to configure TCP/IP
To configure TCP/IP, follow these steps:
- Click Start, click Control Panel, click Network and Internet Connections, and then click Network Connections.
- Right-click the network connection that you want to configure, and then click Properties.
- On the General tab (for a local area connection), or the Networking tab (for all other connections), click Internet Protocol (TCP/IP), and then click Properties.
- If you want to obtain DNS server addresses from a DHCP server, click Obtain DNS server address automatically.
- If you want to manually configure DNS server addresses, click Use the following DNS server addresses, and then type the preferred DNS server and alternate DNS server IP addresses in the Preferred DNS server and Alternate DNS server boxes.
How to configure the advanced DNS properties
To configure the advanced DNS properties, follow these steps:
- Click Advanced, and then click the DNS tab.
- Configure the DNS properties by following the steps that are described in the following sections:
How to configure an additional DNS server IP address
To configure an additional DNS server IP address, follow these steps:
- Under DNS server addresses, click Add in order of use.
- In the TCP/IP DNS server box, type the IP address of the DNS server, and then click Add.
How to modify the resolution behavior for unqualified DNS names
To modify the resolution behavior for unqualified DNS names, follow these steps:
- To resolve an unqualified name by appending the primary DNS suffix and the DNS suffix of each connection, click Append primary and connection specific DNS suffixes. To do this, each connection must be configured. If you also want to search the parent suffixes of the primary DNS suffix up to the second-level domain, click to select the Append parent suffixes of the primary DNS suffix check box.
- To resolve an unqualified name by appending the suffixes from a list of configured suffixes, click Append these DNS suffixes (in order), and then click Add to add suffixes to the list.
- To configure a connection-specific DNS suffix, type the DNS suffix
in the DNS suffix for this connection box.
How to modify DNS dynamic update behavior
To modify DNS dynamic update behavior, use any of the following methods:
- To use a DNS dynamic update to register the IP addresses of this connection and the primary domain name of the computer, select the Register this connection's addresses in DNS check box. By default, this check box is not selected. The primary domain name of the computer is the primary DNS suffix appended to the computer name. To view this domain name and DNS suffix together as the full computer name, click Start, click Control Panel, click Performance and Maintenance, click System, and then click the Computer Name tab.
- To use a DNS dynamic update to register the IP addresses and the connection-specific domain name of this connection, select the Use this connection's DNS suffix in DNS registration check box. By default, this check box is not selected. The connection-specific domain name of this connection is the DNS suffix for this connection appended to the computer name.
To disable DNS dynamic update for all names on the computer, clear the Register this connection's addresses in DNS
and the Use this connection's DNS suffix in DNS registration
check boxes on the DNS
tab for all connections in Network Connections
You must be logged on as an administrator or as a member of the Administrators group to use this procedure. If your computer is connected to a network, network policy settings may also prevent you from using this procedure.
Article ID: 305553 - Last Review: May 22, 2013 - Revision: 3.0
- Microsoft Windows XP Professional
|kbenv kbnetwork kbhowtomaster KB305553|