Acest articol se aplică la Microsoft pentru următoarele țări și limbi regionale.
-
Engleză (Canada) (en-ca)
-
Engleză (Statele Unite) (en-us)
-
Spaniolă (Mexic) (es-mx)
-
Franceză (Canada) (fr-ca)
Simptome
Să presupunem că setați CAD ca valoarea suplimentare de raportare monedă în Parametrizare Contabilitate caseta de dialog în America de Nord versiunea de Microsoft Dynamics NAV 2009. Când publicați o factură de cumpărare care conține TVA, primiți următorul mesaj de eroare:
Imposibil de finalizat tranzacția, deoarece aceasta va provoca inconsistențe în tabelul Intrare Contabilitate. Verifica unde și cum funcția CONSECVENTĂ este utilizat în tranzacţie să găsiți motivul pentru eroare.
Această problemă se produce în următoarele produse:
-
Versiunea de Microsoft Dynamics NAV 2009 R2 din America de Nord
-
Din America de Nord versiunea de Microsoft Dynamics NAV 2009 Service Pack 1
Rezolvare
Informații despre remedierea rapidă
Un hotfix acceptat este acum disponibil de la Microsoft. Cu toate acestea, acesta este destinat numai corectării problemei descrise în acest articol. Aplicați-o numai pe sistemele care întâmpină această problemă anume. Această remediere rapidă poate să necesite testare suplimentară. De aceea, dacă nu sunteți grav afectat de această problemă, vă recomandăm să așteptați următorul pachet service pack Microsoft Dynamics NAV 2009 sau versiunea Microsoft Dynamics NAV următoare, care conține această remediere rapidă.
Notă În cazuri speciale, costurile implicate de obicei pentru asistență apeluri pot fi anulate dacă un specialist în asistență tehnică pentru Microsoft Dynamics și produse asociate stabilește că o anumită actualizare va rezolva problema. Se vor aplica costurile uzuale de asistenţă pentru întrebări suplimentare de asistenţă şi pentru probleme ce nu fac obiectul actualizării în cauză.
Informaţii despre instalare
Microsoft furnizează exemple de programare scop ilustrativ, fără nicio garanţie explicită sau implicită. Aceasta include, dar nu se limitează la, garanţiile implicite de vandabilitate sau potrivire pentru un anumit scop. Acest articol presupune că sunteţi familiarizat cu limbajul de programare care este prezentat şi cu instrumentele utilizate pentru a crea şi a depana proceduri. Specialiștii în asistență Microsoft pot ajuta la explicarea funcționalității unei anumite proceduri, dar nu vor modifica aceste exemple pentru a furniza funcționalitate suplimentară sau pentru a construi proceduri pentru a răspunde cerințelor dvs. specifice.
Notă Înainte de a instala această remediere rapidă, Verificați că toate Microsoft Navision client utilizatorii au făcut Log off sistemul. Aceasta include utilizatorii de client Microsoft Navision Application Services (NAS). Ar trebui să fie singurul client utilizatorului care este conectat când implementați această remediere rapidă.
Pentru a implementa această remediere rapidă, trebuie să aveți o licență de dezvoltare.
Vă recomandăm că contul de utilizator în fereastra Conectări Windows sau în fereastra Conectări bază de date se atribuie "SUPER" rolul ID-ul. În cazul în care contul de utilizator nu poate fi atribuit ID-ul "SUPER" rolul, trebuie să verificați că contul de utilizator are următoarele permisiuni:
-
Modify permisiunea pentru obiectul care se va schimba.
-
Executare permisiunea pentru obiectul de sistem obiect ID 5210 și pentru obiectul de sistem obiect ID 9015 .
Notă Nu trebuie să aveți drepturi de la magazine de date decât dacă trebuie să efectuați o reparare de date.
Modificări de cod
Notă Întotdeauna test cod remediază într-un mediu controlat înainte de a aplica remedieri pentru computerele de producție.
Pentru a rezolva această problemă, urmați acești pași:
-
Modificați codul din câmpurile din tabelul de linie de valoarea TVA (10011) după cum urmează:
Cod existent...ESM=Es Informe jurisdicci¢n;
FRC=Est une juridiction fiscale;
ENC=Is Report-to Jurisdiction];
Editable=No }
}
KEYS
{
{ ;Tax Area Code for Key,Tax Jurisdiction Code,Tax %,Tax Group Code,Expense/Capitalize,Tax Type,Use Tax;
...Cod de înlocuire
...
