MS15-080: Vulnerabilities in Microsoft graphics component could allow remote code execution: August 11, 2015

Security update file names

For all supported 32-bit editions of Windows Vista:
Windows6.0-KB3078601-x86.msu

For Microsoft .NET Framework 3.0 Service Pack 2 when installed on all supported 32-bit editions of Windows Vista:
Windows6.0-KB3072303-x86.msu

For Microsoft .NET Framework 4 when installed on all supported 32-bit editions of Windows Vista:
NDP40-KB3072309-x86.exe

For Microsoft .NET Framework 4.5/4.5.1/4.5.2 when installed on all supported 32-bit editions of Windows Vista:
NDP45-KB3072310-x86.exe

For Microsoft .NET Framework 4.6 RC and 4.6 when installed on all supported 32-bit editions of Windows Vista:
NDP46-KB3072311-x86.exe

For all supported x64-based editions of Windows Vista:
Windows6.0-KB3078601-x64.msu

For Microsoft .NET Framework 3.0 Service Pack 2 when installed on all supported x64-based editions of Windows Vista:
Windows6.0-KB3072303-x64.msu

For Microsoft .NET Framework 4 when installed on all supported x64-based editions of Windows Vista:
NDP40-KB3072309-x64.exe

For Microsoft .NET Framework 4.5/4.5.1/4.5.2 when installed on all supported x64-based editions of Windows Vista:
NDP45-KB3072310-x64.exe

For Microsoft .NET Framework 4.6 RC and 4.6 when installed on all supported x64-based editions of Windows Vista:
NDP46-KB3072311-x64.exe

Installation switches

For Microsoft Windows, see Microsoft Knowledge Base Article 934307

For Microsoft .NET Framework, see Microsoft Knowledge Base Article 2844699

Update log file

For Windows Vista:
Not applicable

For Microsoft .NET Framework 3.0 Service Pack 2:
Microsoft .NET Framework 3.0-KB3072303_*-msi0.txt
Microsoft .NET Framework 3.0-KB3072303_*.html

For Microsoft .NET Framework 4:
KB3072309_*_*-Microsoft .NET Framework 4 Client Profile-MSP0.txt
KB3072309_*_*.html

For Microsoft .NET Framework 4.5/4.5.1/4.5.2:
KB3072310_*_*-Microsoft .NET Framework [.NET target version]-MSP0.txt
KB3072310_*_*.html

For Microsoft .NET Framework 4.6 RC and 4.6:
KB3072311_*_*-Microsoft .NET Framework [.NET target version]-MSP0.txt
KB3072311_*_*.html

Restart requirement

For Windows Vista:
Yes, you must restart your system after you apply this security update.

For Microsoft .NET Framework:
This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

Removal information

For Windows Vista:
WUSA.exe does not support uninstall of updates. To uninstall an update installed by WUSA, click Control Panel, and then click Security. Under Windows Update, click View installed updates and select from the list of updates.

For Microsoft .NET Framework:
Click Control Panel, and then click Security. Under Windows Update, click View installed updates and select from the list of updates.

File information

See Microsoft Knowledge Base Article 3078601
See Microsoft Knowledge Base Article 3072303
See Microsoft Knowledge Base Article 3072309
See Microsoft Knowledge Base Article 3072310
See Microsoft Knowledge Base Article 3072311

Registry key verification

For Windows Vista:
A registry key does not exist to validate the presence of this update.

