Desconto de encargo de produto são atribuídos a guias remessa vendas não são distribuídos em conformidade com a opção seleccionada para movimentos de valor respectivas no Microsoft Dynamics NAV 2009. Siga os passos na secção de alterações de código para resolver este problema. Este problema ocorre nos seguintes produtos:
-
Microsoft Dynamics NAV 2009 R2
-
Microsoft Dynamics NAV 2009 Service Pack 1 (SP1)
Resolução
Informações sobre correção
Agora tem uma correcção suportada disponível na Microsoft. Contudo, destina-se apenas a corrigir o problema descrito neste artigo. Aplique-a apenas em sistemas que tenham este problema específico. Esta correcção poderá ser submetida a testes adicionais. Por conseguinte, se não estiver a ser gravemente afectado por este problema, recomendamos que aguarde o próximo service pack do Microsoft Dynamics NAV 2009 ou a próxima versão do Microsoft Dynamics NAV que contenha esta correcção.
Nota Em casos especiais, os custos normalmente inerentes para suporte chamadas poderão ser anuladas se um técnico de suporte técnico do Microsoft Dynamics e produtos relacionados determina que uma actualização específica resolverá o problema. Os custos de normais do suporte serão aplicados a questões de suporte adicionais e problemas que não se enquadrem na atualização específica em questão.
Informações de instalação
A Microsoft fornece exemplos de programação apenas a título ilustrativo, sem garantia expressa ou implícita. Isto inclui, mas não está limitado a, garantias implícitas de comercialização ou adequação a um fim específico. Este artigo pressupõe que está familiarizado com a linguagem de programação que está a ser demonstrada e com as ferramentas que são utilizadas para criar e depurar procedimentos. Técnicos de suporte da Microsoft podem ajudar a explicar a funcionalidade de um determinado procedimento. No entanto, não modificarão estes exemplos para proporcionarem funcionalidades adicionais nem criarão procedimentos adaptados às necessidades específicas do utilizador.
Nota Antes de instalar esta correcção, certifique-se de que todos os utilizadores de cliente do Microsoft Dynamics NAV são registados no sistema. Isto inclui os serviços de servidor de aplicações (NAS) do Microsoft Dynamics NAV. Deve ser o único usuário do cliente que tem sessão iniciada quando implementar esta correcção.
Para implementar esta correcção, tem de ter uma licença de desenvolvedor.
Recomendamos que a conta de utilizador na janela Logins do Windows ou na janela Logins de base de dados seja atribuída a ID de função "SUPER". Se a conta de utilizador não é possível atribuir o ID de função "SUPER", tem de verificar que a conta de utilizador tem as seguintes permissões:
-
A permissão Modificar para o objecto que estará a alterar.
-
A permissão executar para o objecto 5210 de ID de objecto de sistema e para o 9015 de ID de objecto de sistema
objecto.
Nota Não tem de ter direitos para os arquivos de dados, excepto se tiver de efectuar a reparação de dados.
Alterações de código
Nota Sempre o código de ensaio corrige num ambiente controlado antes de aplicar as correcções para os computadores de produção.
Para resolver este problema, siga estes passos:
-
Altere o código nas propriedades na codeunit vendas-Post (80) do seguinte modo:
Código existente 1...PostJobContractLine(JobTaskSalesLine,TempJnlLineDim2);
END;
SalesLine.Type::"Charge (Item)":
IF Invoice OR ItemChargeAssgntOnly THEN BEGIN
// Delete the following line.
ItemJnlRollRndg := FALSE;
// End of the deleted line.
ClearItemChargeAssgntFilter;
TempItemChargeAssgntSales.SETCURRENTKEY("Applies-to Doc. Type");
TempItemChargeAssgntSales.SETRANGE("Document Line No.",SalesLine."Line No.");
IF TempItemChargeAssgntSales.FINDSET THEN
...Código de substituição 1
...PostJobContractLine(JobTaskSalesLine,TempJnlLineDim2);
END;
SalesLine.Type::"Charge (Item)":
IF Invoice OR ItemChargeAssgntOnly THEN BEGIN
// Add the following line.
ItemJnlRollRndg := TRUE;
// End of the added line.
ClearItemChargeAssgntFilter;
TempItemChargeAssgntSales.SETCURRENTKEY("Applies-to Doc. Type");
TempItemChargeAssgntSales.SETRANGE("Document Line No.",SalesLine."Line No.");
IF TempItemChargeAssgntSales.FINDSET THEN
...Código existente 2
...GenJnlLineDocNo := TempItemChargeAssgntSales."Applies-to Doc. No.";
CASE TempItemChargeAssgntSales."Applies-to Doc. Type" OF
TempItemChargeAssgntSales."Applies-to Doc. Type"::Shipment:
BEGIN
// Delete the following line.
PostItemChargePerShpt(SalesLine);
TempItemChargeAssgntSales.MARK(TRUE);
END;
TempItemChargeAssgntSales."Applies-to Doc. Type"::"Return Receipt":
BEGIN
...Código de substituição 2
...GenJnlLineDocNo := TempItemChargeAssgntSales."Applies-to Doc. No.";
CASE TempItemChargeAssgntSales."Applies-to Doc. Type" OF
TempItemChargeAssgntSales."Applies-to Doc. Type"::Shipment:
BEGIN
// Add the following lines.
PostItemChargePerShpt(SalesLine,SalesLine."Inv. Discount Amount",
SalesLine.Quantity,SalesLine."Line Discount Amount",SalesLine."Line Amount");
// End of the added lines.
TempItemChargeAssgntSales.MARK(TRUE);
END;
TempItemChargeAssgntSales."Applies-to Doc. Type"::"Return Receipt":
BEGIN
...Código existente 3
...TempItemChargeAssgntSales.MARK(TRUE);
END;
TempItemChargeAssgntSales."Applies-to Doc. Type"::"Return Receipt":
BEGIN
// Delete the following line.
PostItemChargePerRetRcpt(SalesLine);
TempItemChargeAssgntSales.MARK(TRUE);
END;
TempItemChargeAssgntSales."Applies-to Doc. Type"::Order,
TempItemChargeAssgntSales."Applies-to Doc. Type"::Invoice:
...Código de substituição 3
...TempItemChargeAssgntSales.MARK(TRUE);
END;
TempItemChargeAssgntSales."Applies-to Doc. Type"::"Return Receipt":
BEGIN
// Add the following lines.