ESM=Es Informe jurisdicci¢n;
FRC=Est une juridiction fiscale;
ENC=Is Report-to Jurisdiction];
Editable=No }
// Add the following line.
{ 10044; ;Tax Base Amount FCY ;Decimal }
// End of the added line.
}
KEYS
{
{ ;Tax Area Code for Key,Tax Jurisdiction Code,Tax %,Tax Group Code,Expense/Capitalize,Tax Type,Use Tax;
... -
Modificați codul din funcția PostSalesTaxToGL în Codeunit de vânzări-Post (80) după cum urmează:
Cod existent...END;
GenJnlLine."Tax Jurisdiction Code" := TempSalesTaxAmtLine."Tax Jurisdiction Code";
IF TempSalesTaxAmtLine."Tax Amount" <> 0 THEN BEGIN
RemSalesTaxSrcAmt := RemSalesTaxSrcAmt +
// Delete the following lines.
CurrExchRate.ExchangeAmtLCYToFCY(
UseDate,SalesHeader."Currency Code",TempSalesTaxAmtLine."Tax Amount",SalesHeader."Currency Factor");
// End of the deleted lines.
GenJnlLine."Source Curr. VAT Amount" :=
SalesTaxCalculate.ArithmeticRound(RemSalesTaxSrcAmt,Currency."Amount Rounding Precision");
RemSalesTaxSrcAmt := RemSalesTaxSrcAmt - GenJnlLine."Source Curr. VAT Amount";
RemSalesTaxAmt := RemSalesTaxAmt + TempSalesTaxAmtLine."Tax Amount";
...Cod de înlocuire
...END;
GenJnlLine."Tax Jurisdiction Code" := TempSalesTaxAmtLine."Tax Jurisdiction Code";
IF TempSalesTaxAmtLine."Tax Amount" <> 0 THEN BEGIN
RemSalesTaxSrcAmt := RemSalesTaxSrcAmt +
// Add the following lines.
TempSalesTaxAmtLine."Tax Base Amount FCY" * TempSalesTaxAmtLine."Tax %" / 100;
// End of the added lines.
GenJnlLine."Source Curr. VAT Amount" :=
SalesTaxCalculate.ArithmeticRound(RemSalesTaxSrcAmt,Currency."Amount Rounding Precision");
RemSalesTaxSrcAmt := RemSalesTaxSrcAmt - GenJnlLine."Source Curr. VAT Amount";
RemSalesTaxAmt := RemSalesTaxAmt + TempSalesTaxAmtLine."Tax Amount";
... -
Modificați codul din funcția PostSalesTaxToGL în cump.-Post Codeunit (90) după cum urmează:
Cod existent...END;
GenJnlLine."Tax Jurisdiction Code" := TempSalesTaxAmtLine."Tax Jurisdiction Code";
IF TempSalesTaxAmtLine."Tax Amount" <> 0 THEN BEGIN
RemSalesTaxSrcAmt := RemSalesTaxSrcAmt +
// Delete the following lines.
CurrExchRate.ExchangeAmtLCYToFCY(
Usedate,PurchHeader."Currency Code",TempSalesTaxAmtLine."Tax Amount",PurchHeader."Currency Factor");
// End of the deleted lines.
GenJnlLine."Source Curr. VAT Amount" :=
SalesTaxCalculate.ArithmeticRound(RemSalesTaxSrcAmt,Currency."Amount Rounding Precision");
RemSalesTaxSrcAmt := RemSalesTaxSrcAmt - GenJnlLine."Source Curr. VAT Amount";
RemSalesTaxAmt := RemSalesTaxAmt + TempSalesTaxAmtLine."Tax Amount";
...Cod de înlocuire
...END;
GenJnlLine."Tax Jurisdiction Code" := TempSalesTaxAmtLine."Tax Jurisdiction Code";
IF TempSalesTaxAmtLine."Tax Amount" <> 0 THEN BEGIN
RemSalesTaxSrcAmt := RemSalesTaxSrcAmt +
// Add the following line.
