Mesmo quando você não tem permissão para trabalhar com Cartera a versão em espanhol do Microsoft Dynamics NAV 2009, você pode aplicar um pagamento e uma lista de entradas de razão de cliente ou fornecedor. O problema é que quando você "sem permissões Cartera" aplicar esses documentos (pagamento e cobrança) lista permanece "aberta" nos documentos Cartera a receber ou a pagar. Isso faz com que as inconsistências no banco de dados. Esse problema ocorre nos seguintes produtos:
-
A versão em espanhol do Microsoft Dynamics NAV 2009 R2
-
A versão em espanhol do Microsoft Dynamics NAV 2009 SP1
Resolução
Informações sobre o hotfix
Um hotfix suportado está disponível agora na Microsoft. No entanto, apenas destina-se a corrigir o problema descrito neste artigo. Aplique-o somente aos sistemas que apresentarem esse problema específico. Esta correção poderá ser submetida a testes adicionais. Portanto, se esse problema não o prejudicar, recomendamos que você aguarde o próximo service pack do Microsoft Dynamics NAV 2009 ou a próxima versão do Microsoft Dynamics NAV que contém esse hotfix.
Observação: Em alguns casos, as taxas cobradas para suporte a chamadas podem ser canceladas se um profissional de suporte técnico do Microsoft Dynamics e produtos relacionados determina que uma atualização específica resolverá o problema. Os custos normais de suporte serão aplicados para questões de suporte adicionais e problemas que não se qualificam à atualização específica em questão.
Informações sobre a instalação
A Microsoft fornece exemplos de programação somente para ilustração, sem garantia expressa ou implícita. Isso inclui, mas não está limitado a, garantias implícitas de comercialização ou adequação a um propósito específico. Este artigo presume que você esteja familiarizado com a linguagem de programação que está sendo demonstrada e com as ferramentas usadas para criar e depurar procedimentos. Os engenheiros de suporte da Microsoft podem ajudar a explicar a funcionalidade de um determinado procedimento. No entanto, eles não modificarão esses exemplos para fornecer funcionalidades adicionais ou construir procedimentos para atender às suas necessidades específicas.
Observação: Antes de instalar esse hotfix, verifique se todos os usuários do cliente do Microsoft Dynamics NAV estiver desconectados do sistema. Isso inclui os serviços do Microsoft Dynamics NAV Application Server (NAS). Você deve ser o único usuário do cliente conectado ao implementar esse hotfix.
Para implementar esse hotfix, você deve ter uma licença de desenvolvedor.
É recomendável que a conta de usuário na janela de Logins do Windows ou na janela banco de dados seja atribuída a ID de função "SUPER". Se a conta de usuário não pode ser atribuída a ID de função "SUPER", você deverá verificar se a conta de usuário tem as seguintes permissões:
-
A permissão Modificar para o objeto que será alterado.
-
A permissão de execução para o objeto 5210 de identificação de objeto de sistema e o sistema 9015 de identificação de objeto
objeto.
Observação: Você não precisa ter direitos para os armazenamentos de dados, a menos que você precise executar o reparo de dados.
Alterações de código
Observação sempre testar código correções em um ambiente controlado, antes de aplicar as correções para os computadores de produção. Antes de aplicar a alteração, importe todas as atualizações SEPA.
Para resolver esse problema, execute as seguintes etapas:
-
Altere o código no Variablesin Global geral Jnl.-lançar linha Codeunit (12) da seguinte maneira:
Código existente...Text1100010@1100016 : TextConst 'ENU=Remove it from its payment order and try again.;ESP=B¢rrelo de la orden de pago e int‚ntelo de nuevo.';
Text1100011@1100021 : TextConst 'ENU=Document Type is " " in Line %1. This posting will not realize the VAT, do you want to proceed?;ESP=El tipo de documento es " " en la l¡nea %1. Esta contabilizaci¢n no tendr en cuenta el IVA, ¨desea continuar?';
Text1100012@1100022 : TextConst 'ENU=The posting process has been cancelled by the user.;ESP=El proceso de registro ha sido cancelado por el usuario.';
AppliedAmountLCY2@1100053 : Decimal;
AppliesToDocType@1100023 : Integer;
PROCEDURE GetGLReg@10(VAR NewGLReg@1000 : Record 45);
BEGIN
NewGLReg := GLReg;
END;
...Código de substituição
...Text1100010@1100016 : TextConst 'ENU=Remove it from its payment order and try again.;ESP=B¢rrelo de la orden de pago e int‚ntelo de nuevo.';
Text1100011@1100021 : TextConst 'ENU=Document Type is " " in Line %1. This posting will not realize the VAT, do you want to proceed?;ESP=El tipo de documento es " " en la l¡nea %1. Esta contabilizaci¢n no tendr en cuenta el IVA, ¨desea continuar?';
Text1100012@1100022 : TextConst 'ENU=The posting process has been cancelled by the user.;ESP=El proceso de registro ha sido cancelado por el usuario.';
AppliedAmountLCY2@1100053 : Decimal;
AppliesToDocType@1100023 : Integer;
// Add the following line.
