Atlaide par preces izmaksas, kas tiek piešķirti pārdošanas sūtījumu nav tiek izplatīti saskaņā ar attiecīgo vērtību ierakstu Microsoft Dynamics NAV 2009 atlasītās izvēles. Izpildiet darbības sadaļā koda izmaiņas , lai atrisinātu šo problēmu. Šī problēma rodas ar šādiem produktiem:
-
Microsoft Dynamics NAV 2009 R2
-
Microsoft Dynamics NAV 2009. gada 1. servisa pakotne (SP1)
Risinājums
Informācija par labojumfailu
Pašlaik korporācija Microsoft piedāvā atbalstītu labojumfailu. Tomēr tas ir paredzēts tikai šajā rakstā aprakstītās problēmas novēršanai. Izmantojiet to tikai tām sistēmām, kurām ir radusies tieši šī problēma. Iespējams, tiks veikta šī labojumfaila papildu testēšana. Tādēļ, ja jums ir šī problēma nerada nopietnus traucējumus, ieteicams nogaidīt, līdz tiks izlaista nākamā servisa pakotne Microsoft Dynamics NAV 2009 vai nākamo Microsoft Dynamics NAV versiju, kurā ir iekļauts šis labojumfails.
Piezīme. Īpašos gadījumos standarta izmaksas par atbalsta zvaniem nav jāsedz, ja ar tehniskā atbalsta speciālistu programmai Microsoft Dynamics un saistītiem produktiem nosaka, ka šo problēmu novērsīs noteikts atjauninājums. Parasti atbalsta izmaksas tiek piemērotas jautājumiem par papildu atbalstu un problēmām, kas neskar specifisko atjauninājumu apspriešanu.
Informācija par instalēšanu
Microsoft piedāvā programmēšanas piemērus tikai uzskatāmībai, nesniedzot nekādas tiešas vai netiešas garantijas. Tas ietver, bet neaprobežojas ar netiešām garantijām par piemērotību pārdošanai vai atbilstību noteiktam mērķim. Šajā rakstā tiek pieņemts, ka pārzināt programmēšanas valodu, kas tiek aprakstīta, un rīkus, kas tiek izmantoti, lai izveidotu un atkļūdotu procedūras. Microsoft atbalsta inženieri var palīdzēt izskaidrot kādas noteiktas procedūras funkcionalitāti. Taču viņi nemainīs šos piemērus, lai sniegtu skaidrākus, un neveidos jaunas procedūras, kas atbilstu īpašām prasībām.
Piezīme. Pirms šī labojumfaila instalēšanas pārliecinieties, vai ka visi Microsoft Dynamics NAV klienta lietotāji ir atteikušies sistēmu. Tas ietver Microsoft Dynamics NAV lietojumprogrammu serveris (NAS) pakalpojumi. Jums ir jābūt tikai klienta lietotājam, kurš ir pieteicies datorā, kad izmantojat šo labojumfailu.
Lai ieviestu šo labojumfailu, datorā jābūt instalētai izstrādātāja licenci.
Ieteicams, ka lietotāja konts tiek atvērts logs Windows lietotājvārdi vai logā datu bāzes lietotājvārdi piešķirt "SUPER" lomas ID. Ja lietotāja kontam nevar piešķirt "SUPER" lomas ID, ir jāpārbauda lietotāja konts ir šādas atļaujas:
-
Modificēt atļaujas objektu, kad tiks mainīts.
-
Izpildes atļauja objekta objekta ID 5210 sistēmas un sistēmas objekta ID 9015
objektu.
Piezīme. Jums nav tiesības datu krātuvju vien lai veiktu datu labošanu.
Koda izmaiņas
Piezīme. Vienmēr pārbaudes kods novērš kontrolētā vidē pirms lietojat datoru ražošanas labojumus.
Lai novērstu šo problēmu, rīkojieties šādi:
-
Nomainiet šo kodu rekvizītos pārdošanas ziņu koda (80), šādi:
Kods 1...PostJobContractLine(JobTaskSalesLine,TempJnlLineDim2);
END;
SalesLine.Type::"Charge (Item)":
IF Invoice OR ItemChargeAssgntOnly THEN BEGIN
// Delete the following line.
ItemJnlRollRndg := FALSE;
// End of the deleted line.
ClearItemChargeAssgntFilter;
TempItemChargeAssgntSales.SETCURRENTKEY("Applies-to Doc. Type");
TempItemChargeAssgntSales.SETRANGE("Document Line No.",SalesLine."Line No.");
IF TempItemChargeAssgntSales.FINDSET THEN
...Aizstāšanas kods = 1
...PostJobContractLine(JobTaskSalesLine,TempJnlLineDim2);
END;
SalesLine.Type::"Charge (Item)":
IF Invoice OR ItemChargeAssgntOnly THEN BEGIN
// Add the following line.
ItemJnlRollRndg := TRUE;
// End of the added line.
ClearItemChargeAssgntFilter;
TempItemChargeAssgntSales.SETCURRENTKEY("Applies-to Doc. Type");
TempItemChargeAssgntSales.SETRANGE("Document Line No.",SalesLine."Line No.");
IF TempItemChargeAssgntSales.FINDSET THEN
...Kods 2.
...GenJnlLineDocNo := TempItemChargeAssgntSales."Applies-to Doc. No.";
CASE TempItemChargeAssgntSales."Applies-to Doc. Type" OF
TempItemChargeAssgntSales."Applies-to Doc. Type"::Shipment:
BEGIN
// Delete the following line.
PostItemChargePerShpt(SalesLine);
TempItemChargeAssgntSales.MARK(TRUE);
END;
TempItemChargeAssgntSales."Applies-to Doc. Type"::"Return Receipt":
BEGIN
...Aizstāšanas kods 2.
...GenJnlLineDocNo := TempItemChargeAssgntSales."Applies-to Doc. No.";
CASE TempItemChargeAssgntSales."Applies-to Doc. Type" OF
TempItemChargeAssgntSales."Applies-to Doc. Type"::Shipment:
BEGIN
// Add the following lines.
PostItemChargePerShpt(SalesLine,SalesLine."Inv. Discount Amount",
SalesLine.Quantity,SalesLine."Line Discount Amount",SalesLine."Line Amount");
// End of the added lines.
TempItemChargeAssgntSales.MARK(TRUE);
END;
TempItemChargeAssgntSales."Applies-to Doc. Type"::"Return Receipt":
BEGIN
...Kods 3
...TempItemChargeAssgntSales.MARK(TRUE);
END;
TempItemChargeAssgntSales."Applies-to Doc. Type"::"Return Receipt":
BEGIN
// Delete the following line.
