Microsoft Dynamics 탐색 2009의 영국 지역화에서 재고 받은 송장 발부 됨 및 재고 배송 송장 발부 된 보고서를 인쇄할 때 문제를 설명 합니다. 이 문제는 여전히 KB 2882942을 구현한 후 발생 합니다.
이 문제를 해결 하려면 코드 변경 섹션의 단계를 따릅니다. 다음 제품에이 문제가 발생합니다.
-
Microsoft Dynamics 탐색 2009 r 2의 영국 지역화
-
Microsoft Dynamics 탐색 2009 서비스 팩 1 (SP1)의 영국 지역화
해결 방법
핫픽스 정보
지원 되는 핫픽스를 Microsoft에서 출시 되었습니다. 이 문서에 설명 되어 있는 문제를 해결 하기 위한 것일 뿐입니다. 이러한 특정 문제가 발생 한 시스템에만 적용 됩니다. 이 핫픽스는 추가 테스트가 필요할 수 있습니다. 따라서이 문제의 영향이 심각 하지 다음 Microsoft Dynamics 탐색 2009 서비스 팩 또는이 핫픽스가 포함 된 다음 Microsoft Dynamics 탐색 버전까지 기다리는 것이 좋습니다.
참고: 특별 한 경우 일반적으로 호출 취소 될 수도 있습니다 경우 기술 지원 담당자는 Microsoft Dynamics 및 관련 된 제품에 대 한 지원에 따른 비용이 특정 업데이트로 문제를 해결할 수 있다고 결정 합니다. 추가 지원 질문과 특정 업데이트가 필요 하지 않은 문제에는 일반 지원 비용이 적용 됩니다.
설치 정보
Microsoft는 모든 보증, 그림에 대 한 묵시적인 보증. 이 포함 되지만 상품성 또는 특정 목적에의 적합성의 묵시적된 보증에 국한 되지는 않습니다. 이 문서는 작성 하 고 프로시저를 디버깅할 데 사용 되는 도구 및 여기서 설명 하는 프로그래밍 언어에 익숙한 가정 합니다. Microsoft 지원 엔지니어는 특정 프로시저의 기능을 설명할 수 있습니다. 그러나이 예제에서는 추가 기능을 제공 하거나 특정 요구 사항에 맞도록 프로시저를 구성 하려면 수정 하지 않습니다.
참고: 이 핫픽스를 설치 하기 전에 모든 Microsoft Dynamics 탐색 클라이언트 사용자가 시스템 로그를 확인 하십시오. Microsoft Dynamics 탐색 응용 프로그램 서버 (NAS) 서비스가 포함 됩니다. 이 핫픽스를 구현할 때 로그온 되어 있는 사용자만 클라이언트 수 있습니다.
이 핫픽스를 구현 하려면 개발자 라이센스가 있어야 합니다.
것을 권장 합니다 Windows 로그인 창이 나 데이터베이스 로그인 창에서 사용자 계정 "SUPER" 역할 ID를 할당할 수 사용자 계정 "SUPER" 역할 ID를 할당할 수 없습니다, 사용자 계정에 다음 권한이 있는지 확인 해야 합니다.
-
변경할 수 있는 개체에 대 한 수정 권한이 있습니다.
-
시스템 개체 ID 9015 및 시스템 개체 ID 5210 개체에 대 한 실행 권한
개체입니다.
참고: 데이터 복구를 수행 해야 할 경우가 아니면 데이터 저장소에 대 한 권한을 가질 필요가 없습니다.
코드 변경 사항
참고: 항상 테스트 코드 수정 제어 된 환경에 적용 하기 전에 프로덕션 컴퓨터에 수정 프로그램입니다.
이 문제를 해결하려면 다음과 같이 하십시오.
-
재고 받은에서 데이터 항목 번호 1 섹션의 코드를 변경 하지 송장 발부 된 보고서 (10540) 다음과 같습니다.
기존 코드 1...VertAlign=Bottom;
FontBold=Yes;
MultiLine=Yes;
DataSetFieldName=Item_Ledger_Entry__Cost_Amount__Expected__Caption }
{ 1040042;Label ;5700 ;0 ;1550 ;846 ;ParentControl=1040040;
VertAlign=Bottom;
...대체 코드 1
...VertAlign=Bottom;
FontBold=Yes;
MultiLine=Yes;
// Adding the following line.
