Tento článek se týká aplikace Microsoft Dynamics NAV ve všech zemích a všechna národní prostředí jazyka.
Příznaky
Když zadáte hodnotu Kód adresy příjemce na prodejní objednávky v aplikaci Microsoft Dynamics NAV 2013, PSČ, města a kraje hodnoty nejsou přenášeny z karty Adresa příjemce do pole PSČ příjemce , pole Město příjemce a pole Kraj příjemce v prodejní objednávce. K tomuto problému dochází pouze pokud hodnota Kód země příjemce je již zadána v prodejní objednávce a hodnota se liší od hodnoty Kód země nebo oblasti na novou adresu příjemce.
Řešení
Informace o opravě hotfix
Podporovaná oprava hotfix je nyní k dispozici od společnosti Microsoft. Však je určena pouze k odstranění problému popsaného v tomto článku. Použijte ji pouze u systémů, ve kterých dochází k tomuto konkrétnímu problému. Tato oprava hotfix může být dále testována. Proto pokud jste závažně tento problém, doporučujeme počkat další aktualizaci service pack pro aplikaci Microsoft Dynamics NAV 2013 nebo další verze produktu Microsoft Dynamics NAV, která obsahuje tuto opravu hotfix.
Poznámka: Ve zvláštních případech poplatky, které jsou třeba obvykle zaplatit za telefonní hovory mohou být stornovány, jestliže pracovník technické podpory společnosti Microsoft Dynamics a souvisejících produktů Určuje, že konkrétní aktualizace odstraní váš problém. Výdaje na technickou podporu použije dalších otázek a problémů, které nelze vyřešit konkrétní aktualizací.
Informace o instalaci
Společnost Microsoft poskytuje ukázky programování pouze pro ilustraci bez žádné záruky výslovně uvedené nebo odvozené. To zahrnuje, ale není omezen pouze na předpokládané záruky obchodovatelnosti nebo vhodnosti pro určitý účel. Tento článek předpokládá, že jste obeznámeni s programovacím jazykem, který je předmětem ukázky a s nástroji, které slouží k vytvoření a ladění skriptu. Pracovníci podpory společnosti Microsoft mohou vysvětlit funkce určitého postupu. Nemohou však následující příklady rozšířit o další funkce nebo konstrukce podle konkrétních požadavků.
Poznámka: Před instalací této opravy hotfix ověřte, že všichni uživatelé klienta Microsoft Navision odhlášeni systému. To zahrnuje uživatele klienta Microsoft Navision Application Services (NAS). Je třeba klienta pouze uživatel přihlášený při implementaci opravy hotfix.
Chcete-li implementovat tuto opravu hotfix, musí mít licenci vývojáře.
Doporučujeme, aby uživatelský účet v okně přihlášení systému Windows nebo v okně přihlášení databáze přidělí "SUPER" ID role. Pokud uživatelský účet nelze přiřadit ID role "SUPER", musíte ověřit, že uživatelský účet má následující oprávnění:
-
Změnit oprávnění pro objekt, který budete měnit.
-
Oprávnění ke spuštění pro System Object ID 5210 objekt a System Object ID 9015 objekt.
Poznámka: Nemáte práva k úložištím dat. Pokud nebudete provádět opravu dat.
Změny kódu
Poznámka: Vždy otestujte opravy kódu v kontrolovaném prostředí před instalací opravy v provozních počítačích.
Chcete-li vyřešit tento problém, postupujte takto:
-
Změňte kód do polí v tabulce lokace (14) takto:
Existující kód... ValidateTableRelation=No;
TestTableRelation=No }
{ 5715; ;County ;Text30 }
{ 5718; ;E-Mail ;Text80 ;ExtendedDatatype=E-Mail }
{ 5719; ;Home Page ;Text90 ;ExtendedDatatype=URL }
// Delete the following lines.
{ 5720; ;Country/Region Code ;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Country/Region Code" <> xRec."Country/Region Code") AND ("Country/Region Code" <> '') THEN
Postcode.ClearFields(City,"Post Code",County);
END;
}
// End of the lines.
{ 5724; ;Use As In-Transit ;Boolean ;OnValidate=BEGIN
IF "Use As In-Transit" THEN BEGIN
TESTFIELD("Require Put-away",FALSE);
TESTFIELD("Require Pick",FALSE);
TESTFIELD("Use Cross-Docking",FALSE);
...Změněný kód
... ValidateTableRelation=No;
TestTableRelation=No }
{ 5715; ;County ;Text30 }
{ 5718; ;E-Mail ;Text80 ;ExtendedDatatype=E-Mail }
{ 5719; ;Home Page ;Text90 ;ExtendedDatatype=URL }
// Add the following line.
{ 5720; ;Country/Region Code ;Code10 ;TableRelation=Country/Region }
{ 5724; ;Use As In-Transit ;Boolean ;OnValidate=BEGIN
IF "Use As In-Transit" THEN BEGIN
TESTFIELD("Require Put-away",FALSE);
TESTFIELD("Require Pick",FALSE);
TESTFIELD("Use Cross-Docking",FALSE);
... -
Změňte kód do polí v tabulce odběratelů (18) takto:
Existující kód... { 32 ; ;Place of Export ;Code20 }
{ 33 ; ;Invoice Disc. Code ;Code20 ;TableRelation=Customer;
ValidateTableRelation=No;
TestTableRelation=No }
{ 34 ; ;Customer Disc. Group;Code20 ;TableRelation="Customer Discount Group" }
// Delete the following lines.
{ 35 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Country/Region Code" <> xRec."Country/Region Code") AND (xRec."Country/Region Code" <> '') THEN
PostCode.ClearFields(City,"Post Code",County);
END;
}
// End of the lines.
{ 36 ; ;Collection Method ;Code20 }
{ 37 ; ;Amount ;Decimal ;AutoFormatType=1;
AutoFormatExpr="Currency Code" }
{ 38 ; ;Comment ;Boolean ;FieldClass=FlowField;
CalcFormula=Exist("Comment Line" WHERE (Table Name=CONST(Customer),
...Změněný kód
... { 32 ; ;Place of Export ;Code20 }
{ 33 ; ;Invoice Disc. Code ;Code20 ;TableRelation=Customer;
ValidateTableRelation=No;
TestTableRelation=No }
{ 34 ; ;Customer Disc. Group;Code20 ;TableRelation="Customer Discount Group" }
// Add the following line.
