En este artículo se aplica a Microsoft para los siguientes países y configuraciones regionales de idioma.
-
Inglés (Canadá) (en-ca)
-
Inglés (Estados Unidos) (en-us)
-
Español (México) (es-mx)
-
Francés (Canadá) (fr-ca)
Síntomas
Supongamos que ha establecido a CAD como el valor de una divisa adicional en Configuración contabilidad cuadro de diálogo en la versión norteamericana de Microsoft Dynamics NAV 2009. Cuando se registra una factura de compra que contiene impuestos, recibirá el siguiente mensaje de error:
No se puede completar la transacción porque causaría inconsistencias en la tabla Mov. Revise dónde y cómo se utiliza la función CONSISTENT en la transacción para averiguar el motivo del error.
Este problema se produce en los siguientes productos:
-
La versión norteamericana de Microsoft Dynamics NAV 2009 R2
-
La versión norteamericana de Service Pack 1 de Microsoft Dynamics NAV 2009
Solución
Información de la revisión
Ahora hay una revisión compatible de Microsoft. Sin embargo, sólo se diseñó para corregir el problema que se describe en este artículo. Aplíquela sólo a sistemas que experimenten este problema específico. Esta revisión puede ser sometida a comprobaciones adicionales. Por lo tanto, si no se ve muy afectado por este problema, recomendamos que espere al próximo service pack de Microsoft Dynamics NAV 2009 o la próxima versión de Microsoft Dynamics NAV que contenga esta revisión.
Nota: En casos especiales, los costos derivados normalmente de las llamadas pueden cancelarse si un profesional de soporte técnico de Microsoft Dynamics y productos relacionados de soporte determina que una actualización específica resolverá el problema. Los costos habituales de soporte se aplicarán a las preguntas de soporte técnico adicionales y problemas que no guarden relación con la actualización en cuestión.
Información sobre la instalación
Microsoft proporciona ejemplos de programación únicamente con fines ilustrativos, sin ninguna garantía expresa o implícita. Esto incluye, pero no se limita, a las garantías implícitas de comerciabilidad o idoneidad para un propósito particular. Este artículo asume que está familiarizado con el lenguaje de programación que se muestra y con las herramientas que se utilizan para crear y depurar procedimientos. Los ingenieros de soporte técnico de Microsoft pueden explicarle la funcionalidad de un determinado procedimiento, pero no modificarán estos ejemplos para ofrecer mayor funcionalidad ni crearán procedimientos que cumplan sus requisitos específicos.
Nota: Antes de instalar este hotfix, compruebe que todos los usuarios del cliente Microsoft Navision han salido del sistema. Esto incluye a los usuarios del cliente Microsoft Navision Application Services (NAS). Debe ser el único usuario del cliente conectado cuando implemente este hotfix.
Para implementar esta revisión, debe tener una licencia de desarrollador.
Recomendamos que la cuenta de usuario en la ventana Conexiones Windows o en la ventana Conexiones base de datos se asigne el identificador de rol "SUPER". Si la cuenta de usuario no se puede asignar el identificador de rol "SUPER", debe comprobar que la cuenta de usuario tiene los permisos siguientes:
-
El permiso de modificación para el objeto que se va a cambiar.
-
El permiso de ejecución para el objeto System Object ID 5210 y System Object ID 9015 del objeto.
Nota: No es necesario tener derechos para los almacenes de datos a menos que deba realizar reparaciones de datos.
Cambios de código
Nota: Siempre pruebe correcciones de código en un entorno controlado antes de aplicar las revisiones a los equipos de producción.
Para resolver este problema, siga estos pasos:
-
Cambie el código en los campos de la tabla Sales Tax Amount Line (10011) como sigue:
Código existente...ESM=Es Informe jurisdicci¢n;
FRC=Est une juridiction fiscale;
ENC=Is Report-to Jurisdiction];
Editable=No }
}
KEYS
{
{ ;Tax Area Code for Key,Tax Jurisdiction Code,Tax %,Tax Group Code,Expense/Capitalize,Tax Type,Use Tax;
...Código de sustitución
...
ESM=Es Informe jurisdicci¢n;
FRC=Est une juridiction fiscale;
ENC=Is Report-to Jurisdiction];
Editable=No }
// Add the following line.