CaptionML=ENU=Cost Amount (Expected);
// End of the added line.
DataSetFieldName=Item_Ledger_Entry__Cost_Amount__Expected__Caption }
{ 1040042;Label ;5700 ;0 ;1550 ;846 ;ParentControl=1040040;
VertAlign=Bottom;
...기존 코드 2
...SourceExpr="Value Entry"."Invoiced Quantity";
DataSetFieldName=Item_Ledger_Entry___Invoiced_Quantity_ }
{ 1040039;TextBox ;13050;0 ;1800 ;423 ;FontBold=Yes;
// Deleting the following line.
SourceExpr="Item Ledger Entry"."Cost Amount (Expected)";
// End of the deleted line.
DataSetFieldName=Item_Ledger_Entry___Cost_Amount__Expected__ }
{ 1040045;TextBox ;0 ;0 ;5400 ;423 ;FontBold=Yes;
SourceExpr=Text1040005 + ' ' + Item."No.";
...대체 코드 2
...SourceExpr="Value Entry"."Invoiced Quantity";
DataSetFieldName=Item_Ledger_Entry___Invoiced_Quantity_ }
{ 1040039;TextBox ;13050;0 ;1800 ;423 ;FontBold=Yes;
// Adding the following line.
SourceExpr=ItemCostAmtExpected;
// End of the added line.
DataSetFieldName=Item_Ledger_Entry___Cost_Amount__Expected__ }
{ 1040045;TextBox ;0 ;0 ;5400 ;423 ;FontBold=Yes;
SourceExpr=Text1040005 + ' ' + Item."No.";
...기존 코드 3
...DataSetFieldName=Value_Entry___Cost_Amount__Actual__ }
{ 1040059;TextBox ;7350 ;0 ;1550 ;423 ;FontBold=Yes;
CaptionML=ENU=Rec. not invoiced;
// Deleting the following line.
SourceExpr="Item Ledger Entry"."Cost Amount (Expected)" - "Value Entry"."Cost Amount (Actual)";
// End of the deleted line.
DataSetFieldName=Item_Ledger_Entry___Cost_Amount__Expected______Value_Entry___Cost_Amount__Actual__ }
{ 1040064;TextBox ;15000;0 ;1500 ;423 ;FontBold=Yes;
SourceExpr="Value Entry"."Invoiced Quantity";
...대체 코드 3
...DataSetFieldName=Value_Entry___Cost_Amount__Actual__ }
{ 1040059;TextBox ;7350 ;0 ;1550 ;423 ;FontBold=Yes;
CaptionML=ENU=Rec. not invoiced;
// Adding the following line.
SourceExpr=ItemCostAmtExpected - ValueCostAmtActual;
// End of the added line.
DataSetFieldName=Item_Ledger_Entry___Cost_Amount__Expected______Value_Entry___Cost_Amount__Actual__ }
{ 1040064;TextBox ;15000;0 ;1500 ;423 ;FontBold=Yes;
SourceExpr="Value Entry"."Invoiced Quantity";
...기존 코드 4
...DataSetFieldName=Item_Ledger_Entry___Invoiced_Quantity__Control1040067 }
{ 1040068;TextBox ;13050;423 ;1800 ;423 ;FontSize=7;
FontBold=Yes;
// Deleting the following lines.
SourceExpr="Item Ledger Entry"."Cost Amount (Expected)";
DataSetFieldName=Item_Ledger_Entry___Cost_Amount__Expected___Control1040068 }
{ 1040069;TextBox ;7350 ;423 ;1550 ;423 ;FontSize=7;
FontBold=Yes;
CaptionML=ENU=Rec. not invoiced;
SourceExpr="Item Ledger Entry"."Cost Amount (Expected)" - "Value Entry"."Cost Amount (Actual)";
// End of the deleted lines.
DataSetFieldName=Item_Ledger_Entry___Cost_Amount__Expected______Value_Entry___Cost_Amount__Actual___Control1040069 }
{ 1040070;TextBox ;15000;423 ;1500 ;423 ;FontSize=7;
FontBold=Yes;
...대체 코드 4
...DataSetFieldName=Item_Ledger_Entry___Invoiced_Quantity__Control1040067 }
{ 1040068;TextBox ;13050;423 ;1800 ;423 ;FontSize=7;
FontBold=Yes;
// Adding the following lines.