Text1100013@1100026 : TextConst 'ENU=You do not have permissions to apply or unapply documents in the Cartera Module.';
// End of the added line.
PROCEDURE GetGLReg@10(VAR NewGLReg@1000 : Record 45);
BEGIN
NewGLReg := GLReg;
END;
... -
Alterar o código de ApplyCustLedgEntryfunção em geral Jnl.-lançar linha Codeunit (12) da seguinte maneira:
1 de código existente...OldCustLedgEntry.SETRANGE("Bill No.",NewCVLedgEntryBuf."Applies-to Bill No.");
OldCustLedgEntry.SETRANGE("Customer No.",NewCVLedgEntryBuf."CV No.");
OldCustLedgEntry.SETRANGE(Open,TRUE);
OldCustLedgEntry.FINDFIRST;
OldCustLedgEntry.TESTFIELD(Positive,NOT NewCVLedgEntryBuf.Positive);
IF AppManagement.AccessToCartera THEN
DocPost.CheckAppliedReceivableDoc(
OldCustLedgEntry,GenJnlLine."System-Created Entry");
...1 código de substituição
...OldCustLedgEntry.SETRANGE("Bill No.",NewCVLedgEntryBuf."Applies-to Bill No.");
OldCustLedgEntry.SETRANGE("Customer No.",NewCVLedgEntryBuf."CV No.");
OldCustLedgEntry.SETRANGE(Open,TRUE);
OldCustLedgEntry.FINDFIRST;
// Add the following line.
CheckCarteraAccessPermissions(OldCustLedgEntry."Document Situation");
// End of the added line.
OldCustLedgEntry.TESTFIELD(Positive,NOT NewCVLedgEntryBuf.Positive);
IF AppManagement.AccessToCartera THEN
DocPost.CheckAppliedReceivableDoc(
OldCustLedgEntry,GenJnlLine."System-Created Entry");
...2 de código existente
...// Check Cust Ledger Entry and add to Temp.
IF SalesSetup."Appln. between Currencies" = SalesSetup."Appln. between Currencies"::None THEN
OldCustLedgEntry.SETRANGE("Currency Code",NewCVLedgEntryBuf."Currency Code");
IF OldCustLedgEntry.FINDSET(FALSE,FALSE) THEN
// Delete the following lines.
REPEAT
IF GenJnlApply.CheckAgainstApplnCurrency(
NewCVLedgEntryBuf."Currency Code",
OldCustLedgEntry."Currency Code",
GenJnlLine."Account Type"::Customer,
FALSE)
THEN BEGIN
IF (OldCustLedgEntry."Posting Date" > ApplyingDate) AND (OldCustLedgEntry."Applies-to ID" <> '') THEN
ApplyingDate := OldCustLedgEntry."Posting Date";
TempOldCustLedgEntry := OldCustLedgEntry;
TempOldCustLedgEntry.INSERT;
END;
UNTIL OldCustLedgEntry.NEXT=0;
// End of the deleted lines.
TempOldCustLedgEntry.SETRANGE(Positive,NewCVLedgEntryBuf."Remaining Amount" > 0);
IF TempOldCustLedgEntry.FIND('-') THEN BEGIN
...Código de substituição 2
...// Check Cust Ledger Entry and add to Temp.
IF SalesSetup."Appln. between Currencies" = SalesSetup."Appln. between Currencies"::None THEN
OldCustLedgEntry.SETRANGE("Currency Code",NewCVLedgEntryBuf."Currency Code");
IF OldCustLedgEntry.FINDSET(FALSE,FALSE) THEN
// Add the following lines.
REPEAT
CheckCarteraAccessPermissions(OldCustLedgEntry."Document Situation");
IF GenJnlApply.CheckAgainstApplnCurrency(
NewCVLedgEntryBuf."Currency Code",
OldCustLedgEntry."Currency Code",
GenJnlLine."Account Type"::Customer,
FALSE)
THEN BEGIN
IF (OldCustLedgEntry."Posting Date" > ApplyingDate) AND (OldCustLedgEntry."Applies-to ID" <> '') THEN
ApplyingDate := OldCustLedgEntry."Posting Date";
TempOldCustLedgEntry := OldCustLedgEntry;
TempOldCustLedgEntry.INSERT;
END;
UNTIL OldCustLedgEntry.NEXT=0;
// End of the added lines.