{ 10044; ;Tax Base Amount FCY ;Decimal }
// End of the added line.
}
KEYS
{
{ ;Tax Area Code for Key,Tax Jurisdiction Code,Tax %,Tax Group Code,Expense/Capitalize,Tax Type,Use Tax;
... -
Cambie el código en la función PostSalesTaxToGL de la Codeunit Sales-Post (80) como sigue:
Código existente...END;
GenJnlLine."Tax Jurisdiction Code" := TempSalesTaxAmtLine."Tax Jurisdiction Code";
IF TempSalesTaxAmtLine."Tax Amount" <> 0 THEN BEGIN
RemSalesTaxSrcAmt := RemSalesTaxSrcAmt +
// Delete the following lines.
CurrExchRate.ExchangeAmtLCYToFCY(
UseDate,SalesHeader."Currency Code",TempSalesTaxAmtLine."Tax Amount",SalesHeader."Currency Factor");
// End of the deleted lines.
GenJnlLine."Source Curr. VAT Amount" :=
SalesTaxCalculate.ArithmeticRound(RemSalesTaxSrcAmt,Currency."Amount Rounding Precision");
RemSalesTaxSrcAmt := RemSalesTaxSrcAmt - GenJnlLine."Source Curr. VAT Amount";
RemSalesTaxAmt := RemSalesTaxAmt + TempSalesTaxAmtLine."Tax Amount";
...Código de sustitución
...END;
GenJnlLine."Tax Jurisdiction Code" := TempSalesTaxAmtLine."Tax Jurisdiction Code";
IF TempSalesTaxAmtLine."Tax Amount" <> 0 THEN BEGIN
RemSalesTaxSrcAmt := RemSalesTaxSrcAmt +
// Add the following lines.
TempSalesTaxAmtLine."Tax Base Amount FCY" * TempSalesTaxAmtLine."Tax %" / 100;
// End of the added lines.
GenJnlLine."Source Curr. VAT Amount" :=
SalesTaxCalculate.ArithmeticRound(RemSalesTaxSrcAmt,Currency."Amount Rounding Precision");
RemSalesTaxSrcAmt := RemSalesTaxSrcAmt - GenJnlLine."Source Curr. VAT Amount";
RemSalesTaxAmt := RemSalesTaxAmt + TempSalesTaxAmtLine."Tax Amount";
... -
Cambie el código de la función PostSalesTaxToGL de Purch-Post Codeunit (90) como se indica a continuación:
Código existente...END;
GenJnlLine."Tax Jurisdiction Code" := TempSalesTaxAmtLine."Tax Jurisdiction Code";
IF TempSalesTaxAmtLine."Tax Amount" <> 0 THEN BEGIN
RemSalesTaxSrcAmt := RemSalesTaxSrcAmt +
// Delete the following lines.
CurrExchRate.ExchangeAmtLCYToFCY(
Usedate,PurchHeader."Currency Code",TempSalesTaxAmtLine."Tax Amount",PurchHeader."Currency Factor");
// End of the deleted lines.
GenJnlLine."Source Curr. VAT Amount" :=
SalesTaxCalculate.ArithmeticRound(RemSalesTaxSrcAmt,Currency."Amount Rounding Precision");
RemSalesTaxSrcAmt := RemSalesTaxSrcAmt - GenJnlLine."Source Curr. VAT Amount";
RemSalesTaxAmt := RemSalesTaxAmt + TempSalesTaxAmtLine."Tax Amount";
...Código de sustitución
...END;
GenJnlLine."Tax Jurisdiction Code" := TempSalesTaxAmtLine."Tax Jurisdiction Code";
IF TempSalesTaxAmtLine."Tax Amount" <> 0 THEN BEGIN
RemSalesTaxSrcAmt := RemSalesTaxSrcAmt +
// Add the following line.
TempSalesTaxAmtLine."Tax Base Amount FCY" * TempSalesTaxAmtLine."Tax %" / 100;
// End of the added line.