TempSalesTaxAmtLine."Tax Base Amount FCY" * TempSalesTaxAmtLine."Tax %" / 100;
// End of the added line.
GenJnlLine."Source Curr. VAT Amount" :=
SalesTaxCalculate.ArithmeticRound(RemSalesTaxSrcAmt,Currency."Amount Rounding Precision");
RemSalesTaxSrcAmt := RemSalesTaxSrcAmt - GenJnlLine."Source Curr. VAT Amount";
RemSalesTaxAmt := RemSalesTaxAmt + TempSalesTaxAmtLine."Tax Amount";
... -
Modificați codul din funcția PostProvincialSalesTaxToGL în cump.-Post Codeunit (90) după cum urmează:
Cod existent...TaxJurisdiction.TESTFIELD("Tax Account (Purchases)");
GenJnlLine."Account No." := TaxJurisdiction."Tax Account (Purchases)";
END;
GenJnlLine.Amount := GenJnlLine."VAT Amount";
// Delete the following lines.
GenJnlLine."Source Curr. VAT Base Amount" := 0;
GenJnlLine."VAT Base Amount (LCY)" := 0;
GenJnlLine."VAT Base Amount" := 0;
GenJnlLine."Source Curr. VAT Amount" := 0;
// End of the deleted lines.
GenJnlLine."VAT Amount (LCY)" := 0;
GenJnlLine."VAT Amount" := 0;
GenJnlLine.Quantity := 0;
GenJnlLine."VAT Difference" := 0;
...Cod de înlocuire
...TaxJurisdiction.TESTFIELD("Tax Account (Purchases)");
GenJnlLine."Account No." := TaxJurisdiction."Tax Account (Purchases)";
END;
GenJnlLine.Amount := GenJnlLine."VAT Amount";
// Add the following lines.
GenJnlLine."Source Currency Amount" := GenJnlLine."Source Curr. VAT Amount";
GenJnlLine."Source Curr. VAT Base Amount" := 0;
GenJnlLine."VAT Base Amount (LCY)" := 0;
GenJnlLine."VAT Base Amount" := 0;
// End of the added lines.
GenJnlLine."VAT Amount (LCY)" := 0;
GenJnlLine."VAT Amount" := 0;
GenJnlLine.Quantity := 0;
GenJnlLine."VAT Difference" := 0;
... -
Modificați codul din funcția AddSalesLine în taxă vânzări calcula Codeunit (398) după cum urmează:
Cod existent 1..."Round Tax" := TaxArea."Round Tax";
TaxJurisdiction.GET("Tax Jurisdiction Code");
"Is Report-to Jurisdiction" := ("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
// Delete the following line.
"Tax Base Amount" := (SalesLine."Line Amount" - SalesLine."Inv. Discount Amount") / ExchangeFactor;
// End of the deleted line.
"Line Amount" := SalesLine."Line Amount" / ExchangeFactor;
"Tax Liable" := SalesLine."Tax Liable";
Quantity := SalesLine."Quantity (Base)";
"Invoice Discount Amount" := SalesLine."Inv. Discount Amount";
...Înlocuirea cod 1
..."Round Tax" := TaxArea."Round Tax";
TaxJurisdiction.GET("Tax Jurisdiction Code");
"Is Report-to Jurisdiction" := ("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,SalesLine."Line Amount" - SalesLine."Inv. Discount Amount",ExchangeFactor,FALSE);
// End of the added line.
"Line Amount" := SalesLine."Line Amount" / ExchangeFactor;
"Tax Liable" := SalesLine."Tax Liable";
Quantity := SalesLine."Quantity (Base)";
"Invoice Discount Amount" := SalesLine."Inv. Discount Amount";
...Cod existent 2
...END ELSE BEGIN
"Line Amount" := "Line Amount" + (SalesLine."Line Amount" / ExchangeFactor);
IF SalesLine."Tax Liable" THEN
"Tax Liable" := SalesLine."Tax Liable";
// Delete the following line.
"Tax Base Amount" := "Tax Base Amount" + ((SalesLine."Line Amount" - SalesLine."Inv. Discount Amount") / ExchangeFactor);
// End of the deleted line.