{ 35 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region }
{ 36 ; ;Collection Method ;Code20 }
{ 37 ; ;Amount ;Decimal ;AutoFormatType=1;
AutoFormatExpr="Currency Code" }
{ 38 ; ;Comment ;Boolean ;FieldClass=FlowField;
CalcFormula=Exist("Comment Line" WHERE (Table Name=CONST(Customer),
... -
Změňte kód do polí v tabulce Dodavatel (23) takto:
Existující kód... { 30 ; ;Shipment Method Code;Code10 ;TableRelation="Shipment Method" }
{ 31 ; ;Shipping Agent Code ;Code10 ;TableRelation="Shipping Agent" }
{ 33 ; ;Invoice Disc. Code ;Code20 ;TableRelation=Vendor;
ValidateTableRelation=No;
TestTableRelation=No }
// Delete the following lines.
{ 35 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Country/Region Code" <> xRec."Country/Region Code") AND (xRec."Country/Region Code" <> '') THEN
PostCode.ClearFields(City,"Post Code",County);
END;
}
// End of the lines.
{ 38 ; ;Comment ;Boolean ;FieldClass=FlowField;
CalcFormula=Exist("Comment Line" WHERE (Table Name=CONST(Vendor),
No.=FIELD(No.)));
Editable=No }
{ 39 ; ;Blocked ;Option ;OptionString=[ ,Payment,All] }
...Změněný kód
... { 30 ; ;Shipment Method Code;Code10 ;TableRelation="Shipment Method" }
{ 31 ; ;Shipping Agent Code ;Code10 ;TableRelation="Shipping Agent" }
{ 33 ; ;Invoice Disc. Code ;Code20 ;TableRelation=Vendor;
ValidateTableRelation=No;
TestTableRelation=No }
// Add the following line.
{ 35 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region }
{ 38 ; ;Comment ;Boolean ;FieldClass=FlowField;
CalcFormula=Exist("Comment Line" WHERE (Table Name=CONST(Vendor),
No.=FIELD(No.)));
Editable=No }
{ 39 ; ;Blocked ;Option ;OptionString=[ ,Payment,All] }
... -
Změňte kód do polí v tabulce Prodejní hlavička (36) takto:
Existující kód 1... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 86 ; ;Bill-to County ;Text30 }
// Delete the following lines.
{ 87 ; ;Bill-to Country/Region Code;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Bill-to Country/Region Code" <> xRec."Bill-to Country/Region Code") AND (xRec."Bill-to Country/Region Code" <> '') THEN
PostCode.ClearFields("Bill-to City","Bill-to Post Code","Bill-to County");
END;
}
// End of the lines.
{ 88 ; ;Sell-to Post Code ;Code20 ;TableRelation="Post Code";
OnValidate=BEGIN
PostCode.ValidatePostCode(
"Sell-to City","Sell-to Post Code","Sell-to County","Sell-to Country/Region Code",(CurrFieldNo <> 0) AND GUIALLOWED);
END;
...Změněný kód 1
... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 86 ; ;Bill-to County ;Text30 }
// Add the following line.
{ 87 ; ;Bill-to Country/Region Code;Code10 ;TableRelation=Country/Region }
{ 88 ; ;Sell-to Post Code ;Code20 ;TableRelation="Post Code";
OnValidate=BEGIN
PostCode.ValidatePostCode(
"Sell-to City","Sell-to Post Code","Sell-to County","Sell-to Country/Region Code",(CurrFieldNo <> 0) AND GUIALLOWED);
END;
...Existující kód 2
... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 89 ; ;Sell-to County ;Text30 }
// Delete the following lines.
{ 90 ; ;Sell-to Country/Region Code;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Sell-to Country/Region Code" <> xRec."Sell-to Country/Region Code") AND (xRec."Sell-to Country/Region Code" <> '') THEN
PostCode.ClearFields("Sell-to City","Sell-to Post Code","Sell-to County");
END;
}
// End of the lines.
{ 91 ; ;Ship-to Post Code ;Code20 ;TableRelation="Post Code";
OnValidate=BEGIN
PostCode.ValidatePostCode(
"Ship-to City","Ship-to Post Code","Ship-to County","Ship-to Country/Region Code",(CurrFieldNo <> 0) AND GUIALLOWED);
END;
...Náhradní kód 2
... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 89 ; ;Sell-to County ;Text30 }
// Add the following line.
{ 90 ; ;Sell-to Country/Region Code;Code10 ;TableRelation=Country/Region }
{ 91 ; ;Ship-to Post Code ;Code20 ;TableRelation="Post Code";
OnValidate=BEGIN
PostCode.ValidatePostCode(
"Ship-to City","Ship-to Post Code","Ship-to County","Ship-to Country/Region Code",(CurrFieldNo <> 0) AND GUIALLOWED);
END;
...Existující kód 3
... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 92 ; ;Ship-to County ;Text30 }
// Delete the following lines.
{ 93 ; ;Ship-to Country/Region Code;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Ship-to Country/Region Code" <> xRec."Ship-to Country/Region Code") AND (xRec."Ship-to Country/Region Code" <> '') THEN
PostCode.ClearFields("Ship-to City","Ship-to Post Code","Ship-to County");
END;
}
// End of the lines.
{ 94 ; ;Bal. Account Type ;Option ;OptionString=G/L Account,Bank Account }
{ 97 ; ;Exit Point ;Code10 ;TableRelation="Entry/Exit Point";
OnValidate=BEGIN
UpdateSalesLines(FIELDCAPTION("Exit Point"),FALSE);
END;
...Změněný kód 3
... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 92 ; ;Ship-to County ;Text30 }
// Add the following line.
{ 93 ; ;Ship-to Country/Region Code;Code10 ;TableRelation=Country/Region }
{ 94 ; ;Bal. Account Type ;Option ;OptionString=G/L Account,Bank Account }
{ 97 ; ;Exit Point ;Code10 ;TableRelation="Entry/Exit Point";
OnValidate=BEGIN
UpdateSalesLines(FIELDCAPTION("Exit Point"),FALSE);
END;
... -
Změňte kód do polí v tabulce Nákupní hlavička (38) takto:
Existující kód 1... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 86 ; ;Pay-to County ;Text30 }
// Delete the following lines.