GenJnlLine."Source Curr. VAT Amount" :=
SalesTaxCalculate.ArithmeticRound(RemSalesTaxSrcAmt,Currency."Amount Rounding Precision");
RemSalesTaxSrcAmt := RemSalesTaxSrcAmt - GenJnlLine."Source Curr. VAT Amount";
RemSalesTaxAmt := RemSalesTaxAmt + TempSalesTaxAmtLine."Tax Amount";
... -
Cambie el código de la función PostProvincialSalesTaxToGL de Purch-Post Codeunit (90) como se indica a continuación:
Código existente...TaxJurisdiction.TESTFIELD("Tax Account (Purchases)");
GenJnlLine."Account No." := TaxJurisdiction."Tax Account (Purchases)";
END;
GenJnlLine.Amount := GenJnlLine."VAT Amount";
// Delete the following lines.
GenJnlLine."Source Curr. VAT Base Amount" := 0;
GenJnlLine."VAT Base Amount (LCY)" := 0;
GenJnlLine."VAT Base Amount" := 0;
GenJnlLine."Source Curr. VAT Amount" := 0;
// End of the deleted lines.
GenJnlLine."VAT Amount (LCY)" := 0;
GenJnlLine."VAT Amount" := 0;
GenJnlLine.Quantity := 0;
GenJnlLine."VAT Difference" := 0;
...Código de sustitución
...TaxJurisdiction.TESTFIELD("Tax Account (Purchases)");
GenJnlLine."Account No." := TaxJurisdiction."Tax Account (Purchases)";
END;
GenJnlLine.Amount := GenJnlLine."VAT Amount";
// Add the following lines.
GenJnlLine."Source Currency Amount" := GenJnlLine."Source Curr. VAT Amount";
GenJnlLine."Source Curr. VAT Base Amount" := 0;
GenJnlLine."VAT Base Amount (LCY)" := 0;
GenJnlLine."VAT Base Amount" := 0;
// End of the added lines.
GenJnlLine."VAT Amount (LCY)" := 0;
GenJnlLine."VAT Amount" := 0;
GenJnlLine.Quantity := 0;
GenJnlLine."VAT Difference" := 0;
... -
Cambie el código en la función AddSalesLine en la Codeunit de calcular el impuesto sobre las ventas (398) como sigue:
Código existente 1..."Round Tax" := TaxArea."Round Tax";
TaxJurisdiction.GET("Tax Jurisdiction Code");
"Is Report-to Jurisdiction" := ("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
// Delete the following line.
"Tax Base Amount" := (SalesLine."Line Amount" - SalesLine."Inv. Discount Amount") / ExchangeFactor;
// End of the deleted line.
"Line Amount" := SalesLine."Line Amount" / ExchangeFactor;
"Tax Liable" := SalesLine."Tax Liable";
Quantity := SalesLine."Quantity (Base)";
"Invoice Discount Amount" := SalesLine."Inv. Discount Amount";
...Código nuevo 1
..."Round Tax" := TaxArea."Round Tax";
TaxJurisdiction.GET("Tax Jurisdiction Code");
"Is Report-to Jurisdiction" := ("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,SalesLine."Line Amount" - SalesLine."Inv. Discount Amount",ExchangeFactor,FALSE);
// End of the added line.
"Line Amount" := SalesLine."Line Amount" / ExchangeFactor;
"Tax Liable" := SalesLine."Tax Liable";
Quantity := SalesLine."Quantity (Base)";
"Invoice Discount Amount" := SalesLine."Inv. Discount Amount";
...Código existente 2
...END ELSE BEGIN
"Line Amount" := "Line Amount" + (SalesLine."Line Amount" / ExchangeFactor);
IF SalesLine."Tax Liable" THEN
"Tax Liable" := SalesLine."Tax Liable";
// Delete the following line.
"Tax Base Amount" := "Tax Base Amount" + ((SalesLine."Line Amount" - SalesLine."Inv. Discount Amount") / ExchangeFactor);
// End of the deleted line.
"Tax Amount" := 0;
Quantity := Quantity + SalesLine."Quantity (Base)";
"Invoice Discount Amount" := "Invoice Discount Amount" + SalesLine."Inv. Discount Amount";
MODIFY;
...Código nuevo 2
...END ELSE BEGIN
"Line Amount" := "Line Amount" + (SalesLine."Line Amount" / ExchangeFactor);
IF SalesLine."Tax Liable" THEN
"Tax Liable" := SalesLine."Tax Liable";
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,SalesLine."Line Amount" - SalesLine."Inv. Discount Amount",ExchangeFactor,TRUE);
// End of the added line.