"Tax Amount" := 0;
Quantity := Quantity + SalesLine."Quantity (Base)";
"Invoice Discount Amount" := "Invoice Discount Amount" + SalesLine."Inv. Discount Amount";
MODIFY;
...Înlocuirea cod 2
...END ELSE BEGIN
"Line Amount" := "Line Amount" + (SalesLine."Line Amount" / ExchangeFactor);
IF SalesLine."Tax Liable" THEN
"Tax Liable" := SalesLine."Tax Liable";
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,SalesLine."Line Amount" - SalesLine."Inv. Discount Amount",ExchangeFactor,TRUE);
// End of the added line.
"Tax Amount" := 0;
Quantity := Quantity + SalesLine."Quantity (Base)";
"Invoice Discount Amount" := "Invoice Discount Amount" + SalesLine."Inv. Discount Amount";
MODIFY;
... -
Modificați codul din funcția AddSalesInvoiceLines în taxă vânzări calcula Codeunit (398) după cum urmează:
Cod existent 1..."Is Report-to Jurisdiction" :=
("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
"Line Amount" := SalesInvoiceLine."Line Amount" / ExchangeFactor;
// Delete the following line.
"Tax Base Amount" := SalesInvoiceLine."VAT Base Amount" / ExchangeFactor;
// End of the deleted line.
Quantity := SalesInvoiceLine.Quantity;
"Tax Liable" := SalesInvoiceLine."Tax Liable";
"Calculation Order" := TaxAreaLine."Calculation Order";
InsertRec := TRUE;
...Înlocuirea cod 1
..."Is Report-to Jurisdiction" :=
("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
"Line Amount" := SalesInvoiceLine."Line Amount" / ExchangeFactor;
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,SalesInvoiceLine."VAT Base Amount",ExchangeFactor,FALSE);
// End of the added line.
Quantity := SalesInvoiceLine.Quantity;
"Tax Liable" := SalesInvoiceLine."Tax Liable";
"Calculation Order" := TaxAreaLine."Calculation Order";
InsertRec := TRUE;
...Cod existent 2
...InsertRec := TRUE;
INSERT;
END ELSE BEGIN
"Line Amount" := "Line Amount" + (SalesInvoiceLine."Line Amount" / ExchangeFactor);
// Delete the following line.
"Tax Base Amount" := "Tax Base Amount" + (SalesInvoiceLine."VAT Base Amount" / ExchangeFactor);
// End of the deleted line.
Quantity := Quantity + SalesInvoiceLine.Quantity;
IF SalesInvoiceLine."Tax Liable" THEN
"Tax Liable" := SalesInvoiceLine."Tax Liable";
InsertRec := FALSE;
...Înlocuirea cod 2
...InsertRec := TRUE;
INSERT;
END ELSE BEGIN
"Line Amount" := "Line Amount" + (SalesInvoiceLine."Line Amount" / ExchangeFactor);
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,SalesInvoiceLine."VAT Base Amount",ExchangeFactor,TRUE);
// End of the added line.
Quantity := Quantity + SalesInvoiceLine.Quantity;
IF SalesInvoiceLine."Tax Liable" THEN
"Tax Liable" := SalesInvoiceLine."Tax Liable";
InsertRec := FALSE;
... -
Modificați codul din funcția AddSalesCrMemoLines în taxă vânzări calcula Codeunit (398) după cum urmează:
Cod existent 1..."Is Report-to Jurisdiction" :=
("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
"Line Amount" := SalesCrMemoLine."Line Amount" / ExchangeFactor;
// Delete the following line.
"Tax Base Amount" := SalesCrMemoLine."VAT Base Amount" / ExchangeFactor;
// End of the deleted line.
Quantity := SalesCrMemoLine.Quantity;
"Tax Liable" := SalesCrMemoLine."Tax Liable";
"Calculation Order" := TaxAreaLine."Calculation Order";
InsertRec := TRUE;
...Înlocuirea cod 1
..."Is Report-to Jurisdiction" :=
("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
"Line Amount" := SalesCrMemoLine."Line Amount" / ExchangeFactor;
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,SalesCrMemoLine."VAT Base Amount",ExchangeFactor,FALSE);
// End of the added line.
Quantity := SalesCrMemoLine.Quantity;
"Tax Liable" := SalesCrMemoLine."Tax Liable";
"Calculation Order" := TaxAreaLine."Calculation Order";
InsertRec := TRUE;
...Cod existent 2
...InsertRec := TRUE;
INSERT;
END ELSE BEGIN
"Line Amount" := "Line Amount" + (SalesCrMemoLine."Line Amount" / ExchangeFactor);
// Delete the following line.
