Applies ToWindows Server 2008 R2 Datacenter Windows Server 2008 R2 Enterprise Windows Server 2008 R2 for Itanium-Based Systems Windows Server 2008 R2 Foundation Windows Server 2008 R2 Standard Windows 7 Enterprise Windows 7 Home Basic Windows 7 Home Premium Windows 7 Professional Windows 7 Ultimate

Symptoms

Consider the following scenario:

  • You have a computer that is running Windows 7 or Windows Server 2008 R2.

  • You install hotfix 2386184 on the computer to enable the skipassource flag of the netsh command.

  • You assign many IP addresses to a network adapter on the computer by using the netsh command together with the skipassource flag.

  • You update some IP settings for the network adapter in the Network and Sharing Center graphical user interface (GUI). For example, you edit the subnet mask of an IP address that has the skipassource flag set to true.

In this scenario, the skipassource flag of the IP address and of all IP addresses that are listed under that address in the GUI are cleared incorrectly. Notes

  • To list the IPv4 addresses that have the skipassource flag set to true, run the following command: netsh int ipv4 show ipaddresses level=verboseFor more information about hotfix 2386184, click the following article number to view the article in the Microsoft Knowledge Base:

    2386184 IP addresses are still registered on the DNS servers even if the IP addresses are not used for outgoing traffic on a computer that is running Windows 7 or Windows Server 2008 R2

  • After applying this hotfix, the Startup type of the DHCP client service will be Automatic. To avoid this, you might have to apply hotfix 2684965. For more information, click the following article number to view the article in the Microsoft Knowledge Base:

    2684965 Startup Type property in the DHCP Client service is changed to Automatic in Windows 7 or in Windows Server 2008 R2

Cause

The issue occurs because the GUI does not recognize the skipassource flag, and the GUI uses an incorrect method to handle changes of IP settings. When IP settings are changed, the GUI deletes all the old IP addresses from the old list and then adds new IP addresses to the new list. Because the GUI does not know the skipassource flag, the GUI does not copy the flag when IP addresses are added to the list. Therefore, the skipassource flag is cleared.

Resolution

Hotfix information

A supported hotfix is available from Microsoft. However, this hotfix is intended to correct only the problem that is described in this article. Apply this hotfix only to systems that are experiencing the problem that is described in this article. This hotfix might receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next software update that contains this hotfix.If the hotfix is available for download, there is a "Hotfix download available" section at the top of this Knowledge Base article. If this section does not exist, contact Microsoft Customer Service and Support to obtain the hotfix. Note If additional issues occur or if any troubleshooting is required, you might have to create a separate service request. The usual support costs will apply to additional support questions and issues that do not qualify for this specific hotfix. For a complete list of Microsoft Customer Service and Support telephone numbers or to create a separate service request, visit the following Microsoft website:

http://support.microsoft.com/contactus/?ws=supportNote The "Hotfix download available" form displays the languages for which the hotfix is available. If you do not see your language, it is because a hotfix is not available for that language.

Prerequisites

To apply this hotfix, To apply this hotfix, you must be running one of the following operating systems:

  • Windows 7

  • Windows 7 with Service Pack 1 (SP1)

  • Windows Server 2008 R2

  • Windows Server 2008 R2 with Service Pack 1 (SP1)

For more information about how to obtain a Windows 7 or Windows Server 2008 R2 service pack, click the following article number to view the article in the Microsoft Knowledge Base:

976932 Information about Service Pack 1 for Windows 7 and for Windows Server 2008 R2

Registry information

To use the hotfix in this package, you do not have to make any changes to the registry.

Restart requirement

You must restart the computer after you apply this hotfix.

Hotfix replacement information

This hotfix does not replace a previously released hotfix.

File information

The English (United States) version of this hotfix installs files that have the attributes that are listed in the following tables. The dates and the times for these files are listed in Coordinated Universal Time (UTC). The dates and the times for these files on your local computer are displayed in your local time together with your current daylight saving time (DST) bias. Additionally, the dates and the times may change when you perform certain operations on the files.

Windows 7 and Windows Server 2008 R2 file information notes

Important Windows 7 hotfixes and Windows Server 2008 R2 hotfixes are included in the same packages. However, hotfixes on the Hotfix Request page are listed under both operating systems. To request the hotfix package that applies to one or both operating systems, select the hotfix that is listed under "Windows 7/Windows Server 2008 R2" on the page. Always refer to the "Applies To" section in articles to determine the actual operating system to which each hotfix applies.

