Article ID: 247114 - Last Review: March 1, 2007 - Revision: 2.2 Error Message Creating Managed SubnetThis article was previously published under Q247114 SYMPTOMS
When you try to create a managed subnet through the Quality of Service (QoS) Admission Control snap-in, you are prompted to enter the IP address of the subnet you want to add. If you do this incorrectly, you may receive the following ACS error message:
Invalid name: Subnet names must take the form WWW.XXX.YYY.ZZZ/MM, where MM is the number of unmasked bits at the front. The masked bits at the end must all be clear. Example: 255.14.252.0/22.
CAUSE
This issue can occur if you incorrectly enter the IP address of the subnet.
RESOLUTION
To resolve this issue, follow the instructions you receive in the error message. Make sure that you use a forward slash (/) and not a backslash (\).
| Article Translations
|
| United States | Change | | | All Microsoft Sites |
Back to the top
|