"Tax Base Amount" := "Tax Base Amount" + (SalesCrMemoLine."VAT Base Amount" / ExchangeFactor);
// End of the deleted line.
Quantity := Quantity + SalesCrMemoLine.Quantity;
IF SalesCrMemoLine."Tax Liable" THEN
"Tax Liable" := SalesCrMemoLine."Tax Liable";
InsertRec := FALSE;
...Înlocuirea cod 2
...InsertRec := TRUE;
INSERT;
END ELSE BEGIN
"Line Amount" := "Line Amount" + (SalesCrMemoLine."Line Amount" / ExchangeFactor);
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,SalesCrMemoLine."VAT Base Amount",ExchangeFactor,TRUE);
// End of the added line.
Quantity := Quantity + SalesCrMemoLine.Quantity;
IF SalesCrMemoLine."Tax Liable" THEN
"Tax Liable" := SalesCrMemoLine."Tax Liable";
InsertRec := FALSE;
... -
Modificați codul din funcția AddPurchLine în taxă vânzări calcula Codeunit (398) după cum urmează:
Cod existent 1..."Round Tax" := TaxArea."Round Tax";
TaxJurisdiction.GET("Tax Jurisdiction Code");
"Is Report-to Jurisdiction" := ("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
// Delete the following line.
"Tax Base Amount" := (PurchLine."Line Amount" - PurchLine."Inv. Discount Amount") / ExchangeFactor;
// End of the deleted line.
"Line Amount" := PurchLine."Line Amount" / ExchangeFactor;
"Tax Liable" := PurchLine."Tax Liable";
"Use Tax" := PurchLine."Use Tax";
...Înlocuirea cod 1
..."Round Tax" := TaxArea."Round Tax";
TaxJurisdiction.GET("Tax Jurisdiction Code");
"Is Report-to Jurisdiction" := ("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,PurchLine."Line Amount" - PurchLine."Inv. Discount Amount",ExchangeFactor,FALSE);
// End of the added line.
"Line Amount" := PurchLine."Line Amount" / ExchangeFactor;
"Tax Liable" := PurchLine."Tax Liable";
"Use Tax" := PurchLine."Use Tax";
...Cod existent 2
...END ELSE BEGIN
"Line Amount" := "Line Amount" + (PurchLine."Line Amount" / ExchangeFactor);
IF PurchLine."Tax Liable" THEN
"Tax Liable" := PurchLine."Tax Liable";
// Delete the following line.
"Tax Base Amount" := "Tax Base Amount" + ((PurchLine."Line Amount" - PurchLine."Inv. Discount Amount") / ExchangeFactor);
// End of the deleted line.
"Tax Amount" := 0;
Quantity := Quantity + PurchLine."Quantity (Base)";
"Invoice Discount Amount" := "Invoice Discount Amount" + PurchLine."Inv. Discount Amount";
MODIFY;
...Înlocuirea cod 2
...END ELSE BEGIN
"Line Amount" := "Line Amount" + (PurchLine."Line Amount" / ExchangeFactor);
IF PurchLine."Tax Liable" THEN
"Tax Liable" := PurchLine."Tax Liable";
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,PurchLine."Line Amount" - PurchLine."Inv. Discount Amount",ExchangeFactor,TRUE);
// End of the added line.
"Tax Amount" := 0;
Quantity := Quantity + PurchLine."Quantity (Base)";
"Invoice Discount Amount" := "Invoice Discount Amount" + PurchLine."Inv. Discount Amount";
MODIFY;
... -
Modificați codul din funcția AddPurchInvoiceLines în taxă vânzări calcula Codeunit (398) după cum urmează:
Cod existent 1..."Is Report-to Jurisdiction" :=
("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
"Line Amount" := PurchInvLine."Line Amount" / ExchangeFactor;
// Delete the following line.
"Tax Base Amount" := PurchInvLine."VAT Base Amount" / ExchangeFactor;
// End of the deleted line.
