이 문서의 Microsoft Dynamics 탐색 언어 로캘을 스페인어 (es)에 적용 됩니다.
증상
스페인어 버전의 Microsoft Dynamics 탐색 2013 205 보고서 및 405 보고서를 실행할 때 열 제목 / VAT 양 사양 섹션에서 누락 된.
해결 방법
핫픽스 정보
지원 되는 핫픽스를 Microsoft에서 출시 되었습니다. 이 문서에 설명 되어 있는 문제를 해결 하기 위한 것일 뿐입니다. 이러한 특정 문제가 발생 한 시스템에만 적용 됩니다. 이 핫픽스는 추가 테스트가 필요할 수 있습니다. 따라서이 문제의 영향이 심각 하지 다음 Microsoft Dynamics 탐색 2013 서비스 팩 또는이 핫픽스가 포함 된 다음 Microsoft Dynamics 탐색 버전까지 기다리는 것이 좋습니다.
참고: 특별 한 경우 일반적으로 호출 취소 될 수도 있습니다 경우 기술 지원 담당자는 Microsoft Dynamics 및 관련 된 제품에 대 한 지원에 따른 비용이 특정 업데이트로 문제를 해결할 수 있다고 결정 합니다. 추가 지원 질문과 특정 업데이트가 필요 하지 않은 문제에는 일반 지원 비용이 적용 됩니다.
설치 정보
Microsoft는 모든 보증, 그림에 대 한 묵시적인 보증. 이 포함 되지만 상품성 또는 특정 목적에의 적합성의 묵시적된 보증에 국한 되지는 않습니다. 이 문서는 작성 하 고 프로시저를 디버깅할 데 사용 되는 도구 및 여기서 설명 하는 프로그래밍 언어에 익숙한 가정 합니다. Microsoft 지원 엔지니어는 특정 프로시저의 기능을 설명할 수 있습니다. 그러나이 예제에서는 추가 기능을 제공 하거나 특정 요구 사항에 맞도록 프로시저를 구성 하려면 수정 하지 않습니다.
참고: 이 핫픽스를 설치 하기 전에 모든 Microsoft Navision 클라이언트 사용자가 시스템 로그를 확인 하십시오. Navision 응용 프로그램 서비스 (NAS) 클라이언트 사용자가 포함 됩니다. 이 핫픽스를 구현할 때 로그온 되어 있는 사용자만 클라이언트 수 있습니다.
이 핫픽스를 구현 하려면 개발자 라이센스가 있어야 합니다.
것을 권장 합니다 Windows 로그인 창이 나 데이터베이스 로그인 창에서 사용자 계정 "SUPER" 역할 ID를 할당할 수 사용자 계정 "SUPER" 역할 ID를 할당할 수 없습니다, 사용자 계정에 다음 권한이 있는지 확인 해야 합니다.
-
변경할 수 있는 개체에 대 한 수정 권한이 있습니다.
-
시스템 개체 ID 9015 개체 및 시스템 개체 ID 5210 개체에 대 한 Execute 권한이 있습니다.
참고: 데이터 복구를 수행 해야 할 경우가 아니면 데이터 저장소에 대 한 권한을 가질 필요가 없습니다.
코드 변경 사항
참고: 항상 테스트 코드 수정 제어 된 환경에 적용 하기 전에 프로덕션 컴퓨터에 수정 프로그램입니다.
이 문제를 해결하려면 다음과 같이 하십시오.
-
(205) 주문 확인 보고서에서 속성의 코드를 다음과 같이 변경.
기존 코드... SourceExpr=PrepmtVATAmountLine."VAT Identifier" }
{ 191 ;4 ;Column ;PrepaymentVATAmtSpecCaption;
SourceExpr=PrepaymentVATAmtSpecCaptionLbl }
{ 7808;3 ;DataItem;PrepmtTotal ;
DataItemTable=Table2000000026;
DataItemTableView=SORTING(Number)
WHERE(Number=CONST(1));
OnPreDataItem=BEGIN
...대체 코드
... SourceExpr=PrepmtVATAmountLine."VAT Identifier" }
{ 191 ;4 ;Column ;PrepaymentVATAmtSpecCaption;
SourceExpr=PrepaymentVATAmtSpecCaptionLbl }
// Add the following lines.
{ 1101001;4;Column ;PrepmtVATPercentCaption;
SourceExpr=VATPecrentCaptionLbl }
{ 1101002;4;Column ;PrepmtVATBaseCaption;
SourceExpr=VATECBaseCaptionLbl }
{ 1101003;4;Column ;PrepmtVATAmtCaption ;
SourceExpr=VATAmountCaptionLbl }
{ 1101004;4;Column ;PrepmtVATIdentCaption;
SourceExpr=VATIdentifierCaptionLbl }
{ 1101005;4;Column ;PrepmtLineAmtCaption;
SourceExpr=LineAmountCaptionLbl }
{ 1101006;4;Column ;PrepmtTotalCaption ;
SourceExpr=TotalCaptionLbl }
// End of the lines.