SourceExpr=ItemCostAmtExpectedTotal }
{ 1040069;TextBox ;7350 ;423 ;1550 ;423 ;FontSize=7;
FontBold=Yes;
CaptionML=ENU=Rec. not invoiced;
SourceExpr=ItemCostAmtExpectedTotal - ValueCostAmtActualTotal;
// End of the added lines.
DataSetFieldName=Item_Ledger_Entry___Cost_Amount__Expected______Value_Entry___Cost_Amount__Actual___Control1040069 }
{ 1040070;TextBox ;15000;423 ;1500 ;423 ;FontSize=7;
FontBold=Yes;
...기존 코드 5
...ForeColor=65535;
SourceExpr=ItemInvoicedQtyTotal;
DataSetFieldName=ItemInvoicedQtyTotal }
// Delete the following lines.
{ 1040103;TextBox ;300 ;0 ;150 ;423 ;Name=ItemCostAmtExpectedTotal;
Visible=No;
ForeColor=65535;
SourceExpr=ItemCostAmtExpectedTotal;
DataSetFieldName=ItemCostAmtExpectedTotal }
// End of the deleted lines.
{ 1040104;TextBox ;0 ;0 ;150 ;423 ;Name=ItemReceivedQtyTotal;
Visible=No;
ForeColor=65535;
...대체 코드 5
...ForeColor=65535;
SourceExpr=ItemInvoicedQtyTotal;
DataSetFieldName=ItemInvoicedQtyTotal }
{ 1040104;TextBox ;0 ;0 ;150 ;423 ;Name=ItemReceivedQtyTotal;
Visible=No;
ForeColor=65535;
... -
재고 받은에서 데이터 항목 번호 2 섹션에 있는 코드를 변경 하지 송장 발부 된 보고서 (10540) 다음과 같습니다.
기존 코드 1...NoOfItems := NoOfItems + 1;
CurrReport.CREATETOTALS(Quantity,"Invoiced Quantity","Cost Amount (Expected)");
CurrReport.CREATETOTALS("Value Entry"."Cost Amount (Actual)","Value Entry"."Invoiced Quantity");
// Delete the following lines.
// GB1004.begin
ItemReceivedQty += Quantity;
ItemInvoicedQty += "Invoiced Quantity";
ItemCostAmtExpected += "Cost Amount (Expected)";
ItemReceivedQtyTotal += Quantity;
ItemInvoicedQtyTotal += "Invoiced Quantity";
ItemCostAmtExpectedTotal += "Cost Amount (Expected)";
// End of the deleted lines.
// GB1004.end
END;
...대체 코드 1
...NoOfItems := NoOfItems + 1;
CurrReport.CREATETOTALS(Quantity,"Invoiced Quantity","Cost Amount (Expected)");
CurrReport.CREATETOTALS("Value Entry"."Cost Amount (Actual)","Value Entry"."Invoiced Quantity");
// Add the following lines.
CALCFIELDS("Cost Amount (Actual)");
CALCFIELDS("Cost Amount (Expected)");
// GB1004.begin
ItemReceivedQty += Quantity;
ItemInvoicedQty += "Invoiced Quantity";
ItemCostAmtExpected += "Cost Amount (Expected)" + "Cost Amount (Actual)";
ItemReceivedQtyTotal += Quantity;
ItemInvoicedQtyTotal += "Invoiced Quantity";
ItemCostAmtExpectedTotal += "Cost Amount (Expected)" + "Cost Amount (Actual)";
// End of the added lines.
// GB1004.end
END;
...기존 코드 2
...{ 1040047;TextBox ;2100 ;0 ;1500 ;423 ;HorzAlign=Left;
SourceExpr="Source No.";
DataSetFieldName=Item_Ledger_Entry__Source_No__ }
// Delete the following line.
{ 1040030;TextBox ;13050;0 ;1800 ;423 ;SourceExpr="Cost Amount (Expected)";
// End of the deleted line.
DataSetFieldName=Item_Ledger_Entry__Cost_Amount__Expected__ }
}
}
...대체 코드 2
...{ 1040047;TextBox ;2100 ;0 ;1500 ;423 ;HorzAlign=Left;
SourceExpr="Source No.";
DataSetFieldName=Item_Ledger_Entry__Source_No__ }
// Add the following line.