PostItemChargePerRetRcpt(SalesLine);
TempItemChargeAssgntSales.MARK(TRUE);
END;
TempItemChargeAssgntSales."Applies-to Doc. Type"::Order,
TempItemChargeAssgntSales."Applies-to Doc. Type"::Invoice:
...Aizstāšanas kodu 3.
...TempItemChargeAssgntSales.MARK(TRUE);
END;
TempItemChargeAssgntSales."Applies-to Doc. Type"::"Return Receipt":
BEGIN
// Add the following lines.
PostItemChargePerRetRcpt(SalesLine,SalesLine."Inv. Discount Amount",
SalesLine.Quantity,SalesLine."Line Discount Amount",SalesLine."Line Amount");
// End of the added lines.
TempItemChargeAssgntSales.MARK(TRUE);
END;
TempItemChargeAssgntSales."Applies-to Doc. Type"::Order,
TempItemChargeAssgntSales."Applies-to Doc. Type"::Invoice:
... -
Nomainiet šo kodu pārdošanas ziņu koda (80) PostItemChargePerShpt funkciju šādi:
Kods 1...END;
END;
END;
// Delete the following line.
LOCAL PROCEDURE PostItemChargePerShpt@5807(SalesLine@1000 : Record 37);
VAR
SalesShptLine@1003 : Record 111;
TempItemLedgEntry@1010 : TEMPORARY Record 32;
ItemTrackingMgt@1009 : Codeunit 6500;
...Aizstāšanas kods = 1
...END;
END;
END;
// Add the following line.
LOCAL PROCEDURE PostItemChargePerShpt@5807(SalesLine@1000 : Record 37;VAR TotalInvDiscAmtRemaining@1012 : Decimal;VAR TotalQtyRemaining@1013 : Decimal;VAR TotalLineDiscAmtRemaining@1014 : Decimal;VAR TotalLineAmtRemaining@1015 : Decimal);
VAR
SalesShptLine@1003 : Record 111;
TempItemLedgEntry@1010 : TEMPORARY Record 32;
ItemTrackingMgt@1009 : Codeunit 6500;
...Kods 2.
...AmountToAssign := ROUND(NonDistrAmountToAssign * Factor,GLSetup."Amount Rounding Precision");
IF Factor < 1 THEN BEGIN
PostItemCharge(SalesLine,
TempItemLedgEntry."Entry No.",ABS(TempItemLedgEntry.Quantity),
// Delete the following line.
AmountToAssign,QtyToAssign);
NonDistrQuantity := NonDistrQuantity - ABS(TempItemLedgEntry.Quantity);
NonDistrQtyToAssign := NonDistrQtyToAssign - QtyToAssign;
NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
...Aizstāšanas kods 2.
...AmountToAssign := ROUND(NonDistrAmountToAssign * Factor,GLSetup."Amount Rounding Precision");
IF Factor < 1 THEN BEGIN
PostItemCharge(SalesLine,
TempItemLedgEntry."Entry No.",ABS(TempItemLedgEntry.Quantity),
// Add the following lines.
AmountToAssign,QtyToAssign,TotalInvDiscAmtRemaining,
TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining);
// End of the added lines.
NonDistrQuantity := NonDistrQuantity - ABS(TempItemLedgEntry.Quantity);
NonDistrQtyToAssign := NonDistrQtyToAssign - QtyToAssign;
NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
...Kods 3
...NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
PostItemCharge(SalesLine,
TempItemLedgEntry."Entry No.",ABS(TempItemLedgEntry.Quantity),
// Delete the following line.
NonDistrAmountToAssign,NonDistrQtyToAssign);
UNTIL TempItemLedgEntry.NEXT = 0;
END ELSE
PostItemCharge(SalesLine,
SalesShptLine."Item Shpt. Entry No.",SalesShptLine."Quantity (Base)",
...Aizstāšanas kodu 3.
...NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
PostItemCharge(SalesLine,
TempItemLedgEntry."Entry No.",ABS(TempItemLedgEntry.Quantity),
// Add the following lines.
NonDistrAmountToAssign,NonDistrQtyToAssign,TotalInvDiscAmtRemaining,
TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining);
// End of the added lines.
UNTIL TempItemLedgEntry.NEXT = 0;
END ELSE
PostItemCharge(SalesLine,
SalesShptLine."Item Shpt. Entry No.",SalesShptLine."Quantity (Base)",
...Kods 4
...END ELSE
PostItemCharge(SalesLine,
SalesShptLine."Item Shpt. Entry No.",SalesShptLine."Quantity (Base)",
TempItemChargeAssgntSales."Amount to Assign",
// Delete the following lines.
TempItemChargeAssgntSales."Qty. to Assign");
END;
LOCAL PROCEDURE PostItemChargePerRetRcpt@5810(SalesLine@1000 : Record 37);
// End of the deleted lines.
VAR
ReturnRcptLine@1002 : Record 6661;
TempItemLedgEntry@1010 : TEMPORARY Record 32;
ItemTrackingMgt@1009 : Codeunit 6500;
...Aizstāšanas kodu 4
...END ELSE
PostItemCharge(SalesLine,
SalesShptLine."Item Shpt. Entry No.",SalesShptLine."Quantity (Base)",
TempItemChargeAssgntSales."Amount to Assign",
// Add the following lines.
TempItemChargeAssgntSales."Qty. to Assign",TotalInvDiscAmtRemaining,
TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining);
END;
LOCAL PROCEDURE PostItemChargePerRetRcpt@5810(SalesLine@1000 : Record 37;VAR TotalInvDiscAmtRemaining@1012 : Decimal;VAR TotalQtyRemaining@1013 : Decimal;VAR TotalLineDiscAmtRemaining@1014 : Decimal;VAR TotalLineAmtRemaining@1015 : Decimal);
// End of the added lines.
VAR
ReturnRcptLine@1002 : Record 6661;
TempItemLedgEntry@1010 : TEMPORARY Record 32;
ItemTrackingMgt@1009 : Codeunit 6500;
... -
Nomainiet šo kodu pārdošanas ziņu koda (80) PostItemChargePerRetRcpt funkciju šādi:
Kods 1...AmountToAssign := ROUND(NonDistrAmountToAssign * Factor,GLSetup."Amount Rounding Precision");
IF Factor < 1 THEN BEGIN
PostItemCharge(SalesLine,
TempItemLedgEntry."Entry No.",ABS(TempItemLedgEntry.Quantity),
// Delete the following line.