PostItemChargePerRetRcpt(SalesLine,SalesLine."Inv. Discount Amount",
SalesLine.Quantity,SalesLine."Line Discount Amount",SalesLine."Line Amount");
// End of the added lines.
TempItemChargeAssgntSales.MARK(TRUE);
END;
TempItemChargeAssgntSales."Applies-to Doc. Type"::Order,
TempItemChargeAssgntSales."Applies-to Doc. Type"::Invoice:
... -
Altere o código na função PostItemChargePerShpt na codeunit vendas-Post (80) do seguinte modo:
Código existente 1...END;
END;
END;
// Delete the following line.
LOCAL PROCEDURE PostItemChargePerShpt@5807(SalesLine@1000 : Record 37);
VAR
SalesShptLine@1003 : Record 111;
TempItemLedgEntry@1010 : TEMPORARY Record 32;
ItemTrackingMgt@1009 : Codeunit 6500;
...Código de substituição 1
...END;
END;
END;
// Add the following line.
LOCAL PROCEDURE PostItemChargePerShpt@5807(SalesLine@1000 : Record 37;VAR TotalInvDiscAmtRemaining@1012 : Decimal;VAR TotalQtyRemaining@1013 : Decimal;VAR TotalLineDiscAmtRemaining@1014 : Decimal;VAR TotalLineAmtRemaining@1015 : Decimal);
VAR
SalesShptLine@1003 : Record 111;
TempItemLedgEntry@1010 : TEMPORARY Record 32;
ItemTrackingMgt@1009 : Codeunit 6500;
...Código existente 2
...AmountToAssign := ROUND(NonDistrAmountToAssign * Factor,GLSetup."Amount Rounding Precision");
IF Factor < 1 THEN BEGIN
PostItemCharge(SalesLine,
TempItemLedgEntry."Entry No.",ABS(TempItemLedgEntry.Quantity),
// Delete the following line.
AmountToAssign,QtyToAssign);
NonDistrQuantity := NonDistrQuantity - ABS(TempItemLedgEntry.Quantity);
NonDistrQtyToAssign := NonDistrQtyToAssign - QtyToAssign;
NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
...Código de substituição 2
...AmountToAssign := ROUND(NonDistrAmountToAssign * Factor,GLSetup."Amount Rounding Precision");
IF Factor < 1 THEN BEGIN
PostItemCharge(SalesLine,
TempItemLedgEntry."Entry No.",ABS(TempItemLedgEntry.Quantity),
// Add the following lines.
AmountToAssign,QtyToAssign,TotalInvDiscAmtRemaining,
TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining);
// End of the added lines.
NonDistrQuantity := NonDistrQuantity - ABS(TempItemLedgEntry.Quantity);
NonDistrQtyToAssign := NonDistrQtyToAssign - QtyToAssign;
NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
...Código existente 3
...NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
PostItemCharge(SalesLine,
TempItemLedgEntry."Entry No.",ABS(TempItemLedgEntry.Quantity),
// Delete the following line.
NonDistrAmountToAssign,NonDistrQtyToAssign);
UNTIL TempItemLedgEntry.NEXT = 0;
END ELSE
PostItemCharge(SalesLine,
SalesShptLine."Item Shpt. Entry No.",SalesShptLine."Quantity (Base)",
...Código de substituição 3
...NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
PostItemCharge(SalesLine,
TempItemLedgEntry."Entry No.",ABS(TempItemLedgEntry.Quantity),
// Add the following lines.
NonDistrAmountToAssign,NonDistrQtyToAssign,TotalInvDiscAmtRemaining,
TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining);
// End of the added lines.
UNTIL TempItemLedgEntry.NEXT = 0;
END ELSE
PostItemCharge(SalesLine,
SalesShptLine."Item Shpt. Entry No.",SalesShptLine."Quantity (Base)",
...Código existente 4
...END ELSE
PostItemCharge(SalesLine,
SalesShptLine."Item Shpt. Entry No.",SalesShptLine."Quantity (Base)",
TempItemChargeAssgntSales."Amount to Assign",
// Delete the following lines.
TempItemChargeAssgntSales."Qty. to Assign");
END;
LOCAL PROCEDURE PostItemChargePerRetRcpt@5810(SalesLine@1000 : Record 37);
// End of the deleted lines.
VAR
ReturnRcptLine@1002 : Record 6661;
TempItemLedgEntry@1010 : TEMPORARY Record 32;
ItemTrackingMgt@1009 : Codeunit 6500;
...Código de substituição 4
...END ELSE
PostItemCharge(SalesLine,
SalesShptLine."Item Shpt. Entry No.",SalesShptLine."Quantity (Base)",
TempItemChargeAssgntSales."Amount to Assign",
// Add the following lines.
TempItemChargeAssgntSales."Qty. to Assign",TotalInvDiscAmtRemaining,
TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining);
END;
LOCAL PROCEDURE PostItemChargePerRetRcpt@5810(SalesLine@1000 : Record 37;VAR TotalInvDiscAmtRemaining@1012 : Decimal;VAR TotalQtyRemaining@1013 : Decimal;VAR TotalLineDiscAmtRemaining@1014 : Decimal;VAR TotalLineAmtRemaining@1015 : Decimal);
// End of the added lines.
VAR
ReturnRcptLine@1002 : Record 6661;
TempItemLedgEntry@1010 : TEMPORARY Record 32;
ItemTrackingMgt@1009 : Codeunit 6500;
... -
Altere o código na função PostItemChargePerRetRcpt na codeunit vendas-Post (80) do seguinte modo:
Código existente 1...AmountToAssign := ROUND(NonDistrAmountToAssign * Factor,GLSetup."Amount Rounding Precision");
IF Factor < 1 THEN BEGIN
PostItemCharge(SalesLine,
TempItemLedgEntry."Entry No.",ABS(TempItemLedgEntry.Quantity),
// Delete the following line.
AmountToAssign,QtyToAssign);
NonDistrQuantity := NonDistrQuantity - ABS(TempItemLedgEntry.Quantity);
NonDistrQtyToAssign := NonDistrQtyToAssign - QtyToAssign;
NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
...Código de substituição 1
...AmountToAssign := ROUND(NonDistrAmountToAssign * Factor,GLSetup."Amount Rounding Precision");
IF Factor < 1 THEN BEGIN
PostItemCharge(SalesLine,
TempItemLedgEntry."Entry No.",ABS(TempItemLedgEntry.Quantity),
// Add the following lines.
AmountToAssign,QtyToAssign,TotalInvDiscAmtRemaining,
TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining);
// End of the added lines.