For Microsoft .NET Framework 3.0 Service Pack 2:
A registry key does not exist to validate the presence of this update. Use WMI to detect for the presence of this update. HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework 3.0 Service Pack 2\SP2\KB3072303
"ThisVersionInstalled" = "Y"

For Microsoft .NET Framework 4 when installed on all supported 32-bit editions of Windows Vista:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework 4 Client Profile\KB3072309
"ThisVersionInstalled" = "Y"

For Microsoft .NET Framework 4 when installed on all supported x64-based editions of Windows Vista:
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Updates\Microsoft .NET Framework 4 Client Profile\KB3072309
"ThisVersionInstalled" = "Y"

For Microsoft .NET Framework 4.5/4.5.1/4.5.2:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework [.NET target version]\KB3072310
"ThisVersionInstalled" = "Y"

For Microsoft .NET Framework 4.6 RC and 4.6:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework 4.6\KB3072311
"ThisVersionInstalled" = "Y"

Security update file names

For all supported 32-bit editions of Windows Server 2008:
Windows6.0-KB3078601-x86.msu

For Microsoft .NET Framework 3.0 Service Pack 2 on Windows Server 2008 for 32-bit Systems Service Pack 2:
Windows6.0-KB3072303-x86.msu

For Microsoft .NET Framework 4 when installed on all supported 32-bit editions of Windows Server 2008 Service Pack 2:
NDP40-KB3072309-x86.exe

For Microsoft .NET Framework 4.5/4.5.1/4.5.2 when installed on all supported 32-bit editions of Windows Server 2008 Service Pack 2:
NDP45-KB3072310-x86.exe

For Microsoft .NET Framework 4.6 RC and 4.6 when installed on all supported 32-bit editions of Windows Server 2008 Service Pack 2:
NDP46-KB3072311-x86.exe

For all supported x64-based editions of Windows Server 2008:
Windows6.0-KB3078601-x64.msu

For Microsoft .NET Framework 3.0 Service Pack 2 on Windows Server 2008 for x64-based Systems Service Pack 2:
Windows6.0-KB3072303-x64.msu

For Microsoft .NET Framework 4 when installed on all supported x64-based editions of Windows Server 2008 Service Pack 2:
NDP40-KB3072309-x64.exe

For Microsoft .NET Framework 4.5/4.5.1/4.5.2 on all supported x64-based editions of Windows Server 2008 Service Pack 2:
NDP45-KB3072310-x64.exe

For Microsoft .NET Framework 4.6 RC and 4.6 on all supported x64-based editions of Windows Server 2008 Service Pack 2:
NDP46-KB3072311-x64.exe

For all supported Itanium-based editions of Windows Server 2008:
Windows6.0-KB3078601-ia64.msu

Installation switches

For Microsoft Windows, see Microsoft Knowledge Base Article 934307

For Microsoft .NET Framework, see Microsoft Knowledge Base Article 2844699

Update log file

For Windows Server 2008:
Not applicable

For Microsoft .NET Framework 3.0 Service Pack 2:
Microsoft .NET Framework 3.0-KB3072303_*-msi0.txt
Microsoft .NET Framework 3.0-KB3072303_*.html

For Microsoft .NET Framework 4:
KB3072309_*_*-Microsoft .NET Framework 4 Client Profile-MSP0.txt
KB3072309_*_*.html

For Microsoft .NET Framework 4.5/4.5.1/4.5.2:
KB3048077_*_*-Microsoft .NET Framework [.NET target version]-MSP0.txt
KB3072310_*_*.html

For Microsoft .NET Framework 4.6 RC and 4.6:
KB3072311_*_*-Microsoft .NET Framework [.NET target version]-MSP0.txt
KB3072311_*_*.html

Restart requirement

For Windows Server 2008:
Yes, you must restart your system after you apply this security update.

For Microsoft .NET Framework:
This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

Removal information

For Windows Server 2008:
WUSA.exe does not support uninstall of updates. To uninstall an update installed by WUSA, click Control Panel, and then click Security. Under Windows Update, click View installed updates and select from the list of updates.

For Microsoft .NET Framework:
Click Control Panel, and then click Security. Under Windows Update, click View installed updates and select from the list of updates.

