Article ID: 310664 - View products that this article applies to.
This article was previously published under Q310664
You computer may stop responding (hang) when you attempt to hot detach either a CD-ROM or a DVD drive from the drive bay. Typically, you hot detach the drive by either clicking the Safely Remove Hardware icon in the status area of the taskbar or by using the device bay unlock lever.
Some computers may not support hot detaching the drive and may enter Standby mode automatically when you remove the device. If you resume the computer from Standby mode without removing the drive, the computer may hang until you remove the drive from the drive bay.
This problem occurs if you select UltraDMA (Ultra direct memory access) mode for either a CD-ROM drive or a DVD drive, if the drive is in the drive bay during a hot detach procedure, and if you do not reprogram the drive for the correct transfer mode. This leaves the drive and the controller in an "out of synchronization" condition; the Mode Sense command that is issued to the drive is lost, which causes the computer to hang while waiting for a response.
To resolve this problem, obtain the latest service pack for Windows XP. For additional information, click the following article number to view the article in the Microsoft Knowledge Base:
322389The English-language version of this fix should have the following file attributes or later:
(http://support.microsoft.com/kb/322389/EN-US/ )How to Obtain the Latest Windows XP Service Pack
Date Time Version Size File name Platform ------------------------------------------------------------- 02-Nov-2001 19:11 5.1.2600.18 86,784 Atapi.sys Intel 02-Nov-2001 19:11 5.1.2600.18 304,128 Atapi.sys 64-bit
To resolve this problem, select PIO mode in your computer basic input/output system (BIOS).
Microsoft has confirmed that this is a problem in the Microsoft products that are listed at the beginning of this article. This problem was first corrected in Windows XP Service Pack 1.