"0x0000000A" Stop error occurs during the shutdown process on a computer that is running Windows Server 2008 and has more than 64 processors installed

文書翻訳 文書翻訳
文書番号: 2517752 - 対象製品
すべて展開する | すべて折りたたむ

目次

現象

Consider the following scenario:
  • You install some Intel Westmere processors on a computer that is running Windows Server 2008.
  • The computer has more than 64 processors. For example, the computer has 8 10-core Intel Westmere processors.
  • You try to shut down the computer.
In this scenario, you receive an error message that resembles the following during the shutdown process:
STOP: 0x0000000A (parameter1, parameter2, parameter3, parameter4)
IRQL_NOT_LESS_OR_EQUAL
Notes
  • The parameters in this Stop error message vary, depending on the configuration of the computer.
  • Not all "0x0000000A" Stop errors are caused by this problem.

原因

This issue occurs because of a calculation error in the processor selection function. This causes Windows to schedule a thread on a processor that does not exist. Therefore, you receive this Stop error message that described in the "Symptoms" section.

解決方法

Hotfix information

A supported hotfix is available from Microsoft. However, this hotfix is intended to correct only the problem that is described in this article. Apply this hotfix only to systems that are experiencing the problem described in this article. This hotfix might receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next software update that contains this hotfix.

If the hotfix is available for download, there is a "Hotfix download available" section at the top of this Knowledge Base article. If this section does not appear, contact Microsoft Customer Service and Support to obtain the hotfix.

Note If additional issues occur or if any troubleshooting is required, you might have to create a separate service request. The usual support costs will apply to additional support questions and issues that do not qualify for this specific hotfix. For a complete list of Microsoft Customer Service and Support telephone numbers or to create a separate service request, visit the following Microsoft Web site:
http://support.microsoft.com/contactus/?ws=support
Note The "Hotfix download available" form displays the languages for which the hotfix is available. If you do not see your language, it is because a hotfix is not available for that language.

Prerequisites

To apply this hotfix, you must be running Windows Server 2008 Service Pack 2 (SP2) on the computer. For more information about how to obtain a Windows Server 2008 service pack, click the following article number to view the article in the Microsoft Knowledge Base:
968849 How to obtain the latest service pack for Windows Server 2008

Registry information

To use the hotfix in this package, you do not have to make any changes to the registry.

Restart requirement

You must restart the computer after you apply this hotfix.

Hotfix replacement information

This hotfix does not replace a previously released hotfix.

File information

The global version of this hotfix installs files that have the attributes that are listed in the following tables. The dates and the times for these files are listed in Coordinated Universal Time (UTC). The dates and the times for these files on your local computer are displayed in your local time together with your current daylight saving time (DST) bias. Additionally, the dates and the times may change when you perform certain operations on the files.
Windows Server 2008 file information notes
Important Windows Vista hotfixes and Windows Server 2008 hotfixes are included in the same packages. However, only "Windows Vista" is listed on the Hotfix Request page. To request the hotfix package that applies to one or both operating systems, select the hotfix that is listed under "Windows Vista" on the page. Always refer to the "Applies To" section in articles to determine the actual operating system that each hotfix applies to.
  • The files that apply to a specific product, SR_Level (RTM, SPn), and service branch (LDR, GDR) can be identified by examining the file version numbers as shown in the following table.
    元に戻す全体を表示する
    VersionProductSR_LevelService branch
    6.0.600 2 . 22xxxWindows Server 2008SP2LDR
  • The MANIFEST files (.manifest) and the MUM files (.mum) that are installed for each environment are listed separately in the "Additional file information for Windows Server 2008" section. MUM files and MANIFEST files, and the associated security catalog (.cat) files, are extremely important to maintain the state of the updated components. The security catalog files, for which the attributes are not listed, are signed with a Microsoft digital signature.
For all supported x64-based versions of Windows Server 2008
元に戻す全体を表示する
File nameFile versionFile sizeDateTimePlatform
Ntoskrnl.exe6.0.6002.226004,690,30402-Mar-201116:32x64

状況

Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the "Applies to" section.