TempOldCustLedgEntry.SETRANGE(Positive,NewCVLedgEntryBuf."Remaining Amount" > 0);
IF TempOldCustLedgEntry.FIND('-') THEN BEGIN... -
Alterar o código de função UnapplyCustLedgEntry em geral Jnl.-lançar linha Codeunit (12) da seguinte maneira:
Código existente...DtldCustLedgEntry2.SETRANGE("Customer No.",DtldCustLedgEntry."Customer No.");
DtldCustLedgEntry2.SETFILTER("Entry Type",'>%1',DtldCustLedgEntry."Entry Type"::"Initial Entry");
UnapplyVATEntries := FALSE;
DtldCustLedgEntry2.FINDSET;
REPEAT
DtldCustLedgEntry2.TESTFIELD(Unapplied,FALSE);
IF (DtldCustLedgEntry2."Entry Type" = DtldCustLedgEntry2."Entry Type"::"Payment Discount (VAT Adjustment)") OR
(DtldCustLedgEntry2."Entry Type" = DtldCustLedgEntry2."Entry Type"::"Payment Tolerance (VAT Adjustment)") OR
(DtldCustLedgEntry2."Entry Type" = DtldCustLedgEntry2."Entry Type"::"Payment Discount Tolerance (VAT Adjustment)")
THEN
...Código de substituição
...DtldCustLedgEntry2.SETRANGE("Customer No.",DtldCustLedgEntry."Customer No.");
DtldCustLedgEntry2.SETFILTER("Entry Type",'>%1',DtldCustLedgEntry."Entry Type"::"Initial Entry");
UnapplyVATEntries := FALSE;
DtldCustLedgEntry2.FINDSET;
REPEAT
// Add the following line.
CheckCarteraAccessPermissions(DtldCustLedgEntry2."Document Situation");
// End of the added line.
DtldCustLedgEntry2.TESTFIELD(Unapplied,FALSE);
IF (DtldCustLedgEntry2."Entry Type" = DtldCustLedgEntry2."Entry Type"::"Payment Discount (VAT Adjustment)") OR
(DtldCustLedgEntry2."Entry Type" = DtldCustLedgEntry2."Entry Type"::"Payment Tolerance (VAT Adjustment)") OR
(DtldCustLedgEntry2."Entry Type" = DtldCustLedgEntry2."Entry Type"::"Payment Discount Tolerance (VAT Adjustment)")
THEN
... -
Alterar o código de função ApplyVendLedgEntry em geral Jnl.-lançar linha Codeunit (12) da seguinte maneira:
1 de código existente...OldVendLedgEntry.SETRANGE("Document Type",GenJnlLine."Applies-to Doc. Type");
OldVendLedgEntry.SETRANGE("Bill No.",NewCVLedgEntryBuf."Applies-to Bill No.");
OldVendLedgEntry.SETRANGE("Vendor No.",NewCVLedgEntryBuf."CV No.");
OldVendLedgEntry.SETRANGE(Open,TRUE);
OldVendLedgEntry.FINDFIRST;
OldVendLedgEntry.TESTFIELD(Positive,NOT NewCVLedgEntryBuf.Positive);
IF AppManagement.AccessToCartera THEN
DocPost.CheckAppliedPayableDoc(
OldVendLedgEntry,GenJnlLine."System-Created Entry");
...1 código de substituição
...OldVendLedgEntry.SETRANGE("Document Type",GenJnlLine."Applies-to Doc. Type");
OldVendLedgEntry.SETRANGE("Bill No.",NewCVLedgEntryBuf."Applies-to Bill No.");
OldVendLedgEntry.SETRANGE("Vendor No.",NewCVLedgEntryBuf."CV No.");
OldVendLedgEntry.SETRANGE(Open,TRUE);
OldVendLedgEntry.FINDFIRST;
// Add the following line.
CheckCarteraAccessPermissions(OldVendLedgEntry."Document Situation");
// End of the added line.
OldVendLedgEntry.TESTFIELD(Positive,NOT NewCVLedgEntryBuf.Positive);
IF AppManagement.AccessToCartera THEN
DocPost.CheckAppliedPayableDoc(
OldVendLedgEntry,GenJnlLine."System-Created Entry");
...2 de código existente
...//Check and Move Ledger Entries to Temp
IF PurchSetup."Appln. between Currencies" = PurchSetup."Appln. between Currencies"::None THEN
OldVendLedgEntry.SETRANGE("Currency Code",NewCVLedgEntryBuf."Currency Code");
IF OldVendLedgEntry.FINDSET(FALSE,FALSE) THEN
REPEAT
IF GenJnlApply.CheckAgainstApplnCurrency(
NewCVLedgEntryBuf."Currency Code",
OldVendLedgEntry."Currency Code",
GenJnlLine."Account Type"::Vendor,
FALSE)
...Código de substituição 2
...//Check and Move Ledger Entries to Temp
IF PurchSetup."Appln. between Currencies" = PurchSetup."Appln. between Currencies"::None THEN
OldVendLedgEntry.SETRANGE("Currency Code",NewCVLedgEntryBuf."Currency Code");
IF OldVendLedgEntry.FINDSET(FALSE,FALSE) THEN
REPEAT
// Add the following line.