NonDistrQuantity := NonDistrQuantity - ABS(TempItemLedgEntry.Quantity);
NonDistrQtyToAssign := NonDistrQtyToAssign - QtyToAssign;
NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
...Código existente 2
...NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
PostItemCharge(SalesLine,
TempItemLedgEntry."Entry No.",ABS(TempItemLedgEntry.Quantity),
// Delete the following line.
NonDistrAmountToAssign,NonDistrQtyToAssign);
UNTIL TempItemLedgEntry.NEXT = 0;
END ELSE
PostItemCharge(SalesLine,
ReturnRcptLine."Item Rcpt. Entry No.",ReturnRcptLine."Quantity (Base)",
...Código de substituição 2
...NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
PostItemCharge(SalesLine,
TempItemLedgEntry."Entry No.",ABS(TempItemLedgEntry.Quantity),
// Add the following lines.
NonDistrAmountToAssign,NonDistrQtyToAssign,TotalInvDiscAmtRemaining,
TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining);
// End of the added lines.
UNTIL TempItemLedgEntry.NEXT = 0;
END ELSE
PostItemCharge(SalesLine,
ReturnRcptLine."Item Rcpt. Entry No.",ReturnRcptLine."Quantity (Base)",
...Código existente 3
...END ELSE
PostItemCharge(SalesLine,
ReturnRcptLine."Item Rcpt. Entry No.",ReturnRcptLine."Quantity (Base)",
TempItemChargeAssgntSales."Amount to Assign",
// Delete the following line.
TempItemChargeAssgntSales."Qty. to Assign")
END;
LOCAL PROCEDURE PostAssocItemJnlLine@3(QtyToBeShipped@1000 : Decimal;QtyToBeShippedBase@1001 : Decimal) : Integer;
VAR
...Código de substituição 3
...END ELSE
PostItemCharge(SalesLine,
ReturnRcptLine."Item Rcpt. Entry No.",ReturnRcptLine."Quantity (Base)",
TempItemChargeAssgntSales."Amount to Assign",
// Add the following lines.
TempItemChargeAssgntSales."Qty. to Assign",TotalInvDiscAmtRemaining,
TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining)
// End of the added lines.
END;
LOCAL PROCEDURE PostAssocItemJnlLine@3(QtyToBeShipped@1000 : Decimal;QtyToBeShippedBase@1001 : Decimal) : Integer;
VAR
... -
Altere o código na função PostItemCharge na codeunit vendas-Post (80) do seguinte modo:
Código existente 1...TempValueEntryRelation.DELETEALL;
END;
END;
// Delete the following line.
PROCEDURE PostItemCharge@42(SalesLine@1005 : Record 37;ItemEntryNo@1004 : Integer;QuantityBase@1003 : Decimal;AmountToAssign@1002 : Decimal;QtyToAssign@1001 : Decimal);
VAR
DummyTrackingSpecification@1000 : Record 336;
BEGIN
WITH TempItemChargeAssgntSales DO BEGIN
...Código de substituição 1
...TempValueEntryRelation.DELETEALL;
END;
END;
// Add the following line.
PROCEDURE PostItemCharge@42(SalesLine@1005 : Record 37;ItemEntryNo@1004 : Integer;QuantityBase@1003 : Decimal;AmountToAssign@1002 : Decimal;QtyToAssign@1001 : Decimal;VAR TotalInvDiscAmtRemaining@1006 : Decimal;VAR TotalQtyRemaining@1007 : Decimal;VAR TotalLineDiscAmtRemaining@1008 : Decimal;VAR TotalLineAmtRemaining@1009 : Decimal);
VAR
DummyTrackingSpecification@1000 : Record 336;
BEGIN
WITH TempItemChargeAssgntSales DO BEGIN
...Código existente 2
...SalesLine.Amount :=
CurrExchRate.ExchangeAmtFCYToLCY(
UseDate,SalesHeader."Currency Code",TotalChargeAmt,SalesHeader."Currency Factor");
SalesLine."Inv. Discount Amount" := ROUND(
// Delete the following lines.
SalesLine."Inv. Discount Amount" / SalesLine.Quantity * QtyToAssign,
GLSetup."Amount Rounding Precision");
// End of the deleted lines.
SalesLine.Amount := ROUND(SalesLine.Amount,GLSetup."Amount Rounding Precision") - TotalChargeAmtLCY;
IF SalesHeader."Currency Code" <> '' THEN
TotalChargeAmtLCY := TotalChargeAmtLCY + SalesLine.Amount;
SalesLine."Unit Cost (LCY)" := ROUND(
...Código de substituição 2
...SalesLine.Amount :=
CurrExchRate.ExchangeAmtFCYToLCY(
UseDate,SalesHeader."Currency Code",TotalChargeAmt,SalesHeader."Currency Factor");
SalesLine."Inv. Discount Amount" := ROUND(
// Add the following lines.
TotalInvDiscAmtRemaining / TotalQtyRemaining * QtyToAssign,
GLSetup."Amount Rounding Precision");
SalesLine."Line Discount Amount" := ROUND(
TotalLineDiscAmtRemaining / TotalQtyRemaining * QtyToAssign,
GLSetup."Amount Rounding Precision");
SalesLine."Line Amount" := ROUND(
TotalLineAmtRemaining / TotalQtyRemaining * QtyToAssign,
GLSetup."Amount Rounding Precision");
TotalInvDiscAmtRemaining := TotalInvDiscAmtRemaining - SalesLine."Inv. Discount Amount";
TotalLineDiscAmtRemaining := TotalLineDiscAmtRemaining - SalesLine."Line Discount Amount";
TotalLineAmtRemaining := TotalLineAmtRemaining - SalesLine."Line Amount";
TotalQtyRemaining := TotalQtyRemaining - QtyToAssign;
// End of the added lines.
SalesLine.Amount := ROUND(SalesLine.Amount,GLSetup."Amount Rounding Precision") - TotalChargeAmtLCY;
IF SalesHeader."Currency Code" <> '' THEN
TotalChargeAmtLCY := TotalChargeAmtLCY + SalesLine.Amount;
SalesLine."Unit Cost (LCY)" := ROUND(
... -
Alterar o código nas propriedades do thePurch.-registar codeunit (90) do seguinte modo:
Código existente 1...3:
ERROR(Text015);
PurchLine.Type::"Charge (Item)":
IF Invoice OR ItemChargeAssgntOnly THEN BEGIN
// Delete the following line.
