An incorrect warehouse movement suggestion is created when there is a unit of measure conversion in the movement in Microsoft Dynamics NAV 5.0

This article applies to Microsoft Dynamics NAV for all countries and all language locales.

Consider the following scenario in Microsoft Dynamics NAV 5.0:

  • You have a bin in which there is an item that uses different unit of measure (UoM).

  • There is a conversion between the two UoM.

  • You move the item from the bin to another bin.

  • A UoM conversion is necessary in the movement.

  • You run the warehouse movement function in the Movement Worksheets┬ádialog box for the item.

In this scenario, the UoM conversion lines are created incorrectly in the warehouse movement suggestion.

Symptoms

Hotfix information

A supported hotfix is now available from Microsoft. However, it is only intended to correct the problem that is described in this article. Apply it only to systems that are experiencing this specific problem. This hotfix may receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next Microsoft Dynamics NAV 2009 service pack or the next Microsoft Dynamics NAV version that contains this hotfix.

Note In special cases, charges that are ordinarily incurred for support calls may be canceled if a Technical Support Professional for Microsoft Dynamics and related products determines that a specific update will resolve your problem. The usual support costs will apply to additional support questions and issues that do not qualify for the specific update in question.

Resolution



Installation information

Microsoft provides programming examples for illustration only, without warranty either expressed or implied. This includes, but is not limited to, the implied warranties of merchantability or fitness for a particular purpose. This article assumes that you are familiar with the programming language that is being demonstrated and with the tools that are used to create and to debug procedures. Microsoft support engineers can help explain the functionality of a particular procedure, but they will not modify these examples to provide added functionality or construct procedures to meet your specific requirements.

Note Before you install this hotfix, verify that all Microsoft Navision client users are logged off the system. This includes Microsoft Navision Application Services (NAS) client users. You should be the only client user who is logged on when you implement this hotfix.

To implement this hotfix, you must have a developer license.

We recommend that the user account in the Windows Logins window or in the Database Logins window be assigned the "SUPER" role ID. If the user account cannot be assigned the "SUPER" role ID, you must verify that the user account has the following permissions:

  • The Modify permission for the object that you will be changing.

  • The Execute permission for the System Object ID 5210 object and for the System Object ID 9015 object.



Note You do not have to have rights to the data stores unless you have to perform data repair.

Code changes

Note Always test code fixes in a controlled environment before you apply the fixes to your production computers.
To resolve this problem, follow these steps:

  1. Change the code in the CreateTempLine2 function in the Create Pick codeunit (7312) as follow:
    Existing code 1

         ...

    IF QtytoPick > 0 THEN BEGIN

    QtytoPick :=

    QtytoPick -

    ROUND(

    CalcPickQtyAssigned(

    //Delete the following line.
    LocationCode,ItemNo,VariantCode,'',TempWhseItemTrkgLine)


    ...

    Replacement code 1

         ...

    IF QtytoPick > 0 THEN BEGIN

    QtytoPick :=

    QtytoPick -

    ROUND(

    CalcPickQtyAssigned(

    //Add the following line.
    LocationCode,ItemNo,VariantCode,UnitofMeasureCode,'',TempWhseItemTrkgLine)

    ...

    Existing code 2

         ...

    IF QtytoPick > 0 THEN BEGIN

    QtytoPick :=

    QtytoPick -

    ROUND(

    CalcPickQtyAssigned(

    //Delete the following line.
    LocationCode,ItemNo,VariantCode,'',TempWhseItemTrkgLine)


    ...

    Replacement code 2

         ...

    IF QtytoPick > 0 THEN BEGIN

    QtytoPick :=

    QtytoPick -

    ROUND(

    CalcPickQtyAssigned(

    //Add the following line.
    LocationCode,ItemNo,VariantCode,UnitofMeasureCode,'',TempWhseItemTrkgLine)

    ...

    Existing code 3

         ...

    QtyPerUnitofMeasure,0.00001);

    QtytoPickBase := QtytoPickBase -

    CalcPickQtyAssigned(

    //Delete the following line.
    LocationCode,ItemNo,VariantCode,'',TempWhseItemTrkgLine);


    ...

    Replacement code 3

         ...

