Sonido, tarjetas de Blaster y la información de controlador de Windows

Seleccione idioma Seleccione idioma
Id. de artículo: 124944 - Ver los productos a los que se aplica este artículo
Expandir todo | Contraer todo

Resumen

La siguiente tarjeta de sonido Sound Blaster y soporte de Windows se ha obtenido información sobre el controlador de Creative Labs.

Más información

                                   Creative Labs
Card                 Model No.       BBS File
------------------------------------------------

Sound Blaster          1350           SBW31.EXE

Sound Blaster Pro      1330           SBPW31.EXE

Sound Blaster Pro 2    1600           SBP2W31.EXE

Sound Blaster 16       CT2770         SB16UP.EXE
(value edition)

Sound Blaster 16 ASP   CT2230 (or)    SB16UP.EXE
                       CT1740

Sound Blaster 16 MCD   CT2230         SB16UP.EXE

Sound Blaster 16 SCSI  CT1770         SB16UP.EXE

Sound Blaster AWE 32   CT3780         SBAWE32.EXE
(value edition)

Drivers Installed in the Control Panel
--------------------------------------

The following is a list of the drivers installed in the Drivers
section of the Control Panel.

Sound Blaster Pro:

   Creative Sound Blaster Pro 2 Midi Synthesizer
   Creative Sound Blaster Pro Auxiliary Audio
   Creative Sound Blaster Pro Wave and Midi

Sound Blaster 1350:

   Sound Blaster 2.0 Auxiliary  Audio
   Sound Blaster 2.0 Wave and Midi
   Sound Blaster 2.0 Sound

Sound Blaster Pro 2 and the Sound Blaster 16 ASP:

   Sound Blaster 16 Auxiliary Audio
   Sound Blaster 16 Wave and Midi
   Sound Blaster 16 Sound

Sound Blaster 16:

   Voyetra / Sound Blaster SuperSAPI FM Driver
   Creative Sound Blaster 16 Auxiliary Audio
   Creative Sound Blaster 16 Wave and MIDI

WIN.INI Settings
----------------

There are no WIN.INI settings.

SYSTEM.INI Settings
-------------------

  [386Enh]
  Device=vsbpd.386

  [Drivers]
  AUX=sbpaux.drv
  MIDI=sbpfm.drv    or   MIDI=sbp2fm.drv for Sound Blaster Pro 2
  WAVE=sbpsnd.drv
  MIDI1=sbpsnd.drv

  [Sndblst.drv]
  port=             Port, Interrupt, and DMA Channel settings for card
  int=
  dmachannel=

Special Note for Sound Blaster 16 users
---------------------------------------

The Sound Blaster 16 installation adds these drivers to the  SYSTEM.INI:

   [drivers]
   Aux=sb16aux.drv
   MIDI=sb16fm.drv
   MIDI1=sb16snd.drv
   Wave=sb16snd.drv

Sound Blaster 16 adds this section to the SYSTEM.INI

   [sndblst.drv]
   Port=220
   Int=5
   DmaChannel=1
   MidiPort=330
   HDmaChannel=5
   SaveOnExit=0
   Palette=

In some instances, the SNDBLST.DRV section in the SYSTEM.INI may be
empty. This is caused by an incomplete or failed installation of the
Sound Blaster 16 driver software. To reinstall the drivers, exit
Windows, run the INSTALL program from the SB16 directory, and select
"Setup Windows."

MIDI Mapper Settings
--------------------

The MIDI Mapper Name field for the Sound Blaster 16 should be set to SB16
Ext FM. The other Sound Blaster cards should have All FM or Ext FM for the
Name field.

