Stop error message “0x000000D1” occurs in MSDSM.sys on a computer that is running Windows Server 2008

Article translations Article translations
Article ID: 2277440 - View products that this article applies to.
Expand all | Collapse all

On This Page

SYMPTOMS

Consider the following scenario:
  • You configure a computer that is running Windows Server 2008 to use Microsoft Multipath I/O (MPIO) and the Microsoft Device Specific Module.
  • You connect a storage device that is configured to use Asymmetric Logical Unit Access to the computer.
In this scenario, the operating system crashes, and you receive the following Stop error message:
STOP: 0x000000D1 ( parameter1 , parameter2 , parameter3 , parameter4 )
DRIVER_IRQL_NOT_LESS_OR_EQUAL

Notes
  • The Stop error can occur when a multipath device is being enumerated.
  • The parameters in the Stop error message may vary, depending on the configuration of the computer.
  • Not all "0x000000D1" Stop errors are caused by this issue.

CAUSE

This issue occurs because a transient error in the storage subsystem occurs so that MPIO cannot obtain the data from the SCSI inquiry page 80/83 during the multipath device enumeration. Therefore, the MPIO driver sends a NULL pointer to the Microsoft Device Specific Module driver, and you receive the Stop error message that is mentioned in the "Symptoms" section.

RESOLUTION

Hotfix information

A supported hotfix is available from Microsoft. However, this hotfix is intended to correct only the problem that is described in this article. Apply this hotfix only to systems that are experiencing the problem described in this article. This hotfix might receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next software update that contains this hotfix.

If the hotfix is available for download, there is a "Hotfix download available" section at the top of this Knowledge Base article. If this section does not appear, contact Microsoft Customer Service and Support to obtain the hotfix.

Note If additional issues occur or if any troubleshooting is required, you might have to create a separate service request. The usual support costs will apply to additional support questions and issues that do not qualify for this specific hotfix. For a complete list of Microsoft Customer Service and Support telephone numbers or to create a separate service request, visit the following Microsoft website:
http://support.microsoft.com/contactus/?ws=support
Note The "Hotfix download available" form displays the languages for which the hotfix is available. If you do not see your language, it is because a hotfix is not available for that language.

Prerequisites

To apply this hotfix, you must be running Windows Server 2008 or Windows Server 2008 Service Pack 2 (SP2).

For more information about how to obtain a Windows Server 2008 service pack, click the following article number to view the article in the Microsoft Knowledge Base:
968849 How to obtain the latest service pack for Windows Server 2008

Registry information

To use the hotfix in this package, you do not have to make any changes to the registry.

Restart requirement

You may have to restart the computer after you apply this hotfix.

Hotfix replacement information

This hotfix does not replace a previously released hotfix.

File information

The global version of this hotfix installs files that have the attributes that are listed in the following tables. The dates and the times for these files are listed in Coordinated Universal Time (UTC). The dates and the times for these files on your local computer are displayed in your local time together with your current daylight saving time (DST) bias. Additionally, the dates and the times may change when you perform certain operations on the files.
Windows Server 2008 file information notes
Important Windows Vista hotfixes and Windows Server 2008 hotfixes are included in the same packages. However, only "Windows Vista" is listed on the Hotfix Request page. To request the hotfix package that applies to one or both operating systems, select the hotfix that is listed under "Windows Vista" on the page. Always refer to the "Applies To" section in articles to determine the actual operating system that each hotfix applies to.
  • The files that apply to a specific product, SR_Level (RTM, SPn), and service branch (LDR, GDR) can be identified by examining the file version numbers as shown in the following table.
    Collapse this tableExpand this table
    VersionProductSR_LevelService branch
    6.0.600 1 . 22xxxWindows Server 2008SP1LDR
    6.0.600 2 . 22xxxWindows Server 2008SP2LDR
  • Service Pack 1 is integrated into the release version of Windows Server 2008.
  • The MANIFEST files (.manifest) and the MUM files (.mum) that are installed for each environment are listed separately in the "Additional file information for Windows Server 2008" section. MUM files and MANIFEST files, and the associated security catalog (.cat) files, are extremely important to maintain the state of the updated components. The security catalog files, for which the attributes are not listed, are signed with a Microsoft digital signature.
For all supported x86-based versions of Windows Server 2008
Collapse this tableExpand this table
File nameFile versionFile sizeDateTimePlatform
Msdsm.sys6.0.6001.2273692,04802-Aug-201021:53x86
Msdsm.sys6.0.6002.2245992,04802-Aug-201021:53x86
For all supported x64-based versions of Windows Server 2008
Collapse this tableExpand this table
File nameFile versionFile sizeDateTimePlatform
Msdsm.sys6.0.6001.22736111,50402-Aug-201021:47x64
Msdsm.sys6.0.6002.22459111,50402-Aug-201021:47x64
For all supported IA-64-based versions of Windows Server 2008
Collapse this tableExpand this table
File nameFile versionFile sizeDateTimePlatform
Msdsm.sys6.0.6001.22736276,36802-Aug-201021:42IA-64
Msdsm.sys6.0.6002.22459276,36802-Aug-201021:42IA-64

STATUS

Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the "Applies to" section.