AmountToAssign,QtyToAssign);
NonDistrQuantity := NonDistrQuantity - ABS(TempItemLedgEntry.Quantity);
NonDistrQtyToAssign := NonDistrQtyToAssign - QtyToAssign;
NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
...Aizstāšanas kods = 1
...AmountToAssign := ROUND(NonDistrAmountToAssign * Factor,GLSetup."Amount Rounding Precision");
IF Factor < 1 THEN BEGIN
PostItemCharge(SalesLine,
TempItemLedgEntry."Entry No.",ABS(TempItemLedgEntry.Quantity),
// Add the following lines.
AmountToAssign,QtyToAssign,TotalInvDiscAmtRemaining,
TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining);
// End of the added lines.
NonDistrQuantity := NonDistrQuantity - ABS(TempItemLedgEntry.Quantity);
NonDistrQtyToAssign := NonDistrQtyToAssign - QtyToAssign;
NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
...Kods 2.
...NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
PostItemCharge(SalesLine,
TempItemLedgEntry."Entry No.",ABS(TempItemLedgEntry.Quantity),
// Delete the following line.
NonDistrAmountToAssign,NonDistrQtyToAssign);
UNTIL TempItemLedgEntry.NEXT = 0;
END ELSE
PostItemCharge(SalesLine,
ReturnRcptLine."Item Rcpt. Entry No.",ReturnRcptLine."Quantity (Base)",
...Aizstāšanas kods 2.
...NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
PostItemCharge(SalesLine,
TempItemLedgEntry."Entry No.",ABS(TempItemLedgEntry.Quantity),
// Add the following lines.
NonDistrAmountToAssign,NonDistrQtyToAssign,TotalInvDiscAmtRemaining,
TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining);
// End of the added lines.
UNTIL TempItemLedgEntry.NEXT = 0;
END ELSE
PostItemCharge(SalesLine,
ReturnRcptLine."Item Rcpt. Entry No.",ReturnRcptLine."Quantity (Base)",
...Kods 3
...END ELSE
PostItemCharge(SalesLine,
ReturnRcptLine."Item Rcpt. Entry No.",ReturnRcptLine."Quantity (Base)",
TempItemChargeAssgntSales."Amount to Assign",
// Delete the following line.
TempItemChargeAssgntSales."Qty. to Assign")
END;
LOCAL PROCEDURE PostAssocItemJnlLine@3(QtyToBeShipped@1000 : Decimal;QtyToBeShippedBase@1001 : Decimal) : Integer;
VAR
...Aizstāšanas kodu 3.
...END ELSE
PostItemCharge(SalesLine,
ReturnRcptLine."Item Rcpt. Entry No.",ReturnRcptLine."Quantity (Base)",
TempItemChargeAssgntSales."Amount to Assign",
// Add the following lines.
TempItemChargeAssgntSales."Qty. to Assign",TotalInvDiscAmtRemaining,
TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining)
// End of the added lines.
END;
LOCAL PROCEDURE PostAssocItemJnlLine@3(QtyToBeShipped@1000 : Decimal;QtyToBeShippedBase@1001 : Decimal) : Integer;
VAR
... -
Nomainiet šo kodu pārdošanas ziņu koda (80) PostItemCharge funkciju šādi:
Kods 1...TempValueEntryRelation.DELETEALL;
END;
END;
// Delete the following line.
PROCEDURE PostItemCharge@42(SalesLine@1005 : Record 37;ItemEntryNo@1004 : Integer;QuantityBase@1003 : Decimal;AmountToAssign@1002 : Decimal;QtyToAssign@1001 : Decimal);
VAR
DummyTrackingSpecification@1000 : Record 336;
BEGIN
WITH TempItemChargeAssgntSales DO BEGIN
...Aizstāšanas kods = 1
...TempValueEntryRelation.DELETEALL;
END;
END;
// Add the following line.
PROCEDURE PostItemCharge@42(SalesLine@1005 : Record 37;ItemEntryNo@1004 : Integer;QuantityBase@1003 : Decimal;AmountToAssign@1002 : Decimal;QtyToAssign@1001 : Decimal;VAR TotalInvDiscAmtRemaining@1006 : Decimal;VAR TotalQtyRemaining@1007 : Decimal;VAR TotalLineDiscAmtRemaining@1008 : Decimal;VAR TotalLineAmtRemaining@1009 : Decimal);
VAR
DummyTrackingSpecification@1000 : Record 336;
BEGIN
WITH TempItemChargeAssgntSales DO BEGIN
...Kods 2.
...SalesLine.Amount :=
CurrExchRate.ExchangeAmtFCYToLCY(
UseDate,SalesHeader."Currency Code",TotalChargeAmt,SalesHeader."Currency Factor");
SalesLine."Inv. Discount Amount" := ROUND(
// Delete the following lines.
SalesLine."Inv. Discount Amount" / SalesLine.Quantity * QtyToAssign,
GLSetup."Amount Rounding Precision");
// End of the deleted lines.
SalesLine.Amount := ROUND(SalesLine.Amount,GLSetup."Amount Rounding Precision") - TotalChargeAmtLCY;
IF SalesHeader."Currency Code" <> '' THEN
TotalChargeAmtLCY := TotalChargeAmtLCY + SalesLine.Amount;
SalesLine."Unit Cost (LCY)" := ROUND(
...Aizstāšanas kods 2.
...SalesLine.Amount :=
CurrExchRate.ExchangeAmtFCYToLCY(
UseDate,SalesHeader."Currency Code",TotalChargeAmt,SalesHeader."Currency Factor");
SalesLine."Inv. Discount Amount" := ROUND(
// Add the following lines.
TotalInvDiscAmtRemaining / TotalQtyRemaining * QtyToAssign,
GLSetup."Amount Rounding Precision");
SalesLine."Line Discount Amount" := ROUND(
TotalLineDiscAmtRemaining / TotalQtyRemaining * QtyToAssign,
GLSetup."Amount Rounding Precision");
SalesLine."Line Amount" := ROUND(
TotalLineAmtRemaining / TotalQtyRemaining * QtyToAssign,
GLSetup."Amount Rounding Precision");
TotalInvDiscAmtRemaining := TotalInvDiscAmtRemaining - SalesLine."Inv. Discount Amount";
TotalLineDiscAmtRemaining := TotalLineDiscAmtRemaining - SalesLine."Line Discount Amount";
TotalLineAmtRemaining := TotalLineAmtRemaining - SalesLine."Line Amount";
TotalQtyRemaining := TotalQtyRemaining - QtyToAssign;
// End of the added lines.
