Related topics
×
Sign in with Microsoft
Sign in or create an account.
Hello,
Select a different account.
You have multiple accounts
Choose the account you want to sign in with.

Release Date:

6/13/2017

Version:

Monthly Rollup

Improvements and fixes

This security update includes improvements and fixes that were a part of update KB4019217 (released May 16th, 2017) and resolves the following issues:

  • Addressed issue where, after installing KB3170455 (MS16-087), users have difficulty importing printer drivers and get errors with error code 0x80070bcb.

  • Addressed a rare issue where mouse input can cease to function. The mouse pointer may continue to move, but movements and clicks produce no response other than a beeping noise.

  • Addressed issue where printing a document using a 32-bit application can crash a Print Server in a call to nt!MiGetVadWakeList.

  • Addressed issue where an unsupported hardware notification is shown and Windows Updates not scanning, for systems using the AMD Carrizo DDR4 processor or Windows Server 2012 R2 systems using Xeon E3V6 processor. For the affected system, follow the steps in the Additional Information section below to install this update.

  • Security updates to Microsoft Windows PDF, Windows shell, Windows Kernel, Microsoft Graphics Component, Microsoft Uniscribe, Microsoft Scripting Engine, Internet Explorer, Windows COM, and Windows Kernel-Mode Drivers. For more information about the security vulnerabilities resolved, please refer to the Security Update Guide.

Known issues in this update

Symptom

Workaround

When you print a specific iframe or frame in a web page, the print output may be blank, or text is printed that resembles the following: 

404 – Not Found

 (A frame is a part of a web page or browser window that displays content independent of its container. A frame can load content independently.)

This problem has also been observed in both Internet Explorer versions 9 through 11, and in applications that host the IE Web Browser Control.

This issue is resolved by KB4022720.

If an iSCSI target becomes unavailable, attempts to reconnect will cause a leak. Initiating a new connection to an available target will work as expected.

Microsoft is working on a resolution and will provide an update in an upcoming release. 
For more information about this issue, see the following section.

Windows Server 2012 R2 and Server 2016 computers that experience disconnections to iSCSI attached targets may show many different symptoms. These include, but are not limited to:

  • The operating system stops responding

  • You receive Stop errors (Bugcheck errors) 0x80, 0x111, 0x1C8, 0xE2, 0x161, 0x00, 0xF4, 0xEF, 0xEA, 0x101, 0x133, or 0xDEADDEAD.

  • User log on failures occur together with a "No Logon Servers Available" error.

  • Application and service failures occur because of ephemeral port exhaustion.

  • An unusually high number of ephemeral ports are being used by the System process.

  • An unusually high number of threads are being used by the System process.

Cause

This issue is caused by a locking issue on Windows Server 2012 R2 and Windows Server 2016 RS1 computers, causing connectivity issues to the iSCSI targets. The issue can occur after installing any of the following updates:

Windows Server 2012 R2

Release date

KB

Article title

May 16, 2017

KB 4015553

April 18, 2017—KB4015553 (Preview of Monthly Rollup)

May 9, 2017

KB 4019215

May 9, 2017—KB4019215 (Monthly Rollup)

May 9, 2017

KB 4019213

May 9, 2017—KB4019213 (Security-only update)

April 18, 2017

KB 4015553

April 18, 2017—KB4015553 (Preview of Monthly Rollup)

April 11, 2017

KB 4015550

April 11, 2017—KB4015550 (Monthly Rollup)

April 11, 2017

KB 4015547

April 11, 2017—KB4015547 (Security-only update)

March 21, 2017

KB 4012219

March 2017 Preview of Monthly Quality Rollup for Windows 8.1 and Windows Server 2012 R2

Windows Server 2016 RTM (RS1) 

Release date

KB

Article title

May 16, 2017

KB 4023680

May 26, 2017—KB4023680 (OS Build 14393.1230)

May 9, 2017

KB 4019472

May 9, 2017—KB4019472 (OS Build 14393.1198)

April 11, 2017

KB 4015217

April 11, 2017—KB4015217 (OS Build 14393.1066 and 14393.1083)


Verification

  • Verify the version of the following MSISCSI driver on the system:

    c:\windows\system32\drivers\msiscsi.sys

    The version that will expose this behavior is 6.3.9600.18624 for Windows Server 2012 R2 and version 10.0.14393.1066 for Windows Server 2016.

  • The following events are logged in the System log:

    Event source

    ID

    Text

    iScsiPrt

    34

    A connection to the target was lost, but the Initiator successfully reconnected to the target. Dump data contains the target name.

    iScsiPrt

    39

    The Initiator sent a task management command to reset the target. The target name is given in the dump data.

    iScsiPrt

    9

    Target did not respond in time for a SCSI request. The CDB is given in the dump data.

  • Review the number of threads that are running under the System process, and compare this to a known working baseline.

  • Review the number of handles that are currently opened by the System process, and compare this to a known working baseline.

  • Review the number of ephemeral ports that are being used by the System process.

  • From an administrative Powershell, run the following command:

    Get-NetTCPConnection | Group-Object -Property State, OwningProcess | Sort Count

    Or, from an administrative CMD prompt, run the following NETSTAT command together with the "Q" switch. This shows "bound" ports that are no longer connected:

    NETSTAT –ANOQ

    Focus on ports that are owned by the SYSTEM process.

    For the three previous points, anything more than 12,000 should be considered suspect. If iSCSI targets are present in the computer, there is high probability that the issue will occur.

Resolution

If the event logs indicate that many reconnections are occurring, work with your iSCSI and network fabric vendor to help diagnose and correct the reason for the failure to maintain connections to iSCSI targets. Make sure that iSCSI targets can be accessed over the current network fabric. Install updated fixes when they become available. This article will be updated with the specific KB article number of the fix to install when it becomes available.

Note We do not recommend that you uninstall any of the March, April, May, or June security rollups. Doing so will expose the computers to known security exploits and other bugs that are mitigated by monthly updates. We recommend that you first work with iSCSI target and network vendors to resolve the connectivity issues that are triggering target reconnects.

How to get this update

This update will be downloaded and installed automatically from Windows Update. To get the stand-alone package for this update, go to the Microsoft Update Catalog website.

Prerequisites You must have the following update installed:

2919355 Windows RT 8.1, Windows 8.1, and Windows Server 2012 R2 update: April 2014

Additional Information

Installation steps for systems using AMD Carrizo DDR4 processor or Windows Server 2012 R2 systems using Xeon E3V6 processor:

  1. Download KB4022726 from Microsoft Update Catalogwebsite.

  2. Extract the CAB file from the downloaded .msu file from step 1. Note the path where you stored the CAB file for use in step 3.

  3. Run the DISM /Online /Add-Package command to install the update: DISM.exe /Online /Add-Package /PackagePath: CAB file path from step 2.

Need more help?

Want more options?

Explore subscription benefits, browse training courses, learn how to secure your device, and more.

Communities help you ask and answer questions, give feedback, and hear from experts with rich knowledge.

Was this information helpful?

What affected your experience?
By pressing submit, your feedback will be used to improve Microsoft products and services. Your IT admin will be able to collect this data. Privacy Statement.

Thank you for your feedback!

×