    QtyPerUnitofMeasure,0.00001);

    QtytoPickBase := QtytoPickBase -

    CalcPickQtyAssigned(

    //Add the following line.
    LocationCode,ItemNo,VariantCode,UnitofMeasureCode,'',TempWhseItemTrkgLine);

    ...
  2. Change the code in the InsertTmpActLnFromMovWkshLine function in the Create Pick codeunit (7312) as follow:
    Existing code

         ...

    LocationCode,FromBinCode,ItemNo,VariantCode,WhseWkshLine."From Unit of Measure Code");

    FromBinContent.CALCFIELDS(Quantity,"Pick Qty.","Neg. Adjmt. Qty.");

    PickQtyAssigned :=

    ROUND(

    CalcPickQtyAssigned(

    //Delete the following line.
    LocationCode,ItemNo,VariantCode,WhseWkshLine."From Bin Code",TempWhseItemTrkgLine)

    ...

    Replacement code

         ...

    LocationCode,FromBinCode,ItemNo,VariantCode,WhseWkshLine."From Unit of Measure Code");

    FromBinContent.CALCFIELDS(Quantity,"Pick Qty.","Neg. Adjmt. Qty.");

    PickQtyAssigned :=

    ROUND(

    CalcPickQtyAssigned(

    //Add the following lines.
    LocationCode,ItemNo,VariantCode,

    WhseWkshLine."From Unit of Measure Code",

    WhseWkshLine."From Bin Code",TempWhseItemTrkgLine)
    //End of the lines.
    ...
  3. Change the code in the FindBWPickBin function in the Create Pick codeunit (7312) as follow:
    Existing code

         ...

    IF QtyToPickBase > 0 THEN BEGIN

    QtyToPickBase :=

    QtyToPickBase -

    ROUND(

    CalcPickQtyAssigned(

    //Delete the following line.
    LocationCode,ItemNo,VariantCode,"Bin Code",TempWhseItemTrkgLine)

    ...

    Replacement code

         ...

    IF QtyToPickBase > 0 THEN BEGIN

    QtyToPickBase :=

    QtyToPickBase -

    ROUND(

    CalcPickQtyAssigned(

    //Add the following lines.
    LocationCode,ItemNo,VariantCode,"Bin Code","Unit of Measure Code",

    TempWhseItemTrkgLine)
    //End of the lines.
    ...
  4. Add a new local variable in the CalcPickQtyAssigned function in the Create Pick codeunit (7312), and specify the variable as follows:

    • Name: UOMCode@1004

    • DataType: Code

    • Length: 10

  5. Change the code in the CalcPickQtyAssigned function in the Create Pick codeunit (7312) to the following:

         ...

    END ELSE BEGIN

    SETRANGE("Action Type","Action Type"::" ");

    SETRANGE("Bin Code",'');

    END;

    SETRANGE("Variant Code",VariantCode);

    //Add the following lines.
    IF UOMCode <> '' THEN

    SETRANGE("Unit of Measure Code",UOMCode);
    //End of the lines.
    ...
  6. Change the code in the CalcTotalAvailQtyToPick function in the Create Pick codeunit (7312) as follow:
    Existing code

         ...

    QtyAssignedPick :=

    //Delete the following line.
    CalcPickQtyAssigned(LocationCode,ItemNo,VariantCode,'',TempWhseItemTrkgLine2);

    Replacement code

         ...

    QtyAssignedPick :=

    //Add the following line.
    CalcPickQtyAssigned(LocationCode,ItemNo,VariantCode,'','',TempWhseItemTrkgLine2);

Prerequisites

You must have Microsoft Dynamics NAV 5.0 installed to apply this hotfix.

Removal information

You cannot remove this hotfix.

Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the "Applies to" section.

Status

Note This is a "FAST PUBLISH" article created directly from within the Microsoft support organization. The information contained herein is provided as-is in response to emerging issues. As a result of the speed in making it available, the materials may include typographical errors and may be revised at any time without notice. See Terms of Use for other considerations.

Need more help?

Expand your skills
Explore Training
Get new features first
Join Microsoft Insiders

Was this information helpful?

Thank you for your feedback!

Thank you for your feedback! It sounds like it might be helpful to connect you to one of our Office support agents.

×