SalesLine.Amount := ROUND(SalesLine.Amount,GLSetup."Amount Rounding Precision") - TotalChargeAmtLCY;
IF SalesHeader."Currency Code" <> '' THEN
TotalChargeAmtLCY := TotalChargeAmtLCY + SalesLine.Amount;
SalesLine."Unit Cost (LCY)" := ROUND(
... -
Nomainiet šo kodu rekvizītos thePurch.-pēc koda (90) šādi:
Kods 1...3:
ERROR(Text015);
PurchLine.Type::"Charge (Item)":
IF Invoice OR ItemChargeAssgntOnly THEN BEGIN
// Delete the following line.
ItemJnlRollRndg := FALSE;
ClearItemChargeAssgntFilter;
TempItemChargeAssgntPurch.SETCURRENTKEY("Applies-to Doc. Type");
TempItemChargeAssgntPurch.SETRANGE("Document Line No.",PurchLine."Line No.");
IF TempItemChargeAssgntPurch.FINDSET THEN
...Aizstāšanas kods = 1
...3:
ERROR(Text015);
PurchLine.Type::"Charge (Item)":
IF Invoice OR ItemChargeAssgntOnly THEN BEGIN
// Add the following line.
ItemJnlRollRndg := TRUE;
ClearItemChargeAssgntFilter;
TempItemChargeAssgntPurch.SETCURRENTKEY("Applies-to Doc. Type");
TempItemChargeAssgntPurch.SETRANGE("Document Line No.",PurchLine."Line No.");
IF TempItemChargeAssgntPurch.FINDSET THEN
...Kods 2.
...GenJnlLineDocNo := TempItemChargeAssgntPurch."Applies-to Doc. No.";
CASE TempItemChargeAssgntPurch."Applies-to Doc. Type" OF
TempItemChargeAssgntPurch."Applies-to Doc. Type"::Receipt:
BEGIN
// Delete the following line.
PostItemChargePerRcpt(PurchLine);
TempItemChargeAssgntPurch.MARK(TRUE);
END;
TempItemChargeAssgntPurch."Applies-to Doc. Type"::"Transfer Receipt":
BEGIN
...Aizstāšanas kods 2.
...GenJnlLineDocNo := TempItemChargeAssgntPurch."Applies-to Doc. No.";
CASE TempItemChargeAssgntPurch."Applies-to Doc. Type" OF
TempItemChargeAssgntPurch."Applies-to Doc. Type"::Receipt:
BEGIN
// Add the following lines.
PostItemChargePerRcpt(PurchLine,PurchLine."Inv. Discount Amount",
PurchLine.Quantity,PurchLine."Line Discount Amount",PurchLine."Line Amount");
// End of the added lines.
TempItemChargeAssgntPurch.MARK(TRUE);
END;
TempItemChargeAssgntPurch."Applies-to Doc. Type"::"Transfer Receipt":
BEGIN
...Kods 3
...TempItemChargeAssgntPurch.MARK(TRUE);
END;
TempItemChargeAssgntPurch."Applies-to Doc. Type"::"Transfer Receipt":
BEGIN
// Delete the following line.
PostItemChargePerTransfer(PurchLine);
TempItemChargeAssgntPurch.MARK(TRUE);
END;
TempItemChargeAssgntPurch."Applies-to Doc. Type"::"Return Shipment":
BEGIN
...Aizstāšanas kodu 3.
...TempItemChargeAssgntPurch.MARK(TRUE);
END;
TempItemChargeAssgntPurch."Applies-to Doc. Type"::"Transfer Receipt":
BEGIN
// Add the following lines.
PostItemChargePerTransfer(PurchLine,PurchLine."Inv. Discount Amount",
PurchLine.Quantity,PurchLine."Line Discount Amount",PurchLine."Line Amount");
// End of the added lines.
TempItemChargeAssgntPurch.MARK(TRUE);
END;
TempItemChargeAssgntPurch."Applies-to Doc. Type"::"Return Shipment":
BEGIN
...Kods 4
...TempItemChargeAssgntPurch.MARK(TRUE);
END;
TempItemChargeAssgntPurch."Applies-to Doc. Type"::"Return Shipment":
BEGIN
// Delete the following line.
PostItemChargePerRetShpt(PurchLine);
TempItemChargeAssgntPurch.MARK(TRUE);
END;
TempItemChargeAssgntPurch."Applies-to Doc. Type"::"Sales Shipment":
BEGIN
...Aizstāšanas kodu 4
...TempItemChargeAssgntPurch.MARK(TRUE);
END;
TempItemChargeAssgntPurch."Applies-to Doc. Type"::"Return Shipment":
BEGIN
// Add the following lines.
PostItemChargePerRetShpt(PurchLine,PurchLine."Inv. Discount Amount",
PurchLine.Quantity,PurchLine."Line Discount Amount",PurchLine."Line Amount");
// End of the added lines.
TempItemChargeAssgntPurch.MARK(TRUE);
END;
TempItemChargeAssgntPurch."Applies-to Doc. Type"::"Sales Shipment":
BEGIN
...5 kods
...TempItemChargeAssgntPurch.MARK(TRUE);
END;
TempItemChargeAssgntPurch."Applies-to Doc. Type"::"Sales Shipment":
BEGIN
// Delete the following line.
PostItemChargePerSalesShpt(PurchLine);
TempItemChargeAssgntPurch.MARK(TRUE);
END;
TempItemChargeAssgntPurch."Applies-to Doc. Type"::"Return Receipt":
BEGIN
...Aizstāšanas kodu 5
...TempItemChargeAssgntPurch.MARK(TRUE);
END;
TempItemChargeAssgntPurch."Applies-to Doc. Type"::"Sales Shipment":
BEGIN
// Add the following lines.
PostItemChargePerSalesShpt(PurchLine,PurchLine."Inv. Discount Amount",
PurchLine.Quantity,PurchLine."Line Discount Amount",PurchLine."Line Amount");
// End of the added lines.
TempItemChargeAssgntPurch.MARK(TRUE);
END;
TempItemChargeAssgntPurch."Applies-to Doc. Type"::"Return Receipt":
BEGIN
...Kods 6
...TempItemChargeAssgntPurch.MARK(TRUE);
END;
TempItemChargeAssgntPurch."Applies-to Doc. Type"::"Return Receipt":
BEGIN
// Delete the following line.
PostItemChargePerRetRcpt(PurchLine);
TempItemChargeAssgntPurch.MARK(TRUE);
END;
TempItemChargeAssgntPurch."Applies-to Doc. Type"::Order,
TempItemChargeAssgntPurch."Applies-to Doc. Type"::Invoice:
...Aizstāšanas kodu 6
...TempItemChargeAssgntPurch.MARK(TRUE);
END;
TempItemChargeAssgntPurch."Applies-to Doc. Type"::"Return Receipt":
BEGIN
// Add the following lines.
