Скидки на товарных издержек, которые назначаются поставок продаж распределяются в соответствии с выбранный вариант для соответствующей записи в Microsoft Dynamics NAV 2009. Выполните действия, описанные в разделе изменения кода , чтобы решить эту проблему. Эта проблема возникает в следующих продуктах:
-
Microsoft Dynamics NAV 2009 R2
-
Microsoft Dynamics NAV 2009 Пакет обновления 1 (SP1)
Решение
Сведения об исправлении
Исправление от корпорации Майкрософт доступно. Однако оно предназначено только для устранения проблемы, описанной в этой статье. Предлагаемое исправление должно применяться исключительно в системах, в которых обнаружена эта специфическая неполадка. Это исправление может проходить дополнительное тестирование. Таким образом Если вы не подвержены серьезно эту проблему, рекомендуется дождаться следующего пакета обновления для Microsoft Dynamics NAV 2009 или следующей версии Microsoft Dynamics NAV, содержащего это исправление.
Примечание. В особых случаях оплата, предусмотренная в службу поддержки может быть отменена Если специалист службы технической поддержки Microsoft Dynamics и связанных продуктов определит, что решения проблемы является специально выпущенное. Затраты на обычные услуги службы поддержки будут применяться к дополнительным вопросам и проблемам, которые не охватываются конкретным обновлением.
Сведения об установке
Корпорация Майкрософт предлагает примеры программного кода только для иллюстрации и без явных или подразумеваемых гарантий. Это включает, но не ограничиваясь, подразумеваемые гарантии товарной пригодности или пригодности для определенной цели. В данной статье предполагается, что вы знакомы с демонстрируемым языком программирования и средствами, которые используются для создания и отладки. Сотрудники службы поддержки Майкрософт могут объяснить возможности конкретной процедуры. Тем не менее они не изменит примеров для обеспечения функциональных возможностей или создания процедур для определенных требований.
Примечание. Перед установкой данного исправления необходимо проверьте регистрацию всех пользователей клиента Microsoft Dynamics NAV выход из системы. Это относится к службам Microsoft Dynamics NAV приложения сервера (NAS). Должен быть только клиент пользователя, который вошел в систему, при реализации данного исправления.
Чтобы реализовать это исправление, необходимо иметь лицензию разработчика.
Рекомендуется, чтобы учетной записи пользователя в окне Логины Windows или в окне Логины базы данных был присвоен идентификатор роли «SUPER» Если учетная запись пользователя не может быть назначена роль «SUPER» идентификатор, необходимо убедиться, что учетная запись пользователя имеет следующие разрешения.
-
Изменение разрешений для объекта, подлежащий изменению.
-
Разрешение Execute для объекта 5210 идентификатор объекта системы и системы 9015 идентификатор объекта
объект.
Примечание. Необходимо иметь права к хранилищам данных, если необходимо выполнить восстановление данных.
Изменения кода
Примечание. Всегда тестовый код исправления в контролируемой среде, прежде чем применить исправления на производственных компьютерах.
Чтобы устранить эту проблему, выполните следующие действия:
-
Измените код в окне Свойства в функции учет продаж (80) следующим образом:
Существующий код 1...PostJobContractLine(JobTaskSalesLine,TempJnlLineDim2);
END;
SalesLine.Type::"Charge (Item)":
IF Invoice OR ItemChargeAssgntOnly THEN BEGIN
// Delete the following line.
ItemJnlRollRndg := FALSE;
// End of the deleted line.
ClearItemChargeAssgntFilter;
TempItemChargeAssgntSales.SETCURRENTKEY("Applies-to Doc. Type");
TempItemChargeAssgntSales.SETRANGE("Document Line No.",SalesLine."Line No.");
IF TempItemChargeAssgntSales.FINDSET THEN
...Код для замены 1
...PostJobContractLine(JobTaskSalesLine,TempJnlLineDim2);
END;
SalesLine.Type::"Charge (Item)":
IF Invoice OR ItemChargeAssgntOnly THEN BEGIN
// Add the following line.
ItemJnlRollRndg := TRUE;
// End of the added line.
ClearItemChargeAssgntFilter;
TempItemChargeAssgntSales.SETCURRENTKEY("Applies-to Doc. Type");
TempItemChargeAssgntSales.SETRANGE("Document Line No.",SalesLine."Line No.");
IF TempItemChargeAssgntSales.FINDSET THEN
...Существующий код 2
...GenJnlLineDocNo := TempItemChargeAssgntSales."Applies-to Doc. No.";
CASE TempItemChargeAssgntSales."Applies-to Doc. Type" OF
TempItemChargeAssgntSales."Applies-to Doc. Type"::Shipment:
BEGIN
// Delete the following line.
PostItemChargePerShpt(SalesLine);
TempItemChargeAssgntSales.MARK(TRUE);
END;
TempItemChargeAssgntSales."Applies-to Doc. Type"::"Return Receipt":
BEGIN
...Код для замены 2
...GenJnlLineDocNo := TempItemChargeAssgntSales."Applies-to Doc. No.";
CASE TempItemChargeAssgntSales."Applies-to Doc. Type" OF
TempItemChargeAssgntSales."Applies-to Doc. Type"::Shipment:
BEGIN
// Add the following lines.
PostItemChargePerShpt(SalesLine,SalesLine."Inv. Discount Amount",
SalesLine.Quantity,SalesLine."Line Discount Amount",SalesLine."Line Amount");
// End of the added lines.
TempItemChargeAssgntSales.MARK(TRUE);
END;
TempItemChargeAssgntSales."Applies-to Doc. Type"::"Return Receipt":
BEGIN
...Существующий код 3
...TempItemChargeAssgntSales.MARK(TRUE);
END;
TempItemChargeAssgntSales."Applies-to Doc. Type"::"Return Receipt":
BEGIN
// Delete the following line.
PostItemChargePerRetRcpt(SalesLine);
TempItemChargeAssgntSales.MARK(TRUE);
END;
TempItemChargeAssgntSales."Applies-to Doc. Type"::Order,
TempItemChargeAssgntSales."Applies-to Doc. Type"::Invoice:
...Код для замены 3
...TempItemChargeAssgntSales.MARK(TRUE);
END;
TempItemChargeAssgntSales."Applies-to Doc. Type"::"Return Receipt":
BEGIN
// Add the following lines.
PostItemChargePerRetRcpt(SalesLine,SalesLine."Inv. Discount Amount",
SalesLine.Quantity,SalesLine."Line Discount Amount",SalesLine."Line Amount");
// End of the added lines.