ItemJnlRollRndg := FALSE;
ClearItemChargeAssgntFilter;
TempItemChargeAssgntPurch.SETCURRENTKEY("Applies-to Doc. Type");
TempItemChargeAssgntPurch.SETRANGE("Document Line No.",PurchLine."Line No.");
IF TempItemChargeAssgntPurch.FINDSET THEN
...Código de substituição 1
...3:
ERROR(Text015);
PurchLine.Type::"Charge (Item)":
IF Invoice OR ItemChargeAssgntOnly THEN BEGIN
// Add the following line.
ItemJnlRollRndg := TRUE;
ClearItemChargeAssgntFilter;
TempItemChargeAssgntPurch.SETCURRENTKEY("Applies-to Doc. Type");
TempItemChargeAssgntPurch.SETRANGE("Document Line No.",PurchLine."Line No.");
IF TempItemChargeAssgntPurch.FINDSET THEN
...Código existente 2
...GenJnlLineDocNo := TempItemChargeAssgntPurch."Applies-to Doc. No.";
CASE TempItemChargeAssgntPurch."Applies-to Doc. Type" OF
TempItemChargeAssgntPurch."Applies-to Doc. Type"::Receipt:
BEGIN
// Delete the following line.
PostItemChargePerRcpt(PurchLine);
TempItemChargeAssgntPurch.MARK(TRUE);
END;
TempItemChargeAssgntPurch."Applies-to Doc. Type"::"Transfer Receipt":
BEGIN
...Código de substituição 2
...GenJnlLineDocNo := TempItemChargeAssgntPurch."Applies-to Doc. No.";
CASE TempItemChargeAssgntPurch."Applies-to Doc. Type" OF
TempItemChargeAssgntPurch."Applies-to Doc. Type"::Receipt:
BEGIN
// Add the following lines.
PostItemChargePerRcpt(PurchLine,PurchLine."Inv. Discount Amount",
PurchLine.Quantity,PurchLine."Line Discount Amount",PurchLine."Line Amount");
// End of the added lines.
TempItemChargeAssgntPurch.MARK(TRUE);
END;
TempItemChargeAssgntPurch."Applies-to Doc. Type"::"Transfer Receipt":
BEGIN
...Código existente 3
...TempItemChargeAssgntPurch.MARK(TRUE);
END;
TempItemChargeAssgntPurch."Applies-to Doc. Type"::"Transfer Receipt":
BEGIN
// Delete the following line.
PostItemChargePerTransfer(PurchLine);
TempItemChargeAssgntPurch.MARK(TRUE);
END;
TempItemChargeAssgntPurch."Applies-to Doc. Type"::"Return Shipment":
BEGIN
...Código de substituição 3
...TempItemChargeAssgntPurch.MARK(TRUE);
END;
TempItemChargeAssgntPurch."Applies-to Doc. Type"::"Transfer Receipt":
BEGIN
// Add the following lines.
PostItemChargePerTransfer(PurchLine,PurchLine."Inv. Discount Amount",
PurchLine.Quantity,PurchLine."Line Discount Amount",PurchLine."Line Amount");
// End of the added lines.
TempItemChargeAssgntPurch.MARK(TRUE);
END;
TempItemChargeAssgntPurch."Applies-to Doc. Type"::"Return Shipment":
BEGIN
...Código existente 4
...TempItemChargeAssgntPurch.MARK(TRUE);
END;
TempItemChargeAssgntPurch."Applies-to Doc. Type"::"Return Shipment":
BEGIN
// Delete the following line.
PostItemChargePerRetShpt(PurchLine);
TempItemChargeAssgntPurch.MARK(TRUE);
END;
TempItemChargeAssgntPurch."Applies-to Doc. Type"::"Sales Shipment":
BEGIN
...Código de substituição 4
...TempItemChargeAssgntPurch.MARK(TRUE);
END;
TempItemChargeAssgntPurch."Applies-to Doc. Type"::"Return Shipment":
BEGIN
// Add the following lines.
PostItemChargePerRetShpt(PurchLine,PurchLine."Inv. Discount Amount",
PurchLine.Quantity,PurchLine."Line Discount Amount",PurchLine."Line Amount");
// End of the added lines.
TempItemChargeAssgntPurch.MARK(TRUE);
END;
TempItemChargeAssgntPurch."Applies-to Doc. Type"::"Sales Shipment":
BEGIN
...Código existente 5
...TempItemChargeAssgntPurch.MARK(TRUE);
END;
TempItemChargeAssgntPurch."Applies-to Doc. Type"::"Sales Shipment":
BEGIN
// Delete the following line.
PostItemChargePerSalesShpt(PurchLine);
TempItemChargeAssgntPurch.MARK(TRUE);
END;
TempItemChargeAssgntPurch."Applies-to Doc. Type"::"Return Receipt":
BEGIN
...Código de substituição 5
...TempItemChargeAssgntPurch.MARK(TRUE);
END;
TempItemChargeAssgntPurch."Applies-to Doc. Type"::"Sales Shipment":
BEGIN
// Add the following lines.
PostItemChargePerSalesShpt(PurchLine,PurchLine."Inv. Discount Amount",
PurchLine.Quantity,PurchLine."Line Discount Amount",PurchLine."Line Amount");
// End of the added lines.
TempItemChargeAssgntPurch.MARK(TRUE);
END;
TempItemChargeAssgntPurch."Applies-to Doc. Type"::"Return Receipt":
BEGIN
...Código existente 6
...TempItemChargeAssgntPurch.MARK(TRUE);
END;
TempItemChargeAssgntPurch."Applies-to Doc. Type"::"Return Receipt":
BEGIN
// Delete the following line.
PostItemChargePerRetRcpt(PurchLine);
TempItemChargeAssgntPurch.MARK(TRUE);
END;
TempItemChargeAssgntPurch."Applies-to Doc. Type"::Order,
TempItemChargeAssgntPurch."Applies-to Doc. Type"::Invoice:
...Código de substituição 6
...TempItemChargeAssgntPurch.MARK(TRUE);
END;
TempItemChargeAssgntPurch."Applies-to Doc. Type"::"Return Receipt":
BEGIN
// Add the following lines.
PostItemChargePerRetRcpt(PurchLine,PurchLine."Inv. Discount Amount",
PurchLine.Quantity,PurchLine."Line Discount Amount",PurchLine."Line Amount");
// End of the added lines.