File information

See Microsoft Knowledge Base Article 3078601
See Microsoft Knowledge Base Article 3072303
See Microsoft Knowledge Base Article 3072309
See Microsoft Knowledge Base Article 3072310
See Microsoft Knowledge Base Article 3072311

Registry key verification

For Windows Server 2008:
A registry key does not exist to validate the presence of this update.

For Microsoft .NET Framework 3.0 Service Pack 2:
A registry key does not exist to validate the presence of this update. Use WMI to detect for the presence of this update.HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework 3.0 Service Pack 2\SP2\KB3048068
"ThisVersionInstalled" = "Y"

For Microsoft .NET Framework 4 when installed on all supported 32-bit editions of Windows Server 2008:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework 4 Client Profile\KB3072309
"ThisVersionInstalled" = "Y"

For Microsoft .NET Framework 4 when installed on all supported x64-based editions of Windows Server 2008:
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Updates\Microsoft .NET Framework 4 Client Profile\KB3072309
"ThisVersionInstalled" = "Y"

For Microsoft .NET Framework 4.5/4.5.1/4.5.2:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework [.NET target version]\KB3072310
"ThisVersionInstalled" = "Y"

For Microsoft .NET Framework 4.6 RC and 4.6:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework 4.6\KB3072311
"ThisVersionInstalled" = "Y"

Security update file name

For all supported 32-bit editions of Windows 7:
Windows6.1-KB3078601-x86.msu

For Microsoft .NET Framework 3.5.1 on all supported 32-bit editions of Windows 7 Service Pack 1:
Windows6.1-KB3072305-x86.msu

For all supported x64-based editions of Windows 7:
Windows6.1-KB3078601-x64.msu

For Microsoft .NET Framework 3.5.1 on all supported x64-based editions of Windows 7 Service Pack 1:
Windows6.1-KB3072305-x64.msu

Installation switches

For Microsoft Windows, see Microsoft Knowledge Base Article 934307

For Microsoft .NET Framework, see Microsoft Knowledge Base Article 2844699

Update log file

For Windows 7:
Not applicable

For Microsoft .NET Framework 3.5.1:
Not applicable.

Restart requirement

For Windows 7:
Yes, you must restart your system after you apply this security update.

For Microsoft .NET Framework:
This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

Removal information

For Windows 7:
To uninstall an update installed by WUSA, use the /Uninstall setup switch or click Control Panel, click System and Security, and then under Windows Update, click View installed updates and select from the list of updates.

For Microsoft .NET Framework:
Click Control Panel, click System and Security, and then under Windows Update, click View installed updates and select from the list of updates.

File information

See Microsoft Knowledge Base Article 3078601
See Microsoft Knowledge Base Article 3072305

Registry key verification

For Windows 7:
A registry key does not exist to validate the presence of this update.

For Microsoft .NET Framework 3.5.1:

A registry key does not exist to validate the presence of this update. Use WMI to detect for the presence of this update.

Security update file name

For all supported x64-based editions of Windows Server 2008 R2:
Windows6.1-KB3078601-x64.msu

For Microsoft .NET Framework 3.5.1 on all supported x64-based editions of Windows Server 2008 R2 Service Pack 1:
Windows6.1-KB3072305-x64.msu

For all supported Itanium-based editions of Windows Server 2008 R2:
Windows6.1-KB3078601-ia64.msu

Installation switches

For Microsoft Windows, see Microsoft Knowledge Base Article 934307

For Microsoft .NET Framework, see Microsoft Knowledge Base Article 2844699

Update log file

For Windows Server 2008 R2:
Not applicable

For Microsoft .NET Framework 3.5.1:
Not applicable

Restart requirement

For Windows Server 2008 R2:
Yes, you must restart your system after you apply this security update.

For Microsoft .NET Framework:
This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

Removal information

For Windows Server 2008 R2:
To uninstall an update installed by WUSA, use the /Uninstall setup switch or click Control Panel, click System and Security, and then under Windows Update, click View installed updates and select from the list of updates.