{ 1040030;TextBox ;13050;0 ;1800 ;423 ;SourceExpr="Cost Amount (Expected)" + "Cost Amount (Actual)";
// End of the added line.
DataSetFieldName=Item_Ledger_Entry__Cost_Amount__Expected__ }
}
}
...기존 코드 3
...SourceExpr="Value Entry"."Invoiced Quantity";
DataSetFieldName=Item_Ledger_Entry__Item_Ledger_Entry___Invoiced_Quantity_ }
{ 1040076;TextBox ;13050;0 ;1800 ;423 ;FontBold=Yes;
// Delete the following line.
SourceExpr="Item Ledger Entry"."Cost Amount (Expected)";
// End of the deleted line.
DataSetFieldName=Item_Ledger_Entry__Item_Ledger_Entry___Cost_Amount__Expected__ }
{ 1040079;TextBox ;0 ;0 ;5400 ;423 ;FontBold=Yes;
SourceExpr=Text1040005 + ' ' + Item."No.";
...대체 코드 3
...SourceExpr="Value Entry"."Invoiced Quantity";
DataSetFieldName=Item_Ledger_Entry__Item_Ledger_Entry___Invoiced_Quantity_ }
{ 1040076;TextBox ;13050;0 ;1800 ;423 ;FontBold=Yes;
// Add the following line.
SourceExpr=ItemCostAmtExpected;
// End of the added line.
DataSetFieldName=Item_Ledger_Entry__Item_Ledger_Entry___Cost_Amount__Expected__ }
{ 1040079;TextBox ;0 ;0 ;5400 ;423 ;FontBold=Yes;
SourceExpr=Text1040005 + ' ' + Item."No.";
...기존 코드 4
...DataSetFieldName=Item_Ledger_Entry__Quantity____Item_Ledger_Entry___Invoiced_Quantity__Control1040080 }
{ 1040081;TextBox ;7350 ;0 ;1550 ;423 ;FontBold=Yes;
CaptionML=ENU=Cost;
// Delete the following line.
SourceExpr="Item Ledger Entry"."Cost Amount (Expected)" - "Value Entry"."Cost Amount (Actual)";
// End of the deleted line.
DataSetFieldName=Item_Ledger_Entry___Cost_Amount__Expected______Value_Entry___Cost_Amount__Actual___Control1040081 }
{ 1040078;TextBox ;18000;0 ;150 ;423 ;Name=NoOfItems;
Visible=No;
...대체 코드 4
...DataSetFieldName=Item_Ledger_Entry__Quantity____Item_Ledger_Entry___Invoiced_Quantity__Control1040080 }
{ 1040081;TextBox ;7350 ;0 ;1550 ;423 ;FontBold=Yes;
CaptionML=ENU=Cost;
// Add the following line.
SourceExpr=ItemCostAmtExpected - ValueCostAmtActual;
// End of the added line.
DataSetFieldName=Item_Ledger_Entry___Cost_Amount__Expected______Value_Entry___Cost_Amount__Actual___Control1040081 }
{ 1040078;TextBox ;18000;0 ;150 ;423 ;Name=NoOfItems;
Visible=No;
... -
재고 받은에서 데이터 항목 번호 3 섹션의 코드를 변경 하지 송장 발부 된 보고서 (10540) 다음과 같습니다.
기존 코드 1...OnPreDataItem=BEGIN
IF EndDate <> 0D THEN
SETRANGE("Posting Date",0D,EndDate);
// Delete the following line.
SETFILTER("Invoiced Quantity",'<>%1',0);
CurrReport.CREATETOTALS("Cost Amount (Actual)","Invoiced Quantity");
// End of the deleted line.
END;
OnAfterGetRecord=BEGIN
...대체 코드 1
...OnPreDataItem=BEGIN
IF EndDate <> 0D THEN
SETRANGE("Posting Date",0D,EndDate);
// Add the following lines.
CurrReport.CREATETOTALS("Cost Amount (Actual)","Invoiced Quantity");
LastDocumentNo := '';
// End of the added lines.