TempItemChargeAssgntPurch.MARK(TRUE);
END;
TempItemChargeAssgntPurch."Applies-to Doc. Type"::Order,
TempItemChargeAssgntPurch."Applies-to Doc. Type"::Invoice:
... -
Alterar o código de função PostItemChargePerRcpt na thePurch.-registar codeunit (90) do seguinte modo:
Código existente 1...END;
END;
END;
// Delete the following line.
LOCAL PROCEDURE PostItemChargePerRcpt@5807(PurchLine@1000 : Record 39);
VAR
PurchRcptLine@1002 : Record 121;
TempItemLedgEntry@1003 : TEMPORARY Record 32;
ItemTrackingMgt@1005 : Codeunit 6500;
...Código de substituição 1
...END;
END;
END;
// Add the following line.
LOCAL PROCEDURE PostItemChargePerRcpt@5807(PurchLine@1000 : Record 39;VAR TotalInvDiscAmtRemaining@1012 : Decimal;VAR TotalQtyRemaining@1013 : Decimal;VAR TotalLineDiscAmtRemaining@1014 : Decimal;VAR TotalLineAmtRemaining@1015 : Decimal);
VAR
PurchRcptLine@1002 : Record 121;
TempItemLedgEntry@1003 : TEMPORARY Record 32;
ItemTrackingMgt@1005 : Codeunit 6500;
...Código existente 2
...AmountToAssign := ROUND(NonDistrAmountToAssign * Factor,GLSetup."Amount Rounding Precision");
IF Factor < 1 THEN BEGIN
PostItemCharge(PurchLine,
TempItemLedgEntry."Entry No.",TempItemLedgEntry.Quantity,
// Delete the following line.
AmountToAssign * Sign,QtyToAssign,PurchRcptLine."Indirect Cost %");
NonDistrQuantity := NonDistrQuantity - TempItemLedgEntry.Quantity;
NonDistrQtyToAssign := NonDistrQtyToAssign - QtyToAssign;
NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
...Código de substituição 2
...AmountToAssign := ROUND(NonDistrAmountToAssign * Factor,GLSetup."Amount Rounding Precision");
IF Factor < 1 THEN BEGIN
PostItemCharge(PurchLine,
TempItemLedgEntry."Entry No.",TempItemLedgEntry.Quantity,
// Add the following lines.
AmountToAssign * Sign,QtyToAssign,PurchRcptLine."Indirect Cost %",
TotalInvDiscAmtRemaining,TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining);
// End of the added lines.
NonDistrQuantity := NonDistrQuantity - TempItemLedgEntry.Quantity;
NonDistrQtyToAssign := NonDistrQtyToAssign - QtyToAssign;
NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
...Código existente 3
...NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
PostItemCharge(PurchLine,
TempItemLedgEntry."Entry No.",TempItemLedgEntry.Quantity,
// Delete the following line.
NonDistrAmountToAssign * Sign,NonDistrQtyToAssign,PurchRcptLine."Indirect Cost %");
UNTIL TempItemLedgEntry.NEXT = 0;
END ELSE
ERROR(Text042)
ELSE
...Código de substituição 3
...NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
PostItemCharge(PurchLine,
TempItemLedgEntry."Entry No.",TempItemLedgEntry.Quantity,
// Add the following lines.
NonDistrAmountToAssign * Sign,NonDistrQtyToAssign,PurchRcptLine."Indirect Cost %",
TotalInvDiscAmtRemaining,TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining);
// End of the added lines.
UNTIL TempItemLedgEntry.NEXT = 0;
END ELSE
ERROR(Text042)
ELSE
...Código existente 4
...PostItemCharge(PurchLine,
PurchRcptLine."Item Rcpt. Entry No.",PurchRcptLine."Quantity (Base)",
TempItemChargeAssgntPurch."Amount to Assign" * Sign,
TempItemChargeAssgntPurch."Qty. to Assign",
// Delete the following lines.
PurchRcptLine."Indirect Cost %");
END;
LOCAL PROCEDURE PostItemChargePerRetShpt@5811(PurchLine@1000 : Record 39);
// End of the deleted lines.
VAR
ReturnShptLine@1002 : Record 6651;
TempItemLedgEntry@1010 : TEMPORARY Record 32;
ItemTrackingMgt@1009 : Codeunit 6500;
...Código de substituição 4
...PostItemCharge(PurchLine,
PurchRcptLine."Item Rcpt. Entry No.",PurchRcptLine."Quantity (Base)",
TempItemChargeAssgntPurch."Amount to Assign" * Sign,
TempItemChargeAssgntPurch."Qty. to Assign",
// Add the following lines.
PurchRcptLine."Indirect Cost %",TotalInvDiscAmtRemaining,
TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining);
END;
LOCAL PROCEDURE PostItemChargePerRetShpt@5811(PurchLine@1000 : Record 39;VAR TotalInvDiscAmtRemaining@1012 : Decimal;VAR TotalQtyRemaining@1013 : Decimal;VAR TotalLineDiscAmtRemaining@1014 : Decimal;VAR TotalLineAmtRemaining@1015 : Decimal);
// End of the added lines.
VAR
ReturnShptLine@1002 : Record 6651;
TempItemLedgEntry@1010 : TEMPORARY Record 32;
ItemTrackingMgt@1009 : Codeunit 6500;
... -
Alterar o código de função PostItemChargePerRetShpt na thePurch.-registar codeunit (90) do seguinte modo:
Código existente 1...AmountToAssign := ROUND(NonDistrAmountToAssign * Factor,GLSetup."Amount Rounding Precision");
IF Factor < 1 THEN BEGIN
PostItemCharge(PurchLine,
TempItemLedgEntry."Entry No.",TempItemLedgEntry.Quantity,
// Delete the following line.
AmountToAssign * Sign,QtyToAssign,ReturnShptLine."Indirect Cost %");
NonDistrQuantity := NonDistrQuantity - TempItemLedgEntry.Quantity;
NonDistrQtyToAssign := NonDistrQtyToAssign - QtyToAssign;
NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
...Código de substituição 1
...AmountToAssign := ROUND(NonDistrAmountToAssign * Factor,GLSetup."Amount Rounding Precision");
IF Factor < 1 THEN BEGIN
PostItemCharge(PurchLine,
TempItemLedgEntry."Entry No.",TempItemLedgEntry.Quantity,
// Add the following lines.
AmountToAssign * Sign,QtyToAssign,ReturnShptLine."Indirect Cost %",TotalInvDiscAmtRemaining,
TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining);
// End of the added lines.