MORE INFORMATION

For more information about software update terminology, click the following article number to view the article in the Microsoft Knowledge Base:
824684 Description of the standard terminology that is used to describe Microsoft software updates
For more information, click the following article number to view the article in the Microsoft Knowledge Base:
978500 A server that is running Windows Server 2008 R2 crashes, and Stop error 0xD1 occurs

Additional file information

Additional file information for Windows Server 2008

Additional files for all supported x86-based versions of Windows Server 2008
Collapse this tableExpand this table
File nameUpdate.mum
File versionNot applicable
File size3,078
Date (UTC)02-Aug-2010
Time (UTC)22:02
PlatformNot applicable
File nameX86_msdsm.inf_31bf3856ad364e35_6.0.6001.22736_none_cab67cdbf4bc0c0e.manifest
File versionNot applicable
File size1,664
Date (UTC)02-Aug-2010
Time (UTC)22:02
PlatformNot applicable
File nameX86_msdsm.inf_31bf3856ad364e35_6.0.6002.22459_none_cc8a4fc9f1efe519.manifest
File versionNot applicable
File size1,664
Date (UTC)02-Aug-2010
Time (UTC)22:02
PlatformNot applicable
Additional files for all supported x64-based versions of Windows Server 2008
Collapse this tableExpand this table
File nameAmd64_msdsm.inf_31bf3856ad364e35_6.0.6001.22736_none_26d5185fad197d44.manifest
File versionNot applicable
File size1,666
Date (UTC)02-Aug-2010
Time (UTC)22:02
PlatformNot applicable
File nameAmd64_msdsm.inf_31bf3856ad364e35_6.0.6002.22459_none_28a8eb4daa4d564f.manifest
File versionNot applicable
File size1,666
Date (UTC)02-Aug-2010
Time (UTC)22:02
PlatformNot applicable
File nameUpdate.mum
File versionNot applicable
File size3,102
Date (UTC)02-Aug-2010
Time (UTC)22:02
PlatformNot applicable
Additional files for all supported IA-64-based versions of Windows Server 2008
Collapse this tableExpand this table
File nameIa64_msdsm.inf_31bf3856ad364e35_6.0.6001.22736_none_cab820d1f4ba150a.manifest
File versionNot applicable
File size1,665
Date (UTC)02-Aug-2010
Time (UTC)22:02
PlatformNot applicable
File nameIa64_msdsm.inf_31bf3856ad364e35_6.0.6002.22459_none_cc8bf3bff1edee15.manifest
File versionNot applicable
File size1,665
Date (UTC)02-Aug-2010
Time (UTC)22:02
PlatformNot applicable
File nameUpdate.mum
File versionNot applicable
File size2,257
Date (UTC)02-Aug-2010
Time (UTC)22:02
PlatformNot applicable

Properties

Article ID: 2277440 - Last Review: October 14, 2010 - Revision: 2.0
APPLIES TO
  • Windows Server 2008 Service Pack 2, when used with:
    • Windows Server 2008 Datacenter
    • Windows Server 2008 Datacenter without Hyper-V
    • Windows Server 2008 Enterprise
    • Windows Server 2008 Enterprise without Hyper-V
    • Windows Server 2008 Standard
    • Windows Server 2008 Standard without Hyper-V
    • Windows Server 2008 for Itanium-Based Systems
    • Windows Server 2008 Foundation
    • Windows Web Server 2008
  • Windows Server 2008 Datacenter without Hyper-V
  • Windows Server 2008 Enterprise without Hyper-V
  • Windows Server 2008 Foundation
  • Windows Server 2008 Standard without Hyper-V
  • Windows Server 2008 Datacenter
  • Windows Server 2008 Enterprise
  • Windows Server 2008 Standard
  • Windows Web Server 2008
Keywords: 
kbautohotfix kbqfe kbhotfixserver kbfix kbsurveynew kbexpertiseinter KB2277440

Give Feedback

 

Contact us for more help

Contact us for more help
Connect with Answer Desk for expert help.
Get more support from smallbusiness.support.microsoft.com