TempItemChargeAssgntSales.MARK(TRUE);
END;
TempItemChargeAssgntSales."Applies-to Doc. Type"::Order,
TempItemChargeAssgntSales."Applies-to Doc. Type"::Invoice:
... -
Измените код в функцию PostItemChargePerShpt в функции учет продаж (80) следующим образом:
Существующий код 1...END;
END;
END;
// Delete the following line.
LOCAL PROCEDURE PostItemChargePerShpt@5807(SalesLine@1000 : Record 37);
VAR
SalesShptLine@1003 : Record 111;
TempItemLedgEntry@1010 : TEMPORARY Record 32;
ItemTrackingMgt@1009 : Codeunit 6500;
...Код для замены 1
...END;
END;
END;
// Add the following line.
LOCAL PROCEDURE PostItemChargePerShpt@5807(SalesLine@1000 : Record 37;VAR TotalInvDiscAmtRemaining@1012 : Decimal;VAR TotalQtyRemaining@1013 : Decimal;VAR TotalLineDiscAmtRemaining@1014 : Decimal;VAR TotalLineAmtRemaining@1015 : Decimal);
VAR
SalesShptLine@1003 : Record 111;
TempItemLedgEntry@1010 : TEMPORARY Record 32;
ItemTrackingMgt@1009 : Codeunit 6500;
...Существующий код 2
...AmountToAssign := ROUND(NonDistrAmountToAssign * Factor,GLSetup."Amount Rounding Precision");
IF Factor < 1 THEN BEGIN
PostItemCharge(SalesLine,
TempItemLedgEntry."Entry No.",ABS(TempItemLedgEntry.Quantity),
// Delete the following line.
AmountToAssign,QtyToAssign);
NonDistrQuantity := NonDistrQuantity - ABS(TempItemLedgEntry.Quantity);
NonDistrQtyToAssign := NonDistrQtyToAssign - QtyToAssign;
NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
...Код для замены 2
...AmountToAssign := ROUND(NonDistrAmountToAssign * Factor,GLSetup."Amount Rounding Precision");
IF Factor < 1 THEN BEGIN
PostItemCharge(SalesLine,
TempItemLedgEntry."Entry No.",ABS(TempItemLedgEntry.Quantity),
// Add the following lines.
AmountToAssign,QtyToAssign,TotalInvDiscAmtRemaining,
TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining);
// End of the added lines.
NonDistrQuantity := NonDistrQuantity - ABS(TempItemLedgEntry.Quantity);
NonDistrQtyToAssign := NonDistrQtyToAssign - QtyToAssign;
NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
...Существующий код 3
...NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
PostItemCharge(SalesLine,
TempItemLedgEntry."Entry No.",ABS(TempItemLedgEntry.Quantity),
// Delete the following line.
NonDistrAmountToAssign,NonDistrQtyToAssign);
UNTIL TempItemLedgEntry.NEXT = 0;
END ELSE
PostItemCharge(SalesLine,
SalesShptLine."Item Shpt. Entry No.",SalesShptLine."Quantity (Base)",
...Код для замены 3
...NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
PostItemCharge(SalesLine,
TempItemLedgEntry."Entry No.",ABS(TempItemLedgEntry.Quantity),
// Add the following lines.
NonDistrAmountToAssign,NonDistrQtyToAssign,TotalInvDiscAmtRemaining,
TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining);
// End of the added lines.
UNTIL TempItemLedgEntry.NEXT = 0;
END ELSE
PostItemCharge(SalesLine,
SalesShptLine."Item Shpt. Entry No.",SalesShptLine."Quantity (Base)",
...Существующий код 4
...END ELSE
PostItemCharge(SalesLine,
SalesShptLine."Item Shpt. Entry No.",SalesShptLine."Quantity (Base)",
TempItemChargeAssgntSales."Amount to Assign",
// Delete the following lines.
TempItemChargeAssgntSales."Qty. to Assign");
END;
LOCAL PROCEDURE PostItemChargePerRetRcpt@5810(SalesLine@1000 : Record 37);
// End of the deleted lines.
VAR
ReturnRcptLine@1002 : Record 6661;
TempItemLedgEntry@1010 : TEMPORARY Record 32;
ItemTrackingMgt@1009 : Codeunit 6500;
...Код для замены 4
...END ELSE
PostItemCharge(SalesLine,
SalesShptLine."Item Shpt. Entry No.",SalesShptLine."Quantity (Base)",
TempItemChargeAssgntSales."Amount to Assign",
// Add the following lines.
TempItemChargeAssgntSales."Qty. to Assign",TotalInvDiscAmtRemaining,
TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining);
END;
LOCAL PROCEDURE PostItemChargePerRetRcpt@5810(SalesLine@1000 : Record 37;VAR TotalInvDiscAmtRemaining@1012 : Decimal;VAR TotalQtyRemaining@1013 : Decimal;VAR TotalLineDiscAmtRemaining@1014 : Decimal;VAR TotalLineAmtRemaining@1015 : Decimal);
// End of the added lines.
VAR
ReturnRcptLine@1002 : Record 6661;
TempItemLedgEntry@1010 : TEMPORARY Record 32;
ItemTrackingMgt@1009 : Codeunit 6500;
... -
Измените код в функцию PostItemChargePerRetRcpt в функции учет продаж (80) следующим образом:
Существующий код 1...AmountToAssign := ROUND(NonDistrAmountToAssign * Factor,GLSetup."Amount Rounding Precision");
IF Factor < 1 THEN BEGIN
PostItemCharge(SalesLine,
TempItemLedgEntry."Entry No.",ABS(TempItemLedgEntry.Quantity),
// Delete the following line.
AmountToAssign,QtyToAssign);
NonDistrQuantity := NonDistrQuantity - ABS(TempItemLedgEntry.Quantity);
NonDistrQtyToAssign := NonDistrQtyToAssign - QtyToAssign;
NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
...Код для замены 1
...AmountToAssign := ROUND(NonDistrAmountToAssign * Factor,GLSetup."Amount Rounding Precision");
IF Factor < 1 THEN BEGIN
PostItemCharge(SalesLine,
TempItemLedgEntry."Entry No.",ABS(TempItemLedgEntry.Quantity),
// Add the following lines.
AmountToAssign,QtyToAssign,TotalInvDiscAmtRemaining,
TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining);
// End of the added lines.