NonDistrQuantity := NonDistrQuantity - TempItemLedgEntry.Quantity;
NonDistrQtyToAssign := NonDistrQtyToAssign - QtyToAssign;
NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
...Código existente 2
...NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
PostItemCharge(PurchLine,
TempItemLedgEntry."Entry No.",TempItemLedgEntry.Quantity,
// Delete the following line.
NonDistrAmountToAssign * Sign,NonDistrQtyToAssign,ReturnShptLine."Indirect Cost %");
UNTIL TempItemLedgEntry.NEXT = 0;
END ELSE
ERROR(Text042)
ELSE
...Código de substituição 2
...NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
PostItemCharge(PurchLine,
TempItemLedgEntry."Entry No.",TempItemLedgEntry.Quantity,
// Add the following lines.
NonDistrAmountToAssign * Sign,NonDistrQtyToAssign,ReturnShptLine."Indirect Cost %",TotalInvDiscAmtRemaining,
TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining);
// End of the added lines.
UNTIL TempItemLedgEntry.NEXT = 0;
END ELSE
ERROR(Text042)
ELSE
...Código existente 3
...PostItemCharge(PurchLine,
ReturnShptLine."Item Shpt. Entry No.",-ReturnShptLine."Quantity (Base)",
ABS(TempItemChargeAssgntPurch."Amount to Assign") * Sign,
TempItemChargeAssgntPurch."Qty. to Assign",
// Delete the following lines.
ReturnShptLine."Indirect Cost %");
END;
LOCAL PROCEDURE PostItemChargePerTransfer@23(PurchLine@1000 : Record 39);
// End of the deleted lines.
VAR
TransRcptLine@1002 : Record 5747;
ItemApplnEntry@1003 : Record 339;
DummyTrackingSpecification@1001 : Record 336;
...Código de substituição 3
...PostItemCharge(PurchLine,
ReturnShptLine."Item Shpt. Entry No.",-ReturnShptLine."Quantity (Base)",
ABS(TempItemChargeAssgntPurch."Amount to Assign") * Sign,
TempItemChargeAssgntPurch."Qty. to Assign",
// Add the following lines.
ReturnShptLine."Indirect Cost %",TotalInvDiscAmtRemaining,
TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining);
END;
LOCAL PROCEDURE PostItemChargePerTransfer@23(PurchLine@1000 : Record 39;VAR TotalInvDiscAmtRemaining@1016 : Decimal;VAR TotalQtyRemaining@1017 : Decimal;VAR TotalLineDiscAmtRemaining@1018 : Decimal;VAR TotalLineAmtRemaining@1019 : Decimal);
// End of the added lines.
VAR
TransRcptLine@1002 : Record 5747;
ItemApplnEntry@1003 : Record 339;
DummyTrackingSpecification@1001 : Record 336;
... -
Alterar o código de função PostItemChargePerTransfer na thePurch.-registar codeunit (90) do seguinte modo
Código existente...PurchLine."Bin Code" := '';
PurchLine."Line No." := "Document Line No.";
IF TransRcptLine."Item Rcpt. Entry No." = 0 THEN
// Delete the following line.
PostItemChargePerITTransfer(PurchLine,TransRcptLine)
ELSE BEGIN
TotalAmountToPostFCY := "Amount to Assign";
IF PurchHeader."Currency Code" <> '' THEN
TotalAmountToPostLCY :=
...Código de substituição
...PurchLine."Bin Code" := '';
PurchLine."Line No." := "Document Line No.";
IF TransRcptLine."Item Rcpt. Entry No." = 0 THEN
// Add the following lines.
PostItemChargePerITTransfer(PurchLine,TransRcptLine,TotalInvDiscAmtRemaining,
TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining)
// End of the added lines.
ELSE BEGIN
TotalAmountToPostFCY := "Amount to Assign";
IF PurchHeader."Currency Code" <> '' THEN
TotalAmountToPostLCY :=
... -
Alterar o código de função PostItemChargePerITTransfer na thePurch.-registar codeunit (90) do seguinte modo:
Código existente 1...END;
END;
END;
// Delete the following line.
LOCAL PROCEDURE PostItemChargePerITTransfer@43(PurchLine@1000 : Record 39;TransRcptLine@1017 : Record 5747);
VAR
TempItemLedgEntry@1016 : TEMPORARY Record 32;
ItemTrackingMgt@1001 : Codeunit 6500;
Factor@1023 : Decimal;
...Código de substituição 1
...END;
END;
END;
// Add the following line.
LOCAL PROCEDURE PostItemChargePerITTransfer@43(PurchLine@1000 : Record 39;TransRcptLine@1017 : Record 5747;VAR TotalInvDiscAmtRemaining@1026 : Decimal;VAR TotalQtyRemaining@1024 : Decimal;VAR TotalLineDiscAmtRemaining@1025 : Decimal;VAR TotalLineAmtRemaining@1030 : Decimal);
VAR
TempItemLedgEntry@1016 : TEMPORARY Record 32;
ItemTrackingMgt@1001 : Codeunit 6500;
Factor@1023 : Decimal;
...Código existente 2
...AmountToAssign := ROUND(NonDistrAmountToAssign * Factor,GLSetup."Amount Rounding Precision");
IF Factor < 1 THEN BEGIN
PostItemCharge(PurchLine,
TempItemLedgEntry."Entry No.",TempItemLedgEntry.Quantity,
// Delete the following line.
AmountToAssign,QtyToAssign,0);
NonDistrQuantity := NonDistrQuantity - TempItemLedgEntry.Quantity;
NonDistrQtyToAssign := NonDistrQtyToAssign - QtyToAssign;
NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
...Código de substituição 2
...AmountToAssign := ROUND(NonDistrAmountToAssign * Factor,GLSetup."Amount Rounding Precision");
IF Factor < 1 THEN BEGIN
PostItemCharge(PurchLine,
TempItemLedgEntry."Entry No.",TempItemLedgEntry.Quantity,
// Add the following lines.
AmountToAssign,QtyToAssign,0,TotalInvDiscAmtRemaining,
TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining);
// End of the added lines.
NonDistrQuantity := NonDistrQuantity - TempItemLedgEntry.Quantity;
NonDistrQtyToAssign := NonDistrQtyToAssign - QtyToAssign;
NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
...Código existente 3
...NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
PostItemCharge(PurchLine,
TempItemLedgEntry."Entry No.",TempItemLedgEntry.Quantity,
// Delete the following line.