Quantity := PurchInvLine.Quantity;
"Tax Liable" := PurchInvLine."Tax Liable";
"Use Tax" := PurchInvLine."Use Tax";
...Înlocuirea cod 1
..."Is Report-to Jurisdiction" :=
("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
"Line Amount" := PurchInvLine."Line Amount" / ExchangeFactor;
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,PurchInvLine."VAT Base Amount",ExchangeFactor,FALSE);
// End of the added line.
Quantity := PurchInvLine.Quantity;
"Tax Liable" := PurchInvLine."Tax Liable";
"Use Tax" := PurchInvLine."Use Tax";
...Cod existent 2
...InsertRec := TRUE;
INSERT;
END ELSE BEGIN
"Line Amount" := "Line Amount" + (PurchInvLine."Line Amount" / ExchangeFactor);
// Delete the following line.
"Tax Base Amount" := "Tax Base Amount" + (PurchInvLine."VAT Base Amount" / ExchangeFactor);
// End of the deleted line.
Quantity := Quantity + PurchInvLine.Quantity;
IF PurchInvLine."Tax Liable" THEN
"Tax Liable" := PurchInvLine."Tax Liable";
InsertRec := FALSE;
...Înlocuirea cod 2
...InsertRec := TRUE;
INSERT;
END ELSE BEGIN
"Line Amount" := "Line Amount" + (PurchInvLine."Line Amount" / ExchangeFactor);
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,PurchInvLine."VAT Base Amount",ExchangeFactor,TRUE);
// End of the added line.
Quantity := Quantity + PurchInvLine.Quantity;
IF PurchInvLine."Tax Liable" THEN
"Tax Liable" := PurchInvLine."Tax Liable";
InsertRec := FALSE;
... -
Modificați codul din funcția AddPurchCrMemoLines în taxă vânzări calcula Codeunit (398) după cum urmează:
Cod existent 1..."Is Report-to Jurisdiction" :=
("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
"Line Amount" := PurchCrMemoLine."Line Amount" / ExchangeFactor;
// Delete the following line.
"Tax Base Amount" := PurchCrMemoLine."VAT Base Amount" / ExchangeFactor;
// End of the deleted line.
Quantity := PurchCrMemoLine.Quantity;
"Tax Liable" := PurchCrMemoLine."Tax Liable";
"Use Tax" := PurchCrMemoLine."Use Tax";
...Înlocuirea cod 1
..."Is Report-to Jurisdiction" :=
("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
"Line Amount" := PurchCrMemoLine."Line Amount" / ExchangeFactor;
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,PurchCrMemoLine."VAT Base Amount",ExchangeFactor,FALSE);
// End of the added line.
Quantity := PurchCrMemoLine.Quantity;
"Tax Liable" := PurchCrMemoLine."Tax Liable";
"Use Tax" := PurchCrMemoLine."Use Tax";
...Cod existent 2
...InsertRec := TRUE;
INSERT;
END ELSE BEGIN
"Line Amount" := "Line Amount" + (PurchCrMemoLine."Line Amount" / ExchangeFactor);
// Delete the following line.
"Tax Base Amount" := "Tax Base Amount" + (PurchCrMemoLine."VAT Base Amount" / ExchangeFactor);
// End of the deleted line.
Quantity := Quantity + PurchCrMemoLine.Quantity;
IF PurchCrMemoLine."Tax Liable" THEN
"Tax Liable" := PurchCrMemoLine."Tax Liable";
InsertRec := FALSE;
...Înlocuirea cod 2
...InsertRec := TRUE;
INSERT;
END ELSE BEGIN
"Line Amount" := "Line Amount" + (PurchCrMemoLine."Line Amount" / ExchangeFactor);
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,PurchCrMemoLine."VAT Base Amount",ExchangeFactor,TRUE);
// End of the added line.
Quantity := Quantity + PurchCrMemoLine.Quantity;
IF PurchCrMemoLine."Tax Liable" THEN
"Tax Liable" := PurchCrMemoLine."Tax Liable";
InsertRec := FALSE;
... -
Modificați codul din funcția AddServiceLine în taxă vânzări calcula Codeunit (398) după cum urmează:
Cod existent 1..."Round Tax" := TaxArea."Round Tax";
TaxJurisdiction.GET("Tax Jurisdiction Code");
"Is Report-to Jurisdiction" := ("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
// Delete the following line.
