Err Msg: STOP 0x00000035 When Using TDITrace from the Windows NT Resource Kit

Article translations Article translations
Article ID: 228911 - View products that this article applies to.
This article was previously published under Q228911
This article has been archived. It is offered "as is" and will no longer be updated.
Expand all | Collapse all

Symptoms

When you use the Network tool in Control Panel to install the TDITrace protocol from the Windows NT 4.0 resource kit, your computer may display the following error message:
STOP 0x00000035 (0xff787dc8, 0x00000000, 0x00000000, 0x00000000)
The first parameter may vary.

Cause

This behavior occurs because of an old Oemsetup.inf file that was placed in the Common\Netdiag\Tditrace subfolder of the initial Windows NT 4.0 Resource Kit CD.

Resolution

To resolve this problem, remove and reinstall the TDITrace protocol using the updated Oemsetup.inf file from the latest Windows NT resource kit.

NOTE: This driver can be installed in both Windows NT 3.51 and Windows NT 4.0.

Status

Microsoft has confirmed that this is a problem in the TDITrace protocol.

Properties

Article ID: 228911 - Last Review: October 26, 2013 - Revision: 2.0
Applies to
  • Microsoft Windows NT Server 3.51
  • Microsoft Windows NT Server 4.0 Standard Edition
Keywords: 
kbnosurvey kbarchive kbbug KB228911

Give Feedback

 

Contact us for more help

Contact us for more help
Connect with Answer Desk for expert help.
Get more support from smallbusiness.support.microsoft.com