Article ID: 284837
This article was previously published under Q284837
This article has been archived. It is offered "as is" and will no longer be updated.
After you play or record digital audio or video by using an Audio Video Control (AV/C) device, such as a 1394 AV/C hard disk or DV camcorder, the 1394 bus may stop functioning.
The error message that is displayed by your media control software will vary, but will typically indicate that one or more of the devices on the 1394 bus cannot be accessed, or has stopped working.
The Microsoft-supplied 1394 Open Host Controller Interface (OHCI) driver may attempt to lock a bus speed that is faster than the controller supports. The Ohci1394.sys driver defaults the "spd" field setting in the REQUEST_ASYNC_LOCK OUTPUT_MORE-Immediate descriptor, which may result in a fatal error if it is set over the 1394 OHCI controller's maximum speed capability.
The English version of this fix should have the following file attributes or later:
Operating Date Time Version Size File name System ------------------------------------------------------------------------ 03/08/2001 09:29pm 4.10.2228 37,040 Ohci1394.sys Windows 98 Second Edition 03/09/2001 01:08pm 4.90.3004 49,872 Ohci1394.sys Windows Me 03/21/2001 06:18pm 5.0.2195.3395 37,392 ohci1394.sys Windows 2000
Microsoft Windows 98Windows 98 version 4.10.1998 (the original release) includes limited support for 1394 technology, which was an emerging technology when Windows 98 was released. Microsoft has determined that functional upgrades to 1394 support cannot be made sufficiently reliable, and therefore has no plans to produce updates or enhancements. For this reason, Microsoft recommends that you update your operating system to a newer version if you are experiencing the problems that are documented in this article.
Microsoft Windows 98 Second EditionBefore you install the update that is described in this article, you must install the updates that are described in the following Microsoft Knowledge Base articles:
(http://support.microsoft.com/kb/242975/EN-US/ )Update for 1394 Storage Peripherals in Windows 98 Second Edition
(http://support.microsoft.com/kb/267304/EN-US/ )Trap 14 on Resume from Standby with FireWire Device
Windows 2000To resolve this problem, obtain the latest service pack for Windows 2000. For additional information, click the following article number to view the article in the Microsoft Knowledge Base:
(http://support.microsoft.com/kb/260910/EN-US/ )How to Obtain the Latest Windows 2000 Service Pack
Microsoft has confirmed that this is a problem in the Microsoft products that are listed at the beginning of this article. This problem was first corrected in Windows 2000 Service Pack 3.
This problem has been observed with, but is not necessarily limited to, VIA Fire VT6xxx-series IEEE 1394 chip sets.
For additional information about Windows 98 and Windows 98 Second Edition hotfixes, click the article number below to view the article in the Microsoft Knowledge Base:
206071For additional information about Windows ME hotfixes, click the article number below to view the article in the Microsoft Knowledge Base:
(http://support.microsoft.com/kb/206071/EN-US/ )General Information on Windows 98 and SE Hotfixes
(http://support.microsoft.com/kb/295413/EN-US/ )General Information About Windows Millennium Edition Hotfixes
(http://go.microsoft.com/fwlink/?LinkId=151500)for other considerations.
Contact us for more help
Connect with Answer Desk for expert help.