"Tax Base Amount" := (ServiceLine."Line Amount" - ServiceLine."Inv. Discount Amount") / ExchangeFactor;
// End of the deleted line.
"Line Amount" := ServiceLine."Line Amount" / ExchangeFactor;
"Tax Liable" := ServiceLine."Tax Liable";
Quantity := ServiceLine."Quantity (Base)";
"Invoice Discount Amount" := ServiceLine."Inv. Discount Amount";
...Înlocuirea cod 1
..."Round Tax" := TaxArea."Round Tax";
TaxJurisdiction.GET("Tax Jurisdiction Code");
"Is Report-to Jurisdiction" := ("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,ServiceLine."Line Amount" - ServiceLine."Inv. Discount Amount",ExchangeFactor,FALSE);
// End of the added line.
"Line Amount" := ServiceLine."Line Amount" / ExchangeFactor;
"Tax Liable" := ServiceLine."Tax Liable";
Quantity := ServiceLine."Quantity (Base)";
"Invoice Discount Amount" := ServiceLine."Inv. Discount Amount";
...Cod existent 2
...END ELSE BEGIN
"Line Amount" := "Line Amount" + (ServiceLine."Line Amount" / ExchangeFactor);
IF ServiceLine."Tax Liable" THEN
"Tax Liable" := ServiceLine."Tax Liable";
// Delete the following line.
"Tax Base Amount" :=
"Tax Base Amount" + ((ServiceLine."Line Amount" - ServiceLine."Inv. Discount Amount") / ExchangeFactor);
// End of the deleted line.
"Tax Amount" := 0;
Quantity := Quantity + ServiceLine."Quantity (Base)";
"Invoice Discount Amount" := "Invoice Discount Amount" + ServiceLine."Inv. Discount Amount";
MODIFY;
...Înlocuirea cod 2
...END ELSE BEGIN
"Line Amount" := "Line Amount" + (ServiceLine."Line Amount" / ExchangeFactor);
IF ServiceLine."Tax Liable" THEN
"Tax Liable" := ServiceLine."Tax Liable";
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,ServiceLine."Line Amount" - ServiceLine."Inv. Discount Amount",ExchangeFactor,TRUE);
// End of the added line.
"Tax Amount" := 0;
Quantity := Quantity + ServiceLine."Quantity (Base)";
"Invoice Discount Amount" := "Invoice Discount Amount" + ServiceLine."Inv. Discount Amount";
MODIFY;
... -
Modificați codul din funcția AddServInvoiceLines în taxă vânzări calcula Codeunit (398) după cum urmează:
Cod existent 1..."Is Report-to Jurisdiction" :=
("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
"Line Amount" := ServInvLine."Line Amount" / ExchangeFactor;
// Delete the following lines.
"Tax Base Amount" := ServInvLine."VAT Base Amount" / ExchangeFactor;
Quantity := ServInvLine.Quantity;
"Tax Liable" := ServInvLine."Tax Liable";
// End of the deleted line.
"Calculation Order" := TaxAreaLine."Calculation Order";
InsertRec := TRUE;
INSERT;
...Înlocuirea cod 1
..."Is Report-to Jurisdiction" :=
("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
"Line Amount" := ServInvLine."Line Amount" / ExchangeFactor;
// Add the following lines.
SetTaxBaseAmount(TempSalesTaxLine,ServInvLine."VAT Base Amount",ExchangeFactor,FALSE);
Quantity := ServInvLine.Quantity;
"Tax Liable" := ServInvLine."Tax Liable";
// End of the added lines.
"Calculation Order" := TaxAreaLine."Calculation Order";
InsertRec := TRUE;
INSERT;
...Cod existent 2
...InsertRec := TRUE;
INSERT;
END ELSE BEGIN
"Line Amount" := "Line Amount" + (ServInvLine."Line Amount" / ExchangeFactor);
// Delete the following line.
"Tax Base Amount" := "Tax Base Amount" + (ServInvLine."VAT Base Amount" / ExchangeFactor);
// End of the deleted line.
Quantity := Quantity + ServInvLine.Quantity;
IF ServInvLine."Tax Liable" THEN
"Tax Liable" := ServInvLine."Tax Liable";
InsertRec := FALSE;
...Înlocuirea cod 2
...InsertRec := TRUE;
INSERT;
END ELSE BEGIN
"Line Amount" := "Line Amount" + (ServInvLine."Line Amount" / ExchangeFactor);
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,ServInvLine."VAT Base Amount",ExchangeFactor,TRUE);
// End of the added line.