PostItemChargePerRetRcpt(PurchLine,PurchLine."Inv. Discount Amount",
PurchLine.Quantity,PurchLine."Line Discount Amount",PurchLine."Line Amount");
// End of the added lines.
TempItemChargeAssgntPurch.MARK(TRUE);
END;
TempItemChargeAssgntPurch."Applies-to Doc. Type"::Order,
TempItemChargeAssgntPurch."Applies-to Doc. Type"::Invoice:
... -
Nomainiet šo kodu funkciju PostItemChargePerRcpt thePurch.-pēc koda (90) šādi:
Kods 1...END;
END;
END;
// Delete the following line.
LOCAL PROCEDURE PostItemChargePerRcpt@5807(PurchLine@1000 : Record 39);
VAR
PurchRcptLine@1002 : Record 121;
TempItemLedgEntry@1003 : TEMPORARY Record 32;
ItemTrackingMgt@1005 : Codeunit 6500;
...Aizstāšanas kods = 1
...END;
END;
END;
// Add the following line.
LOCAL PROCEDURE PostItemChargePerRcpt@5807(PurchLine@1000 : Record 39;VAR TotalInvDiscAmtRemaining@1012 : Decimal;VAR TotalQtyRemaining@1013 : Decimal;VAR TotalLineDiscAmtRemaining@1014 : Decimal;VAR TotalLineAmtRemaining@1015 : Decimal);
VAR
PurchRcptLine@1002 : Record 121;
TempItemLedgEntry@1003 : TEMPORARY Record 32;
ItemTrackingMgt@1005 : Codeunit 6500;
...Kods 2.
...AmountToAssign := ROUND(NonDistrAmountToAssign * Factor,GLSetup."Amount Rounding Precision");
IF Factor < 1 THEN BEGIN
PostItemCharge(PurchLine,
TempItemLedgEntry."Entry No.",TempItemLedgEntry.Quantity,
// Delete the following line.
AmountToAssign * Sign,QtyToAssign,PurchRcptLine."Indirect Cost %");
NonDistrQuantity := NonDistrQuantity - TempItemLedgEntry.Quantity;
NonDistrQtyToAssign := NonDistrQtyToAssign - QtyToAssign;
NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
...Aizstāšanas kods 2.
...AmountToAssign := ROUND(NonDistrAmountToAssign * Factor,GLSetup."Amount Rounding Precision");
IF Factor < 1 THEN BEGIN
PostItemCharge(PurchLine,
TempItemLedgEntry."Entry No.",TempItemLedgEntry.Quantity,
// Add the following lines.
AmountToAssign * Sign,QtyToAssign,PurchRcptLine."Indirect Cost %",
TotalInvDiscAmtRemaining,TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining);
// End of the added lines.
NonDistrQuantity := NonDistrQuantity - TempItemLedgEntry.Quantity;
NonDistrQtyToAssign := NonDistrQtyToAssign - QtyToAssign;
NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
...Kods 3
...NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
PostItemCharge(PurchLine,
TempItemLedgEntry."Entry No.",TempItemLedgEntry.Quantity,
// Delete the following line.
NonDistrAmountToAssign * Sign,NonDistrQtyToAssign,PurchRcptLine."Indirect Cost %");
UNTIL TempItemLedgEntry.NEXT = 0;
END ELSE
ERROR(Text042)
ELSE
...Aizstāšanas kodu 3.
...NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
PostItemCharge(PurchLine,
TempItemLedgEntry."Entry No.",TempItemLedgEntry.Quantity,
// Add the following lines.
NonDistrAmountToAssign * Sign,NonDistrQtyToAssign,PurchRcptLine."Indirect Cost %",
TotalInvDiscAmtRemaining,TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining);
// End of the added lines.
UNTIL TempItemLedgEntry.NEXT = 0;
END ELSE
ERROR(Text042)
ELSE
...Kods 4
...PostItemCharge(PurchLine,
PurchRcptLine."Item Rcpt. Entry No.",PurchRcptLine."Quantity (Base)",
TempItemChargeAssgntPurch."Amount to Assign" * Sign,
TempItemChargeAssgntPurch."Qty. to Assign",
// Delete the following lines.
PurchRcptLine."Indirect Cost %");
END;
LOCAL PROCEDURE PostItemChargePerRetShpt@5811(PurchLine@1000 : Record 39);
// End of the deleted lines.
VAR
ReturnShptLine@1002 : Record 6651;
TempItemLedgEntry@1010 : TEMPORARY Record 32;
ItemTrackingMgt@1009 : Codeunit 6500;
...Aizstāšanas kodu 4
...PostItemCharge(PurchLine,
PurchRcptLine."Item Rcpt. Entry No.",PurchRcptLine."Quantity (Base)",
TempItemChargeAssgntPurch."Amount to Assign" * Sign,
TempItemChargeAssgntPurch."Qty. to Assign",
// Add the following lines.
PurchRcptLine."Indirect Cost %",TotalInvDiscAmtRemaining,
TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining);
END;
LOCAL PROCEDURE PostItemChargePerRetShpt@5811(PurchLine@1000 : Record 39;VAR TotalInvDiscAmtRemaining@1012 : Decimal;VAR TotalQtyRemaining@1013 : Decimal;VAR TotalLineDiscAmtRemaining@1014 : Decimal;VAR TotalLineAmtRemaining@1015 : Decimal);
// End of the added lines.
VAR
ReturnShptLine@1002 : Record 6651;
TempItemLedgEntry@1010 : TEMPORARY Record 32;
ItemTrackingMgt@1009 : Codeunit 6500;
... -
Nomainiet šo kodu funkciju PostItemChargePerRetShpt thePurch.-pēc koda (90) šādi:
Kods 1...AmountToAssign := ROUND(NonDistrAmountToAssign * Factor,GLSetup."Amount Rounding Precision");
IF Factor < 1 THEN BEGIN
PostItemCharge(PurchLine,
TempItemLedgEntry."Entry No.",TempItemLedgEntry.Quantity,
// Delete the following line.
AmountToAssign * Sign,QtyToAssign,ReturnShptLine."Indirect Cost %");
NonDistrQuantity := NonDistrQuantity - TempItemLedgEntry.Quantity;
NonDistrQtyToAssign := NonDistrQtyToAssign - QtyToAssign;
NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
...Aizstāšanas kods = 1
...AmountToAssign := ROUND(NonDistrAmountToAssign * Factor,GLSetup."Amount Rounding Precision");
IF Factor < 1 THEN BEGIN
PostItemCharge(PurchLine,
TempItemLedgEntry."Entry No.",TempItemLedgEntry.Quantity,
// Add the following lines.