詳細

For more information about performance issues that occur when more than 64 logical processors are installed in Windows Server 2008 R2 or in Windows 7, click the following article number to view the article in the Microsoft Knowledge Base:
2510206 Performance issues when more than 64 logical processors are used in Windows Server 2008 R2 or in Windows 7
For more information about the DNS Server service issues that occurs when more than 64 cores are used in Windows Server 2008 or in Windows Server 2008 R2, click the following article number to view the article in the Microsoft Knowledge Base:
2506969 The DNS Server service fails to start or fails to install on W2K8 or W2K8 R2 computers with 64 cores
For more information about software update terminology, click the following article number to view the article in the Microsoft Knowledge Base:
824684 Description of the standard terminology that is used to describe Microsoft software updates

Additional file information

Additional file information for Windows Server 2008

Additional files for all supported x64-based versions of Windows Server 2008
元に戻す全体を表示する
File nameAmd64_15490fe178c0e119ce0f43883c4f5e6c_31bf3856ad364e35_6.0.6002.22600_none_d0749cf59ee37310.manifest
File versionNot applicable
File size721
Date (UTC)02-Mar-2011
Time (UTC)21:09
PlatformNot applicable
File nameAmd64_aa7cd4cc61cde3586a1a394378e1679e_31bf3856ad364e35_6.0.6002.22600_none_93b93d63de3d2b42.manifest
File versionNot applicable
File size701
Date (UTC)02-Mar-2011
Time (UTC)21:09
PlatformNot applicable
File nameAmd64_microsoft-windows-os-kernel_31bf3856ad364e35_6.0.6002.22600_none_cabf1b0782c461c4.manifest
File versionNot applicable
File size16,512
Date (UTC)02-Mar-2011
Time (UTC)16:52
PlatformNot applicable
File nameAmd64_microsoft-windows-r..gistry-trustedtypes_31bf3856ad364e35_6.0.6002.22600_none_e28cb2f9fd096c5e.manifest
File versionNot applicable
File size7,656
Date (UTC)02-Mar-2011
Time (UTC)16:47
PlatformNot applicable
File nameUpdate.mum
File versionNot applicable
File size3,305
Date (UTC)02-Mar-2011
Time (UTC)21:09
PlatformNot applicable
注意 : これは、マイクロソフトのサポート組織内で直接作成された "緊急公開" の資料です。 この資料には、確認中の問題に関する現状ベースの情報が記載されています。 情報提供のスピードを優先するため、資料には誤植が含まれる可能性があり、予告なしに随時改定される場合があります。 その他の考慮事項については、使用条件を参照してください。

プロパティ

文書番号: 2517752 - 最終更新日: 2011年8月23日 - リビジョン: 1.0
この資料は以下の製品について記述したものです。
  • Windows Server 2008 Datacenter
  • Windows Server 2008 Datacenter without Hyper-V
  • Windows Server 2008 Enterprise
  • Windows Server 2008 Enterprise without Hyper-V
キーワード:?
kbautohotfix kbqfe kbhotfixserver kbfix kbexpertiseinter kbsurveynew KB2517752
"Microsoft Knowledge Baseに含まれている情報は、いかなる保証もない現状ベースで提供されるものです。Microsoft Corporation及びその関連会社は、市場性および特定の目的への適合性を含めて、明示的にも黙示的にも、一切の保証をいたしません。さらに、Microsoft Corporation及びその関連会社は、本文書に含まれている情報の使用及び使用結果につき、正確性、真実性等、いかなる表明・保証も行ないません。Microsoft Corporation、その関連会社及びこれらの権限ある代理人による口頭または書面による一切の情報提供またはアドバイスは、保証を意味するものではなく、かつ上記免責条項の範囲を狭めるものではありません。Microsoft Corporation、その関連会社 及びこれらの者の供給者は、直接的、間接的、偶発的、結果的損害、逸失利益、懲罰的損害、または特別損害を含む全ての損害に対して、状況のいかんを問わず一切責任を負いません。(Microsoft Corporation、その関連会社 またはこれらの者の供給者がかかる損害の発生可能性を了知している場合を含みます。) 結果的損害または偶発的損害に対する責任の免除または制限を認めていない地域においては、上記制限が適用されない場合があります。なお、本文書においては、文書の体裁上の都合により製品名の表記において商標登録表示、その他の商標表示を省略している場合がありますので、予めご了解ください。"

フィードバック

 

Contact us for more help

Contact us for more help
Connect with Answer Desk for expert help.
Get more support from smallbusiness.support.microsoft.com