  • The files that apply to a specific product, SR_Level (RTM, SPn), and service branch (LDR, GDR) can be identified by examining the file version numbers as shown in the following table.

    Version

    Product

    SR_Level

    Service branch

    6.1.760 0. 20xxx

    Windows 7 and Windows Server 2008 R2

    RTM

    LDR

    6.1.760 1. 21xxx

    Windows 7 and Windows Server 2008 R2

    SP1

    LDR

  • The MANIFEST files (.manifest) and the MUM files (.mum) that are installed for each environment are listed separately in the "Additional file information for Windows 7 and for Windows Server 2008 R2" section. MUM and MANIFEST files, and the associated security catalog (.cat) files, are very important to maintaining the state of the updated components. The security catalog files, for which the attributes are not listed, are signed with a Microsoft digital signature.

For all supported x86-based versions of Windows 7

File name

File version

File size

Date

Time

Platform

Netiomig.dll

6.1.7600.20971

57,856

23-May-2011

04:36

x86

Netiougc.exe

6.1.7600.20971

25,600

23-May-2011

04:32

x86

Tcpipcfg.dll

6.1.7600.20971

181,760

23-May-2011

04:37

x86

Netiomig.dll

6.1.7601.21732

57,856

23-May-2011

06:07

x86

Netiougc.exe

6.1.7601.21732

25,600

23-May-2011

05:59

x86

Tcpipcfg.dll

6.1.7601.21732

181,760

23-May-2011

06:09

x86

For all supported x64-based versions of Windows 7 and of Windows Server 2008 R2

File name

File version

File size

Date

Time

Platform

Netiomig.dll

6.1.7600.20971

72,192

23-May-2011

05:22

x64

Netiougc.exe

6.1.7600.20971

26,624

23-May-2011

05:16

x64

Tcpipcfg.dll

6.1.7600.20971

253,952

23-May-2011

05:24

x64

Netiomig.dll

6.1.7601.21732

72,192

23-May-2011

05:08

x64

Netiougc.exe

6.1.7601.21732

26,624

23-May-2011

05:06

x64

Tcpipcfg.dll

6.1.7601.21732

253,952

23-May-2011

05:08

x64

Netiomig.dll

6.1.7600.20971

57,856

23-May-2011

04:36

x86

Netiougc.exe

6.1.7600.20971

25,600

23-May-2011

04:32

x86

Tcpipcfg.dll

6.1.7600.20971

181,760

23-May-2011

04:37

x86

Netiomig.dll

6.1.7601.21732

57,856

23-May-2011

06:07

x86

Netiougc.exe

6.1.7601.21732

25,600

23-May-2011

05:59

x86

Tcpipcfg.dll

6.1.7601.21732

181,760

23-May-2011

06:09

x86

For all supported IA-64-based versions of Windows Server 2008 R2

File name

File version

File size

Date

Time

Platform

Netiomig.dll

6.1.7600.20971

158,720

23-May-2011

04:04

IA-64

Netiougc.exe

6.1.7600.20971

55,808

23-May-2011

04:02

IA-64

Tcpipcfg.dll

6.1.7600.20971

520,192

23-May-2011

04:04

IA-64

Netiomig.dll

6.1.7601.21732

158,720

23-May-2011

04:06

IA-64

Netiougc.exe

6.1.7601.21732

55,808

23-May-2011

04:03

IA-64

Tcpipcfg.dll

6.1.7601.21732

520,192

23-May-2011

04:06

IA-64

Netiomig.dll

6.1.7600.20971

57,856

23-May-2011

04:36

x86

Netiougc.exe

6.1.7600.20971

25,600

23-May-2011

04:32

x86

Tcpipcfg.dll

6.1.7600.20971

181,760

23-May-2011

04:37

x86

Netiomig.dll

6.1.7601.21732

57,856

23-May-2011

06:07

x86

Netiougc.exe

6.1.7601.21732

25,600

23-May-2011

05:59

x86

Tcpipcfg.dll

6.1.7601.21732

181,760

23-May-2011

06:09

x86

Status

Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the "Applies to" section.