AmountToAssign * Sign,QtyToAssign,ReturnShptLine."Indirect Cost %",TotalInvDiscAmtRemaining,
TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining);
// End of the added lines.
NonDistrQuantity := NonDistrQuantity - TempItemLedgEntry.Quantity;
NonDistrQtyToAssign := NonDistrQtyToAssign - QtyToAssign;
NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
...Kods 2.
...NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
PostItemCharge(PurchLine,
TempItemLedgEntry."Entry No.",TempItemLedgEntry.Quantity,
// Delete the following line.
NonDistrAmountToAssign * Sign,NonDistrQtyToAssign,ReturnShptLine."Indirect Cost %");
UNTIL TempItemLedgEntry.NEXT = 0;
END ELSE
ERROR(Text042)
ELSE
...Aizstāšanas kods 2.
...NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
PostItemCharge(PurchLine,
TempItemLedgEntry."Entry No.",TempItemLedgEntry.Quantity,
// Add the following lines.
NonDistrAmountToAssign * Sign,NonDistrQtyToAssign,ReturnShptLine."Indirect Cost %",TotalInvDiscAmtRemaining,
TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining);
// End of the added lines.
UNTIL TempItemLedgEntry.NEXT = 0;
END ELSE
ERROR(Text042)
ELSE
...Kods 3
...PostItemCharge(PurchLine,
ReturnShptLine."Item Shpt. Entry No.",-ReturnShptLine."Quantity (Base)",
ABS(TempItemChargeAssgntPurch."Amount to Assign") * Sign,
TempItemChargeAssgntPurch."Qty. to Assign",
// Delete the following lines.
ReturnShptLine."Indirect Cost %");
END;
LOCAL PROCEDURE PostItemChargePerTransfer@23(PurchLine@1000 : Record 39);
// End of the deleted lines.
VAR
TransRcptLine@1002 : Record 5747;
ItemApplnEntry@1003 : Record 339;
DummyTrackingSpecification@1001 : Record 336;
...Aizstāšanas kodu 3.
...PostItemCharge(PurchLine,
ReturnShptLine."Item Shpt. Entry No.",-ReturnShptLine."Quantity (Base)",
ABS(TempItemChargeAssgntPurch."Amount to Assign") * Sign,
TempItemChargeAssgntPurch."Qty. to Assign",
// Add the following lines.
ReturnShptLine."Indirect Cost %",TotalInvDiscAmtRemaining,
TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining);
END;
LOCAL PROCEDURE PostItemChargePerTransfer@23(PurchLine@1000 : Record 39;VAR TotalInvDiscAmtRemaining@1016 : Decimal;VAR TotalQtyRemaining@1017 : Decimal;VAR TotalLineDiscAmtRemaining@1018 : Decimal;VAR TotalLineAmtRemaining@1019 : Decimal);
// End of the added lines.
VAR
TransRcptLine@1002 : Record 5747;
ItemApplnEntry@1003 : Record 339;
DummyTrackingSpecification@1001 : Record 336;
... -
Nomainiet šo kodu funkciju PostItemChargePerTransfer thePurch.-pēc šāda koda (90)
Kods...PurchLine."Bin Code" := '';
PurchLine."Line No." := "Document Line No.";
IF TransRcptLine."Item Rcpt. Entry No." = 0 THEN
// Delete the following line.
PostItemChargePerITTransfer(PurchLine,TransRcptLine)
ELSE BEGIN
TotalAmountToPostFCY := "Amount to Assign";
IF PurchHeader."Currency Code" <> '' THEN
TotalAmountToPostLCY :=
...Aizstāšanas kodu
...PurchLine."Bin Code" := '';
PurchLine."Line No." := "Document Line No.";
IF TransRcptLine."Item Rcpt. Entry No." = 0 THEN
// Add the following lines.
PostItemChargePerITTransfer(PurchLine,TransRcptLine,TotalInvDiscAmtRemaining,
TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining)
// End of the added lines.
ELSE BEGIN
TotalAmountToPostFCY := "Amount to Assign";
IF PurchHeader."Currency Code" <> '' THEN
TotalAmountToPostLCY :=
... -
Nomainiet šo kodu funkciju PostItemChargePerITTransfer thePurch.-pēc koda (90) šādi:
Kods 1...END;
END;
END;
// Delete the following line.
LOCAL PROCEDURE PostItemChargePerITTransfer@43(PurchLine@1000 : Record 39;TransRcptLine@1017 : Record 5747);
VAR
TempItemLedgEntry@1016 : TEMPORARY Record 32;
ItemTrackingMgt@1001 : Codeunit 6500;
Factor@1023 : Decimal;
...Aizstāšanas kods = 1
...END;
END;
END;
// Add the following line.
LOCAL PROCEDURE PostItemChargePerITTransfer@43(PurchLine@1000 : Record 39;TransRcptLine@1017 : Record 5747;VAR TotalInvDiscAmtRemaining@1026 : Decimal;VAR TotalQtyRemaining@1024 : Decimal;VAR TotalLineDiscAmtRemaining@1025 : Decimal;VAR TotalLineAmtRemaining@1030 : Decimal);
VAR
TempItemLedgEntry@1016 : TEMPORARY Record 32;
ItemTrackingMgt@1001 : Codeunit 6500;
Factor@1023 : Decimal;
...Kods 2.
...AmountToAssign := ROUND(NonDistrAmountToAssign * Factor,GLSetup."Amount Rounding Precision");
IF Factor < 1 THEN BEGIN
PostItemCharge(PurchLine,
TempItemLedgEntry."Entry No.",TempItemLedgEntry.Quantity,
// Delete the following line.
AmountToAssign,QtyToAssign,0);
NonDistrQuantity := NonDistrQuantity - TempItemLedgEntry.Quantity;
NonDistrQtyToAssign := NonDistrQtyToAssign - QtyToAssign;
NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
...Aizstāšanas kods 2.
...AmountToAssign := ROUND(NonDistrAmountToAssign * Factor,GLSetup."Amount Rounding Precision");
IF Factor < 1 THEN BEGIN
PostItemCharge(PurchLine,
TempItemLedgEntry."Entry No.",TempItemLedgEntry.Quantity,
// Add the following lines.
AmountToAssign,QtyToAssign,0,TotalInvDiscAmtRemaining,
TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining);
// End of the added lines.
NonDistrQuantity := NonDistrQuantity - TempItemLedgEntry.Quantity;
NonDistrQtyToAssign := NonDistrQtyToAssign - QtyToAssign;
NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
...Kods 3
...NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
PostItemCharge(PurchLine,
TempItemLedgEntry."Entry No.",TempItemLedgEntry.Quantity,
// Delete the following line.