END;
OnAfterGetRecord=BEGIN
...기존 코드 2
...ValueInvoicedQty += "Invoiced Quantity";
ValueCostAmtActualTotal += "Cost Amount (Actual)";
ValueInvoicedQtyTotal += "Invoiced Quantity";
// GB1004.end
END;
...대체 코드 2
...ValueInvoicedQty += "Invoiced Quantity";
ValueCostAmtActualTotal += "Cost Amount (Actual)";
ValueInvoicedQtyTotal += "Invoiced Quantity";
// Add the following line.
CalcSumDocumentNo("Value Entry");
// End of the added line.
// GB1004.end
END;
...기존 코드 3
...SectionWidth=18150;
SectionHeight=423;
OnPreSection=BEGIN
// Delete the following line.
CurrReport.SHOWOUTPUT(PrintDetails);
// End of the deleted line.
END;
}
...대체 코드 3
...SectionWidth=18150;
SectionHeight=423;
OnPreSection=BEGIN
// Add the following line.
CurrReport.SHOWOUTPUT(PrintDetails AND ("Invoiced Quantity" <> 0));
// End of the added line.
END;
}
... -
재고 받은 전역 변수의 코드를 변경 하지 송장 발부 된 보고서 (10540) 다음과 같습니다.
기존 코드...</TableCell>
</TableCells>
<Visibility>
// Delete the following line.
<Hidden>=iif (Fields!PrintDetails.Value and Fields!Value_Entry_Entry_No_.Value > 0,FALSE,TRUE)</Hidden>
// End of the deleted line.
</Visibility>
</TableRow>
</TableRows>
...대체 코드
...</TableCell>
</TableCells>
<Visibility>
// Adding the following line.
<Hidden>=iif (Fields!PrintDetails.Value and Fields!Value_Entry_Entry_No_.Value and Fields!Value_Entry__Invoiced_Quantity_.Value <> 0,FALSE,TRUE)</Hidden>
// End of the added line.
</Visibility>
</TableRow>
</TableRows>
... -
재고 운송에서 데이터 항목 번호 1 섹션의 코드를 변경 하지 송장 발부 된 보고서 (10541) 다음과 같습니다.
기존 코드 1...VertAlign=Bottom;
FontBold=Yes;
MultiLine=Yes;
DataSetFieldName=Value_Entry__Cost_Amount__Actual__Caption }
{ 1040026;Label ;15000;846 ;1500 ;846 ;ParentControl=1040025;
HorzAlign=Right;
...대체 코드 1
...VertAlign=Bottom;
FontBold=Yes;
MultiLine=Yes;
// Add the following line.
CaptionML=ENU=Cost Amount (Actual);
// End of the added line.
DataSetFieldName=Value_Entry__Cost_Amount__Actual__Caption }
{ 1040026;Label ;15000;846 ;1500 ;846 ;ParentControl=1040025;
HorzAlign=Right;
...기존 코드 2
...VertAlign=Bottom;
FontBold=Yes;
MultiLine=Yes;
DataSetFieldName=Item_Ledger_Entry__Cost_Amount__Expected__Caption }
{ 1040042;Label ;5700 ;0 ;1550 ;846 ;ParentControl=1040040;
VertAlign=Bottom;
...대체 코드 2
...VertAlign=Bottom;
FontBold=Yes;
MultiLine=Yes;
// Add the following line.
CaptionML=ENU=Cost Amount (Expected);
// End of the added line.
DataSetFieldName=Item_Ledger_Entry__Cost_Amount__Expected__Caption }
{ 1040042;Label ;5700 ;0 ;1550 ;846 ;ParentControl=1040040;
VertAlign=Bottom;
...기존 코드 3
...SourceExpr=Text1040005 + ' ' + Item."No.";
DataSetFieldName=Text1040005_________Item__No__ }
{ 1040054;TextBox ;16650;0 ;1500 ;423 ;FontBold=Yes;
// Delete the following line.
SourceExpr="Value Entry"."Cost Amount (Actual)";
// End of the deleted line.
DataSetFieldName=Value_Entry___Cost_Amount__Actual__ }
{ 1040059;TextBox ;7350 ;0 ;1550 ;423 ;FontBold=Yes;
CaptionML=ENU=Rec. not invoiced;
...대체 코드 3
...SourceExpr=Text1040005 + ' ' + Item."No.";
DataSetFieldName=Text1040005_________Item__No__ }
{ 1040054;TextBox ;16650;0 ;1500 ;423 ;FontBold=Yes;
// Add the following line.