Quantity := Quantity + ServInvLine.Quantity;
IF ServInvLine."Tax Liable" THEN
"Tax Liable" := ServInvLine."Tax Liable";
InsertRec := FALSE;
... -
Modificați codul din funcția AddServCrMemoLines în taxă vânzări calcula Codeunit (398) după cum urmează:
Cod existent 1..."Is Report-to Jurisdiction" :=
("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
"Line Amount" := ServCrMemoLine."Line Amount" / ExchangeFactor;
// Delete the following line.
"Tax Base Amount" := ServCrMemoLine."VAT Base Amount" / ExchangeFactor;
// End of the deleted line.
Quantity := ServCrMemoLine.Quantity;
"Tax Liable" := ServCrMemoLine."Tax Liable";
"Calculation Order" := TaxAreaLine."Calculation Order";
...Cod de înlocuire 1
..."Is Report-to Jurisdiction" :=
("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
"Line Amount" := ServCrMemoLine."Line Amount" / ExchangeFactor;
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,ServCrMemoLine."VAT Base Amount",ExchangeFactor,FALSE);
// End of the added line.
Quantity := ServCrMemoLine.Quantity;
"Tax Liable" := ServCrMemoLine."Tax Liable";
"Calculation Order" := TaxAreaLine."Calculation Order";
...Cod existent 2
...InsertRec := TRUE;
INSERT;
END ELSE BEGIN
"Line Amount" := "Line Amount" + (ServCrMemoLine."Line Amount" / ExchangeFactor);
// Delete the following line.
"Tax Base Amount" := "Tax Base Amount" + (ServCrMemoLine."VAT Base Amount" / ExchangeFactor);
// End of the deleted line.
Quantity := Quantity + ServCrMemoLine.Quantity;
IF ServCrMemoLine."Tax Liable" THEN
"Tax Liable" := ServCrMemoLine."Tax Liable";
InsertRec := FALSE;
...Înlocuirea cod 2
...InsertRec := TRUE;
INSERT;
END ELSE BEGIN
"Line Amount" := "Line Amount" + (ServCrMemoLine."Line Amount" / ExchangeFactor);
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,ServCrMemoLine."VAT Base Amount",ExchangeFactor,TRUE);
// End of the added line.
Quantity := Quantity + ServCrMemoLine.Quantity;
IF ServCrMemoLine."Tax Liable" THEN
"Tax Liable" := ServCrMemoLine."Tax Liable";
InsertRec := FALSE;
... -
Adăugați o funcție SetTaxBaseAmount în taxă vânzări calcula Codeunit (398) după cum urmează:
LOCAL PROCEDURE SetTaxBaseAmount@1020031(VAR SalesTaxAmountLine@1020001 : Record 10011;Value@1020000 : Decimal;ExchangeFactor@1020002 : Decimal;Increment@1020003 : Boolean); BEGIN
WITH SalesTaxAmountLine DO BEGIN
IF Increment THEN
"Tax Base Amount FCY" += Value
ELSE
"Tax Base Amount FCY" := Value;
"Tax Base Amount" := "Tax Base Amount FCY" / ExchangeFactor;
END;
END;
Cerințe preliminare
Trebuie să aveți unul dintre următoarele produse instalate pentru a aplica această remediere rapidă:
-
Versiunea de Microsoft Dynamics NAV 2009 R2 din America de Nord
-
Din America de Nord versiunea de Microsoft Dynamics NAV 2009 Service Pack 1
Eliminare informaţii
Nu se poate elimina această remediere rapidă.
Stare
Microsoft a confirmat că aceasta este o problemă cu produsele Microsoft enumerate în secţiunea „Se aplică la".
Notă Acesta este un articol "rapid publicat" creat direct în cadrul organizației de asistență Microsoft. Informațiile conținute în acest document sunt furnizate ca răspuns la problemele care apar. Ca rezultat al vitezei în a-l face disponibil, materialele pot include erori tipografice și pot fi revizuite în orice moment, fără notificare. Consultați Termenii de utilizare pentru alte considerații.