"Tax Amount" := 0;
Quantity := Quantity + SalesLine."Quantity (Base)";
"Invoice Discount Amount" := "Invoice Discount Amount" + SalesLine."Inv. Discount Amount";
MODIFY;
... -
Cambie el código en la función AddSalesInvoiceLines en la Codeunit de calcular el impuesto sobre las ventas (398) como sigue:
Código existente 1..."Is Report-to Jurisdiction" :=
("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
"Line Amount" := SalesInvoiceLine."Line Amount" / ExchangeFactor;
// Delete the following line.
"Tax Base Amount" := SalesInvoiceLine."VAT Base Amount" / ExchangeFactor;
// End of the deleted line.
Quantity := SalesInvoiceLine.Quantity;
"Tax Liable" := SalesInvoiceLine."Tax Liable";
"Calculation Order" := TaxAreaLine."Calculation Order";
InsertRec := TRUE;
...Código nuevo 1
..."Is Report-to Jurisdiction" :=
("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
"Line Amount" := SalesInvoiceLine."Line Amount" / ExchangeFactor;
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,SalesInvoiceLine."VAT Base Amount",ExchangeFactor,FALSE);
// End of the added line.
Quantity := SalesInvoiceLine.Quantity;
"Tax Liable" := SalesInvoiceLine."Tax Liable";
"Calculation Order" := TaxAreaLine."Calculation Order";
InsertRec := TRUE;
...Código existente 2
...InsertRec := TRUE;
INSERT;
END ELSE BEGIN
"Line Amount" := "Line Amount" + (SalesInvoiceLine."Line Amount" / ExchangeFactor);
// Delete the following line.
"Tax Base Amount" := "Tax Base Amount" + (SalesInvoiceLine."VAT Base Amount" / ExchangeFactor);
// End of the deleted line.
Quantity := Quantity + SalesInvoiceLine.Quantity;
IF SalesInvoiceLine."Tax Liable" THEN
"Tax Liable" := SalesInvoiceLine."Tax Liable";
InsertRec := FALSE;
...Código nuevo 2
...InsertRec := TRUE;
INSERT;
END ELSE BEGIN
"Line Amount" := "Line Amount" + (SalesInvoiceLine."Line Amount" / ExchangeFactor);
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,SalesInvoiceLine."VAT Base Amount",ExchangeFactor,TRUE);
// End of the added line.
Quantity := Quantity + SalesInvoiceLine.Quantity;
IF SalesInvoiceLine."Tax Liable" THEN
"Tax Liable" := SalesInvoiceLine."Tax Liable";
InsertRec := FALSE;
... -
Cambie el código en la función AddSalesCrMemoLines en la Codeunit de calcular el impuesto sobre las ventas (398) como sigue:
Código existente 1..."Is Report-to Jurisdiction" :=
("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
"Line Amount" := SalesCrMemoLine."Line Amount" / ExchangeFactor;
// Delete the following line.
"Tax Base Amount" := SalesCrMemoLine."VAT Base Amount" / ExchangeFactor;
// End of the deleted line.
Quantity := SalesCrMemoLine.Quantity;
"Tax Liable" := SalesCrMemoLine."Tax Liable";
"Calculation Order" := TaxAreaLine."Calculation Order";
InsertRec := TRUE;
...Código nuevo 1
..."Is Report-to Jurisdiction" :=
("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
"Line Amount" := SalesCrMemoLine."Line Amount" / ExchangeFactor;
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,SalesCrMemoLine."VAT Base Amount",ExchangeFactor,FALSE);
// End of the added line.
Quantity := SalesCrMemoLine.Quantity;
"Tax Liable" := SalesCrMemoLine."Tax Liable";
"Calculation Order" := TaxAreaLine."Calculation Order";
InsertRec := TRUE;
...Código existente 2
...InsertRec := TRUE;
INSERT;
END ELSE BEGIN
"Line Amount" := "Line Amount" + (SalesCrMemoLine."Line Amount" / ExchangeFactor);
// Delete the following line.