For Microsoft .NET Framework:
Click Control Panel, click System and Security, and then under Windows Update, click View installed updates and select from the list of updates.

File information

See Microsoft Knowledge Base Article 3078601
See Microsoft Knowledge Base Article 3072305

Registry key verification

For Windows Server 2008 R2:
A registry key does not exist to validate the presence of this update.

For Microsoft .NET Framework 3.5.1:
A registry key does not exist to validate the presence of this update. Use WMI to detect for the presence of this update.

Security update file name

For all supported 32-bit editions of Windows 8:
Windows8-RT-KB3078601-x86.msu

For Microsoft .NET Framework 3.5 on Windows 8 for 32-bit Systems:
Windows8-RT-KB3072306-x86.msu

For all supported x64-based editions of Windows 8:
Windows8-RT-KB3078601-x64.msu

For Microsoft .NET Framework 3.5 on Windows 8 for x64-based Systems:
Windows8-RT-KB3072306-x64.msu

For all supported 32-bit editions of Windows 8.1:
Windows8.1-KB3078601-x86.msu

For Microsoft .NET Framework 3.5 on Windows 8.1 for 32-bit Systems:
Windows8.1-KB3072307-x86.msu

For all supported x64-based editions of Windows 8.1:
Windows8.1-KB3078601-x64.msu

For Microsoft .NET Framework 3.5 on Windows 8.1 for x64-based Systems:
Windows8.1-KB3072307-x64.msu

Installation switches

For Microsoft Windows, see Microsoft Knowledge Base Article 934307

For Microsoft .NET Framework, see Microsoft Knowledge Base Article 2844699

Restart requirement

For Windows 8 and Windows 8.1:
Yes, you must restart your system after you apply this security update.

For Microsoft .NET Framework:
This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

Removal information

For Windows 8 and Windows 8.1:
To uninstall an update installed by WUSA, use the /Uninstall setup switch or click Control Panel, click System and Security, click Windows Update, and then under See also, click Installed updates and select from the list of updates.

For Microsoft .NET Framework:
Click Control Panel, click System and Security, and then under Windows Update, click View update history and select from the list of updates.

File information

See Microsoft Knowledge Base Article 3078601
See Microsoft Knowledge Base Article 3072306
See Microsoft Knowledge Base Article 3072307

Registry key verification

Registry keys do not exist to validate the presence of these updates.

Security update file name

For all supported editions of Windows Server 2012:
Windows8-RT-KB3078601-x64.msu

For Microsoft .NET Framework 3.5 on Windows Server 2012:
Windows8-RT-KB3072306-x64.msu

For all supported editions of Windows Server 2012 R2:
Windows8.1-KB3078601-x64.msu

For Microsoft .NET Framework 3.5 on Windows Server 2012 R2:
Windows8.1-KB3072307-x64.msu

Installation switches

For Microsoft Windows, see Microsoft Knowledge Base Article 934307

For Microsoft .NET Framework, see Microsoft Knowledge Base Article 2844699

Restart requirement

For Windows Server 2012 and Windows Server 2012 R2:
Yes, you must restart your system after you apply this security update.

For Microsoft .NET Framework:
This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

Removal information

For Windows Server 2012 and Windows Server 2012 R2:
To uninstall an update installed by WUSA, use the /Uninstall setup switch or click Control Panel, click System and Security, click Windows Update, and then under See also, click Installed updates and select from the list of updates.

For Microsoft .NET Framework:
Click Control Panel, click System and Security, and then under Windows Update, click View update history and select from the list of updates.

File information

See Microsoft Knowledge Base Article 3078601
See Microsoft Knowledge Base Article 3072306
See Microsoft Knowledge Base Article 3072307

Registry key verification

Registry keys do not exist to validate the presence of these updates.

Deployment

The 3078601 update is available via Windows Update only.

Restart Requirement

Yes, you must restart your system after you apply this security update.

