No Ball on Table in 3D Pinball

Article translations Article translations
Article ID: 138990 - View products that this article applies to.
This article was previously published under Q138990
This article has been archived. It is offered "as is" and will no longer be updated.
Expand all | Collapse all

Symptoms

When you play 3D Pinball, or click Demo to watch a demonstration, no ball may be loaded on the table. When this occurs, the flippers, sound, music, and plunger still work, and the displayed status is "Awaiting deployment."

Cause

This problem can occur on computers with a faulty math coprocessor, or when an incompatibility exists between the math coprocessor and an outdated system BIOS.

Resolution

To work around this problem, disable the math coprocessor in Device Manager. To do so, follow these steps:
  1. In Control Panel, double-click the System icon.
  2. On the Device Manager tab, double-click System Devices, and then double-click Numeric Data Processor.
  3. On the Settings tab, click "Never use the numeric data processor," and then click OK.
NOTE: This resolution is a temporary workaround only for 3D Pinball. When you use the "Never use the numeric data processor" option, you may not be able to run programs that depend on the use of a math coprocessor.

Status

Microsoft has confirmed this to be a problem in Microsoft Plus! for Windows 95, version 1.0. We are researching this problem and will post new information here in the Microsoft Knowledge Base as it becomes available.

More information

3D Pinball uses floating-point calculations, and may attempt to use the math coprocessor if one is present.

Properties

Article ID: 138990 - Last Review: October 26, 2013 - Revision: 2.0
Applies to
  • Microsoft Plus! 95 Standard Edition
Keywords: 
kbnosurvey kbarchive KB138990

Contact us for more help

Contact us for more help
Connect with Answer Desk for expert help.
Get more support from smallbusiness.support.microsoft.com