NonDistrQuantity := NonDistrQuantity - ABS(TempItemLedgEntry.Quantity);
NonDistrQtyToAssign := NonDistrQtyToAssign - QtyToAssign;
NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
...Существующий код 2
...NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
PostItemCharge(SalesLine,
TempItemLedgEntry."Entry No.",ABS(TempItemLedgEntry.Quantity),
// Delete the following line.
NonDistrAmountToAssign,NonDistrQtyToAssign);
UNTIL TempItemLedgEntry.NEXT = 0;
END ELSE
PostItemCharge(SalesLine,
ReturnRcptLine."Item Rcpt. Entry No.",ReturnRcptLine."Quantity (Base)",
...Код для замены 2
...NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
PostItemCharge(SalesLine,
TempItemLedgEntry."Entry No.",ABS(TempItemLedgEntry.Quantity),
// Add the following lines.
NonDistrAmountToAssign,NonDistrQtyToAssign,TotalInvDiscAmtRemaining,
TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining);
// End of the added lines.
UNTIL TempItemLedgEntry.NEXT = 0;
END ELSE
PostItemCharge(SalesLine,
ReturnRcptLine."Item Rcpt. Entry No.",ReturnRcptLine."Quantity (Base)",
...Существующий код 3
...END ELSE
PostItemCharge(SalesLine,
ReturnRcptLine."Item Rcpt. Entry No.",ReturnRcptLine."Quantity (Base)",
TempItemChargeAssgntSales."Amount to Assign",
// Delete the following line.
TempItemChargeAssgntSales."Qty. to Assign")
END;
LOCAL PROCEDURE PostAssocItemJnlLine@3(QtyToBeShipped@1000 : Decimal;QtyToBeShippedBase@1001 : Decimal) : Integer;
VAR
...Код для замены 3
...END ELSE
PostItemCharge(SalesLine,
ReturnRcptLine."Item Rcpt. Entry No.",ReturnRcptLine."Quantity (Base)",
TempItemChargeAssgntSales."Amount to Assign",
// Add the following lines.
TempItemChargeAssgntSales."Qty. to Assign",TotalInvDiscAmtRemaining,
TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining)
// End of the added lines.
END;
LOCAL PROCEDURE PostAssocItemJnlLine@3(QtyToBeShipped@1000 : Decimal;QtyToBeShippedBase@1001 : Decimal) : Integer;
VAR
... -
Измените код в функцию PostItemCharge в функции учет продаж (80) следующим образом:
Существующий код 1...TempValueEntryRelation.DELETEALL;
END;
END;
// Delete the following line.
PROCEDURE PostItemCharge@42(SalesLine@1005 : Record 37;ItemEntryNo@1004 : Integer;QuantityBase@1003 : Decimal;AmountToAssign@1002 : Decimal;QtyToAssign@1001 : Decimal);
VAR
DummyTrackingSpecification@1000 : Record 336;
BEGIN
WITH TempItemChargeAssgntSales DO BEGIN
...Код для замены 1
...TempValueEntryRelation.DELETEALL;
END;
END;
// Add the following line.
PROCEDURE PostItemCharge@42(SalesLine@1005 : Record 37;ItemEntryNo@1004 : Integer;QuantityBase@1003 : Decimal;AmountToAssign@1002 : Decimal;QtyToAssign@1001 : Decimal;VAR TotalInvDiscAmtRemaining@1006 : Decimal;VAR TotalQtyRemaining@1007 : Decimal;VAR TotalLineDiscAmtRemaining@1008 : Decimal;VAR TotalLineAmtRemaining@1009 : Decimal);
VAR
DummyTrackingSpecification@1000 : Record 336;
BEGIN
WITH TempItemChargeAssgntSales DO BEGIN
...Существующий код 2
...SalesLine.Amount :=
CurrExchRate.ExchangeAmtFCYToLCY(
UseDate,SalesHeader."Currency Code",TotalChargeAmt,SalesHeader."Currency Factor");
SalesLine."Inv. Discount Amount" := ROUND(
// Delete the following lines.
SalesLine."Inv. Discount Amount" / SalesLine.Quantity * QtyToAssign,
GLSetup."Amount Rounding Precision");
// End of the deleted lines.
SalesLine.Amount := ROUND(SalesLine.Amount,GLSetup."Amount Rounding Precision") - TotalChargeAmtLCY;
IF SalesHeader."Currency Code" <> '' THEN
TotalChargeAmtLCY := TotalChargeAmtLCY + SalesLine.Amount;
SalesLine."Unit Cost (LCY)" := ROUND(
...Код для замены 2
...SalesLine.Amount :=
CurrExchRate.ExchangeAmtFCYToLCY(
UseDate,SalesHeader."Currency Code",TotalChargeAmt,SalesHeader."Currency Factor");
SalesLine."Inv. Discount Amount" := ROUND(
// Add the following lines.
TotalInvDiscAmtRemaining / TotalQtyRemaining * QtyToAssign,
GLSetup."Amount Rounding Precision");
SalesLine."Line Discount Amount" := ROUND(
TotalLineDiscAmtRemaining / TotalQtyRemaining * QtyToAssign,
GLSetup."Amount Rounding Precision");
SalesLine."Line Amount" := ROUND(
TotalLineAmtRemaining / TotalQtyRemaining * QtyToAssign,
GLSetup."Amount Rounding Precision");
TotalInvDiscAmtRemaining := TotalInvDiscAmtRemaining - SalesLine."Inv. Discount Amount";
TotalLineDiscAmtRemaining := TotalLineDiscAmtRemaining - SalesLine."Line Discount Amount";
TotalLineAmtRemaining := TotalLineAmtRemaining - SalesLine."Line Amount";
TotalQtyRemaining := TotalQtyRemaining - QtyToAssign;
// End of the added lines.
SalesLine.Amount := ROUND(SalesLine.Amount,GLSetup."Amount Rounding Precision") - TotalChargeAmtLCY;
IF SalesHeader."Currency Code" <> '' THEN
TotalChargeAmtLCY := TotalChargeAmtLCY + SalesLine.Amount;
SalesLine."Unit Cost (LCY)" := ROUND(
... -
Изменения в код в свойствах thePurch.-учет программный блок (90) следующим образом:
Существующий код 1...3:
ERROR(Text015);
PurchLine.Type::"Charge (Item)":
IF Invoice OR ItemChargeAssgntOnly THEN BEGIN
// Delete the following line.