CheckCarteraAccessPermissions(OldVendLedgEntry."Document Situation");
// End of the added line.
IF GenJnlApply.CheckAgainstApplnCurrency(
NewCVLedgEntryBuf."Currency Code",
OldVendLedgEntry."Currency Code",
GenJnlLine."Account Type"::Vendor,
FALSE)
... -
Alterar o código de função UnapplyVendLedgEntry em geral Jnl.-lançar linha Codeunit (12) da seguinte maneira:
Código existente...DtldVendLedgEntry2.SETCURRENTKEY("Transaction No.","Vendor No.","Entry Type");
DtldVendLedgEntry2.SETRANGE("Transaction No.",DtldVendLedgEntry."Transaction No.");
DtldVendLedgEntry2.SETRANGE("Vendor No.",DtldVendLedgEntry."Vendor No.");
DtldVendLedgEntry2.SETFILTER("Entry Type",'>%1',DtldVendLedgEntry."Entry Type"::"Initial Entry");
DtldVendLedgEntry2.FINDSET;
UnapplyVATEntries := FALSE;
REPEAT
IF (DtldVendLedgEntry2."Entry Type" = DtldVendLedgEntry2."Entry Type"::"Payment Discount (VAT Adjustment)") OR
(DtldVendLedgEntry2."Entry Type" = DtldVendLedgEntry2."Entry Type"::"Payment Tolerance (VAT Adjustment)") OR
(DtldVendLedgEntry2."Entry Type" = DtldVendLedgEntry2."Entry Type"::"Payment Discount Tolerance (VAT Adjustment)")
...Código de substituição
...DtldVendLedgEntry2.SETCURRENTKEY("Transaction No.","Vendor No.","Entry Type");
DtldVendLedgEntry2.SETRANGE("Transaction No.",DtldVendLedgEntry."Transaction No.");
DtldVendLedgEntry2.SETRANGE("Vendor No.",DtldVendLedgEntry."Vendor No.");
DtldVendLedgEntry2.SETFILTER("Entry Type",'>%1',DtldVendLedgEntry."Entry Type"::"Initial Entry");
DtldVendLedgEntry2.FINDSET;
// Add the following line.
CheckCarteraAccessPermissions(DtldVendLedgEntry2."Document Situation");
// End of the added line.
UnapplyVATEntries := FALSE;
REPEAT
IF (DtldVendLedgEntry2."Entry Type" = DtldVendLedgEntry2."Entry Type"::"Payment Discount (VAT Adjustment)") OR
(DtldVendLedgEntry2."Entry Type" = DtldVendLedgEntry2."Entry Type"::"Payment Tolerance (VAT Adjustment)") OR
(DtldVendLedgEntry2."Entry Type" = DtldVendLedgEntry2."Entry Type"::"Payment Discount Tolerance (VAT Adjustment)")
... -
Alterar o código de função CheckCarteraAccessPermissions em geral Jnl.-lançar linha Codeunit (12) da seguinte maneira:
Código existente...CLEAR(GenJnlLine2);
EXIT(IsOK);
END;
BEGIN
END.
}
}
...Código de substituição
...CLEAR(GenJnlLine2);
EXIT(IsOK);
END;
// Add the following lines.
LOCAL PROCEDURE CheckCarteraAccessPermissions@1100024(DocumentSituation@1170001 : ' ,Posted BG/PO,Closed BG/PO,BG/PO,Cartera,Closed Documents');
BEGIN
IF (DocumentSituation <> DocumentSituation::" ") AND (NOT AppManagement.AccessToCartera) THEN
ERROR(Text1100013);
END;
// End of the added lines.
BEGIN
END.
}
}
...
Pré-requisitos:
Você deve ter um dos seguintes produtos instalados para aplicar esse hotfix:
-
A versão em espanhol do Microsoft Dynamics NAV 2009 R2
-
A versão em espanhol do Microsoft Dynamics NAV 2009 SP1
Informações sobre remoção
Você não pode remover esse hotfix.
Status
A Microsoft confirma que este é um problema em seus produtos listados na seção "Aplica-se a".
Observação: Este é um artigo de "PUBLICAÇÃO RÁPIDA" criado diretamente de dentro da organização de suporte da Microsoft. As informações contidas neste documento são fornecidas desta maneira, em resposta a problemas emergentes. Como um dos resultados da velocidade da publicação, os materiais podem incluir erros tipográficos e podem ser revisados a qualquer momento sem aviso prévio. Consulte os Termos de usopara outras considerações.