Removal Information

Click Control Panel, click System and Security, click Windows Update, and then under See also, click Installed updates and select from the list of updates.

File Information

See Microsoft Knowledge Base Article 3078601

Security update file name

For all supported editions of Microsoft Office 2007:
ogl2007-kb3054890-fullfile-x86-glb.exe

Installation switches

See Microsoft Knowledge Base Article 912203

Restart requirement

In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

To help reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base Article 887012.

Removal information

Use Add or Remove Programs item in Control Panel.

File information

See Microsoft Knowledge Base Article 3054890

Registry key verification

Not applicable

Security update file name

For all supported editions of Microsoft Office 2010 (32-bit editions):
ogl2010-kb3054846-fullfile-x86-glb.exe

For all supported editions of Microsoft Office 2010 (64-bit editions):
ogl2010-kb3054846-fullfile-x64-glb.exe

Installation switches

See Microsoft Knowledge Base Article 912203

Restart requirement

In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

To help reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base Article 887012.

Removal information

Use Add or Remove Programs item in Control Panel.

File information

See Microsoft Knowledge Base Article 3054846

Registry key verification

Not applicable

Security update file name

For Microsoft Live Meeting 2007 Console (3075591):
LMSetup.exe

For Microsoft Lync 2010 (32-bit) (3075593):
lync.msp

For Microsoft Lync 2010 (64-bit) (3075593):
lync.msp

For Microsoft Lync 2010 Attendee (user level install) (3075592):
AttendeeUser.msp

For Microsoft Lync 2010 Attendee (admin level install) (3075590):
AttendeeAdmin.msp

For all supported editions of Microsoft Lync 2013 (Skype for Business) (32-bit) and Microsoft Lync Basic 2013 (Skype for Business Basic) (32-bit):
lync2013-kb3055014-fullfile-x86-glb.exe

For all supported editions of Microsoft Lync 2013 (Skype for Business) (64-bit) and Microsoft Lync Basic 2013 (Skype for Business Basic) (64-bit):
lync2013-kb3055014-fullfile-x64-glb.exe

Installation switches

See Microsoft Knowledge Base Article 912203

Restart requirement

In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

To help reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base Article 887012.

Removal Information

Use Add or Remove Programs item in Control Panel.

File Information

For Microsoft Live Meeting 2007 Console:
See Microsoft Knowledge Base Article 3075591

For all supported editions of Microsoft Lync 2010:
See Microsoft Knowledge Base Article 3075593

For Microsoft Lync 2010 Attendee (user level install):
See Microsoft Knowledge Base Article 3075592

For Microsoft Lync 2010 Attendee (admin level install):
See Microsoft Knowledge Base Article 3075590

For Microsoft Link 2013 (Skype for Business) and Microsoft Link Basic 2013 (Skype for Business Basic):
See Microsoft Knowledge Base Article 3039779

Registry Key Verification

For Microsoft Live Meeting 2007 Console:
Not applicable

For Microsoft Lync 2010 (32-bit):
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Active Setup\Installed Components\{0EEB34F6-991D-4a1b-8EEB-772DA0EADB22}
Version = 7577.4476

For Microsoft Lync 2010 (64-bit):
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Active Setup\Installed Components\{0EEB34F6-991D-4a1b-8EEB-772DA0EADB22}
Version = 7577.4476

For Microsoft Lync 2010 Attendee (admin level install):
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Products\94E53390F8C13794999249B19E6CFE33\InstallProperties\DisplayVersion = 4.0. 7577.4476

For Microsoft Lync 2010 Attendee (user level install):
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Active Setup\Installed Components\{0EEB34F6-991D-4a1b-8EEB-772DA0EADB22}
Version = 7577.4476

For Microsoft Lync 2013 (Skype for Business) and Microsoft Lync Basic 2013 (Skype for Business Basic):
Not applicable

Security update file names

For Microsoft Silverlight 5 when installed on Mac:
Silverlight.dmg

For Microsoft Silverlight 5 Developer Runtime when installed on Mac:
silverlight_developer.dmg

Restart requirement

This update does not require a restart.