{ 87 ; ;Pay-to Country/Region Code;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Pay-to Country/Region Code" <> xRec."Pay-to Country/Region Code") AND (xRec."Pay-to Country/Region Code" <> '') THEN
PostCode.ClearFields("Pay-to City","Pay-to Post Code","Pay-to County");
END;
}
// End of the lines.
{ 88 ; ;Buy-from Post Code ;Code20 ;TableRelation=IF (Buy-from Country/Region Code=CONST()) "Post Code"
ELSE IF (Buy-from Country/Region Code=FILTER(<>'')) "Post Code" WHERE (Country/Region Code=FIELD(Buy-from Country/Region Code));
OnValidate=BEGIN
PostCode.ValidatePostCode(
"Buy-from City","Buy-from Post Code","Buy-from County","Buy-from Country/Region Code",(CurrFieldNo <> 0) AND GUIALLOWED);
...Změněný kód 1
... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 86 ; ;Pay-to County ;Text30 }
// Add the following line.
{ 87 ; ;Pay-to Country/Region Code;Code10 ;TableRelation=Country/Region }
{ 88 ; ;Buy-from Post Code ;Code20 ;TableRelation=IF (Buy-from Country/Region Code=CONST()) "Post Code"
ELSE IF (Buy-from Country/Region Code=FILTER(<>'')) "Post Code" WHERE (Country/Region Code=FIELD(Buy-from Country/Region Code));
OnValidate=BEGIN
PostCode.ValidatePostCode(
"Buy-from City","Buy-from Post Code","Buy-from County","Buy-from Country/Region Code",(CurrFieldNo <> 0) AND GUIALLOWED);
...Existující kód 2
... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 89 ; ;Buy-from County ;Text30 }
// Delete the following lines.
{ 90 ; ;Buy-from Country/Region Code;Code10;TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Buy-from Country/Region Code" <> xRec."Buy-from Country/Region Code") AND (xRec."Buy-from Country/Region Code" <> '') THEN
PostCode.ClearFields("Buy-from City","Buy-from Post Code","Buy-from County");
END;
}
// End of the lines.
{ 91 ; ;Ship-to Post Code ;Code20 ;TableRelation=IF (Ship-to Country/Region Code=CONST()) "Post Code"
ELSE IF (Ship-to Country/Region Code=FILTER(<>'')) "Post Code" WHERE (Country/Region Code=FIELD(Ship-to Country/Region Code));
OnValidate=BEGIN
PostCode.ValidatePostCode(
"Ship-to City","Ship-to Post Code","Ship-to County","Ship-to Country/Region Code",(CurrFieldNo <> 0) AND GUIALLOWED);
...Náhradní kód 2
... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 89 ; ;Buy-from County ;Text30 }
// Add the following line.
{ 90 ; ;Buy-from Country/Region Code;Code10;TableRelation=Country/Region }
{ 91 ; ;Ship-to Post Code ;Code20 ;TableRelation=IF (Ship-to Country/Region Code=CONST()) "Post Code"
ELSE IF (Ship-to Country/Region Code=FILTER(<>'')) "Post Code" WHERE (Country/Region Code=FIELD(Ship-to Country/Region Code));
OnValidate=BEGIN
PostCode.ValidatePostCode(
"Ship-to City","Ship-to Post Code","Ship-to County","Ship-to Country/Region Code",(CurrFieldNo <> 0) AND GUIALLOWED);
...Existující kód 3
... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 92 ; ;Ship-to County ;Text30 }
// Delete the following lines.
{ 93 ; ;Ship-to Country/Region Code;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Ship-to Country/Region Code" <> xRec."Ship-to Country/Region Code") AND (xRec."Ship-to Country/Region Code" <> '') THEN
PostCode.ClearFields("Ship-to City","Ship-to Post Code","Ship-to County");
END;
}
// End of the lines.
{ 94 ; ;Bal. Account Type ;Option ;OptionString=G/L Account,Bank Account }
{ 95 ; ;Order Address Code ;Code10 ;TableRelation="Order Address".Code WHERE (Vendor No.=FIELD(Buy-from Vendor No.));
OnValidate=BEGIN
IF "Order Address Code" <> '' THEN BEGIN
OrderAddr.GET("Buy-from Vendor No.","Order Address Code");
...Změněný kód 3
... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 92 ; ;Ship-to County ;Text30 }
// Add the following line.
{ 93 ; ;Ship-to Country/Region Code;Code10 ;TableRelation=Country/Region }
{ 94 ; ;Bal. Account Type ;Option ;OptionString=G/L Account,Bank Account }
{ 95 ; ;Order Address Code ;Code10 ;TableRelation="Order Address".Code WHERE (Vendor No.=FIELD(Buy-from Vendor No.));
OnValidate=BEGIN
IF "Order Address Code" <> '' THEN BEGIN
OrderAddr.GET("Buy-from Vendor No.","Order Address Code");
... -
Změňte kód do polí v tabulce informace o společnosti (79) takto:
Existující kód... ValidateTableRelation=No;
TestTableRelation=No }
{ 33 ; ;Ship-to County ;Text30 }
{ 34 ; ;E-Mail ;Text80 ;ExtendedDatatype=E-Mail }
{ 35 ; ;Home Page ;Text80 ;ExtendedDatatype=URL }
// Delete the following lines.
{ 36 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Country/Region Code" <> xRec."Country/Region Code") AND (xRec."Country/Region Code" <> '') THEN
PostCode.ClearFields(City,"Post Code",County);
END;
}
{ 37 ; ;Ship-to Country/Region Code;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Ship-to Country/Region Code" <> xRec."Ship-to Country/Region Code") AND (xRec."Ship-to Country/Region Code" <> '') THEN
PostCode.ClearFields("Ship-to City","Ship-to Post Code","Ship-to County");
END;
}
// End of the lines.
{ 38 ; ;IBAN ;Code50 ;OnValidate=BEGIN
CheckIBAN(IBAN);
END;
}
{ 39 ; ;SWIFT Code ;Code20 }
...Změněný kód
... ValidateTableRelation=No;
TestTableRelation=No }
{ 33 ; ;Ship-to County ;Text30 }
{ 34 ; ;E-Mail ;Text80 ;ExtendedDatatype=E-Mail }
{ 35 ; ;Home Page ;Text80 ;ExtendedDatatype=URL }
// Add the following lines.
{ 36 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region }
{ 37 ; ;Ship-to Country/Region Code;Code10 ;TableRelation=Country/Region }
// End of the lines.