NonDistrAmountToAssign,NonDistrQtyToAssign,0);
UNTIL TempItemLedgEntry.NEXT = 0;
END ELSE
ERROR(Text042);
END;
...Código de substituição 3
...NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
PostItemCharge(PurchLine,
TempItemLedgEntry."Entry No.",TempItemLedgEntry.Quantity,
// Add the following lines.
NonDistrAmountToAssign,NonDistrQtyToAssign,0,TotalInvDiscAmtRemaining,
TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining);
// End of the added lines.
UNTIL TempItemLedgEntry.NEXT = 0;
END ELSE
ERROR(Text042);
END;
... -
Alterar o código de função PostItemChargePerSalesShpt na thePurch.-registar codeunit (90) do seguinte modo:
Código existente 1...ERROR(Text042);
END;
END;
// Delete the following line.
LOCAL PROCEDURE PostItemChargePerSalesShpt@41(PurchLine@1000 : Record 39);
VAR
SalesShptLine@1002 : Record 111;
TempItemLedgEntry@1010 : TEMPORARY Record 32;
ItemTrackingMgt@1009 : Codeunit 6500;
...Código de substituição 1
...ERROR(Text042);
END;
END;
// Add the following line.
LOCAL PROCEDURE PostItemChargePerSalesShpt@41(PurchLine@1000 : Record 39;VAR TotalInvDiscAmtRemaining@1012 : Decimal;VAR TotalQtyRemaining@1013 : Decimal;VAR TotalLineDiscAmtRemaining@1014 : Decimal;VAR TotalLineAmtRemaining@1015 : Decimal);
VAR
SalesShptLine@1002 : Record 111;
TempItemLedgEntry@1010 : TEMPORARY Record 32;
ItemTrackingMgt@1009 : Codeunit 6500;
...Código existente 2
...AmountToAssign := ROUND(NonDistrAmountToAssign * Factor,GLSetup."Amount Rounding Precision");
IF Factor < 1 THEN BEGIN
PostItemCharge(PurchLine,
TempItemLedgEntry."Entry No.",TempItemLedgEntry.Quantity,
// Delete the following line.
AmountToAssign * Sign,QtyToAssign,0);
NonDistrQuantity := NonDistrQuantity - TempItemLedgEntry.Quantity;
NonDistrQtyToAssign := NonDistrQtyToAssign - QtyToAssign;
NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
...Código de substituição 2
...AmountToAssign := ROUND(NonDistrAmountToAssign * Factor,GLSetup."Amount Rounding Precision");
IF Factor < 1 THEN BEGIN
PostItemCharge(PurchLine,
TempItemLedgEntry."Entry No.",TempItemLedgEntry.Quantity,
// Add the following lines.
AmountToAssign * Sign,QtyToAssign,0,TotalInvDiscAmtRemaining,
TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining);
// End of the added lines.
NonDistrQuantity := NonDistrQuantity - TempItemLedgEntry.Quantity;
NonDistrQtyToAssign := NonDistrQtyToAssign - QtyToAssign;
NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
...Código existente 3
...NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
PostItemCharge(PurchLine,
TempItemLedgEntry."Entry No.",TempItemLedgEntry.Quantity,
// Delete the following line.
NonDistrAmountToAssign * Sign,NonDistrQtyToAssign,0);
UNTIL TempItemLedgEntry.NEXT = 0;
END ELSE
ERROR(Text042)
ELSE
...Código de substituição 3
...NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
PostItemCharge(PurchLine,
TempItemLedgEntry."Entry No.",TempItemLedgEntry.Quantity,
// Add the following lines.
NonDistrAmountToAssign * Sign,NonDistrQtyToAssign,0,TotalInvDiscAmtRemaining,
TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining);
// End of the added lines.
UNTIL TempItemLedgEntry.NEXT = 0;
END ELSE
ERROR(Text042)
ELSE
...Código existente 4
...ELSE
PostItemCharge(PurchLine,
SalesShptLine."Item Shpt. Entry No.",-SalesShptLine."Quantity (Base)",
TempItemChargeAssgntPurch."Amount to Assign" * Sign,
// Delete the following lines.
TempItemChargeAssgntPurch."Qty. to Assign",0)
END;
PROCEDURE PostItemChargePerRetRcpt@37(PurchLine@1001 : Record 39);
// End of the deleted lines.
VAR
ReturnRcptLine@1000 : Record 6661;
TempItemLedgEntry@1011 : TEMPORARY Record 32;
ItemTrackingMgt@1010 : Codeunit 6500;
...Código de substituição 4
...ELSE
PostItemCharge(PurchLine,
SalesShptLine."Item Shpt. Entry No.",-SalesShptLine."Quantity (Base)",
TempItemChargeAssgntPurch."Amount to Assign" * Sign,
// Add the following lines.
TempItemChargeAssgntPurch."Qty. to Assign",0,TotalInvDiscAmtRemaining,
TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining)
END;
PROCEDURE PostItemChargePerRetRcpt@37(PurchLine@1001 : Record 39;VAR TotalInvDiscAmtRemaining@1012 : Decimal;VAR TotalQtyRemaining@1013 : Decimal;VAR TotalLineDiscAmtRemaining@1014 : Decimal;VAR TotalLineAmtRemaining@1015 : Decimal);
// End of the added lines.
VAR
ReturnRcptLine@1000 : Record 6661;
TempItemLedgEntry@1011 : TEMPORARY Record 32;
ItemTrackingMgt@1010 : Codeunit 6500;
... -
Alterar o código de função PostItemChargePerRetRcpt na thePurch.-registar codeunit (90) do seguinte modo:
Código existente 1...AmountToAssign := ROUND(NonDistrAmountToAssign * Factor,GLSetup."Amount Rounding Precision");
IF Factor < 1 THEN BEGIN
PostItemCharge(PurchLine,
TempItemLedgEntry."Entry No.",TempItemLedgEntry.Quantity,
// Delete the following line.
AmountToAssign * Sign,QtyToAssign,0);
NonDistrQuantity := NonDistrQuantity - TempItemLedgEntry.Quantity;
NonDistrQtyToAssign := NonDistrQtyToAssign - QtyToAssign;
NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
...Código de substituição 1
...AmountToAssign := ROUND(NonDistrAmountToAssign * Factor,GLSetup."Amount Rounding Precision");
IF Factor < 1 THEN BEGIN
PostItemCharge(PurchLine,
TempItemLedgEntry."Entry No.",TempItemLedgEntry.Quantity,
// Add the following lines.
