이 작업에서는
요약
이 문서에서는 Microsoft Word 2000 문서에서 트루타입 글꼴을 포함 하는 방법.
보고 글꼴은 설치 되지 않은 컴퓨터에서 문서를 열 경우에 (사용 권한을 허용 하는) 하는 경우 글꼴, 편집할 수 있도록 문서에 트루타입 글꼴은 포함할 수 있습니다.
Word 문서에서 트루타입 글꼴을 포함 하는 방법
저장 된 Word 문서에서 트루타입 글꼴을 포함 하려면 다음과이 같이 하십시오.
-
도구 메뉴에서, 옵션을 클릭합니다.
-
저장 탭을 클릭 합니다.
-
트루타입 글꼴 포함 확인란을 선택 합니다.
일부 글꼴 포함 될 수 있도록 사용이 허가 됩니다. 글꼴을 포함할 수 트루타입 글꼴 (.ttf) 파일의 크기가 약 의해 문서 파일 크기가 늘어납니다.
참고: 일부 글꼴이 보통, 굵게, 기울임꼴 및 굵은 기울임꼴 별도 글꼴.ttf 파일로 처리 합니다. 이 경우 발행물의 파일 크기가 큰 경우 굵게 및 기울임꼴 서식이 없는 경우에 것 보다 사용 하는 경우
글꼴에 굵게, 기울임꼴 또는 굵게 기울임꼴 버전을 찾을 수 없는 경우 Microsoft Windows 핵심 글꼴에서 굵게 또는 기울임꼴 생성 합니다. 굵게 또는 기울임꼴 서식을 사용 하는 경우이 경우 증가 파일 크기 않습니다 .
라이센스 권한 글꼴 포함 문서에 글꼴 수 포함 하는 방법을 결정 합니다.
Font licensed as Result
---------------------------------------------------------------
Protected The font may not be embedded, copied, or
modified. If you use a protected font in a
document and this document is opened on a computer
that does not have the font installed on it, a
font substitution occurs. Word substitutes the
closest font available on the computer for the
missing protected font.
Print/Preview The font is embedded and temporarily loaded on
the target computer. Documents that contain
print/preview fonts must be opened read-only, and
no edits are stored in the document. Embedding
a font of this nature has the least impact on
file size increase.
Editable The font behaves just like the print/preview
fonts, except that you may also apply the font to
other text in the same document.
Installable The font is installed on the target computer
permanently when you open the document. This
allows you to use the new fonts as if you
installed the fonts directly into Windows
yourself. This type of embedded font has the
greatest impact on file size because the entire
font is included with the document. The
size of the font file can vary greatly. To
estimate the font file size, follow the steps
in the procedure in the next section of this article.
글꼴 파일 크기 추정 방법
참고: 다음 단계에 있기 때문에 여러 버전의 Microsoft Windows 컴퓨터 마다 다를 수 있습니다. 이러한 경우 다음 단계를 완료하려면 해당 제품 설명서를 참조하십시오.
-
시작하 고 설정을 가리킨 다음 제어판을 클릭합니다.
-
글꼴 아이콘을 두 번 클릭 합니다.
-
원하는 글꼴을 마우스 오른쪽 단추로 클릭 하 고 바로 가기 메뉴에서 속성 을 클릭 합니다. 디스크에서 글꼴 크기는 크기 행에 표시 됩니다.