"Tax Base Amount" := "Tax Base Amount" + (SalesCrMemoLine."VAT Base Amount" / ExchangeFactor);
// End of the deleted line.
Quantity := Quantity + SalesCrMemoLine.Quantity;
IF SalesCrMemoLine."Tax Liable" THEN
"Tax Liable" := SalesCrMemoLine."Tax Liable";
InsertRec := FALSE;
...Código nuevo 2
...InsertRec := TRUE;
INSERT;
END ELSE BEGIN
"Line Amount" := "Line Amount" + (SalesCrMemoLine."Line Amount" / ExchangeFactor);
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,SalesCrMemoLine."VAT Base Amount",ExchangeFactor,TRUE);
// End of the added line.
Quantity := Quantity + SalesCrMemoLine.Quantity;
IF SalesCrMemoLine."Tax Liable" THEN
"Tax Liable" := SalesCrMemoLine."Tax Liable";
InsertRec := FALSE;
... -
Cambie el código en la función AddPurchLine en la Codeunit de calcular el impuesto sobre las ventas (398) como sigue:
Código existente 1..."Round Tax" := TaxArea."Round Tax";
TaxJurisdiction.GET("Tax Jurisdiction Code");
"Is Report-to Jurisdiction" := ("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
// Delete the following line.
"Tax Base Amount" := (PurchLine."Line Amount" - PurchLine."Inv. Discount Amount") / ExchangeFactor;
// End of the deleted line.
"Line Amount" := PurchLine."Line Amount" / ExchangeFactor;
"Tax Liable" := PurchLine."Tax Liable";
"Use Tax" := PurchLine."Use Tax";
...Código nuevo 1
..."Round Tax" := TaxArea."Round Tax";
TaxJurisdiction.GET("Tax Jurisdiction Code");
"Is Report-to Jurisdiction" := ("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,PurchLine."Line Amount" - PurchLine."Inv. Discount Amount",ExchangeFactor,FALSE);
// End of the added line.
"Line Amount" := PurchLine."Line Amount" / ExchangeFactor;
"Tax Liable" := PurchLine."Tax Liable";
"Use Tax" := PurchLine."Use Tax";
...Código existente 2
...END ELSE BEGIN
"Line Amount" := "Line Amount" + (PurchLine."Line Amount" / ExchangeFactor);
IF PurchLine."Tax Liable" THEN
"Tax Liable" := PurchLine."Tax Liable";
// Delete the following line.
"Tax Base Amount" := "Tax Base Amount" + ((PurchLine."Line Amount" - PurchLine."Inv. Discount Amount") / ExchangeFactor);
// End of the deleted line.
"Tax Amount" := 0;
Quantity := Quantity + PurchLine."Quantity (Base)";
"Invoice Discount Amount" := "Invoice Discount Amount" + PurchLine."Inv. Discount Amount";
MODIFY;
...Código nuevo 2
...END ELSE BEGIN
"Line Amount" := "Line Amount" + (PurchLine."Line Amount" / ExchangeFactor);
IF PurchLine."Tax Liable" THEN
"Tax Liable" := PurchLine."Tax Liable";
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,PurchLine."Line Amount" - PurchLine."Inv. Discount Amount",ExchangeFactor,TRUE);
// End of the added line.
"Tax Amount" := 0;
Quantity := Quantity + PurchLine."Quantity (Base)";
"Invoice Discount Amount" := "Invoice Discount Amount" + PurchLine."Inv. Discount Amount";
MODIFY;
... -
Cambie el código en la función AddPurchInvoiceLines en la Codeunit de calcular el impuesto sobre las ventas (398) como sigue:
Código existente 1..."Is Report-to Jurisdiction" :=
("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
"Line Amount" := PurchInvLine."Line Amount" / ExchangeFactor;
// Delete the following line.
"Tax Base Amount" := PurchInvLine."VAT Base Amount" / ExchangeFactor;
// End of the deleted line.
Quantity := PurchInvLine.Quantity;
"Tax Liable" := PurchInvLine."Tax Liable";
"Use Tax" := PurchInvLine."Use Tax";
...Código nuevo 1
..."Is Report-to Jurisdiction" :=
("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
"Line Amount" := PurchInvLine."Line Amount" / ExchangeFactor;
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,PurchInvLine."VAT Base Amount",ExchangeFactor,FALSE);
// End of the added line.