NonDistrAmountToAssign,NonDistrQtyToAssign,0);
UNTIL TempItemLedgEntry.NEXT = 0;
END ELSE
ERROR(Text042);
END;
...Aizstāšanas kodu 3.
...NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
PostItemCharge(PurchLine,
TempItemLedgEntry."Entry No.",TempItemLedgEntry.Quantity,
// Add the following lines.
NonDistrAmountToAssign,NonDistrQtyToAssign,0,TotalInvDiscAmtRemaining,
TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining);
// End of the added lines.
UNTIL TempItemLedgEntry.NEXT = 0;
END ELSE
ERROR(Text042);
END;
... -
Nomainiet šo kodu funkciju PostItemChargePerSalesShpt thePurch.-pēc koda (90) šādi:
Kods 1...ERROR(Text042);
END;
END;
// Delete the following line.
LOCAL PROCEDURE PostItemChargePerSalesShpt@41(PurchLine@1000 : Record 39);
VAR
SalesShptLine@1002 : Record 111;
TempItemLedgEntry@1010 : TEMPORARY Record 32;
ItemTrackingMgt@1009 : Codeunit 6500;
...Aizstāšanas kods = 1
...ERROR(Text042);
END;
END;
// Add the following line.
LOCAL PROCEDURE PostItemChargePerSalesShpt@41(PurchLine@1000 : Record 39;VAR TotalInvDiscAmtRemaining@1012 : Decimal;VAR TotalQtyRemaining@1013 : Decimal;VAR TotalLineDiscAmtRemaining@1014 : Decimal;VAR TotalLineAmtRemaining@1015 : Decimal);
VAR
SalesShptLine@1002 : Record 111;
TempItemLedgEntry@1010 : TEMPORARY Record 32;
ItemTrackingMgt@1009 : Codeunit 6500;
...Kods 2.
...AmountToAssign := ROUND(NonDistrAmountToAssign * Factor,GLSetup."Amount Rounding Precision");
IF Factor < 1 THEN BEGIN
PostItemCharge(PurchLine,
TempItemLedgEntry."Entry No.",TempItemLedgEntry.Quantity,
// Delete the following line.
AmountToAssign * Sign,QtyToAssign,0);
NonDistrQuantity := NonDistrQuantity - TempItemLedgEntry.Quantity;
NonDistrQtyToAssign := NonDistrQtyToAssign - QtyToAssign;
NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
...Aizstāšanas kods 2.
...AmountToAssign := ROUND(NonDistrAmountToAssign * Factor,GLSetup."Amount Rounding Precision");
IF Factor < 1 THEN BEGIN
PostItemCharge(PurchLine,
TempItemLedgEntry."Entry No.",TempItemLedgEntry.Quantity,
// Add the following lines.
AmountToAssign * Sign,QtyToAssign,0,TotalInvDiscAmtRemaining,
TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining);
// End of the added lines.
NonDistrQuantity := NonDistrQuantity - TempItemLedgEntry.Quantity;
NonDistrQtyToAssign := NonDistrQtyToAssign - QtyToAssign;
NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
...Kods 3
...NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
PostItemCharge(PurchLine,
TempItemLedgEntry."Entry No.",TempItemLedgEntry.Quantity,
// Delete the following line.
NonDistrAmountToAssign * Sign,NonDistrQtyToAssign,0);
UNTIL TempItemLedgEntry.NEXT = 0;
END ELSE
ERROR(Text042)
ELSE
...Aizstāšanas kodu 3.
...NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
PostItemCharge(PurchLine,
TempItemLedgEntry."Entry No.",TempItemLedgEntry.Quantity,
// Add the following lines.
NonDistrAmountToAssign * Sign,NonDistrQtyToAssign,0,TotalInvDiscAmtRemaining,
TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining);
// End of the added lines.
UNTIL TempItemLedgEntry.NEXT = 0;
END ELSE
ERROR(Text042)
ELSE
...Kods 4
...ELSE
PostItemCharge(PurchLine,
SalesShptLine."Item Shpt. Entry No.",-SalesShptLine."Quantity (Base)",
TempItemChargeAssgntPurch."Amount to Assign" * Sign,
// Delete the following lines.
TempItemChargeAssgntPurch."Qty. to Assign",0)
END;
PROCEDURE PostItemChargePerRetRcpt@37(PurchLine@1001 : Record 39);
// End of the deleted lines.
VAR
ReturnRcptLine@1000 : Record 6661;
TempItemLedgEntry@1011 : TEMPORARY Record 32;
ItemTrackingMgt@1010 : Codeunit 6500;
...Aizstāšanas kodu 4
...ELSE
PostItemCharge(PurchLine,
SalesShptLine."Item Shpt. Entry No.",-SalesShptLine."Quantity (Base)",
TempItemChargeAssgntPurch."Amount to Assign" * Sign,
// Add the following lines.
TempItemChargeAssgntPurch."Qty. to Assign",0,TotalInvDiscAmtRemaining,
TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining)
END;
PROCEDURE PostItemChargePerRetRcpt@37(PurchLine@1001 : Record 39;VAR TotalInvDiscAmtRemaining@1012 : Decimal;VAR TotalQtyRemaining@1013 : Decimal;VAR TotalLineDiscAmtRemaining@1014 : Decimal;VAR TotalLineAmtRemaining@1015 : Decimal);
// End of the added lines.
VAR
ReturnRcptLine@1000 : Record 6661;
TempItemLedgEntry@1011 : TEMPORARY Record 32;
ItemTrackingMgt@1010 : Codeunit 6500;
... -
Nomainiet šo kodu funkciju PostItemChargePerRetRcpt thePurch.-pēc koda (90) šādi:
Kods 1...AmountToAssign := ROUND(NonDistrAmountToAssign * Factor,GLSetup."Amount Rounding Precision");
IF Factor < 1 THEN BEGIN
PostItemCharge(PurchLine,
TempItemLedgEntry."Entry No.",TempItemLedgEntry.Quantity,
// Delete the following line.
AmountToAssign * Sign,QtyToAssign,0);
NonDistrQuantity := NonDistrQuantity - TempItemLedgEntry.Quantity;
NonDistrQtyToAssign := NonDistrQtyToAssign - QtyToAssign;
NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
...Aizstāšanas kods = 1
...AmountToAssign := ROUND(NonDistrAmountToAssign * Factor,GLSetup."Amount Rounding Precision");
IF Factor < 1 THEN BEGIN
PostItemCharge(PurchLine,
TempItemLedgEntry."Entry No.",TempItemLedgEntry.Quantity,
// Add the following lines.
AmountToAssign * Sign,QtyToAssign,0,TotalInvDiscAmtRemaining,
TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining);
// End of the added lines.