ItemJnlRollRndg := FALSE;
ClearItemChargeAssgntFilter;
TempItemChargeAssgntPurch.SETCURRENTKEY("Applies-to Doc. Type");
TempItemChargeAssgntPurch.SETRANGE("Document Line No.",PurchLine."Line No.");
IF TempItemChargeAssgntPurch.FINDSET THEN
...Код для замены 1
...3:
ERROR(Text015);
PurchLine.Type::"Charge (Item)":
IF Invoice OR ItemChargeAssgntOnly THEN BEGIN
// Add the following line.
ItemJnlRollRndg := TRUE;
ClearItemChargeAssgntFilter;
TempItemChargeAssgntPurch.SETCURRENTKEY("Applies-to Doc. Type");
TempItemChargeAssgntPurch.SETRANGE("Document Line No.",PurchLine."Line No.");
IF TempItemChargeAssgntPurch.FINDSET THEN
...Существующий код 2
...GenJnlLineDocNo := TempItemChargeAssgntPurch."Applies-to Doc. No.";
CASE TempItemChargeAssgntPurch."Applies-to Doc. Type" OF
TempItemChargeAssgntPurch."Applies-to Doc. Type"::Receipt:
BEGIN
// Delete the following line.
PostItemChargePerRcpt(PurchLine);
TempItemChargeAssgntPurch.MARK(TRUE);
END;
TempItemChargeAssgntPurch."Applies-to Doc. Type"::"Transfer Receipt":
BEGIN
...Код для замены 2
...GenJnlLineDocNo := TempItemChargeAssgntPurch."Applies-to Doc. No.";
CASE TempItemChargeAssgntPurch."Applies-to Doc. Type" OF
TempItemChargeAssgntPurch."Applies-to Doc. Type"::Receipt:
BEGIN
// Add the following lines.
PostItemChargePerRcpt(PurchLine,PurchLine."Inv. Discount Amount",
PurchLine.Quantity,PurchLine."Line Discount Amount",PurchLine."Line Amount");
// End of the added lines.
TempItemChargeAssgntPurch.MARK(TRUE);
END;
TempItemChargeAssgntPurch."Applies-to Doc. Type"::"Transfer Receipt":
BEGIN
...Существующий код 3
...TempItemChargeAssgntPurch.MARK(TRUE);
END;
TempItemChargeAssgntPurch."Applies-to Doc. Type"::"Transfer Receipt":
BEGIN
// Delete the following line.
PostItemChargePerTransfer(PurchLine);
TempItemChargeAssgntPurch.MARK(TRUE);
END;
TempItemChargeAssgntPurch."Applies-to Doc. Type"::"Return Shipment":
BEGIN
...Код для замены 3
...TempItemChargeAssgntPurch.MARK(TRUE);
END;
TempItemChargeAssgntPurch."Applies-to Doc. Type"::"Transfer Receipt":
BEGIN
// Add the following lines.
PostItemChargePerTransfer(PurchLine,PurchLine."Inv. Discount Amount",
PurchLine.Quantity,PurchLine."Line Discount Amount",PurchLine."Line Amount");
// End of the added lines.
TempItemChargeAssgntPurch.MARK(TRUE);
END;
TempItemChargeAssgntPurch."Applies-to Doc. Type"::"Return Shipment":
BEGIN
...Существующий код 4
...TempItemChargeAssgntPurch.MARK(TRUE);
END;
TempItemChargeAssgntPurch."Applies-to Doc. Type"::"Return Shipment":
BEGIN
// Delete the following line.
PostItemChargePerRetShpt(PurchLine);
TempItemChargeAssgntPurch.MARK(TRUE);
END;
TempItemChargeAssgntPurch."Applies-to Doc. Type"::"Sales Shipment":
BEGIN
...Код для замены 4
...TempItemChargeAssgntPurch.MARK(TRUE);
END;
TempItemChargeAssgntPurch."Applies-to Doc. Type"::"Return Shipment":
BEGIN
// Add the following lines.
PostItemChargePerRetShpt(PurchLine,PurchLine."Inv. Discount Amount",
PurchLine.Quantity,PurchLine."Line Discount Amount",PurchLine."Line Amount");
// End of the added lines.
TempItemChargeAssgntPurch.MARK(TRUE);
END;
TempItemChargeAssgntPurch."Applies-to Doc. Type"::"Sales Shipment":
BEGIN
...Существующий код 5
...TempItemChargeAssgntPurch.MARK(TRUE);
END;
TempItemChargeAssgntPurch."Applies-to Doc. Type"::"Sales Shipment":
BEGIN
// Delete the following line.
PostItemChargePerSalesShpt(PurchLine);
TempItemChargeAssgntPurch.MARK(TRUE);
END;
TempItemChargeAssgntPurch."Applies-to Doc. Type"::"Return Receipt":
BEGIN
...Код для замены 5
...TempItemChargeAssgntPurch.MARK(TRUE);
END;
TempItemChargeAssgntPurch."Applies-to Doc. Type"::"Sales Shipment":
BEGIN
// Add the following lines.
PostItemChargePerSalesShpt(PurchLine,PurchLine."Inv. Discount Amount",
PurchLine.Quantity,PurchLine."Line Discount Amount",PurchLine."Line Amount");
// End of the added lines.
TempItemChargeAssgntPurch.MARK(TRUE);
END;
TempItemChargeAssgntPurch."Applies-to Doc. Type"::"Return Receipt":
BEGIN
...Существующий код 6
...TempItemChargeAssgntPurch.MARK(TRUE);
END;
TempItemChargeAssgntPurch."Applies-to Doc. Type"::"Return Receipt":
BEGIN
// Delete the following line.
PostItemChargePerRetRcpt(PurchLine);
TempItemChargeAssgntPurch.MARK(TRUE);
END;
TempItemChargeAssgntPurch."Applies-to Doc. Type"::Order,
TempItemChargeAssgntPurch."Applies-to Doc. Type"::Invoice:
...Код для замены 6
...TempItemChargeAssgntPurch.MARK(TRUE);
END;
TempItemChargeAssgntPurch."Applies-to Doc. Type"::"Return Receipt":
BEGIN
// Add the following lines.
PostItemChargePerRetRcpt(PurchLine,PurchLine."Inv. Discount Amount",
PurchLine.Quantity,PurchLine."Line Discount Amount",PurchLine."Line Amount");
// End of the added lines.
TempItemChargeAssgntPurch.MARK(TRUE);
END;
TempItemChargeAssgntPurch."Applies-to Doc. Type"::Order,
TempItemChargeAssgntPurch."Applies-to Doc. Type"::Invoice:
... -
Измените код в функцию PostItemChargePerRcpt в thePurch.-учет программный блок (90) следующим образом:
Существующий код 1...END;
END;
END;
// Delete the following line.