{ 38 ; ;IBAN ;Code50 ;OnValidate=BEGIN
CheckIBAN(IBAN);
END;
}
{ 39 ; ;SWIFT Code ;Code20 }
... -
Změňte kód do polí v tabulce zdrojů (156) takto:
Existující kód... { 55 ; ;Automatic Ext. Texts;Boolean }
{ 56 ; ;No. Series ;Code10 ;TableRelation="No. Series";
Editable=No }
{ 57 ; ;Tax Group Code ;Code10 ;TableRelation="Tax Group" }
{ 58 ; ;VAT Prod. Posting Group;Code10 ;TableRelation="VAT Product Posting Group" }
// Delete the following lines.
{ 59 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Country/Region Code" <> xRec."Country/Region Code") AND (xRec."Country/Region Code" <> '') THEN
PostCode.ClearFields(City,"Post Code",County);
END;
}
// End of the lines.
{ 60 ; ;IC Partner Purch. G/L Acc. No.;Code20;
TableRelation="IC G/L Account" }
{ 900 ; ;Qty. on Assembly Order;Decimal ;FieldClass=FlowField;
CalcFormula=Sum("Assembly Line"."Remaining Quantity (Base)" WHERE (Document Type=CONST(Order),
Type=CONST(Resource),
...Změněný kód
... { 55 ; ;Automatic Ext. Texts;Boolean }
{ 56 ; ;No. Series ;Code10 ;TableRelation="No. Series";
Editable=No }
{ 57 ; ;Tax Group Code ;Code10 ;TableRelation="Tax Group" }
{ 58 ; ;VAT Prod. Posting Group;Code10 ;TableRelation="VAT Product Posting Group" }
// Add the following line.
{ 59 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region }
{ 60 ; ;IC Partner Purch. G/L Acc. No.;Code20;
TableRelation="IC G/L Account" }
{ 900 ; ;Qty. on Assembly Order;Decimal ;FieldClass=FlowField;
CalcFormula=Sum("Assembly Line"."Remaining Quantity (Base)" WHERE (Document Type=CONST(Order),
Type=CONST(Resource),
... -
Změňte kód do polí v tabulce úloha (167) takto:
Existující kód... ValidateTableRelation=No;
TestTableRelation=No }
{ 66 ; ;No. Series ;Code10 ;TableRelation="No. Series";
Editable=No }
{ 67 ; ;Bill-to Country/Region Code;Code10 ;TableRelation=Country/Region;
// Delete the following lines.
OnValidate=BEGIN
IF ("Bill-to Country/Region Code" <> xRec."Bill-to Country/Region Code") AND (xRec."Bill-to Country/Region Code" <> '') THEN
PostCode.ClearFields("Bill-to City","Bill-to Post Code","Bill-to County");
END;
// End of the lines.
Editable=Yes }
{ 68 ; ;Bill-to Name 2 ;Text50 }
{ 117 ; ;Reserve ;Option ;OptionString=Never,Optional,Always }
{ 1000; ;WIP Method ;Code20 ;TableRelation="Job WIP Method".Code WHERE (Valid=CONST(Yes));
OnValidate=VAR
...Změněný kód
... ValidateTableRelation=No;
TestTableRelation=No }
{ 66 ; ;No. Series ;Code10 ;TableRelation="No. Series";
Editable=No }
{ 67 ; ;Bill-to Country/Region Code;Code10 ;TableRelation=Country/Region;
Editable=Yes }
{ 68 ; ;Bill-to Name 2 ;Text50 }
{ 117 ; ;Reserve ;Option ;OptionString=Never,Optional,Always }
{ 1000; ;WIP Method ;Code20 ;TableRelation="Job WIP Method".Code WHERE (Valid=CONST(Yes));
OnValidate=VAR
... -
Změňte kód do polí v tabulce Adresa příjemce (222) takto:
Existující kód... IF "Shipping Agent Code" <> xRec."Shipping Agent Code" THEN
VALIDATE("Shipping Agent Service Code",'');
END;
}
{ 32 ; ;Place of Export ;Code20 }
// Delete the following lines.
{ 35 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Country/Region Code" <> xRec."Country/Region Code") AND (xRec."Country/Region Code" <> '') THEN
PostCode.ClearFields(City,"Post Code",County);
END;
}
// End of the lines.
{ 54 ; ;Last Date Modified ;Date ;Editable=No }
{ 83 ; ;Location Code ;Code10 ;TableRelation=Location WHERE (Use As In-Transit=CONST(No)) }
{ 84 ; ;Fax No. ;Text30 }
{ 85 ; ;Telex Answer Back ;Text20 }
{ 91 ; ;Post Code ;Code20 ;TableRelation=IF (Country/Region Code=CONST()) "Post Code"
...Změněný kód
... IF "Shipping Agent Code" <> xRec."Shipping Agent Code" THEN
VALIDATE("Shipping Agent Service Code",'');
END;
}
{ 32 ; ;Place of Export ;Code20 }
// Add the following line.
{ 35 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region }
{ 54 ; ;Last Date Modified ;Date ;Editable=No }
{ 83 ; ;Location Code ;Code10 ;TableRelation=Location WHERE (Use As In-Transit=CONST(No)) }
{ 84 ; ;Fax No. ;Text30 }
{ 85 ; ;Telex Answer Back ;Text20 }
{ 91 ; ;Post Code ;Code20 ;TableRelation=IF (Country/Region Code=CONST()) "Post Code"
... -
Změňte kód ve funkci ClearFields v tabulce PSČ (225) takto:
Existující kód... CountryCode := PostCodeRec."Country/Region Code";
County := PostCodeRec.County;
END;
END;
// Delete the following lines.
PROCEDURE ClearFields@1(VAR City@1000 : Text[30];VAR PostCode@1001 : Code[20];VAR County@1002 : Text[30]);
BEGIN
City := '';
PostCode := '';
County := '';
END;
// End of the lines.
BEGIN
END.
}
}
...Změněný kód
... CountryCode := PostCodeRec."Country/Region Code";
County := PostCodeRec.County;
END;
END;
BEGIN
END.
}
}
... -
Změňte kód do polí v tabulce Bankovní účet (270) takto:
Existující kód... END;
}
{ 24 ; ;Language Code ;Code10 ;TableRelation=Language }
{ 26 ; ;Statistics Group ;Integer }
{ 29 ; ;Our Contact Code ;Code10 ;TableRelation=Salesperson/Purchaser }
// Delete the following lines.