Quantity := PurchInvLine.Quantity;
"Tax Liable" := PurchInvLine."Tax Liable";
"Use Tax" := PurchInvLine."Use Tax";
...Código existente 2
...InsertRec := TRUE;
INSERT;
END ELSE BEGIN
"Line Amount" := "Line Amount" + (PurchInvLine."Line Amount" / ExchangeFactor);
// Delete the following line.
"Tax Base Amount" := "Tax Base Amount" + (PurchInvLine."VAT Base Amount" / ExchangeFactor);
// End of the deleted line.
Quantity := Quantity + PurchInvLine.Quantity;
IF PurchInvLine."Tax Liable" THEN
"Tax Liable" := PurchInvLine."Tax Liable";
InsertRec := FALSE;
...Código nuevo 2
...InsertRec := TRUE;
INSERT;
END ELSE BEGIN
"Line Amount" := "Line Amount" + (PurchInvLine."Line Amount" / ExchangeFactor);
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,PurchInvLine."VAT Base Amount",ExchangeFactor,TRUE);
// End of the added line.
Quantity := Quantity + PurchInvLine.Quantity;
IF PurchInvLine."Tax Liable" THEN
"Tax Liable" := PurchInvLine."Tax Liable";
InsertRec := FALSE;
... -
Cambie el código en la función AddPurchCrMemoLines en la Codeunit de calcular el impuesto sobre las ventas (398) como sigue:
Código existente 1..."Is Report-to Jurisdiction" :=
("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
"Line Amount" := PurchCrMemoLine."Line Amount" / ExchangeFactor;
// Delete the following line.
"Tax Base Amount" := PurchCrMemoLine."VAT Base Amount" / ExchangeFactor;
// End of the deleted line.
Quantity := PurchCrMemoLine.Quantity;
"Tax Liable" := PurchCrMemoLine."Tax Liable";
"Use Tax" := PurchCrMemoLine."Use Tax";
...Código nuevo 1
..."Is Report-to Jurisdiction" :=
("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
"Line Amount" := PurchCrMemoLine."Line Amount" / ExchangeFactor;
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,PurchCrMemoLine."VAT Base Amount",ExchangeFactor,FALSE);
// End of the added line.
Quantity := PurchCrMemoLine.Quantity;
"Tax Liable" := PurchCrMemoLine."Tax Liable";
"Use Tax" := PurchCrMemoLine."Use Tax";
...Código existente 2
...InsertRec := TRUE;
INSERT;
END ELSE BEGIN
"Line Amount" := "Line Amount" + (PurchCrMemoLine."Line Amount" / ExchangeFactor);
// Delete the following line.
"Tax Base Amount" := "Tax Base Amount" + (PurchCrMemoLine."VAT Base Amount" / ExchangeFactor);
// End of the deleted line.
Quantity := Quantity + PurchCrMemoLine.Quantity;
IF PurchCrMemoLine."Tax Liable" THEN
"Tax Liable" := PurchCrMemoLine."Tax Liable";
InsertRec := FALSE;
...Código nuevo 2
...InsertRec := TRUE;
INSERT;
END ELSE BEGIN
"Line Amount" := "Line Amount" + (PurchCrMemoLine."Line Amount" / ExchangeFactor);
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,PurchCrMemoLine."VAT Base Amount",ExchangeFactor,TRUE);
// End of the added line.
Quantity := Quantity + PurchCrMemoLine.Quantity;
IF PurchCrMemoLine."Tax Liable" THEN
"Tax Liable" := PurchCrMemoLine."Tax Liable";
InsertRec := FALSE;
... -
Cambie el código en la función AddServiceLine en la Codeunit de calcular el impuesto sobre las ventas (398) como sigue:
Código existente 1..."Round Tax" := TaxArea."Round Tax";
TaxJurisdiction.GET("Tax Jurisdiction Code");
"Is Report-to Jurisdiction" := ("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
// Delete the following line.
"Tax Base Amount" := (ServiceLine."Line Amount" - ServiceLine."Inv. Discount Amount") / ExchangeFactor;
// End of the deleted line.