AmountToAssign * Sign,QtyToAssign,0,TotalInvDiscAmtRemaining,
TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining);
// End of the added lines.
NonDistrQuantity := NonDistrQuantity - TempItemLedgEntry.Quantity;
NonDistrQtyToAssign := NonDistrQtyToAssign - QtyToAssign;
NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
...Código existente 2
...NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
PostItemCharge(PurchLine,
TempItemLedgEntry."Entry No.",TempItemLedgEntry.Quantity,
// Delete the following line.
NonDistrAmountToAssign * Sign,NonDistrQtyToAssign,0);
UNTIL TempItemLedgEntry.NEXT = 0;
END ELSE
ERROR(Text042)
ELSE
...Código de substituição 2
...NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
PostItemCharge(PurchLine,
TempItemLedgEntry."Entry No.",TempItemLedgEntry.Quantity,
// Add the following lines.
NonDistrAmountToAssign * Sign,NonDistrQtyToAssign,0,TotalInvDiscAmtRemaining,
TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining);
// End of the added lines.
UNTIL TempItemLedgEntry.NEXT = 0;
END ELSE
ERROR(Text042)
ELSE
...Código existente 3
...ELSE
PostItemCharge(PurchLine,
ReturnRcptLine."Item Rcpt. Entry No.",ReturnRcptLine."Quantity (Base)",
TempItemChargeAssgntPurch."Amount to Assign" * Sign,
// Delete the following line.
TempItemChargeAssgntPurch."Qty. to Assign",0)
END;
LOCAL PROCEDURE PostAssocItemJnlLine@3(QtyToBeShipped@1000 : Decimal;QtyToBeShippedBase@1001 : Decimal) : Integer;
VAR
...Código de substituição 3
...ELSE
PostItemCharge(PurchLine,
ReturnRcptLine."Item Rcpt. Entry No.",ReturnRcptLine."Quantity (Base)",
TempItemChargeAssgntPurch."Amount to Assign" * Sign,
// Add the following lines.
TempItemChargeAssgntPurch."Qty. to Assign",0,TotalInvDiscAmtRemaining,
TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining)
// End of the added lines.
END;
LOCAL PROCEDURE PostAssocItemJnlLine@3(QtyToBeShipped@1000 : Decimal;QtyToBeShippedBase@1001 : Decimal) : Integer;
VAR
... -
Alterar o código de função PostItemCharge na thePurch.-registar codeunit (90) do seguinte modo:
Código existente 1...TempValueEntryRelation.DELETEALL;
END;
END;
// Delete the following line.
LOCAL PROCEDURE PostItemCharge@42(PurchLine@1000 : Record 39;ItemEntryNo@1004 : Integer;QuantityBase@1005 : Decimal;AmountToAssign@1006 : Decimal;QtyToAssign@1007 : Decimal;IndirectCostPct@1008 : Decimal);
VAR
DummyTrackingSpecification@1001 : Record 336;
BEGIN
WITH TempItemChargeAssgntPurch DO BEGIN
...Código de substituição 1
...TempValueEntryRelation.DELETEALL;
END;
END;
// Add the following line.
LOCAL PROCEDURE PostItemCharge@42(PurchLine@1000 : Record 39;ItemEntryNo@1004 : Integer;QuantityBase@1005 : Decimal;AmountToAssign@1006 : Decimal;QtyToAssign@1007 : Decimal;IndirectCostPct@1008 : Decimal;VAR TotalInvDiscAmtRemaining@1009 : Decimal;VAR TotalQtyRemaining@1010 : Decimal;VAR TotalLineDiscAmtRemaining@1011 : Decimal;VAR TotalLineAmtRemaining@1012 : Decimal);
VAR
DummyTrackingSpecification@1001 : Record 336;
BEGIN
WITH TempItemChargeAssgntPurch DO BEGIN
...Código existente 2
...ROUND(
PurchLine.Amount / QuantityBase,GLSetup."Unit-Amount Rounding Precision");
PurchLine."Inv. Discount Amount" := ROUND(
// Delete the following lines.
PurchLine."Inv. Discount Amount" / PurchLine.Quantity * QtyToAssign,
GLSetup."Amount Rounding Precision");
PurchLine."Line Discount Amount" := ROUND(
PurchLine."Line Discount Amount" / PurchLine.Quantity * QtyToAssign,
GLSetup."Amount Rounding Precision");
// End of the deleted lines.
PostItemJnlLine(
PurchLine,
0,0,
QuantityBase,QuantityBase,
...Código de substituição 2
...ROUND(
PurchLine.Amount / QuantityBase,GLSetup."Unit-Amount Rounding Precision");
PurchLine."Inv. Discount Amount" := ROUND(
// Add the following lines.
TotalInvDiscAmtRemaining / TotalQtyRemaining * QtyToAssign,
GLSetup."Amount Rounding Precision");
PurchLine."Line Discount Amount" := ROUND(
TotalLineDiscAmtRemaining / TotalQtyRemaining * QtyToAssign,
GLSetup."Amount Rounding Precision");
PurchLine."Line Amount" := ROUND(
TotalLineAmtRemaining / TotalQtyRemaining * QtyToAssign,
GLSetup."Amount Rounding Precision");
TotalInvDiscAmtRemaining := TotalInvDiscAmtRemaining - PurchLine."Inv. Discount Amount";
TotalLineDiscAmtRemaining := TotalLineDiscAmtRemaining - PurchLine."Line Discount Amount";
TotalLineAmtRemaining := TotalLineAmtRemaining - PurchLine."Line Amount";
TotalQtyRemaining := TotalQtyRemaining - QtyToAssign;
// End of the added lines.
PostItemJnlLine(
PurchLine,
0,0,
QuantityBase,QuantityBase,
...
Pré-requisitos
Tem de ter um dos seguintes produtos instalado para aplicar esta correcção:
-
Microsoft Dynamics NAV 2009 R2
-
Microsoft Dynamics NAV 2009 SP1
Informações de remoção
Não é possível remover esta correcção.
Estado
A Microsoft confirmou que este é um problema nos produtos da Microsoft listados na secção "Aplica-se a".
Nota Este é um artigo "Publicação rápida" criado diretamente a partir da organização de suporte da Microsoft. As informações contidas neste documento são fornecidas como-se em resposta a questões emergentes. Como resultado da urgência na sua disponibilização, os materiais podem incluir erros tipográficos e podem ser revistos em qualquer altura sem aviso prévio. Para outras considerações, consulte os Termos de utilização.