{ 7808;3 ;DataItem;PrepmtTotal ;
DataItemTable=Table2000000026;
DataItemTableView=SORTING(Number)
WHERE(Number=CONST(1));
OnPreDataItem=BEGIN
... -
BlanksForIndent 함수 (205) 주문 확인 보고서에서의 코드를 다음과 같이 변경.
기존 코드 1... <DataField>VATIdentifier_PrepmtVATAmtLine</DataField>
</Field>
<Field Name="PrepaymentVATAmtSpecCaption">
<DataField>PrepaymentVATAmtSpecCaption</DataField>
</Field>
<Field Name="PrepmtPaymentTermsDesc">
<DataField>PrepmtPaymentTermsDesc</DataField>
</Field>
<Field Name="PrepmtPaymentTermsCaption">
<DataField>PrepmtPaymentTermsCaption</DataField>
...대체 코드 1
... <DataField>VATIdentifier_PrepmtVATAmtLine</DataField>
</Field>
<Field Name="PrepaymentVATAmtSpecCaption">
<DataField>PrepaymentVATAmtSpecCaption</DataField>
</Field>
// Add the following lines.
<Field Name="PrepmtVATPercentCaption">
<DataField>PrepmtVATPercentCaption</DataField>
</Field>
<Field Name="PrepmtVATBaseCaption">
<DataField>PrepmtVATBaseCaption</DataField>
</Field>
<Field Name="PrepmtVATAmtCaption">
<DataField>PrepmtVATAmtCaption</DataField>
</Field>
<Field Name="PrepmtVATIdentCaption">
<DataField>PrepmtVATIdentCaption</DataField>
</Field>
<Field Name="PrepmtLineAmtCaption">
<DataField>PrepmtLineAmtCaption</DataField>
</Field>
<Field Name="PrepmtTotalCaption">
<DataField>PrepmtTotalCaption</DataField>
</Field>
// End of the lines.
<Field Name="PrepmtPaymentTermsDesc">
<DataField>PrepmtPaymentTermsDesc</DataField>
</Field>
<Field Name="PrepmtPaymentTermsCaption">
<DataField>PrepmtPaymentTermsCaption</DataField>
...기존 코드 2
... <KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
// Delete the following line.
<Value>=Fields!VATIdentifierCaption.Value</Value>
<Style>
<FontStyle>Normal</FontStyle>
<FontFamily>Segoe UI</FontFamily>
<FontSize>8pt</FontSize>
<FontWeight>Bold</FontWeight>
...대체 코드 2
... <KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
// Add the following line.
<Value>=Fields!PrepmtVATIdentCaption.Value</Value>
<Style>
<FontStyle>Normal</FontStyle>
<FontFamily>Segoe UI</FontFamily>
<FontSize>8pt</FontSize>
<FontWeight>Bold</FontWeight>
...기존 코드 3
... <KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
// Delete the following line.
<Value>=Fields!VATPecrentCaption.Value</Value>
<Style>
<FontStyle>Normal</FontStyle>
<FontFamily>Segoe UI</FontFamily>
<FontSize>8pt</FontSize>
<FontWeight>Bold</FontWeight>
...대체 코드 3
... <KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
// Add the following line.
<Value>=Fields!PrepmtVATPercentCaption.Value</Value>
<Style>
<FontStyle>Normal</FontStyle>
<FontFamily>Segoe UI</FontFamily>
<FontSize>8pt</FontSize>
<FontWeight>Bold</FontWeight>
...기존 코드 4
... <KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
// Delete the following line.
<Value>=Fields!LineAmountCaption.Value</Value>
<Style>
<FontStyle>Normal</FontStyle>
<FontFamily>Segoe UI</FontFamily>
<FontSize>8pt</FontSize>
<FontWeight>Bold</FontWeight>
...대체 코드 4
... <KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
// Add the following line.
<Value>=Fields!PrepmtLineAmtCaption.Value</Value>
<Style>
<FontStyle>Normal</FontStyle>
<FontFamily>Segoe UI</FontFamily>
<FontSize>8pt</FontSize>
<FontWeight>Bold</FontWeight>
...기존 코드 5
... <KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
// Delete the following line.
<Value>=Fields!VATBaseCaption.Value</Value>
<Style>
<FontStyle>Normal</FontStyle>
<FontFamily>Segoe UI</FontFamily>
<FontSize>8pt</FontSize>
<FontWeight>Bold</FontWeight>
...대체 코드 5
... <KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
// Add the following line.
