FIX: Logo certification issues when you run test cases in a Host Integration Server 2010 environment

Introduction

This article describes certain logo certification issues that occur when you run test cases in a Microsoft Host Integration Server 2010 environment.

To resolve these logo certification issues, apply this hotfix. For more information about the logo certification issues that are fixed by this hotfix, see the "More Information" section.

Resolution

Hotfix information

A supported hotfix is available from Microsoft. However, this hotfix is intended to correct only the problem that described in this article. Apply this hotfix only to systems that are experiencing the problem described in this article. This hotfix might receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next software update that contains this hotfix.

If the hotfix is available for download, there is a "Hotfix download available" section at the top of this Knowledge Base article. If this section does not appear, contact Microsoft Customer Service and Support to obtain the hotfix.

Note If additional issues occur or if any troubleshooting is required, you might have to create a separate service request. The usual support costs will apply to additional support questions and issues that do not qualify for this specific hotfix. For a complete list of Microsoft Customer Service and Support telephone numbers or to create a separate service request, visit the following Microsoft website:

http://support.microsoft.com/contactus/?ws=supportNote The "Hotfix download available" form displays the languages for which the hotfix is available. If you do not see your language, it is because a hotfix is not available for that language.

Prerequisites

You must have Microsoft Host Integration Server 2010 installed to apply this hotfix.

Restart information

You do not have to restart the computer after you apply this hotfix.

Replacement information

This hotfix does not replace a previously released hotfix.

File information

The English version of this hotfix has the file attributes (or later file attributes) that are listed in the following table. The dates and times for these files are listed in Coordinated Universal Time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time item in Control Panel.

For Microsoft Host Integration Server 2010, 32-bit Edition

File name

File version

File size

Date

Time

Platform

802cfg.dll

8.5.4258.2

153,424

30-Dec-2010

21:44

x86

Dbgtrace.dll

8.5.4258.2

51,024

30-Dec-2010

21:44

x86

Delnamespace.exe

8.5.4258.2

15,704

30-Dec-2010

21:44

x86

Democfg.dll

8.5.4258.2

132,944

30-Dec-2010

21:44

x86

Linkcfg.exe

8.5.4258.2

23,888

30-Dec-2010

21:44

x86

Remcfg.dll

8.5.4258.2

182,096

30-Dec-2010

21:44

x86

Resyncsvc.exe

8.5.4258.2

145,240

30-Dec-2010

21:44

x86

Snacfg.dll

8.5.4258.2

296,784

30-Dec-2010

21:44

x86

Snadmod.dll

8.5.4258.2

837,456

30-Dec-2010

21:44

x86

Snaip.dll

8.5.4258.2

124,752

30-Dec-2010

21:44

x86

Snaip6.dll

8.5.4258.2

124,752

30-Dec-2010

21:44

x86

Snaipcfg.dll

8.5.4258.2

149,328

30-Dec-2010

21:44

x86

Snaipdlc.dll

8.5.4258.2

1,013,584

30-Dec-2010

21:44

x86

Snalink.dll

8.5.4258.2

63,312

30-Dec-2010

21:44

x86

Snaprint.exe

8.5.4258.2

91,984

30-Dec-2010

21:44

x86

Snasii.dll

8.5.4258.2

36,176

30-Dec-2010

21:44

x86

Tn3servr.exe

8.5.4258.2

259,920

30-Dec-2010

21:44

x86

Wmisnalinkservicems.dll

8.5.4258.2

112,488

30-Dec-2010

21:44

x86

For Microsoft Host Integration Server 2010, 64-bit Edition

File name

File version

File size

Date

Time

Platform

Service branch

802cfg.dll

8.5.4258.2

166,224

30-Dec-2010

21:46

x64

Not Applicable

Dbgtrace.dll

8.5.4258.2

63,824

30-Dec-2010

21:46

x64

Not Applicable

Delnamespace.exe

8.5.4258.2

17,240

30-Dec-2010

21:46

x64

Not Applicable

Democfg.dll

8.5.4258.2

132,432

30-Dec-2010

21:46

x64

Not Applicable

Linkcfg.exe

8.5.4258.2

28,496

30-Dec-2010

21:46

x64

Not Applicable

Remcfg.dll

8.5.4258.2

183,632

30-Dec-2010

21:46

x64

Not Applicable

Resyncsvc.exe

8.5.4258.2

163,160

30-Dec-2010

21:46

x64

Not Applicable

Snacfg.dll

8.5.4258.2

389,456

30-Dec-2010

21:46

x64

Not Applicable

Snadmod.dll

8.5.4258.2

1,044,816

30-Dec-2010

21:46

x64

Not Applicable

Snaip.dll

8.5.4258.2

132,944

30-Dec-2010

21:46

x64

Not Applicable

Snaip6.dll

8.5.4258.2

138,064

30-Dec-2010

21:46

x64

Not Applicable

Snaipcfg.dll

8.5.4258.2

195,920

30-Dec-2010

21:46

x64

Not Applicable

Snaipdlc.dll

8.5.4258.2

1,398,608

30-Dec-2010

21:46

x64

Not Applicable

Snalink.dll

8.5.4258.2

69,968

30-Dec-2010

21:46

x64

Not Applicable

Snaprint.exe

8.5.4258.2

92,496

30-Dec-2010

21:46

x64

Not Applicable

Snasii.dll

8.5.4258.2

48,464

30-Dec-2010

21:46

x64

Not Applicable

Tn3servr.exe

8.5.4258.2

319,824

30-Dec-2010

21:46

x64

Not Applicable

Wmisnalinkservicems.dll

8.5.4258.2

151,400

30-Dec-2010

21:46

x64

Not Applicable

802cfg.dll

8.5.4258.2

153,424

30-Dec-2010

21:46

x86

SYSWOW

Dbgtrace.dll

8.5.4258.2

51,024

30-Dec-2010

21:46

x86

SYSWOW

Democfg.dll

8.5.4258.2

132,944

30-Dec-2010

21:46

x86

SYSWOW

Remcfg.dll

8.5.4258.2

182,096

30-Dec-2010

21:46

x86

SYSWOW

Snaipcfg.dll

8.5.4258.2

149,328

30-Dec-2010

21:46

x86

SYSWOW

Note Because of file dependencies, the most recent fix that contains these files may also contain additional files.