{ 35 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Country/Region Code" <> xRec."Country/Region Code") AND (xRec."Country/Region Code" <> '') THEN
PostCode.ClearFields(City,"Post Code",County);
END;
}
// End of the lines.
{ 37 ; ;Amount ;Decimal ;AutoFormatType=1;
AutoFormatExpr="Currency Code" }
{ 38 ; ;Comment ;Boolean ;FieldClass=FlowField;
CalcFormula=Exist("Comment Line" WHERE (Table Name=CONST(Bank Account),
No.=FIELD(No.)));
...Změněný kód
... END;
}
{ 24 ; ;Language Code ;Code10 ;TableRelation=Language }
{ 26 ; ;Statistics Group ;Integer }
{ 29 ; ;Our Contact Code ;Code10 ;TableRelation=Salesperson/Purchaser }
// Add the following line.
{ 35 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region }
{ 37 ; ;Amount ;Decimal ;AutoFormatType=1;
AutoFormatExpr="Currency Code" }
{ 38 ; ;Comment ;Boolean ;FieldClass=FlowField;
CalcFormula=Exist("Comment Line" WHERE (Table Name=CONST(Bank Account),
No.=FIELD(No.)));
... -
Změňte kód do polí v tabulce Hlavička upomínky (295) takto:
Existující kód... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 9 ; ;County ;Text30 }
// Delete the following line.
{ 10 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Country/Region Code" <> xRec."Country/Region Code") AND (xRec."Country/Region Code" <> '') THEN
PostCode.ClearFields(City,"Post Code",County);
END;
}
// End of the lines.
{ 11 ; ;Language Code ;Code10 ;TableRelation=Language }
{ 12 ; ;Currency Code ;Code10 ;TableRelation=Currency;
OnValidate=BEGIN
IF CurrFieldNo = FIELDNO("Currency Code") THEN
IF Undo THEN BEGIN
...Změněný kód
... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 9 ; ;County ;Text30 }
// Add the following line.
{ 10 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region }
{ 11 ; ;Language Code ;Code10 ;TableRelation=Language }
{ 12 ; ;Currency Code ;Code10 ;TableRelation=Currency;
OnValidate=BEGIN
IF CurrFieldNo = FIELDNO("Currency Code") THEN
IF Undo THEN BEGIN
... -
Změňte kód do polí v tabulce Hlavička penále (302) takto:
Existující kód... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 9 ; ;County ;Text30 }
// Delete the folloiwng lines.
{ 10 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Country/Region Code" <> xRec."Country/Region Code") AND (xRec."Country/Region Code" <> '')THEN
PostCode.ClearFields(City,"Post Code",County);
END;
}
// End of the lines.
{ 11 ; ;Language Code ;Code10 ;TableRelation=Language }
{ 12 ; ;Currency Code ;Code10 ;TableRelation=Currency;
OnValidate=BEGIN
IF CurrFieldNo = FIELDNO("Currency Code") THEN
IF Undo THEN BEGIN
...Změněný kód
... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 9 ; ;County ;Text30 }
// Add the following line.
{ 10 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region }
{ 11 ; ;Language Code ;Code10 ;TableRelation=Language }
{ 12 ; ;Currency Code ;Code10 ;TableRelation=Currency;
OnValidate=BEGIN
IF CurrFieldNo = FIELDNO("Currency Code") THEN
IF Undo THEN BEGIN
... -
Změňte kód do polí v tabulce Kontakt (5050) takto:
Existující kód... { 10 ; ;Telex No. ;Text20 }
{ 15 ; ;Territory Code ;Code10 ;TableRelation=Territory }
{ 22 ; ;Currency Code ;Code10 ;TableRelation=Currency }
{ 24 ; ;Language Code ;Code10 ;TableRelation=Language }
{ 29 ; ;Salesperson Code ;Code10 ;TableRelation=Salesperson/Purchaser }
// Delete the following lines.
{ 35 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Country/Region Code" <> xRec."Country/Region Code") AND (xRec."Country/Region Code" <> '') THEN
PostCode.ClearFields(City,"Post Code",County);
END;
}
// End of the lines.
{ 38 ; ;Comment ;Boolean ;FieldClass=FlowField;
CalcFormula=Exist("Rlshp. Mgt. Comment Line" WHERE (Table Name=CONST(Contact),
No.=FIELD(No.),
Sub No.=CONST(0)));
Editable=No }
...Změněný kód
... { 10 ; ;Telex No. ;Text20 }
{ 15 ; ;Territory Code ;Code10 ;TableRelation=Territory }
{ 22 ; ;Currency Code ;Code10 ;TableRelation=Currency }
{ 24 ; ;Language Code ;Code10 ;TableRelation=Language }
{ 29 ; ;Salesperson Code ;Code10 ;TableRelation=Salesperson/Purchaser }
// Add the following line.
{ 35 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region }
{ 38 ; ;Comment ;Boolean ;FieldClass=FlowField;
CalcFormula=Exist("Rlshp. Mgt. Comment Line" WHERE (Table Name=CONST(Contact),
No.=FIELD(No.),
Sub No.=CONST(0)));
Editable=No }
... -
Změňte kód do polí v tabulce Alternativní adresa kontaktu (5051) takto:
Existující kód... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 9 ; ;County ;Text30 }
// Delete the following lines.
{ 10 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Country/Region Code" <> xRec."Country/Region Code") AND (xRec."Country/Region Code" <> '') THEN
PostCode.ClearFields(City,"Post Code",County);
END;
}
// End of the lines.
{ 12 ; ;Phone No. ;Text30 ;ExtendedDatatype=Phone No. }
{ 13 ; ;Telex No. ;Text20 }
{ 14 ; ;Extension No. ;Text30 }
{ 15 ; ;Mobile Phone No. ;Text30 ;ExtendedDatatype=Phone No. }
{ 16 ; ;Pager ;Text30 }
...Změněný kód
... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 9 ; ;County ;Text30 }
// Add the following line.