<Value>=Fields!PrepmtVATBaseCaption.Value</Value>
<Style>
<FontStyle>Normal</FontStyle>
<FontFamily>Segoe UI</FontFamily>
<FontSize>8pt</FontSize>
<FontWeight>Bold</FontWeight>
...기존 코드 6
... <KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
// Delete the following line.
<Value>=Fields!VATAmountCaption.Value</Value>
<Style>
<FontStyle>Normal</FontStyle>
<FontFamily>Segoe UI</FontFamily>
<FontSize>8pt</FontSize>
<FontWeight>Bold</FontWeight>
...대체 코드 6
... <KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
// Add the following line.
<Value>=Fields!PrepmtVATAmtCaption.Value</Value>
<Style>
<FontStyle>Normal</FontStyle>
<FontFamily>Segoe UI</FontFamily>
<FontSize>8pt</FontSize>
<FontWeight>Bold</FontWeight>
...기존 코드 7
... <KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
// Delete the following line.
<Value>=Fields!TotalCaption.Value</Value>
<Style>
<FontStyle>Normal</FontStyle>
<FontFamily>Segoe UI</FontFamily>
<FontSize>8pt</FontSize>
<FontWeight>Bold</FontWeight>
...대체 코드 7
... <KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
// Add the following line.
<Value>=Fields!PrepmtTotalCaption.Value</Value>
<Style>
<FontStyle>Normal</FontStyle>
<FontFamily>Segoe UI</FontFamily>
<FontSize>8pt</FontSize>
<FontWeight>Bold</FontWeight>
... -
주문 보고서 (405) 속성의 코드를 다음과 같이 변경.
기존 코드... SourceExpr=PrepmtVATAmountLine."VAT Identifier" }
{ 203 ;4 ;Column ;PrepmtVATAmtSpecCaption;
SourceExpr=PrepmtVATAmtSpecCaptionLbl }
{ 7808;3 ;DataItem;PrepmtTotal ;
DataItemTable=Table2000000026;
DataItemTableView=SORTING(Number)
WHERE(Number=CONST(1));
OnPreDataItem=BEGIN
...대체 코드
... SourceExpr=PrepmtVATAmountLine."VAT Identifier" }
{ 203 ;4 ;Column ;PrepmtVATAmtSpecCaption;
SourceExpr=PrepmtVATAmtSpecCaptionLbl }
// Add the following lines.
{ 1101001;4;Column ;PrepmtVATPercentCaption;
SourceExpr=VATPercentCaptionLbl }
{ 1101002;4;Column ;PrepmtVATBaseCaption;
SourceExpr=VATBaseCaptionLbl }
{ 1101003;4;Column ;PrepmtVATAmtCaption ;
SourceExpr=VATAmtCaptionLbl }
{ 1101004;4;Column ;PrepmtVATIdentCaption;
SourceExpr=VATIdentCaptionLbl }
{ 1101005;4;Column ;PrepmtLineAmtCaption;
SourceExpr=LineAmtCaptionLbl }
{ 1101006;4;Column ;PrepmtTotalCaption ;
SourceExpr=TotalCaptionLbl }
// End of the lines.
{ 7808;3 ;DataItem;PrepmtTotal ;
DataItemTable=Table2000000026;
DataItemTableView=SORTING(Number)
WHERE(Number=CONST(1));
OnPreDataItem=BEGIN
--------------------------------------------------------------------------------
... -
InitializeRequest 함수 (405) 주문 보고서에서의 코드를 다음과 같이 변경.
기존 코드 1... <DataField>PrepmtVATAmtLineVATIdentifier</DataField>
</Field>
<Field Name="PrepmtVATAmtSpecCaption">
<DataField>PrepmtVATAmtSpecCaption</DataField>
</Field>
</Fields>
<Query>
<DataSourceName>DataSource</DataSourceName>
<CommandText />
</Query>
...대체 코드 1
... <DataField>PrepmtVATAmtLineVATIdentifier</DataField>
</Field>
<Field Name="PrepmtVATAmtSpecCaption">
<DataField>PrepmtVATAmtSpecCaption</DataField>
</Field>
// Add the following lines.
<Field Name="PrepmtVATPercentCaption">
<DataField>PrepmtVATPercentCaption</DataField>
</Field>
<Field Name="PrepmtVATBaseCaption">
<DataField>PrepmtVATBaseCaption</DataField>
</Field>
<Field Name="PrepmtVATAmtCaption">
<DataField>PrepmtVATAmtCaption</DataField>
</Field>
<Field Name="PrepmtVATIdentCaption">
<DataField>PrepmtVATIdentCaption</DataField>
</Field>
<Field Name="PrepmtLineAmtCaption">
<DataField>PrepmtLineAmtCaption</DataField>
</Field>
<Field Name="PrepmtTotalCaption">
<DataField>PrepmtTotalCaption</DataField>
</Field>
// End of the lines.
