HOW TO: Convert an IEEE 1394 Disk Drive to a Dynamic Disk Drive in Windows XP

Article translations Article translations
Article ID: 299598 - View products that this article applies to.
This article was previously published under Q299598
This article has been archived. It is offered "as is" and will no longer be updated.
Expand all | Collapse all

On This Page

SUMMARY

This step-by-step article describes how to convert an Institute of Electrical and Electronics Engineers, Inc. (IEEE) 1394 (FireWire) disk drive to a dynamic disk drive.

NOTE: Do not convert IEEE 1394 disk drives to dynamic disk drives if they are going to be moved to other hosts. The registry manipulation that this article describes must only be used for drives that remain with a single host.

NOTE: Dynamic disks are not supported on portable computers or Microsoft Windows XP Home Edition.


Convert an IEEE 1394 Disk Drive to a Dynamic Disk Drive

To convert an IEEE 1394 disk drive to a dynamic disk drive:
  1. Start Registry Editor (Regedit.exe).
  2. Locate and click the following key in the registry:
    HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Dmadmin\Parameters\EnableDynamicConversionFor1394
  3. On the Edit menu, click Modify, and then change the Value Data field to a value of 1.
  4. Quit Registry Editor.
To easily update the registry, create a text file on the desktop with any name and a .reg extension. Enter the following lines of text exactly as they are displayed, and then include a blank line at the bottom of the file. Save the file, and then double-click the file to merge the entries into the registry. To verify that the values have been entered correctly into the registry, you can click Start, click Run, and then type: regedit.
Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\dmadmin\Parameters]

"EnableDynamicConversionFor1394"=dword:00000001
				


Troubleshooting

  • You must not use a dynamic disk on a drive that is mobile. When a dynamic disk drive is moved from one environment to another, the computer can make modifications to the Logical Disk Manager (LDM) data base. When the drive is reintegrated into the original computer, those changes can be transferred to its LDM data base.

Properties

Article ID: 299598 - Last Review: February 28, 2014 - Revision: 1.3
APPLIES TO
  • Microsoft Windows XP Professional
  • Microsoft Windows XP 64-Bit Edition
Keywords: 
kbnosurvey kbarchive kbenv kbhowto kbhowtomaster KB299598

Give Feedback

 

Contact us for more help

Contact us for more help
Connect with Answer Desk for expert help.
Get more support from smallbusiness.support.microsoft.com