{ 10 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region }
{ 12 ; ;Phone No. ;Text30 ;ExtendedDatatype=Phone No. }
{ 13 ; ;Telex No. ;Text20 }
{ 14 ; ;Extension No. ;Text30 }
{ 15 ; ;Mobile Phone No. ;Text30 ;ExtendedDatatype=Phone No. }
{ 16 ; ;Pager ;Text30 }
... -
Změňte kód do polí v tabulce Zaměstnanci (5200) takto:
Existující kód... { 20 ; ;Birth Date ;Date }
{ 21 ; ;Social Security No. ;Text30 }
{ 22 ; ;Union Code ;Code10 ;TableRelation=Union }
{ 23 ; ;Union Membership No.;Text30 }
{ 24 ; ;Gender ;Option ;OptionString=[ ,Female,Male] }
// Delete the following lines.
{ 25 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Country/Region Code" <> xRec."Country/Region Code") AND (xRec."Country/Region Code" <> '') THEN
PostCode.ClearFields(City,"Post Code",County);
END;
}
// End of the lines.
{ 26 ; ;Manager No. ;Code20 ;TableRelation=Employee }
{ 27 ; ;Emplymt. Contract Code;Code10 ;TableRelation="Employment Contract" }
{ 28 ; ;Statistics Group Code;Code10 ;TableRelation="Employee Statistics Group" }
{ 29 ; ;Employment Date ;Date }
{ 31 ; ;Status ;Option ;OnValidate=BEGIN
...Změněný kód
... { 20 ; ;Birth Date ;Date }
{ 21 ; ;Social Security No. ;Text30 }
{ 22 ; ;Union Code ;Code10 ;TableRelation=Union }
{ 23 ; ;Union Membership No.;Text30 }
{ 24 ; ;Gender ;Option ;OptionString=[ ,Female,Male] }
// Add the following line.
{ 25 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region }
{ 26 ; ;Manager No. ;Code20 ;TableRelation=Employee }
{ 27 ; ;Emplymt. Contract Code;Code10 ;TableRelation="Employment Contract" }
{ 28 ; ;Statistics Group Code;Code10 ;TableRelation="Employee Statistics Group" }
{ 29 ; ;Employment Date ;Date }
{ 31 ; ;Status ;Option ;OnValidate=BEGIN
... -
Změňte kód do polí v tabulce Alternativní adresa (5201) takto:
Existující kód... { 13 ; ;Comment ;Boolean ;FieldClass=FlowField;
CalcFormula=Exist("Human Resource Comment Line" WHERE (Table Name=CONST(Alternative Address),
No.=FIELD(Employee No.),
Alternative Address Code=FIELD(Code)));
Editable=No }
// Delete the following lines.
{ 14 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Country/Region Code" <> xRec."Country/Region Code") AND (xRec."Country/Region Code" <> '') THEN
PostCode.ClearFields(City,"Post Code",County);
END;
}
// End of the lines.
}
KEYS
{
{ ;Employee No.,Code ;Clustered=Yes }
}
...Změněný kód
... { 13 ; ;Comment ;Boolean ;FieldClass=FlowField;
CalcFormula=Exist("Human Resource Comment Line" WHERE (Table Name=CONST(Alternative Address),
No.=FIELD(Employee No.),
Alternative Address Code=FIELD(Code)));
Editable=No }
// Add the following line.
{ 14 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region }
}
KEYS
{
{ ;Employee No.,Code ;Clustered=Yes }
}
... -
Změňte kód do polí v tabulce svazů (5209) takto:
Existující kód... { 9 ; ;Address 2 ;Text50 }
{ 10 ; ;County ;Text30 }
{ 11 ; ;Fax No. ;Text30 }
{ 12 ; ;E-Mail ;Text80 ;ExtendedDatatype=E-Mail }
{ 13 ; ;Home Page ;Text80 ;ExtendedDatatype=URL }
// Delete the following lines.
{ 14 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Country/Region Code" <> xRec."Country/Region Code") AND (xRec."Country/Region Code" <> '') THEN
PostCode.ClearFields(City,"Post Code",County);
END;
}
// End of the lines.
}
KEYS
{
{ ;Code ;Clustered=Yes }
}
...Změněný kód
... { 9 ; ;Address 2 ;Text50 }
{ 10 ; ;County ;Text30 }
{ 11 ; ;Fax No. ;Text30 }
{ 12 ; ;E-Mail ;Text80 ;ExtendedDatatype=E-Mail }
{ 13 ; ;Home Page ;Text80 ;ExtendedDatatype=URL }
// Add the following line.
{ 14 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region }
}
KEYS
{
{ ;Code ;Clustered=Yes }
}
... -
Změňte kód do polí v tabulce odpovědné centrum (5714) takto:
Existující kód... PostCode.ValidatePostCode(City,"Post Code",County,"Country/Region Code",(CurrFieldNo <> 0) AND GUIALLOWED);
END;
ValidateTableRelation=No;
TestTableRelation=No }
// Delete the folloiwng lines.
{ 7 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Country/Region Code" <> xRec."Country/Region Code") AND (xRec."Country/Region Code" <> '') THEN
PostCode.ClearFields(City,"Post Code",County);
END;
}
// End of the lines.
{ 8 ; ;Phone No. ;Text30 ;ExtendedDatatype=Phone No. }
{ 9 ; ;Fax No. ;Text30 }
{ 10 ; ;Name 2 ;Text50 }
{ 11 ; ;Contact ;Text50 }
{ 12 ; ;Global Dimension 1 Code;Code20 ;TableRelation="Dimension Value".Code WHERE (Global Dimension No.=CONST(1));
...Změněný kód
... PostCode.ValidatePostCode(City,"Post Code",County,"Country/Region Code",(CurrFieldNo <> 0) AND GUIALLOWED);
END;
ValidateTableRelation=No;
TestTableRelation=No }
// Add the following line.
{ 7 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region }
{ 8 ; ;Phone No. ;Text30 ;ExtendedDatatype=Phone No. }
{ 9 ; ;Fax No. ;Text30 }
{ 10 ; ;Name 2 ;Text50 }
{ 11 ; ;Contact ;Text50 }
{ 12 ; ;Global Dimension 1 Code;Code20 ;TableRelation="Dimension Value".Code WHERE (Global Dimension No.=CONST(1));
... -
Změňte kód do polí v tabulce Hlavička transferu (5740) takto:
Existující kód 1... ValidateTableRelation=No;
TestTableRelation=No }
{ 9 ; ;Transfer-from County;Text30 }
{ 10 ; ;Trsf.-from Country/Region Code;Code10;
// Delete the following lines.
TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Trsf.-from Country/Region Code" <> xRec."Trsf.-from Country/Region Code") AND
(xRec."Trsf.-from Country/Region Code" <> '')
THEN
PostCode.ClearFields("Transfer-from City","Transfer-from Post Code","Transfer-from County");
END;
}
// End of the lines.
{ 11 ; ;Transfer-to Code ;Code10 ;TableRelation=Location WHERE (Use As In-Transit=CONST(No));
OnValidate=VAR
Location@1000 : Record 14;
Confirmed@1001 : Boolean;
BEGIN
...Změněný kód 1
... ValidateTableRelation=No;
TestTableRelation=No }
{ 9 ; ;Transfer-from County;Text30 }
{ 10 ; ;Trsf.-from Country/Region Code;Code10;
// Add the folloiwng line.
TableRelation=Country/Region }
{ 11 ; ;Transfer-to Code ;Code10 ;TableRelation=Location WHERE (Use As In-Transit=CONST(No));
OnValidate=VAR
Location@1000 : Record 14;
Confirmed@1001 : Boolean;
BEGIN
...Existující kód 2
... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 18 ; ;Transfer-to County ;Text30 }
// Delete the following lines.
{ 19 ; ;Trsf.-to Country/Region Code;Code10;TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Trsf.-to Country/Region Code" <> xRec."Trsf.-to Country/Region Code") AND (xRec."Trsf.-to Country/Region Code" <> '') THEN
PostCode.ClearFields("Transfer-to City","Transfer-to Post Code","Transfer-to County");
END;
}
// End of the lines.
{ 20 ; ;Posting Date ;Date }
{ 21 ; ;Shipment Date ;Date ;OnValidate=BEGIN
TestStatusOpen;
TransferRoute.CalcReceiptDate(
"Shipment Date",
...Náhradní kód 2
... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 18 ; ;Transfer-to County ;Text30 }
// Add the following line.
{ 19 ; ;Trsf.-to Country/Region Code;Code10;TableRelation=Country/Region }
{ 20 ; ;Posting Date ;Date }
{ 21 ; ;Shipment Date ;Date ;OnValidate=BEGIN
TestStatusOpen;
TransferRoute.CalcReceiptDate(
"Shipment Date",
... -
Změňte kód do polí v tabulce Hlavička servisu (5900) takto:
Existující kód 1... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 86 ; ;Bill-to County ;Text30 }
// Delete the following lines.
{ 87 ; ;Bill-to Country/Region Code;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Bill-to Country/Region Code" <> xRec."Bill-to Country/Region Code") AND (xRec."Bill-to Country/Region Code" <> '') THEN
PostCode.ClearFields("Bill-to City","Bill-to Post Code","Bill-to County");
END;
}
// End of the lines.
{ 88 ; ;Post Code ;Code20 ;TableRelation=IF (Country/Region Code=CONST()) "Post Code"
ELSE IF (Country/Region Code=FILTER(<>'')) "Post Code" WHERE (Country/Region Code=FIELD(Country/Region Code));
OnValidate=BEGIN
PostCode.ValidatePostCode(City,"Post Code",County,"Country/Region Code",(CurrFieldNo <> 0) AND GUIALLOWED);
END;
...Změněný kód 1
... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 86 ; ;Bill-to County ;Text30 }
// Add the following line.
{ 87 ; ;Bill-to Country/Region Code;Code10 ;TableRelation=Country/Region }
{ 88 ; ;Post Code ;Code20 ;TableRelation=IF (Country/Region Code=CONST()) "Post Code"
ELSE IF (Country/Region Code=FILTER(<>'')) "Post Code" WHERE (Country/Region Code=FIELD(Country/Region Code));
OnValidate=BEGIN
PostCode.ValidatePostCode(City,"Post Code",County,"Country/Region Code",(CurrFieldNo <> 0) AND GUIALLOWED);
END;
...Existující kód 2
... TestTableRelation=No }
{ 89 ; ;County ;Text30 }
{ 90 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
VALIDATE("Ship-to Country/Region Code");
// Delete the following lines.
IF ("Country/Region Code" <> xRec."Country/Region Code") AND (xRec."Country/Region Code" <> '') THEN
PostCode.ClearFields(City,"Post Code",County);
// End of the lines.
END;
}
{ 91 ; ;Ship-to Post Code ;Code20 ;TableRelation=IF (Ship-to Country/Region Code=CONST()) "Post Code"
ELSE IF (Ship-to Country/Region Code=FILTER(<>'')) "Post Code" WHERE (Country/Region Code=FIELD(Ship-to Country/Region Code));
OnValidate=BEGIN
...Náhradní kód 2
... TestTableRelation=No }
{ 89 ; ;County ;Text30 }
{ 90 ; ;Country/Region Code ;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
VALIDATE("Ship-to Country/Region Code");
END;
}
{ 91 ; ;Ship-to Post Code ;Code20 ;TableRelation=IF (Ship-to Country/Region Code=CONST()) "Post Code"
ELSE IF (Ship-to Country/Region Code=FILTER(<>'')) "Post Code" WHERE (Country/Region Code=FIELD(Ship-to Country/Region Code));
OnValidate=BEGIN
...Existující kód 3
... ValidateTableRelation=No;
TestTableRelation=No }
{ 92 ; ;Ship-to County ;Text30 }
{ 93 ; ;Ship-to Country/Region Code;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
// Delete the following lines.
IF ("Ship-to Country/Region Code" <> xRec."Ship-to Country/Region Code") AND (xRec."Ship-to Country/Region Code" <> '') THEN
PostCode.ClearFields("Ship-to City","Ship-to Post Code","Ship-to County");
// End of the lines.
IF "Ship-to Country/Region Code" <> '' THEN
"VAT Country/Region Code" := "Ship-to Country/Region Code"
ELSE
"VAT Country/Region Code" := "Country/Region Code"
END;
...Změněný kód 3
... ValidateTableRelation=No;
TestTableRelation=No }
{ 92 ; ;Ship-to County ;Text30 }
{ 93 ; ;Ship-to Country/Region Code;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
IF "Ship-to Country/Region Code" <> '' THEN
"VAT Country/Region Code" := "Ship-to Country/Region Code"
ELSE
"VAT Country/Region Code" := "Country/Region Code"
END;
... -
Změňte kód do polí v tabulkách Hlavička dodávky vratky (6650) takto:
Existující kód 1... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 86 ; ;Pay-to County ;Text30 }
// Delete the following lines.