Status

Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the "Applies to" section.

More Information

Known Logo Certification issues

Test Case 1.1.1: All Primary Functionality tests and Certification test cases pass

The SnaBase service (snabase.exe) does not function correctly in a mixed IPv4/IPv6 environment. This problem occurs if IPv6 support is enabled on a Host Integration Server system that is running on a network segment that is not enabled for IPv6. The SnaBase service may stop unexpectedly when this problem occurs. An event message that resembles the following may be logged in the Application event log when the SnaBase service stops:

Event ID: 1000
Source: Application Error
Description:
Faulting application snabase.exe, version 8.5.4143.0, time stamp 0x4be78cea, faulting module SNAIP6.DLL, version 8.5.4143.0, time stamp 0x4be78ce9, exception code 0xc0000005, fault offset 0x000000000000df3e, process id 0xe64, application start time 0x01cb06fc21e60f74


By default, IPv6 support is not enabled in Host Integration Server 2010. Therefore, this problem does not occur under typical usage because. To enable support for IPv6 for the Network Integration (SNA Gateway) features in Host Integration Server 2010, follow these steps:

  1. Run the Host Integration Server 2010 Configuration Tool.

  2. Click Network Integration.

  3. Click the Advanced button.

  4. Select the TCP/IP v6 option under Client Protocol Support.

  5. Click Close.

  6. Click Apply Configuration.

  7. Click Next, and then click Finish to complete the configuration wizard and to apply the changes.

  8. Close the Configuration Tool.


Test Case 4.3.1: Does the application appropriately use Heaps, Locks, and Handles resources?

  • The 3270 Client (win3270.exe) fails the handle usage test when it runs under Application Verifier. This problem occurs when the 3270 Client is being reconfigured. The problem does not cause issues during typical usage because the 3270 Client handles the errors that occur when the 3270 Client is being reconfigured.

  • The Snalink.exe service that is used to load Host Integration Server link services fails the handle usage test when it runs under Application Verifier. This problem occurs when the Snalink service is being stopped. The problem does not cause issues during typical usage because the Snalink service handles the exception that occurs when the service is stopped.

  • The 5250 Client (win5250.exe) fails the handle usage test when it runs under Application Verifier. This problem occurs when the 5250 Client is being reconfigured. The problem does not cause issues during typical usage because the 5250 Client handles the errors that occur when the 5250 Client is being reconfigured.

  • The HIS LU62 Resync Service (resyncsvc.exe) fails the Heaps test when it runs under Application Verifier. This problem occurs when the Host Integration Server configuration has no Local APPC LUs configured for SyncPoint support. The following error is logged in the Application event log when the HIS LU62 Resync Service is started, and no Local APPC LUs are configured to support SyncPoint:

    Event ID: 1000
    Source: Application Error
    Description:
    Faulting application name: resyncsvc.exe, version: 8.5.4224.0, time stamp: 0x4c6379e4
    Faulting module name: resyncsvc.exe, version: 8.5.4224.0, time stamp: 0x4c6379e4
    Exception code: 0xc0000005
    Fault offset: 0x000000000000d45e
    Faulting process id: <process ID>
    Faulting application start time: <time>
    Faulting application path: C:\Program Files\Microsoft Host Integration Server 2010\system\resyncsvc.exe
    Faulting module path: C:\Program Files\Microsoft Host Integration Server 2010\system\resyncsvc.exe

  • The TN3270 Service (tn3servr.exe) fails the Heaps test when it runs under Application Verifier. This problem occurs when the TN3270 Service is started before the SNA Service is configured by using SNA Manager or snacfg.exe. During typical usage, the following events are logged in the Application event log when the TN3270 Service is started before the SNA Service is configured:

    Event ID: 1021
    Source: TN3270 Server
    Description:
    No port security records available – no ports configured

    Event ID: 102
    Source: TN3270 Server
    Description:
    TN3270E Service initialization completed by initialization error.


Test Case 4.3.2: Does the application correctly handle Exceptions, Memory, and TLS resource usage?

The Host Print service (snaprint.exe) fails the Thread Local Storage (TLS) test when it runs under Application Verifier. This problem occurs when the Host Print service is being stopped. The problem does not cause issues during typical usage because the Host Print service handles the exception that occurs when the service is stopped.

Test Case 4.3.3: Does the application correctly handle Dirty Stacks or use Dangerous APIs?

The SNA Server service (snaservr.exe) fails the Dirty Stacks and Dangerous APIs tests when it runs under Application Verifier. This problem occurs when the SNA Server service is being stopped. The problem does not cause issues during typical usage as the SNA Server service handles the exception that occurs when the service is stopped.


References

For more information about the Windows Server 2008 R2 logo certification, visit the following Microsoft website:

Preparing to Earn the “Certified for Windows Server 2008 R2” Logo

Need more help?

Expand your skills
Explore Training
Get new features first
Join Microsoft Insiders

Was this information helpful?

Thank you for your feedback!

Thank you for your feedback! It sounds like it might be helpful to connect you to one of our Office support agents.

×