Applies ToMicrosoft Windows XP Professional x64 Edition

Not sure if this is the right fix? We've added this issue to our memory dump diagnostic which can confirm.

Error message description

A Windows Server 2003-based computer that has the TCP Chimney feature enabled restarted unexpectedly. After it restarted, you received the following Stop error message:

Stop 0x000000D1 ( parameter1 , parameter2 , parameter3 , parameter4 )DRIVER_IRQL_NOT_LESS_OR_EQUAL

Notes

  • The parameters in this Stop error message vary, depending on the configuration of the computer.

  • Not all "0x000000D1" Stop error messages are caused by this problem.

Cause

This problem occurs because of a timing issue in the TCP/IP module. This timing issue occurs because of a race condition between the IPInitiateOffloadComplete function and the IPDelayedInvalidateWorker function.

Resolution

A hotfix is available to resolve this problem.

Hotfix information

A supported hotfix is available from Microsoft. However, this hotfix is intended to correct only the problem that is described in this article. Apply this hotfix only to systems that are experiencing this specific problem. This hotfix might receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next software update that contains this hotfix.If the hotfix is available for download, there is a "Hotfix download available" section at the top of this Knowledge Base article. If this section does not appear, contact Microsoft Customer Service and Support to obtain the hotfix. Note If additional issues occur or if any troubleshooting is required, you might have to create a separate service request. The usual support costs will apply to additional support questions and issues that do not qualify for this specific hotfix. For a complete list of Microsoft Customer Service and Support telephone numbers or to create a separate service request, visit the following Microsoft Web site:

http://support.microsoft.com/contactus/?ws=supportNote The "Hotfix download available" form displays the languages for which the hotfix is available. If you do not see your language, it is because a hotfix is not available for that language.

Prerequisites

To apply this hotfix, your computer must have one of the following service packs installed:

  • Windows Server 2003 Service Pack 1

  • Windows Server 2003 Service Pack 2

Restart requirement

You must restart the computer after you apply this hotfix.

Hotfix replacement information

This hotfix does not replace any other previously released hotfixes.

Registry information

To use this hotfix, you do not have to make any changes to the registry.

File information

The English version of this hotfix has the file attributes (or later file attributes) that are listed in the following table. The dates and times for these files are listed in Coordinated Universal Time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time item in Control Panel.

Windows Server 2003 with SP 1, x86-based versions

File name

File version

File size

Date

Time

Platform

Tcpip.sys

5.2.3790.3097

393,728

03-Mar-2008

11:07

x86

Windows Server 2003 with SP 2, x86-based versions

File name

File version

File size

Date

Time

Platform

Tcpip.sys

5.2.3790.4245

390,144

03-Mar-2008

10:47

x86

Windows Server 2003 with SP1, Itanium-based versions

File name

File version

File size

Date

Time

Platform

Tcpip.sys

5.2.3790.3097

1,305,600

03-Mar-2008

11:49

IA-64

Windows Server 2003 with SP2, Itanium-based versions

File name

File version

File size

Date

Time

Platform

Tcpip.sys

5.2.3790.4245

1,307,136

03-Mar-2008

12:03

IA-64

Windows Server 2003 and Windows XP, x64-based versions

File name

File version

File size

Date

Time

Platform

Tcpip.sys

5.2.3790.3097

826,880

03-Mar-2008

11:48

x64

Windows Server 2003 with SP2 and Windows XP with SP2, x64-based versions

File name

File version

File size

Date

Time

Platform

Tcpip.sys

5.2.3790.4245

781,824

03-Mar-2008

12:03

x64

Workaround

To work around this problem, disable the TCP Chimney feature.

Use the Netsh.exe tool to disable the TCP Chimney feature

To use the Netsh.exe tool to disable the TCP Chimney feature, follow these steps:

  1. Click Start, click Run, type cmd, and then click OK.

  2. At the command prompt, type Netsh int ip set chimney DISABLED, and then press ENTER.

Use the registry to disable the TCP Chimney feature

Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:

322756 How to back up and restore the registry in WindowsTo have us fix this problem for you, go to the "Fix it for me" section. If you’d rather fix this problem yourself, go to the "Let me fix it myself” section.

Fix it for me

To fix this problem automatically, click the Fix this problemlink. Then click Runin the File Downloaddialog box, and follow the steps in this wizard.

Note this wizard may be in English only; however, the automatic fix also works for other language versions of Windows.NoteIf you are not on the computer that has the problem, you can save the automatic fix to a flash drive or a CD so that you can run it on the computer that has the problem. Now go to the "Did this fix the problem?" section.

Let me fix it myself

To disable the TCP Chimney feature by changing the registry, follow these steps:

  1. Click Start, click Run, type Regedit, and then click OK.

  2. Locate the following registry subkey:

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters

  3. Double-click the EnableTCPChimney registry entry.

  4. In the Edit DWORD Value dialog box, type 0 in the Value data box, and then click OK.

  5. Double-click the EnableRSS registry entry.

  6. In the Edit DWORD Value dialog box, type 0 in the Value data box, and then click OK.

  7. Double-click the EnableTCPA registry entry.

  8. In the Edit DWORD Value dialog box, type 0 in the Value data box, and then click OK.

  9. Restart the computer.

Did this fix the problem?

Check whether the problem is fixed. If the problem is fixed, you are finished with this article. If the problem is not fixed, you can contact support.

Status

Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the "Applies to" section.

More information

For more information, click the following article number to view the article in the Microsoft Knowledge Base:

824684 Description of the standard terminology that is used to describe Microsoft software updates

Technical support for x64-based versions of Microsoft Windows

If your hardware came with a Microsoft Windows x64 edition already installed, your hardware manufacturer provides technical support and assistance for the Windows x64 edition. In this case, your hardware manufacturer provides support because a Windows x64 edition was included with your hardware. Your hardware manufacturer might have customized the Windows x64 edition installation by using unique components. Unique components might include specific device drivers or might include optional settings to maximize the performance of the hardware. Microsoft will provide reasonable-effort assistance if you must have technical help with a Windows x64 edition. However, you might have to contact your manufacturer directly. Your manufacturer is best qualified to support the software that your manufacturer installed on the hardware. If you purchased a Windows x64 edition such as a Windows Server 2003 x64 edition separately, contact Microsoft for technical support.For product information about Windows XP Professional x64 Edition, visit the following Microsoft Web site:

http://www.microsoft.com/windowsxp/64bit/default.mspx For product information about x64-based versions of Windows Server 2003, visit the following Microsoft Web site:

http://www.microsoft.com/windowsserver2003/64bit/x64/default.mspx

Need more help?

Want more options?

Explore subscription benefits, browse training courses, learn how to secure your device, and more.

Communities help you ask and answer questions, give feedback, and hear from experts with rich knowledge.