"Line Amount" := ServiceLine."Line Amount" / ExchangeFactor;
"Tax Liable" := ServiceLine."Tax Liable";
Quantity := ServiceLine."Quantity (Base)";
"Invoice Discount Amount" := ServiceLine."Inv. Discount Amount";
...Código nuevo 1
..."Round Tax" := TaxArea."Round Tax";
TaxJurisdiction.GET("Tax Jurisdiction Code");
"Is Report-to Jurisdiction" := ("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,ServiceLine."Line Amount" - ServiceLine."Inv. Discount Amount",ExchangeFactor,FALSE);
// End of the added line.
"Line Amount" := ServiceLine."Line Amount" / ExchangeFactor;
"Tax Liable" := ServiceLine."Tax Liable";
Quantity := ServiceLine."Quantity (Base)";
"Invoice Discount Amount" := ServiceLine."Inv. Discount Amount";
...Código existente 2
...END ELSE BEGIN
"Line Amount" := "Line Amount" + (ServiceLine."Line Amount" / ExchangeFactor);
IF ServiceLine."Tax Liable" THEN
"Tax Liable" := ServiceLine."Tax Liable";
// Delete the following line.
"Tax Base Amount" :=
"Tax Base Amount" + ((ServiceLine."Line Amount" - ServiceLine."Inv. Discount Amount") / ExchangeFactor);
// End of the deleted line.
"Tax Amount" := 0;
Quantity := Quantity + ServiceLine."Quantity (Base)";
"Invoice Discount Amount" := "Invoice Discount Amount" + ServiceLine."Inv. Discount Amount";
MODIFY;
...Código nuevo 2
...END ELSE BEGIN
"Line Amount" := "Line Amount" + (ServiceLine."Line Amount" / ExchangeFactor);
IF ServiceLine."Tax Liable" THEN
"Tax Liable" := ServiceLine."Tax Liable";
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,ServiceLine."Line Amount" - ServiceLine."Inv. Discount Amount",ExchangeFactor,TRUE);
// End of the added line.
"Tax Amount" := 0;
Quantity := Quantity + ServiceLine."Quantity (Base)";
"Invoice Discount Amount" := "Invoice Discount Amount" + ServiceLine."Inv. Discount Amount";
MODIFY;
... -
Cambie el código en la función AddServInvoiceLines en la Codeunit de calcular el impuesto sobre las ventas (398) como sigue:
Código existente 1..."Is Report-to Jurisdiction" :=
("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
"Line Amount" := ServInvLine."Line Amount" / ExchangeFactor;
// Delete the following lines.
"Tax Base Amount" := ServInvLine."VAT Base Amount" / ExchangeFactor;
Quantity := ServInvLine.Quantity;
"Tax Liable" := ServInvLine."Tax Liable";
// End of the deleted line.
"Calculation Order" := TaxAreaLine."Calculation Order";
InsertRec := TRUE;
INSERT;
...Código nuevo 1
..."Is Report-to Jurisdiction" :=
("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
"Line Amount" := ServInvLine."Line Amount" / ExchangeFactor;
// Add the following lines.
SetTaxBaseAmount(TempSalesTaxLine,ServInvLine."VAT Base Amount",ExchangeFactor,FALSE);
Quantity := ServInvLine.Quantity;
"Tax Liable" := ServInvLine."Tax Liable";
// End of the added lines.
"Calculation Order" := TaxAreaLine."Calculation Order";
InsertRec := TRUE;
INSERT;
...Código existente 2
...InsertRec := TRUE;
INSERT;
END ELSE BEGIN
"Line Amount" := "Line Amount" + (ServInvLine."Line Amount" / ExchangeFactor);
// Delete the following line.
"Tax Base Amount" := "Tax Base Amount" + (ServInvLine."VAT Base Amount" / ExchangeFactor);
// End of the deleted line.
Quantity := Quantity + ServInvLine.Quantity;
IF ServInvLine."Tax Liable" THEN
"Tax Liable" := ServInvLine."Tax Liable";
InsertRec := FALSE;
...Código nuevo 2
...InsertRec := TRUE;
INSERT;
END ELSE BEGIN
"Line Amount" := "Line Amount" + (ServInvLine."Line Amount" / ExchangeFactor);
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,ServInvLine."VAT Base Amount",ExchangeFactor,TRUE);
// End of the added line.