Removal information

Open the Finder, select the system drive, go to the folder Internet Plug-ins - Library, and delete the file, Silverlight.Plugin. (Note that the update cannot be removed without removing the Silverlight plug-in.)

File information

See Microsoft Knowledge Base Article 3080333

Installation verification

See the Update FAQ section in this bulletin that addresses the question, "How do I know which version and build of Microsoft Silverlight is currently installed?"

Security update file names

For Microsoft Silverlight 5 when installed on all supported 32-bit releases of Microsoft Windows:
silverlight.exe

For Microsoft Silverlight 5 Developer Runtime when installed on all supported 32-bit releases of Microsoft Windows:
silverlight_developer.exe

For Microsoft Silverlight 5 when installed on all supported 64-bit releases of Microsoft Windows:
silverlight_x64.exe

For Microsoft Silverlight 5 Developer Runtime when installed on all supported 64-bit releases of Microsoft Windows:
silverlight_developer_x64.exe

Installation switches

See the Silverlight Enterprise Deployment Guide

Restart requirement

This update does not require a restart.

Removal information

Use Add or Remove Programs item in Control Panel. (Note that the update cannot be removed without removing Silverlight.)

File information

See Microsoft Knowledge Base Article 3080333

Registry key verification

For 32-bit installations of Microsoft Silverlight 5:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Silverlight "Version" = "5.1.40714.0"

For 64-bit installations of Microsoft Silverlight 5:
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Silverlight "Version" = "5.1.40714.0"
and
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Silverlight "Version" = "5.1.40714.0"

Security update file name

For all supported 32-bit editions of Windows 10:
KB3081436-Win10-RTM-X86-TSL.msu

For Microsoft .NET Framework 3.5 on all supported 32-bit editions of Windows 10:
KB3081436-Win10-RTM-X86-TSL.msu

For all supported x64-based editions of Windows 10:
KB3081436-Win10-RTM-X64-TSL.msu

For Microsoft .NET Framework 3.5 on all supported x64-based editions of Windows 10:
KB3081436-Win10-RTM-X64-TSL.msu

Installation switches

For Microsoft Windows, see Microsoft Knowledge Base Article 934307

For Microsoft .NET Framework, see Microsoft Knowledge Base Article 2844699

Restart requirement

For Windows 10:
Yes, you must restart your system after you apply this security update.

For Microsoft .NET Framework:
This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

Removal information

For Windows 10:
To uninstall an update installed by WUSA, use the /Uninstall setup switch or click Control Panel, click System and Security, and then under Windows Update, click View installed updates and select from the list of updates.

For Microsoft .NET Framework:
Click Control Panel, click System and Security, and then under Windows Update, click View installed updates and select from the list of updates.

File information

See Microsoft Knowledge Base Article 3081436

Registry key verification

Registry keys do not exist to validate the presence of these updates.