More Information

Because the GUI is unaware of the skipassource flag setting, this update makes it impossible to verify that an IP address that was edited still has the skipassource flag. Therefore, if you have multiple IP addresses on one network adapter and you edit one of them, the flags of the other IP addresses are not affected. However, the flag of the IP address that you edited still reverts to false. This behavior is by design.For more information about software update terminology, click the following article number to view the article in the Microsoft Knowledge Base:

824684 Description of the standard terminology that is used to describe Microsoft software updates

Additional file information

Additional file information for Windows 7 and for Windows Server 2008 R2

Additional files for all supported x86-based versions of Windows 7

File name

Update.mum

File version

Not Applicable

File size

2,773

Date (UTC)

23-May-2011

Time (UTC)

09:57

Platform

Not Applicable

File name

X86_microsoft-windows-tcpip_31bf3856ad364e35_6.1.7600.20971_none_61ec610d09c65069.manifest

File version

Not Applicable

File size

219,946

Date (UTC)

23-May-2011

Time (UTC)

04:57

Platform

Not Applicable

File name

X86_microsoft-windows-tcpip_31bf3856ad364e35_6.1.7601.21732_none_63fefe0d06cb65e8.manifest

File version

Not Applicable

File size

219,946

Date (UTC)

23-May-2011

Time (UTC)

06:30

Platform

Not Applicable

Additional files for all supported x64-based versions of Windows 7 and of Windows Server 2008 R2

File name

Amd64_microsoft-windows-tcpip_31bf3856ad364e35_6.1.7600.20971_none_be0afc90c223c19f.manifest

File version

Not Applicable

File size

219,952

Date (UTC)

23-May-2011

Time (UTC)

05:50

Platform

Not Applicable

File name

Amd64_microsoft-windows-tcpip_31bf3856ad364e35_6.1.7601.21732_none_c01d9990bf28d71e.manifest

File version

Not Applicable

File size

219,952

Date (UTC)

23-May-2011

Time (UTC)

07:12

Platform

Not Applicable

File name

Update.mum

File version

Not Applicable

File size

3,215

Date (UTC)

23-May-2011

Time (UTC)

09:57

Platform

Not Applicable

File name

Wow64_microsoft-windows-tcpip_31bf3856ad364e35_6.1.7600.20971_none_c85fa6e2f684839a.manifest

File version

Not Applicable

File size

76,974

Date (UTC)

23-May-2011

Time (UTC)

04:52

Platform

Not Applicable

File name

Wow64_microsoft-windows-tcpip_31bf3856ad364e35_6.1.7601.21732_none_ca7243e2f3899919.manifest

File version

Not Applicable

File size

76,974

Date (UTC)

23-May-2011

Time (UTC)

06:25

Platform

Not Applicable

Additional files for all supported IA-64-based versions of Windows Server 2008 R2

File name

Ia64_microsoft-windows-tcpip_31bf3856ad364e35_6.1.7600.20971_none_61ee050309c45965.manifest

File version

Not Applicable

File size

219,949

Date (UTC)

23-May-2011

Time (UTC)

05:53

Platform

Not Applicable

File name

Ia64_microsoft-windows-tcpip_31bf3856ad364e35_6.1.7601.21732_none_6400a20306c96ee4.manifest

File version

Not Applicable

File size

219,949

Date (UTC)

23-May-2011

Time (UTC)

07:13

Platform

Not Applicable

File name

Update.mum

File version

Not Applicable

File size

2,168

Date (UTC)

23-May-2011

Time (UTC)

09:57

Platform

Not Applicable

File name

Wow64_microsoft-windows-tcpip_31bf3856ad364e35_6.1.7600.20971_none_c85fa6e2f684839a.manifest

File version

Not Applicable

File size

76,974

Date (UTC)

23-May-2011

Time (UTC)

04:52

Platform

Not Applicable

File name

Wow64_microsoft-windows-tcpip_31bf3856ad364e35_6.1.7601.21732_none_ca7243e2f3899919.manifest

File version

Not Applicable

File size

76,974

Date (UTC)

23-May-2011

Time (UTC)

06:25

Platform

Not Applicable

Need more help?

Want more options?

Explore subscription benefits, browse training courses, learn how to secure your device, and more.

Communities help you ask and answer questions, give feedback, and hear from experts with rich knowledge.