LOCAL PROCEDURE PostItemChargePerRcpt@5807(PurchLine@1000 : Record 39);
VAR
PurchRcptLine@1002 : Record 121;
TempItemLedgEntry@1003 : TEMPORARY Record 32;
ItemTrackingMgt@1005 : Codeunit 6500;
...Код для замены 1
...END;
END;
END;
// Add the following line.
LOCAL PROCEDURE PostItemChargePerRcpt@5807(PurchLine@1000 : Record 39;VAR TotalInvDiscAmtRemaining@1012 : Decimal;VAR TotalQtyRemaining@1013 : Decimal;VAR TotalLineDiscAmtRemaining@1014 : Decimal;VAR TotalLineAmtRemaining@1015 : Decimal);
VAR
PurchRcptLine@1002 : Record 121;
TempItemLedgEntry@1003 : TEMPORARY Record 32;
ItemTrackingMgt@1005 : Codeunit 6500;
...Существующий код 2
...AmountToAssign := ROUND(NonDistrAmountToAssign * Factor,GLSetup."Amount Rounding Precision");
IF Factor < 1 THEN BEGIN
PostItemCharge(PurchLine,
TempItemLedgEntry."Entry No.",TempItemLedgEntry.Quantity,
// Delete the following line.
AmountToAssign * Sign,QtyToAssign,PurchRcptLine."Indirect Cost %");
NonDistrQuantity := NonDistrQuantity - TempItemLedgEntry.Quantity;
NonDistrQtyToAssign := NonDistrQtyToAssign - QtyToAssign;
NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
...Код для замены 2
...AmountToAssign := ROUND(NonDistrAmountToAssign * Factor,GLSetup."Amount Rounding Precision");
IF Factor < 1 THEN BEGIN
PostItemCharge(PurchLine,
TempItemLedgEntry."Entry No.",TempItemLedgEntry.Quantity,
// Add the following lines.
AmountToAssign * Sign,QtyToAssign,PurchRcptLine."Indirect Cost %",
TotalInvDiscAmtRemaining,TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining);
// End of the added lines.
NonDistrQuantity := NonDistrQuantity - TempItemLedgEntry.Quantity;
NonDistrQtyToAssign := NonDistrQtyToAssign - QtyToAssign;
NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
...Существующий код 3
...NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
PostItemCharge(PurchLine,
TempItemLedgEntry."Entry No.",TempItemLedgEntry.Quantity,
// Delete the following line.
NonDistrAmountToAssign * Sign,NonDistrQtyToAssign,PurchRcptLine."Indirect Cost %");
UNTIL TempItemLedgEntry.NEXT = 0;
END ELSE
ERROR(Text042)
ELSE
...Код для замены 3
...NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
PostItemCharge(PurchLine,
TempItemLedgEntry."Entry No.",TempItemLedgEntry.Quantity,
// Add the following lines.
NonDistrAmountToAssign * Sign,NonDistrQtyToAssign,PurchRcptLine."Indirect Cost %",
TotalInvDiscAmtRemaining,TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining);
// End of the added lines.
UNTIL TempItemLedgEntry.NEXT = 0;
END ELSE
ERROR(Text042)
ELSE
...Существующий код 4
...PostItemCharge(PurchLine,
PurchRcptLine."Item Rcpt. Entry No.",PurchRcptLine."Quantity (Base)",
TempItemChargeAssgntPurch."Amount to Assign" * Sign,
TempItemChargeAssgntPurch."Qty. to Assign",
// Delete the following lines.
PurchRcptLine."Indirect Cost %");
END;
LOCAL PROCEDURE PostItemChargePerRetShpt@5811(PurchLine@1000 : Record 39);
// End of the deleted lines.
VAR
ReturnShptLine@1002 : Record 6651;
TempItemLedgEntry@1010 : TEMPORARY Record 32;
ItemTrackingMgt@1009 : Codeunit 6500;
...Код для замены 4
...PostItemCharge(PurchLine,
PurchRcptLine."Item Rcpt. Entry No.",PurchRcptLine."Quantity (Base)",
TempItemChargeAssgntPurch."Amount to Assign" * Sign,
TempItemChargeAssgntPurch."Qty. to Assign",
// Add the following lines.
PurchRcptLine."Indirect Cost %",TotalInvDiscAmtRemaining,
TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining);
END;
LOCAL PROCEDURE PostItemChargePerRetShpt@5811(PurchLine@1000 : Record 39;VAR TotalInvDiscAmtRemaining@1012 : Decimal;VAR TotalQtyRemaining@1013 : Decimal;VAR TotalLineDiscAmtRemaining@1014 : Decimal;VAR TotalLineAmtRemaining@1015 : Decimal);
// End of the added lines.
VAR
ReturnShptLine@1002 : Record 6651;
TempItemLedgEntry@1010 : TEMPORARY Record 32;
ItemTrackingMgt@1009 : Codeunit 6500;
... -
Измените код в функцию PostItemChargePerRetShpt в thePurch.-учет программный блок (90) следующим образом:
Существующий код 1...AmountToAssign := ROUND(NonDistrAmountToAssign * Factor,GLSetup."Amount Rounding Precision");
IF Factor < 1 THEN BEGIN
PostItemCharge(PurchLine,
TempItemLedgEntry."Entry No.",TempItemLedgEntry.Quantity,
// Delete the following line.
AmountToAssign * Sign,QtyToAssign,ReturnShptLine."Indirect Cost %");
NonDistrQuantity := NonDistrQuantity - TempItemLedgEntry.Quantity;
NonDistrQtyToAssign := NonDistrQtyToAssign - QtyToAssign;
NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
...Код для замены 1
...AmountToAssign := ROUND(NonDistrAmountToAssign * Factor,GLSetup."Amount Rounding Precision");
IF Factor < 1 THEN BEGIN
PostItemCharge(PurchLine,
TempItemLedgEntry."Entry No.",TempItemLedgEntry.Quantity,
// Add the following lines.
AmountToAssign * Sign,QtyToAssign,ReturnShptLine."Indirect Cost %",TotalInvDiscAmtRemaining,
TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining);
// End of the added lines.
NonDistrQuantity := NonDistrQuantity - TempItemLedgEntry.Quantity;
NonDistrQtyToAssign := NonDistrQtyToAssign - QtyToAssign;
NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
...Существующий код 2
...NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
PostItemCharge(PurchLine,
TempItemLedgEntry."Entry No.",TempItemLedgEntry.Quantity,
// Delete the following line.