NonDistrQuantity := NonDistrQuantity - TempItemLedgEntry.Quantity;
NonDistrQtyToAssign := NonDistrQtyToAssign - QtyToAssign;
NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
...Kods 2.
...NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
PostItemCharge(PurchLine,
TempItemLedgEntry."Entry No.",TempItemLedgEntry.Quantity,
// Delete the following line.
NonDistrAmountToAssign * Sign,NonDistrQtyToAssign,0);
UNTIL TempItemLedgEntry.NEXT = 0;
END ELSE
ERROR(Text042)
ELSE
...Aizstāšanas kods 2.
...NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
PostItemCharge(PurchLine,
TempItemLedgEntry."Entry No.",TempItemLedgEntry.Quantity,
// Add the following lines.
NonDistrAmountToAssign * Sign,NonDistrQtyToAssign,0,TotalInvDiscAmtRemaining,
TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining);
// End of the added lines.
UNTIL TempItemLedgEntry.NEXT = 0;
END ELSE
ERROR(Text042)
ELSE
...Kods 3
...ELSE
PostItemCharge(PurchLine,
ReturnRcptLine."Item Rcpt. Entry No.",ReturnRcptLine."Quantity (Base)",
TempItemChargeAssgntPurch."Amount to Assign" * Sign,
// Delete the following line.
TempItemChargeAssgntPurch."Qty. to Assign",0)
END;
LOCAL PROCEDURE PostAssocItemJnlLine@3(QtyToBeShipped@1000 : Decimal;QtyToBeShippedBase@1001 : Decimal) : Integer;
VAR
...Aizstāšanas kodu 3.
...ELSE
PostItemCharge(PurchLine,
ReturnRcptLine."Item Rcpt. Entry No.",ReturnRcptLine."Quantity (Base)",
TempItemChargeAssgntPurch."Amount to Assign" * Sign,
// Add the following lines.
TempItemChargeAssgntPurch."Qty. to Assign",0,TotalInvDiscAmtRemaining,
TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining)
// End of the added lines.
END;
LOCAL PROCEDURE PostAssocItemJnlLine@3(QtyToBeShipped@1000 : Decimal;QtyToBeShippedBase@1001 : Decimal) : Integer;
VAR
... -
Nomainiet šo kodu funkciju PostItemCharge thePurch.-pēc koda (90) šādi:
Kods 1...TempValueEntryRelation.DELETEALL;
END;
END;
// Delete the following line.
LOCAL PROCEDURE PostItemCharge@42(PurchLine@1000 : Record 39;ItemEntryNo@1004 : Integer;QuantityBase@1005 : Decimal;AmountToAssign@1006 : Decimal;QtyToAssign@1007 : Decimal;IndirectCostPct@1008 : Decimal);
VAR
DummyTrackingSpecification@1001 : Record 336;
BEGIN
WITH TempItemChargeAssgntPurch DO BEGIN
...Aizstāšanas kods = 1
...TempValueEntryRelation.DELETEALL;
END;
END;
// Add the following line.
LOCAL PROCEDURE PostItemCharge@42(PurchLine@1000 : Record 39;ItemEntryNo@1004 : Integer;QuantityBase@1005 : Decimal;AmountToAssign@1006 : Decimal;QtyToAssign@1007 : Decimal;IndirectCostPct@1008 : Decimal;VAR TotalInvDiscAmtRemaining@1009 : Decimal;VAR TotalQtyRemaining@1010 : Decimal;VAR TotalLineDiscAmtRemaining@1011 : Decimal;VAR TotalLineAmtRemaining@1012 : Decimal);
VAR
DummyTrackingSpecification@1001 : Record 336;
BEGIN
WITH TempItemChargeAssgntPurch DO BEGIN
...Kods 2.
...ROUND(
PurchLine.Amount / QuantityBase,GLSetup."Unit-Amount Rounding Precision");
PurchLine."Inv. Discount Amount" := ROUND(
// Delete the following lines.
PurchLine."Inv. Discount Amount" / PurchLine.Quantity * QtyToAssign,
GLSetup."Amount Rounding Precision");
PurchLine."Line Discount Amount" := ROUND(
PurchLine."Line Discount Amount" / PurchLine.Quantity * QtyToAssign,
GLSetup."Amount Rounding Precision");
// End of the deleted lines.
PostItemJnlLine(
PurchLine,
0,0,
QuantityBase,QuantityBase,
...Aizstāšanas kods 2.
...ROUND(
PurchLine.Amount / QuantityBase,GLSetup."Unit-Amount Rounding Precision");
PurchLine."Inv. Discount Amount" := ROUND(
// Add the following lines.
TotalInvDiscAmtRemaining / TotalQtyRemaining * QtyToAssign,
GLSetup."Amount Rounding Precision");
PurchLine."Line Discount Amount" := ROUND(
TotalLineDiscAmtRemaining / TotalQtyRemaining * QtyToAssign,
GLSetup."Amount Rounding Precision");
PurchLine."Line Amount" := ROUND(
TotalLineAmtRemaining / TotalQtyRemaining * QtyToAssign,
GLSetup."Amount Rounding Precision");
TotalInvDiscAmtRemaining := TotalInvDiscAmtRemaining - PurchLine."Inv. Discount Amount";
TotalLineDiscAmtRemaining := TotalLineDiscAmtRemaining - PurchLine."Line Discount Amount";
TotalLineAmtRemaining := TotalLineAmtRemaining - PurchLine."Line Amount";
TotalQtyRemaining := TotalQtyRemaining - QtyToAssign;
// End of the added lines.
PostItemJnlLine(
PurchLine,
0,0,
QuantityBase,QuantityBase,
...
Priekšnosacījumi
Datorā ir jābūt instalētai kādai no lai lietotu šo labojumfailu šādiem produktiem:
-
Microsoft Dynamics NAV 2009 R2
-
Microsoft Dynamics NAV 2009 SP1
Informācija par noņemšanu
Nevar noņemt šo labojumfailu.
Statuss
Korporācija Microsoft ir apstiprinājusi, ka šī problēma pastāv Microsoft produktos, kas ir minēti sadaļā "Attiecas uz".
Piezīme. Šis ir STEIDZAMI PUBLICĒJAMS raksts, kas izveidots tieši Microsoft atbalsta organizācijā. Šajā rakstā ietvertā informācija ir sniegta, reaģējot uz nesen konstatētām problēmām. Tā kā šis raksts ir tapis pieejams neilgā laikā, materiālos var būt pareizrakstības kļūdas un tās var tikt labotas jebkurā laikā bez paziņojuma. Skatīt Lietošanasciti apsvērumi.