SourceExpr=-"Value Entry"."Cost Amount (Actual)";
// End of the added line.
DataSetFieldName=Value_Entry___Cost_Amount__Actual__ }
{ 1040059;TextBox ;7350 ;0 ;1550 ;423 ;FontBold=Yes;
CaptionML=ENU=Rec. not invoiced;
...기존 코드 4
...DataSetFieldName=Value_Entry___Invoiced_Quantity__Control1040070 }
{ 1040071;TextBox ;16650;423 ;1500 ;423 ;FontSize=7;
FontBold=Yes;
// Delete the following line.
SourceExpr="Value Entry"."Cost Amount (Actual)";
// End of the deleted line.
DataSetFieldName=Value_Entry___Cost_Amount__Actual___Control1040071 }
{ 1040072;Label ;0 ;423 ;5550 ;423 ;FontSize=9;
FontBold=Yes;
...대체 코드 4
...DataSetFieldName=Value_Entry___Invoiced_Quantity__Control1040070 }
{ 1040071;TextBox ;16650;423 ;1500 ;423 ;FontSize=7;
FontBold=Yes;
// Add the following line.
SourceExpr=-"Value Entry"."Cost Amount (Actual)";
// End of the added line.
DataSetFieldName=Value_Entry___Cost_Amount__Actual___Control1040071 }
{ 1040072;Label ;0 ;423 ;5550 ;423 ;FontSize=9;
FontBold=Yes;
... -
재고 운송에서 데이터 항목 번호 2의 코드를 변경 하지 송장 발부 된 보고서 (10541) 다음과 같습니다.
기존 코드 1...OnAfterGetRecord=BEGIN
NoOfItems := NoOfItems + 1;
CurrReport.CREATETOTALS("Value Entry"."Cost Amount (Actual)","Value Entry"."Invoiced Quantity");
// Delete the following lines.
ItemCostAmount += "Cost Amount (Expected)";
ItemShippedQty += -Quantity;
ItemInvoicedQty += -"Invoiced Quantity";
ItemCostAmtExpected += "Cost Amount (Expected)";
ItemCostAmountTotal += "Cost Amount (Expected)";
ItemShippedQtyTotal += -Quantity;
ItemInvoicedQtyTotal += -"Invoiced Quantity";
ItemCostAmtExpectedTotal += "Cost Amount (Expected)";
// End of the deleted lines.
END;
DataItemLink=Item No.=FIELD(No.);
...대체 코드 1
...OnAfterGetRecord=BEGIN
NoOfItems := NoOfItems + 1;
CurrReport.CREATETOTALS("Value Entry"."Cost Amount (Actual)","Value Entry"."Invoiced Quantity");
// Add the following lines.
CALCFIELDS("Cost Amount (Actual)");
CALCFIELDS("Cost Amount (Expected)");
ItemCostAmount -= ("Cost Amount (Expected)" + "Cost Amount (Actual)");
ItemShippedQty -= Quantity;
ItemInvoicedQty -= "Invoiced Quantity";
ItemCostAmtExpected -= ("Cost Amount (Expected)" + "Cost Amount (Actual)");
ItemCostAmountTotal -= ("Cost Amount (Expected)" + "Cost Amount (Actual)");
ItemShippedQtyTotal -= Quantity;
ItemInvoicedQtyTotal -= "Invoiced Quantity";
ItemCostAmtExpectedTotal -= ("Cost Amount (Expected)" + "Cost Amount (Actual)");
// End of the added lines.
END;
DataItemLink=Item No.=FIELD(No.);
...기존 코드 2
...{ 1040047;TextBox ;2100 ;0 ;1500 ;423 ;HorzAlign=Left;
SourceExpr="Source No.";
DataSetFieldName=Item_Ledger_Entry__Source_No__ }
// Delete the following line.
{ 1040030;TextBox ;13050;0 ;1800 ;423 ;SourceExpr="Cost Amount (Expected)";
// End of the deleted line.
DataSetFieldName=Item_Ledger_Entry__Cost_Amount__Expected__ }
{ 1040082;TextBox ;18000;0 ;150 ;423 ;Name="Entry No.";
Visible=No;
...대체 코드 2
...{ 1040047;TextBox ;2100 ;0 ;1500 ;423 ;HorzAlign=Left;
SourceExpr="Source No.";
DataSetFieldName=Item_Ledger_Entry__Source_No__ }
// Add the following line.