NonDistrAmountToAssign * Sign,NonDistrQtyToAssign,ReturnShptLine."Indirect Cost %");
UNTIL TempItemLedgEntry.NEXT = 0;
END ELSE
ERROR(Text042)
ELSE
...Код для замены 2
...NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
PostItemCharge(PurchLine,
TempItemLedgEntry."Entry No.",TempItemLedgEntry.Quantity,
// Add the following lines.
NonDistrAmountToAssign * Sign,NonDistrQtyToAssign,ReturnShptLine."Indirect Cost %",TotalInvDiscAmtRemaining,
TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining);
// End of the added lines.
UNTIL TempItemLedgEntry.NEXT = 0;
END ELSE
ERROR(Text042)
ELSE
...Существующий код 3
...PostItemCharge(PurchLine,
ReturnShptLine."Item Shpt. Entry No.",-ReturnShptLine."Quantity (Base)",
ABS(TempItemChargeAssgntPurch."Amount to Assign") * Sign,
TempItemChargeAssgntPurch."Qty. to Assign",
// Delete the following lines.
ReturnShptLine."Indirect Cost %");
END;
LOCAL PROCEDURE PostItemChargePerTransfer@23(PurchLine@1000 : Record 39);
// End of the deleted lines.
VAR
TransRcptLine@1002 : Record 5747;
ItemApplnEntry@1003 : Record 339;
DummyTrackingSpecification@1001 : Record 336;
...Код для замены 3
...PostItemCharge(PurchLine,
ReturnShptLine."Item Shpt. Entry No.",-ReturnShptLine."Quantity (Base)",
ABS(TempItemChargeAssgntPurch."Amount to Assign") * Sign,
TempItemChargeAssgntPurch."Qty. to Assign",
// Add the following lines.
ReturnShptLine."Indirect Cost %",TotalInvDiscAmtRemaining,
TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining);
END;
LOCAL PROCEDURE PostItemChargePerTransfer@23(PurchLine@1000 : Record 39;VAR TotalInvDiscAmtRemaining@1016 : Decimal;VAR TotalQtyRemaining@1017 : Decimal;VAR TotalLineDiscAmtRemaining@1018 : Decimal;VAR TotalLineAmtRemaining@1019 : Decimal);
// End of the added lines.
VAR
TransRcptLine@1002 : Record 5747;
ItemApplnEntry@1003 : Record 339;
DummyTrackingSpecification@1001 : Record 336;
... -
Измените код в функцию PostItemChargePerTransfer в thePurch.-учет следующим программный блок (90)
Существующий код...PurchLine."Bin Code" := '';
PurchLine."Line No." := "Document Line No.";
IF TransRcptLine."Item Rcpt. Entry No." = 0 THEN
// Delete the following line.
PostItemChargePerITTransfer(PurchLine,TransRcptLine)
ELSE BEGIN
TotalAmountToPostFCY := "Amount to Assign";
IF PurchHeader."Currency Code" <> '' THEN
TotalAmountToPostLCY :=
...Код для замены
...PurchLine."Bin Code" := '';
PurchLine."Line No." := "Document Line No.";
IF TransRcptLine."Item Rcpt. Entry No." = 0 THEN
// Add the following lines.
PostItemChargePerITTransfer(PurchLine,TransRcptLine,TotalInvDiscAmtRemaining,
TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining)
// End of the added lines.
ELSE BEGIN
TotalAmountToPostFCY := "Amount to Assign";
IF PurchHeader."Currency Code" <> '' THEN
TotalAmountToPostLCY :=
... -
Измените код в функцию PostItemChargePerITTransfer в thePurch.-учет программный блок (90) следующим образом:
Существующий код 1...END;
END;
END;
// Delete the following line.
LOCAL PROCEDURE PostItemChargePerITTransfer@43(PurchLine@1000 : Record 39;TransRcptLine@1017 : Record 5747);
VAR
TempItemLedgEntry@1016 : TEMPORARY Record 32;
ItemTrackingMgt@1001 : Codeunit 6500;
Factor@1023 : Decimal;
...Код для замены 1
...END;
END;
END;
// Add the following line.
LOCAL PROCEDURE PostItemChargePerITTransfer@43(PurchLine@1000 : Record 39;TransRcptLine@1017 : Record 5747;VAR TotalInvDiscAmtRemaining@1026 : Decimal;VAR TotalQtyRemaining@1024 : Decimal;VAR TotalLineDiscAmtRemaining@1025 : Decimal;VAR TotalLineAmtRemaining@1030 : Decimal);
VAR
TempItemLedgEntry@1016 : TEMPORARY Record 32;
ItemTrackingMgt@1001 : Codeunit 6500;
Factor@1023 : Decimal;
...Существующий код 2
...AmountToAssign := ROUND(NonDistrAmountToAssign * Factor,GLSetup."Amount Rounding Precision");
IF Factor < 1 THEN BEGIN
PostItemCharge(PurchLine,
TempItemLedgEntry."Entry No.",TempItemLedgEntry.Quantity,
// Delete the following line.
AmountToAssign,QtyToAssign,0);
NonDistrQuantity := NonDistrQuantity - TempItemLedgEntry.Quantity;
NonDistrQtyToAssign := NonDistrQtyToAssign - QtyToAssign;
NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
...Код для замены 2
...AmountToAssign := ROUND(NonDistrAmountToAssign * Factor,GLSetup."Amount Rounding Precision");
IF Factor < 1 THEN BEGIN
PostItemCharge(PurchLine,
TempItemLedgEntry."Entry No.",TempItemLedgEntry.Quantity,
// Add the following lines.
AmountToAssign,QtyToAssign,0,TotalInvDiscAmtRemaining,
TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining);
// End of the added lines.
NonDistrQuantity := NonDistrQuantity - TempItemLedgEntry.Quantity;
NonDistrQtyToAssign := NonDistrQtyToAssign - QtyToAssign;
NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
...Существующий код 3
...NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
PostItemCharge(PurchLine,
TempItemLedgEntry."Entry No.",TempItemLedgEntry.Quantity,
// Delete the following line.
NonDistrAmountToAssign,NonDistrQtyToAssign,0);
UNTIL TempItemLedgEntry.NEXT = 0;
END ELSE
ERROR(Text042);
END;
...Код для замены 3
...NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
PostItemCharge(PurchLine,
TempItemLedgEntry."Entry No.",TempItemLedgEntry.Quantity,
// Add the following lines.