Windows6.1-KB3072305-x86.msu

6B644311BBB9A149B56BF9627D3C81C49F15D3AD

413C9588E717FD6C3F44882CEFA4712C30A7381E74F2ADD17B0053B36F24EA06

Windows8-RT-KB3072306-x64.msu

B3AEC59329A262898CAEDD2C89B91910D42FFADC

9DA1323300FEBB3597E9752C866E87CECF98376F3EE5D66DE29D1E6011A673C3

NDP45-KB3072310-x64.exe

EFD601C2832974E3DD4C9621E73626B468FECA67

A9A9CD473B2059D43B5C40DFD34DAD437E00C5B495B075725AADB639F4F08540

Windows8.1-KB3072307-x86.msu

F97425B4CCDF7A771A1BCDCED6E4EE3AC0342468

CBC2A1D3B026C0927BE87D693C7E3A346A418984A66FB365B083408160376115

NDP30SP2-KB3072308-x86.exe

75A0782CEE3AC5EC0F81CB7427585F09B9593029

917EEF8F2560EC45BFCF2459BC2B0B732FC35899F7B7B3C0633730AA4EB13220

Windows6.1-KB3072305-x64.msu

ED204EB0A76EE10B1E2CA4E025F574AB12782F42

4B8B90FFF399F086DF4C99028E8C8F6CFCA52065D97311E9319322AF576A4DF4

NDP46-KB3072311-x64.exe

02A63966DCDB747932D74C0621BE7AAB66DA6FF1

D5EDE205951DDAAC9F04F60B65A22C1ED3425140694FDA08F39CBF66EBB141CD

NDP46-KB3072311-x86.exe

5783CEF69FDBC634BDF6868CC6BBE57A7E7F08AE

49043D7AAD7E4698A82B96028ABE80A4BEAE028A8642B121ED0CFA85B05633BF

Windows6.0-KB3072303-x86.msu

C0855B492B4FBBF39DC63F2F998B7D6331F9D0D8

205A148ACE6F66959C166B00C8C8CE4B61669AD2EE42AE3DCD81F44E676C5119

Windows6.1-KB3072305-x64.msu

E1B0DCF4FFCD8101E2D191EFF934B087EF1AF806

1495902BD039583A625CE25D712FF677854EC9391DF9712182BAB28C289360F7

Windows8-RT-KB3072306-x64.msu

E653DF3744CE0E7C3100AD5E69958F22539E8617

293E2368F540EF5D39701B33705F7987B8C3F24FDEC8FAEB67FC5B06E8D969B3

Windows8-RT-KB3072306-x86.msu

E07BD83BDA0808A25EB2DD4085B3A8A91921E97C

99F341551387E5C0153B014C2E4D67252A957BA495D14E7C8797F720A5B50465

Windows8.1-KB3072307-x64.msu

75366E877EFECA1558303314FE5C84A2D45A106E

0A551B9C79D49467E682A8D150BEF33DE440C64F06EAE7EFAB94C73EE2752795

Windows8.1-KB3072307-x86.msu

72DF02B43379A352EDB050F6566F830D91A01EBD

F4309157670453B88E40C768CB611689A1F49B17CBAD723725BC593F6220E741

NDP46-KB3072311-x86.exe

A057FED86F8C842BE32108537FDB0F3BFD42D147

5086F4B72A92C8412FB05F2C226B5CB8EC34D795D9FBE99FFCAEF8D6A57FB84E

Windows10.0-KB3078990-x64.msu

FC8454A10F651CC87D5B74C7893A17077A94E9CA

BA0576B04AE7C7B68C2982B53C40EB1CAE9FDA5FF15465A5039368DE697C2971

Windows6.1-KB3072305-x86.msu

8514A610FC87BF01CF239C8472A13F32BB63A894

E6163E531C20A5205915D50D544F6FA5AA5582E140BC73FD6CC9DCA26A73AB1B

NDP30SP2-KB3072308-x64.exe

FDC4B992B69369867942709484A6C1BE9D6E5F40

18F8D1429D02754A390C6140BB209DA3E8AA364F339454C310219276CF564BF0

NDP30SP2-KB3072308-x86.exe

DF948B25BC71432E5CADE81A55E0840A833B8BDC