Special Notes on Driver Filenames
---------------------------------

For Sound Blaster 1330, there should not be any drivers listed in the
[Drivers] section of the SYSTEM.INI file that contain a "2" in the
driver name; for example, "sbp2fm.drv" shouldn't be listed. If there
is no bass line when you play the CANYON.MID file, the SBP2FM.DRV is
probably being used instead of SBPFM.DRV. To play CANYON.MID, do the
following:

1. Open the Media Player, which is normally located in the Accessories
   group.

2. Choose MIDI Sequencer from the Device menu.

3. Choose the CANYON.MID file located in the Windows directory and
   choose OK.

4. Choose the Play button.

For earlier Sound Blaster 1600 cards, all drivers listed in the [Drivers]
section of the SYSTEM.INI file will have a "2" in the driver name. Later
Sound Blaster 1600 cards only have one driver file with a "2" in the driver
name (sbp2fm.drv).

The SET BLASTER Entry
---------------------

Specifies the base I/O address, Interrupt number (IRQ), DMA and HDMA
channels for hardware configuration.

Example:

SET BLASTER=A220 I5 D1 H5 P330 T6

   A--Specifies the Sound Blaster 16 base I/O port
   I-- Specifies the Interrupt request line
   D-- Specifies the DMA channel
   H-- Specifies the HDMA channel
   P-- Specifies the MPU-401 base I/O port
   T-- Specifies the card type

How to Tell What Type of Card You Have
--------------------------------------

The "T" entry on the Set Blaster line indicates what type of card you
have.

This T Entry       Means you have this card type
------------------------------------------------

T6                 All 16 bit Sound Blaster cards are type 6.
T5                 The 8 bit Pro card is type 5.
T4                 (card #1600) The SB PRO is type 4.
T3                 (card #1350) A parameter of type 3 indicates an old
                               Sound Blaster card
T2                 (card #1330) All 8 bit cards are type 2.

Note that the only way to be absolutely sure of your card type is to open
your computer and look at the card.

Other Sound Blaster Environment Settings
----------------------------------------

SET MIDI=SYNTH:<1 or 2> MAP:<G or E or B>

In the above setting, <1 or 2> specifies the MIDI file format used (1 is an
FM chip, 2 is an MPU-401 port), and <G or E or B> is where the MIDI data is
sent to (G is General MIDI, E is Extended MIDI, and B is Basic MIDI).

SET SOUND=<path>

Specifies the directory location of SB16 drivers and software.

For additional information, contact Creative Labs:

 - Technical support (405) 742-6655
 - Recorded frequently asked questions (405) 742-6622
 - Creative Labs BBS (File Section A): (405) 742-6660

The Creative Labs products included here are manufactured by a vendor
independent of Microsoft; we make no warranty, implied or otherwise,
regarding these products' performance or reliability.
				

Propiedades

Id. de artículo: 124944 - Última revisión: miércoles, 23 de enero de 2002 - Versión: 1.1
La información de este artículo se refiere a:
  • Microsoft Windows 3.1 Standard Edition
  • Microsoft Windows 3.11 Standard Edition
  • Microsoft Windows para Trabajo en Grupo 3.2
Palabras clave: 
kbmt kbhowto KB124944 KbMtes
Traducción automática
IMPORTANTE: Este artículo ha sido traducido por un software de traducción automática de Microsoft (http://support.microsoft.com/gp/mtdetails) en lugar de un traductor humano. Microsoft le ofrece artículos traducidos por un traductor humano y artículos traducidos automáticamente para que tenga acceso en su propio idioma a todos los artículos de nuestra base de conocimientos (Knowledge Base). Sin embargo, los artículos traducidos automáticamente pueden contener errores en el vocabulario, la sintaxis o la gramática, como los que un extranjero podría cometer al hablar el idioma. Microsoft no se hace responsable de cualquier imprecisión, error o daño ocasionado por una mala traducción del contenido o como consecuencia de su utilización por nuestros clientes. Microsoft suele actualizar el software de traducción frecuentemente.
Haga clic aquí para ver el artículo original (en inglés): 124944

Enviar comentarios

 

Contact us for more help

Contact us for more help
Connect with Answer Desk for expert help.
Get more support from smallbusiness.support.microsoft.com