Quantity := Quantity + ServInvLine.Quantity;
IF ServInvLine."Tax Liable" THEN
"Tax Liable" := ServInvLine."Tax Liable";
InsertRec := FALSE;
... -
Cambie el código en la función AddServCrMemoLines en la Codeunit de calcular el impuesto sobre las ventas (398) como sigue:
Código existente 1..."Is Report-to Jurisdiction" :=
("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
"Line Amount" := ServCrMemoLine."Line Amount" / ExchangeFactor;
// Delete the following line.
"Tax Base Amount" := ServCrMemoLine."VAT Base Amount" / ExchangeFactor;
// End of the deleted line.
Quantity := ServCrMemoLine.Quantity;
"Tax Liable" := ServCrMemoLine."Tax Liable";
"Calculation Order" := TaxAreaLine."Calculation Order";
...Código nuevo 1
..."Is Report-to Jurisdiction" :=
("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
"Line Amount" := ServCrMemoLine."Line Amount" / ExchangeFactor;
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,ServCrMemoLine."VAT Base Amount",ExchangeFactor,FALSE);
// End of the added line.
Quantity := ServCrMemoLine.Quantity;
"Tax Liable" := ServCrMemoLine."Tax Liable";
"Calculation Order" := TaxAreaLine."Calculation Order";
...Código existente 2
...InsertRec := TRUE;
INSERT;
END ELSE BEGIN
"Line Amount" := "Line Amount" + (ServCrMemoLine."Line Amount" / ExchangeFactor);
// Delete the following line.
"Tax Base Amount" := "Tax Base Amount" + (ServCrMemoLine."VAT Base Amount" / ExchangeFactor);
// End of the deleted line.
Quantity := Quantity + ServCrMemoLine.Quantity;
IF ServCrMemoLine."Tax Liable" THEN
"Tax Liable" := ServCrMemoLine."Tax Liable";
InsertRec := FALSE;
...Código nuevo 2
...InsertRec := TRUE;
INSERT;
END ELSE BEGIN
"Line Amount" := "Line Amount" + (ServCrMemoLine."Line Amount" / ExchangeFactor);
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,ServCrMemoLine."VAT Base Amount",ExchangeFactor,TRUE);
// End of the added line.
Quantity := Quantity + ServCrMemoLine.Quantity;
IF ServCrMemoLine."Tax Liable" THEN
"Tax Liable" := ServCrMemoLine."Tax Liable";
InsertRec := FALSE;
... -
Agregue una función SetTaxBaseAmount en la Codeunit de calcular el impuesto sobre las ventas (398) como sigue:
LOCAL PROCEDURE SetTaxBaseAmount@1020031(VAR SalesTaxAmountLine@1020001 : Record 10011;Value@1020000 : Decimal;ExchangeFactor@1020002 : Decimal;Increment@1020003 : Boolean); BEGIN
WITH SalesTaxAmountLine DO BEGIN
IF Increment THEN
"Tax Base Amount FCY" += Value
ELSE
"Tax Base Amount FCY" := Value;
"Tax Base Amount" := "Tax Base Amount FCY" / ExchangeFactor;
END;
END;
Requisitos previos
Debe tener uno de los siguientes productos instalados para aplicar esta revisión:
-
La versión norteamericana de Microsoft Dynamics NAV 2009 R2
-
La versión norteamericana de Service Pack 1 de Microsoft Dynamics NAV 2009
Información de eliminación
No se puede quitar este hotfix.
Estado
Microsoft ha confirmado que se trata de un problema de los productos de Microsoft que se enumeran en la sección "Aplicable a".
Nota: Es un artículo "Publicación rápida" creado directamente desde dentro de la organización de soporte técnico de Microsoft. La información contenida en este documento se proporciona como está en respuesta a nuevos problemas. Como consecuencia de la velocidad en la puesta a disposición, los materiales pueden incluir errores tipográficos y podrán revisarse en cualquier momento sin previo aviso. Para obtener información adicional, consulte Condiciones de uso.
