STOP 0x0000001E Error in CDA1000.sys Occurs with Adaptec AAA-133U2 RAID Controller

View products that this article applies to.

This article was previously published under Q285845

Expand all | Collapse all

SYMPTOMS

When you are trying to use an Adaptec AAA-133U2 RAID Controller in your Microsoft Windows 2000-based computer, the following blue-screen STOP error may occur:

STOP 0x0000001E (0xC0000005, 0xBFF74B4E, 0x00000000,0x00000000)
Kmode_Exception_Not_Handled Address BFF74B4E @ BFF440000 cda1000.sys

Back to the top

CAUSE

This behavior can occur because the Adaptec AAA-133U2 RAID Controller is not using a driver supported by Windows 2000.

Back to the top

RESOLUTION

To resolve this behavior, contact Adaptec, which has released a supported driver for Windows 2000. See:

http://www.adaptec.com/worldwide/support/drivers_by_product.html?cat=%2FProduct%2FAAA-133U2&prodkey=AAA-133U2 (http://www.adaptec.com/worldwide/support/drivers_by_product.html?cat=%2FProduct%2FAAA-133U2&prodkey=AAA-133U2)

Back to the top

MORE INFORMATION

For more information about hardware and software vendor contact information, visit the following Microsoft Web site:

http://support.microsoft.com/gp/vendors (http://support.microsoft.com/gp/vendors)

The third-party products that are discussed in this article are manufactured by companies that are independent of Microsoft. Microsoft makes no warranty, implied or otherwise, regarding the performance or reliability of these products.

Back to the top