NonDistrAmountToAssign,NonDistrQtyToAssign,0,TotalInvDiscAmtRemaining,
TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining);
// End of the added lines.
UNTIL TempItemLedgEntry.NEXT = 0;
END ELSE
ERROR(Text042);
END;
... -
Измените код в функцию PostItemChargePerSalesShpt в thePurch.-учет программный блок (90) следующим образом:
Существующий код 1...ERROR(Text042);
END;
END;
// Delete the following line.
LOCAL PROCEDURE PostItemChargePerSalesShpt@41(PurchLine@1000 : Record 39);
VAR
SalesShptLine@1002 : Record 111;
TempItemLedgEntry@1010 : TEMPORARY Record 32;
ItemTrackingMgt@1009 : Codeunit 6500;
...Код для замены 1
...ERROR(Text042);
END;
END;
// Add the following line.
LOCAL PROCEDURE PostItemChargePerSalesShpt@41(PurchLine@1000 : Record 39;VAR TotalInvDiscAmtRemaining@1012 : Decimal;VAR TotalQtyRemaining@1013 : Decimal;VAR TotalLineDiscAmtRemaining@1014 : Decimal;VAR TotalLineAmtRemaining@1015 : Decimal);
VAR
SalesShptLine@1002 : Record 111;
TempItemLedgEntry@1010 : TEMPORARY Record 32;
ItemTrackingMgt@1009 : Codeunit 6500;
...Существующий код 2
...AmountToAssign := ROUND(NonDistrAmountToAssign * Factor,GLSetup."Amount Rounding Precision");
IF Factor < 1 THEN BEGIN
PostItemCharge(PurchLine,
TempItemLedgEntry."Entry No.",TempItemLedgEntry.Quantity,
// Delete the following line.
AmountToAssign * Sign,QtyToAssign,0);
NonDistrQuantity := NonDistrQuantity - TempItemLedgEntry.Quantity;
NonDistrQtyToAssign := NonDistrQtyToAssign - QtyToAssign;
NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
...Код для замены 2
...AmountToAssign := ROUND(NonDistrAmountToAssign * Factor,GLSetup."Amount Rounding Precision");
IF Factor < 1 THEN BEGIN
PostItemCharge(PurchLine,
TempItemLedgEntry."Entry No.",TempItemLedgEntry.Quantity,
// Add the following lines.
AmountToAssign * Sign,QtyToAssign,0,TotalInvDiscAmtRemaining,
TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining);
// End of the added lines.
NonDistrQuantity := NonDistrQuantity - TempItemLedgEntry.Quantity;
NonDistrQtyToAssign := NonDistrQtyToAssign - QtyToAssign;
NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
...Существующий код 3
...NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
PostItemCharge(PurchLine,
TempItemLedgEntry."Entry No.",TempItemLedgEntry.Quantity,
// Delete the following line.
NonDistrAmountToAssign * Sign,NonDistrQtyToAssign,0);
UNTIL TempItemLedgEntry.NEXT = 0;
END ELSE
ERROR(Text042)
ELSE
...Код для замены 3
...NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
PostItemCharge(PurchLine,
TempItemLedgEntry."Entry No.",TempItemLedgEntry.Quantity,
// Add the following lines.
NonDistrAmountToAssign * Sign,NonDistrQtyToAssign,0,TotalInvDiscAmtRemaining,
TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining);
// End of the added lines.
UNTIL TempItemLedgEntry.NEXT = 0;
END ELSE
ERROR(Text042)
ELSE
...Существующий код 4
...ELSE
PostItemCharge(PurchLine,
SalesShptLine."Item Shpt. Entry No.",-SalesShptLine."Quantity (Base)",
TempItemChargeAssgntPurch."Amount to Assign" * Sign,
// Delete the following lines.
TempItemChargeAssgntPurch."Qty. to Assign",0)
END;
PROCEDURE PostItemChargePerRetRcpt@37(PurchLine@1001 : Record 39);
// End of the deleted lines.
VAR
ReturnRcptLine@1000 : Record 6661;
TempItemLedgEntry@1011 : TEMPORARY Record 32;
ItemTrackingMgt@1010 : Codeunit 6500;
...Код для замены 4
...ELSE
PostItemCharge(PurchLine,
SalesShptLine."Item Shpt. Entry No.",-SalesShptLine."Quantity (Base)",
TempItemChargeAssgntPurch."Amount to Assign" * Sign,
// Add the following lines.
TempItemChargeAssgntPurch."Qty. to Assign",0,TotalInvDiscAmtRemaining,
TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining)
END;
PROCEDURE PostItemChargePerRetRcpt@37(PurchLine@1001 : Record 39;VAR TotalInvDiscAmtRemaining@1012 : Decimal;VAR TotalQtyRemaining@1013 : Decimal;VAR TotalLineDiscAmtRemaining@1014 : Decimal;VAR TotalLineAmtRemaining@1015 : Decimal);
// End of the added lines.
VAR
ReturnRcptLine@1000 : Record 6661;
TempItemLedgEntry@1011 : TEMPORARY Record 32;
ItemTrackingMgt@1010 : Codeunit 6500;
... -
Измените код в функцию PostItemChargePerRetRcpt в thePurch.-учет программный блок (90) следующим образом:
Существующий код 1...AmountToAssign := ROUND(NonDistrAmountToAssign * Factor,GLSetup."Amount Rounding Precision");
IF Factor < 1 THEN BEGIN
PostItemCharge(PurchLine,
TempItemLedgEntry."Entry No.",TempItemLedgEntry.Quantity,
// Delete the following line.
AmountToAssign * Sign,QtyToAssign,0);
NonDistrQuantity := NonDistrQuantity - TempItemLedgEntry.Quantity;
NonDistrQtyToAssign := NonDistrQtyToAssign - QtyToAssign;
NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
...Код для замены 1
...AmountToAssign := ROUND(NonDistrAmountToAssign * Factor,GLSetup."Amount Rounding Precision");
IF Factor < 1 THEN BEGIN
PostItemCharge(PurchLine,
TempItemLedgEntry."Entry No.",TempItemLedgEntry.Quantity,
// Add the following lines.
AmountToAssign * Sign,QtyToAssign,0,TotalInvDiscAmtRemaining,
TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining);
// End of the added lines.