{ 1040030;TextBox ;13050;0 ;1800 ;423 ;SourceExpr=-("Cost Amount (Expected)" + "Cost Amount (Actual)");
// End of the added line.
DataSetFieldName=Item_Ledger_Entry__Cost_Amount__Expected__ }
{ 1040082;TextBox ;18000;0 ;150 ;423 ;Name="Entry No.";
Visible=No;
... -
재고 운송에서 데이터 항목 번호 3의 코드를 변경 하지 송장 발부 된 보고서 (10541) 다음과 같습니다.
기존 코드 1...OnPreDataItem=BEGIN
IF EndDate <> 0D THEN
SETRANGE("Posting Date",0D,EndDate);
// Delete the following lines.
SETFILTER("Invoiced Quantity",'<>%1',0);
CurrReport.CREATETOTALS("Cost Amount (Actual)","Invoiced Quantity");
END;
OnAfterGetRecord=BEGIN
ValueInvoicedQty += -"Invoiced Quantity";
ValueCostAmtActual += "Cost Amount (Actual)";
ValueInvoicedQtyTotal += -"Invoiced Quantity";
ValueCostAmtActualTotal += "Cost Amount (Actual)";
// End of the deleted lines.
END;
DataItemLink=Item Ledger Entry No.=FIELD(Entry No.);
...대체 코드 1
...OnPreDataItem=BEGIN
IF EndDate <> 0D THEN
SETRANGE("Posting Date",0D,EndDate);
// Add the following lines.
CurrReport.CREATETOTALS("Cost Amount (Actual)","Invoiced Quantity");
LastDocumentNo := '';
END;
OnAfterGetRecord=BEGIN
ValueInvoicedQty -= "Invoiced Quantity";
ValueCostAmtActual -= "Cost Amount (Actual)";
ValueInvoicedQtyTotal -= "Invoiced Quantity";
ValueCostAmtActualTotal -= "Cost Amount (Actual)";
CalcSumDocumentNo("Value Entry");
// End of the added lines.
END;
DataItemLink=Item Ledger Entry No.=FIELD(Entry No.);
...기존 코드 3
...SectionWidth=18150;
SectionHeight=423;
OnPreSection=BEGIN
// Delete the following line.
CurrReport.SHOWOUTPUT(PrintDetails);
// End of the deleted line.
END;
}
...대체 코드 3
...SectionWidth=18150;
SectionHeight=423;
OnPreSection=BEGIN
// Add the following line.
CurrReport.SHOWOUTPUT(PrintDetails AND ("Invoiced Quantity" <> 0));
// End of the added line.
END;
}
...기존 코드 4
...{ 1040025;TextBox ;15000;0 ;1500 ;423 ;CaptionML=ENU=Invoiced Quantity;
SourceExpr=-"Invoiced Quantity";
DataSetFieldName=Value_Entry__Invoiced_Quantity_ }
// Delete the following line.
{ 1040027;TextBox ;16650;0 ;1500 ;423 ;SourceExpr="Cost Amount (Actual)";
// End of the deleted line.
DataSetFieldName=Value_Entry__Cost_Amount__Actual__ }
}
}
...대체 코드 4
...{ 1040025;TextBox ;15000;0 ;1500 ;423 ;CaptionML=ENU=Invoiced Quantity;
SourceExpr=-"Invoiced Quantity";
DataSetFieldName=Value_Entry__Invoiced_Quantity_ }
// Add the following line.
{ 1040027;TextBox ;16650;0 ;1500 ;423 ;SourceExpr=-"Cost Amount (Actual)";
// End of the added line.
DataSetFieldName=Value_Entry__Cost_Amount__Actual__ }
}
}
... -
재고 운송에서 데이터 항목 번호 4의 코드를 변경 하지 송장 발부 된 보고서 (10541) 다음과 같습니다.
기존 코드...SourceExpr=-"Value Entry"."Invoiced Quantity";
DataSetFieldName=Value_Entry___Invoiced_Quantity__Control1040036 }
{ 1040044;TextBox ;16650;0 ;1500 ;423 ;FontBold=Yes;
// Delete the following line.
SourceExpr="Value Entry"."Cost Amount (Actual)";
// End of the deleted line.