</Fields>
<Query>
<DataSourceName>DataSource</DataSourceName>
<CommandText />
</Query>
...기존 코드 2
... <KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
// Delete the following line.
<Value>=First(Fields!VATIdentCaption.Value)</Value>
<Style>
<FontStyle>Normal</FontStyle>
<FontFamily>Segoe UI</FontFamily>
<FontSize>8pt</FontSize>
<FontWeight>Bold</FontWeight>
...대체 코드 2
... <KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
// Add the following line.
<Value>=First(Fields!PrepmtVATIdentCaption.Value)</Value>
<Style>
<FontStyle>Normal</FontStyle>
<FontFamily>Segoe UI</FontFamily>
<FontSize>8pt</FontSize>
<FontWeight>Bold</FontWeight>
...기존 코드 3
... <KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
// Delete the following line.
<Value>=First(Fields!VATPercentCaption.Value)</Value>
<Style>
<FontStyle>Normal</FontStyle>
<FontFamily>Segoe UI</FontFamily>
<FontSize>8pt</FontSize>
<FontWeight>Bold</FontWeight>
...대체 코드 3
... <KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
// Add the following line.
<Value>=First(Fields!PrepmtVATPercentCaption.Value)</Value>
<Style>
<FontStyle>Normal</FontStyle>
<FontFamily>Segoe UI</FontFamily>
<FontSize>8pt</FontSize>
<FontWeight>Bold</FontWeight>
...기존 코드 4
... <KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
// Delete the following line.
<Value>=First(Fields!LineAmtCaption.Value)</Value>
<Style>
<FontStyle>Normal</FontStyle>
<FontFamily>Segoe UI</FontFamily>
<FontSize>8pt</FontSize>
<FontWeight>Bold</FontWeight>
...대체 코드 4
... <KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
// Add the following line.
<Value>=First(Fields!PrepmtLineAmtCaption.Value)</Value>
<Style>
<FontStyle>Normal</FontStyle>
<FontFamily>Segoe UI</FontFamily>
<FontSize>8pt</FontSize>
<FontWeight>Bold</FontWeight>
...기존 코드 5
... <KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
// Delete the following line.
<Value>=First(Fields!VATBaseCaption.Value)</Value>
<Style>
<FontStyle>Normal</FontStyle>
<FontFamily>Segoe UI</FontFamily>
<FontSize>8pt</FontSize>
<FontWeight>Bold</FontWeight>
...대체 코드 5
... <KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
// Add the following line.
<Value>=First(Fields!PrepmtVATBaseCaption.Value)</Value>
<Style>
<FontStyle>Normal</FontStyle>
<FontFamily>Segoe UI</FontFamily>
<FontSize>8pt</FontSize>
<FontWeight>Bold</FontWeight>
...기존 코드 6
... <KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
// Delete the following line.
<Value>=First(Fields!VATAmtCaption.Value)</Value>
<Style>
<FontStyle>Normal</FontStyle>
<FontFamily>Segoe UI</FontFamily>
<FontSize>8pt</FontSize>
<FontWeight>Bold</FontWeight>
...대체 코드 6
... <KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
// Add the following line.
<Value>=First(Fields!PrepmtVATAmtCaption.Value)</Value>
<Style>
<FontStyle>Normal</FontStyle>
<FontFamily>Segoe UI</FontFamily>
<FontSize>8pt</FontSize>
<FontWeight>Bold</FontWeight>
...기존 코드 7
... <KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
// Delete the following line.
<Value>=First(Fields!TotalCaption.Value)</Value>
<Style>
<FontStyle>Normal</FontStyle>
<FontFamily>Segoe UI</FontFamily>
<FontSize>8pt</FontSize>
<FontWeight>Bold</FontWeight>대체 코드 7
... <KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
// Add the following line.+ <Value>=First(Fields!PrepmtTotalCaption.Value)</Value>
<Style>
<FontStyle>Normal</FontStyle>
<FontFamily>Segoe UI</FontFamily>
<FontSize>8pt</FontSize>
<FontWeight>Bold</FontWeight>
...
전제 조건
스페인어 버전의 Microsoft Dynamics 탐색 도구 2013이이 핫픽스를 적용 하려면 설치 되어 있어야 합니다.
제거 정보
이 핫픽스를 제거할 수 없습니다.
상태
Microsoft는 이 문제가 '적용 대상' 섹션에 나열된 Microsoft 제품의 문제임을 확인했습니다.
참고: 이 문서는 Microsoft 지원 부서 내에서 직접 작성한 "빠른 게시" 문서입니다. 여기에 포함된 정보는 신흥 문제에 대한 응답으로 제공되었습니다. 신속히 사용할 수 있도록 작성되었으므로, 자료 입력 오류가 포함될 수 있으며 언제든지 예고없이 개정될 수 있습니다. 다른 고려 사항은 사용 약관을 참조하십시오.