NonDistrQuantity := NonDistrQuantity - TempItemLedgEntry.Quantity;
NonDistrQtyToAssign := NonDistrQtyToAssign - QtyToAssign;
NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
...Существующий код 2
...NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
PostItemCharge(PurchLine,
TempItemLedgEntry."Entry No.",TempItemLedgEntry.Quantity,
// Delete the following line.
NonDistrAmountToAssign * Sign,NonDistrQtyToAssign,0);
UNTIL TempItemLedgEntry.NEXT = 0;
END ELSE
ERROR(Text042)
ELSE
...Код для замены 2
...NonDistrAmountToAssign := NonDistrAmountToAssign - AmountToAssign;
END ELSE // the last time
PostItemCharge(PurchLine,
TempItemLedgEntry."Entry No.",TempItemLedgEntry.Quantity,
// Add the following lines.
NonDistrAmountToAssign * Sign,NonDistrQtyToAssign,0,TotalInvDiscAmtRemaining,
TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining);
// End of the added lines.
UNTIL TempItemLedgEntry.NEXT = 0;
END ELSE
ERROR(Text042)
ELSE
...Существующий код 3
...ELSE
PostItemCharge(PurchLine,
ReturnRcptLine."Item Rcpt. Entry No.",ReturnRcptLine."Quantity (Base)",
TempItemChargeAssgntPurch."Amount to Assign" * Sign,
// Delete the following line.
TempItemChargeAssgntPurch."Qty. to Assign",0)
END;
LOCAL PROCEDURE PostAssocItemJnlLine@3(QtyToBeShipped@1000 : Decimal;QtyToBeShippedBase@1001 : Decimal) : Integer;
VAR
...Код для замены 3
...ELSE
PostItemCharge(PurchLine,
ReturnRcptLine."Item Rcpt. Entry No.",ReturnRcptLine."Quantity (Base)",
TempItemChargeAssgntPurch."Amount to Assign" * Sign,
// Add the following lines.
TempItemChargeAssgntPurch."Qty. to Assign",0,TotalInvDiscAmtRemaining,
TotalQtyRemaining,TotalLineDiscAmtRemaining,TotalLineAmtRemaining)
// End of the added lines.
END;
LOCAL PROCEDURE PostAssocItemJnlLine@3(QtyToBeShipped@1000 : Decimal;QtyToBeShippedBase@1001 : Decimal) : Integer;
VAR
... -
Измените код в функцию PostItemCharge в thePurch.-учет программный блок (90) следующим образом:
Существующий код 1...TempValueEntryRelation.DELETEALL;
END;
END;
// Delete the following line.
LOCAL PROCEDURE PostItemCharge@42(PurchLine@1000 : Record 39;ItemEntryNo@1004 : Integer;QuantityBase@1005 : Decimal;AmountToAssign@1006 : Decimal;QtyToAssign@1007 : Decimal;IndirectCostPct@1008 : Decimal);
VAR
DummyTrackingSpecification@1001 : Record 336;
BEGIN
WITH TempItemChargeAssgntPurch DO BEGIN
...Код для замены 1
...TempValueEntryRelation.DELETEALL;
END;
END;
// Add the following line.
LOCAL PROCEDURE PostItemCharge@42(PurchLine@1000 : Record 39;ItemEntryNo@1004 : Integer;QuantityBase@1005 : Decimal;AmountToAssign@1006 : Decimal;QtyToAssign@1007 : Decimal;IndirectCostPct@1008 : Decimal;VAR TotalInvDiscAmtRemaining@1009 : Decimal;VAR TotalQtyRemaining@1010 : Decimal;VAR TotalLineDiscAmtRemaining@1011 : Decimal;VAR TotalLineAmtRemaining@1012 : Decimal);
VAR
DummyTrackingSpecification@1001 : Record 336;
BEGIN
WITH TempItemChargeAssgntPurch DO BEGIN
...Существующий код 2
...ROUND(
PurchLine.Amount / QuantityBase,GLSetup."Unit-Amount Rounding Precision");
PurchLine."Inv. Discount Amount" := ROUND(
// Delete the following lines.
PurchLine."Inv. Discount Amount" / PurchLine.Quantity * QtyToAssign,
GLSetup."Amount Rounding Precision");
PurchLine."Line Discount Amount" := ROUND(
PurchLine."Line Discount Amount" / PurchLine.Quantity * QtyToAssign,
GLSetup."Amount Rounding Precision");
// End of the deleted lines.
PostItemJnlLine(
PurchLine,
0,0,
QuantityBase,QuantityBase,
...Код для замены 2
...ROUND(
PurchLine.Amount / QuantityBase,GLSetup."Unit-Amount Rounding Precision");
PurchLine."Inv. Discount Amount" := ROUND(
// Add the following lines.
TotalInvDiscAmtRemaining / TotalQtyRemaining * QtyToAssign,
GLSetup."Amount Rounding Precision");
PurchLine."Line Discount Amount" := ROUND(
TotalLineDiscAmtRemaining / TotalQtyRemaining * QtyToAssign,
GLSetup."Amount Rounding Precision");
PurchLine."Line Amount" := ROUND(
TotalLineAmtRemaining / TotalQtyRemaining * QtyToAssign,
GLSetup."Amount Rounding Precision");
TotalInvDiscAmtRemaining := TotalInvDiscAmtRemaining - PurchLine."Inv. Discount Amount";
TotalLineDiscAmtRemaining := TotalLineDiscAmtRemaining - PurchLine."Line Discount Amount";
TotalLineAmtRemaining := TotalLineAmtRemaining - PurchLine."Line Amount";
TotalQtyRemaining := TotalQtyRemaining - QtyToAssign;
// End of the added lines.
PostItemJnlLine(
PurchLine,
0,0,
QuantityBase,QuantityBase,
...
Предварительные условия
Необходимы следующие продукты для установки данного исправления.
-
Microsoft Dynamics NAV 2009 R2
-
Microsoft Dynamics NAV 2009 SP1
Сведения об удалении
Установленное обновление удалить нельзя.
Статус
Корпорация Майкрософт подтверждает, что это проблема продуктов Майкрософт, перечисленных в разделе "Относится к".
Примечание. Это статья «БЫСТРАЯ ПУБЛИКАЦИЯ», созданная непосредственно из технической поддержки корпорации Майкрософт. Сведения, содержащиеся в настоящем документе, предоставляются "как есть" в ответ на возникающие проблемы. В результате скорости предоставления материалов они могут включать опечаток и быть изменены в любое время без предварительного уведомления. Другие вопросы, связанные с Условиями использованиясм.