DataSetFieldName=Value_Entry___Cost_Amount__Actual___Control1040044 }
{ 1040029;TextBox ;0 ;0 ;5400 ;423 ;FontBold=Yes;
SourceExpr=Text1040005 + ' ' + Item."No.";
...대체 코드
...SourceExpr=-"Value Entry"."Invoiced Quantity";
DataSetFieldName=Value_Entry___Invoiced_Quantity__Control1040036 }
{ 1040044;TextBox ;16650;0 ;1500 ;423 ;FontBold=Yes;
// Add the following line.
SourceExpr=-"Value Entry"."Cost Amount (Actual)";
// End of the added line.
DataSetFieldName=Value_Entry___Cost_Amount__Actual___Control1040044 }
{ 1040029;TextBox ;0 ;0 ;5400 ;423 ;FontBold=Yes;
SourceExpr=Text1040005 + ' ' + Item."No.";
... -
전역 변수에서 제공 하는 스톡의 코드를 변경 하지 송장 발부 된 보고서 (10541) 다음과 같습니다.
기존 코드 1...ItemCostAmtExpectedTotal@1040016 : Decimal;
ValueInvoicedQtyTotal@1040019 : Decimal;
ValueCostAmtActualTotal@1040020 : Decimal;
BEGIN
{
...대체 코드 1
...ItemCostAmtExpectedTotal@1040016 : Decimal;
ValueInvoicedQtyTotal@1040019 : Decimal;
ValueCostAmtActualTotal@1040020 : Decimal;
// Add the following lines.
LastDocumentNo@1040023 : Code[20];
LOCAL PROCEDURE CalcSumDocumentNo@1040000(VAR ValueEntry@1040000 : Record 5802);
VAR
ValueEntry1@1040001 : Record 5802;
ValueCostAmtActualPer@1040002 : Decimal;
ValueIncoicedQtyPer@1040003 : Decimal;
BEGIN
IF LastDocumentNo = ValueEntry."Document No." THEN BEGIN
ValueEntry."Cost Amount (Actual)" := 0;
ValueEntry."Invoiced Quantity" := 0;
END ELSE BEGIN
WITH ValueEntry1 DO BEGIN
COPYFILTERS(ValueEntry);
SETRANGE("Document No.",ValueEntry."Document No.");
IF FINDSET THEN
REPEAT
ValueCostAmtActualPer += "Cost Amount (Actual)";
ValueIncoicedQtyPer += "Invoiced Quantity";
UNTIL NEXT = 0;
END;
ValueEntry."Cost Amount (Actual)" := ValueCostAmtActualPer;
ValueEntry."Invoiced Quantity" := ValueIncoicedQtyPer;
LastDocumentNo := ValueEntry."Document No.";
END;
END;
// End of the added lines.
BEGIN
{
...기존 코드 2
...</TableCell>
</TableCells>
<Visibility>
// Delete the following line.
<Hidden>=IIF(First(Fields!PrintDetails.Value) And (Fields!Value_Entry__Document_No__.Value<>""),False,True)</Hidden>
// End of the deleted line.
</Visibility>
</TableRow>
</TableRows>
...대체 코드 2
...</TableCell>
</TableCells>
<Visibility>
// Add the following line.
<Hidden>=IIF(First(Fields!PrintDetails.Value) And (Fields!Value_Entry__Document_No__.Value<>"") And (Fields!Value_Entry__Invoiced_Quantity_.Value <>0),False,True)</Hidden>
// End of the added line.
</Visibility>
</TableRow>
</TableRows>
...
전제 조건
S p 1이이 핫픽스를 적용 하려면 설치 또는 Microsoft Dynamics 탐색 2009 r 2의 영국 지역화를 있어야 합니다.
제거 정보
이 핫픽스를 제거할 수 없습니다.
상태
Microsoft는 이 문제가 '적용 대상' 섹션에 나열된 Microsoft 제품의 문제임을 확인했습니다.
참고: 이 문서는 Microsoft 지원 부서 내에서 직접 작성한 "빠른 게시" 문서입니다. 여기에 포함된 정보는 신흥 문제에 대한 응답으로 제공되었습니다. 신속히 사용할 수 있도록 작성되었으므로, 자료 입력 오류가 포함될 수 있으며 언제든지 예고없이 개정될 수 있습니다. 다른 고려 사항은 사용 약관을참조 하십시오.