F267142D9865926E473D454E5417E6F665EF92700607941D680CB855194C5E49

NDP45-KB3072310-x86.exe

9AE0D32A23B5C7A0ED86E0D87AC64EB63A6A98E2

CDEA53F6BC5F17905A449B66B0F46E814A67E06B423F85AE31A90CE7E624302C

NDP45-KB3072310-x86.exe

3CAB0DC5830DA493FFB568116DBC3D299E5C3B18

FAC094F4D8C06CE01FDEE9B325B4325701D763690E966F44033A4134FFB9CA68

Windows10.0-KB3078990-x86.msu

154B8DCE36CF6119A8FDFA33B89956122733A23C

D85C40A48EEB6F9FCA8347F95B17CF317AFEE8E53DA7D7DBC7E5B6B7AF60ACE9

Windows8-RT-KB3072306-x86.msu

C6BA0D67D207B5C35E25A8E1CB413978BF72424D

A03D9E6221DE4762D76A79E426841D98990C5CE86AB4A98A4B100AF821A66072

Windows8.1-KB3072307-x64.msu

6A59966AA83175FC6C29695C223DE8A2F2AE7FF9

409AAF149E3BC609CFBD26F84C8EAD94EAEFF764BE2C7A0CBE065BCC0FBA5EC6

NDP30SP2-KB3072308-x64.exe

162AC0620EE0E178859C2ABDC1266E3FCDAE9DE6

97F90C17D91E23F4F7638365BDEC0E0B24C5B5398B3D083479BF859A91B73C08

NDP40-KB3072309-x86.exe

7BDA28D4C145E095924BD8C54E3542B46F36CCDE

460EB2F8AA74E8F5E2936F5F361CCD691FAE50462F812E4318F0658644F316E0

Windows6.0-KB3072303-x64.msu

6042883A9AB2D94DF29633A865CA23F72F4CC4FA

8979D6FDD3F4354101C465E4EB456F1507BD5426B9E3CAC6E05562BE32BA3AEF

NDP40-KB3072309-x64.exe

9466B714A6215E9A4A0428D2FB188EAACCC6C36A

E442F0FDD7259A4CA8A2839D1F58FCADC4D1C257F58D6CD22B8EA0B64ACBFE60

NDP40-KB3072309-x86.exe

E0B42DE69B59E0437B4AD5C8BF9F6D197510A6EF

B1002BAB053C42997E5F9631DB9567C3BDB4811A7C48E18C7AAACAB64CF7F46C

NDP46-KB3072311-x64.exe

95936F09E4AB0CEBA8B78E12EC311C2F475B9955

2ACAFD52A8421665AF635C7862FF41FA6BF1B922365A2B5BF373CAD3142E86F7

NDP40-KB3072309-x64.exe

346F3DAAD482494DB68BBD8935B0764DC8235174

953D044F2D156C15C3A2DBE0F115994F6C6CF34F0F9D85900A3470EC32E9402A

NDP45-KB3072310-x64.exe

4665CD57B9820F440BE31FE187969C2B000F3CFE

B5E3FAD72838D5C270F455D5646FB145C55180A06791CE07AE0892394E52EEA5

lync2013-kb3055014-fullfile-x86-glb.exe

F0735CE917F9E51E76367D6553BDA712FE1CEE81

1BE5FF8DB1ACCC33D5C38CCEA478A22972ECADF0185134AB4B6A0DBB4D670710

lync2013-kb3055014-fullfile-x64-glb.exe

4C40C26CC72A98691B93D9F532417D2CF40D8CEC

E2BF49BCF17C8B5220C4BC011C362CC19122B8C7AC6A827B09DD144A648D486D

ogl2007-kb3054890-fullfile-x86-glb.exe

5AC862F5E20A9928B2D1983BFB1B5A85BA8F3D41

BA824DCF6A1AEE213B1921DFEEC55C4D71EC71820FF0BB415E96986FC1E7023D

ogl2010-kb3054846-fullfile-x86-glb.exe

9E50ED7900D462495BCDD6319F99BEBCC3AE16A3

CF602DDD145FC96D5A4FE5A5087520A07D498B0F96B031BCD08C0BA1BFA2A65A

ogl2010-kb3054846-fullfile-x64-glb.exe

95C6E057DF876F418420DA6BF0B870523662A509

771B42846D74D29B6373EB48D6C0B47A1D5880B66D09FC8DF46CBB71FE51716F