{ 87 ; ;Pay-to Country/Region Code;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Pay-to Country/Region Code" <> xRec."Pay-to Country/Region Code") AND (xRec."Pay-to Country/Region Code" <> '') THEN
PostCode.ClearFields("Pay-to City","Pay-to Post Code","Pay-to County");
END;
}
// End of the lines.
{ 88 ; ;Buy-from Post Code ;Code20 ;TableRelation=IF (Buy-from Country/Region Code=CONST()) "Post Code"
ELSE IF (Buy-from Country/Region Code=FILTER(<>'')) "Post Code" WHERE (Country/Region Code=FIELD(Buy-from Country/Region Code));
OnValidate=BEGIN
PostCode.ValidatePostCode(
"Buy-from City","Buy-from Post Code","Buy-from County","Buy-from Country/Region Code",(CurrFieldNo <> 0) AND GUIALLOWED);
...Změněný kód 1
... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 86 ; ;Pay-to County ;Text30 }
// Add the following line.
{ 87 ; ;Pay-to Country/Region Code;Code10 ;TableRelation=Country/Region }
{ 88 ; ;Buy-from Post Code ;Code20 ;TableRelation=IF (Buy-from Country/Region Code=CONST()) "Post Code"
ELSE IF (Buy-from Country/Region Code=FILTER(<>'')) "Post Code" WHERE (Country/Region Code=FIELD(Buy-from Country/Region Code));
OnValidate=BEGIN
PostCode.ValidatePostCode(
"Buy-from City","Buy-from Post Code","Buy-from County","Buy-from Country/Region Code",(CurrFieldNo <> 0) AND GUIALLOWED);
...Existující kód 2
... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 89 ; ;Buy-from County ;Text30 }
// Delete the following lines.
{ 90 ; ;Buy-from Country/Region Code;Code10;TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Buy-from Country/Region Code" <> xRec."Buy-from Country/Region Code") AND (xRec."Buy-from Country/Region Code" <> '') THEN
PostCode.ClearFields("Buy-from City","Buy-from Post Code","Buy-from County");
END;
}
// End of the lines.
{ 91 ; ;Ship-to Post Code ;Code20 ;TableRelation=IF (Ship-to Country/Region Code=CONST()) "Post Code"
ELSE IF (Ship-to Country/Region Code=FILTER(<>'')) "Post Code" WHERE (Country/Region Code=FIELD(Ship-to Country/Region Code));
OnValidate=BEGIN
PostCode.ValidatePostCode(
"Ship-to City","Ship-to Post Code","Ship-to County","Ship-to Country/Region Code",(CurrFieldNo <> 0) AND GUIALLOWED);
...Náhradní kód 2
... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 89 ; ;Buy-from County ;Text30 }
// Add the following line.
{ 90 ; ;Buy-from Country/Region Code;Code10;TableRelation=Country/Region }
{ 91 ; ;Ship-to Post Code ;Code20 ;TableRelation=IF (Ship-to Country/Region Code=CONST()) "Post Code"
ELSE IF (Ship-to Country/Region Code=FILTER(<>'')) "Post Code" WHERE (Country/Region Code=FIELD(Ship-to Country/Region Code));
OnValidate=BEGIN
PostCode.ValidatePostCode(
"Ship-to City","Ship-to Post Code","Ship-to County","Ship-to Country/Region Code",(CurrFieldNo <> 0) AND GUIALLOWED);
...Existující kód 3
... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 92 ; ;Ship-to County ;Text30 }
// Delete the following lines.
{ 93 ; ;Ship-to Country/Region Code;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Ship-to Country/Region Code" <> xRec."Ship-to Country/Region Code") AND (xRec."Ship-to Country/Region Code" <> '') THEN
PostCode.ClearFields("Ship-to City","Ship-to Post Code","Ship-to County");
END;
}
// End of the lines.
{ 94 ; ;Bal. Account Type ;Option ;OptionString=G/L Account,Bank Account }
{ 95 ; ;Order Address Code ;Code10 ;TableRelation="Order Address".Code WHERE (Vendor No.=FIELD(Buy-from Vendor No.)) }
{ 97 ; ;Entry Point ;Code10 ;TableRelation="Entry/Exit Point" }
{ 98 ; ;Correction ;Boolean }
{ 99 ; ;Document Date ;Date }
...Změněný kód 3
... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 92 ; ;Ship-to County ;Text30 }
// Add the following line.
{ 93 ; ;Ship-to Country/Region Code;Code10 ;TableRelation=Country/Region }
{ 94 ; ;Bal. Account Type ;Option ;OptionString=G/L Account,Bank Account }
{ 95 ; ;Order Address Code ;Code10 ;TableRelation="Order Address".Code WHERE (Vendor No.=FIELD(Buy-from Vendor No.)) }
{ 97 ; ;Entry Point ;Code10 ;TableRelation="Entry/Exit Point" }
{ 98 ; ;Correction ;Boolean }
{ 99 ; ;Document Date ;Date }
... -
Změňte kód do polí v tabulkách Hlavička příjmu vratky (6660) takto:
Existující kód 1... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 86 ; ;Bill-to County ;Text30 }
// Delete the following lines.
{ 87 ; ;Bill-to Country/Region Code;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Bill-to Country/Region Code" <> xRec."Bill-to Country/Region Code") AND (xRec."Bill-to Country/Region Code" <> '') THEN
PostCode.ClearFields("Bill-to City","Bill-to Post Code","Bill-to County");
END;
}
// End of the lines.
{ 88 ; ;Sell-to Post Code ;Code20 ;TableRelation=IF (Sell-to Country/Region Code=CONST()) "Post Code"
ELSE IF (Sell-to Country/Region Code=FILTER(<>'')) "Post Code" WHERE (Country/Region Code=FIELD(Sell-to Country/Region Code));
OnValidate=BEGIN
PostCode.ValidatePostCode(
"Sell-to City","Sell-to Post Code","Sell-to County","Sell-to Country/Region Code",(CurrFieldNo <> 0) AND GUIALLOWED);
...Změněný kód 1
... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 86 ; ;Bill-to County ;Text30 }
// Add the following line.
{ 87 ; ;Bill-to Country/Region Code;Code10 ;TableRelation=Country/Region }
{ 88 ; ;Sell-to Post Code ;Code20 ;TableRelation=IF (Sell-to Country/Region Code=CONST()) "Post Code"
ELSE IF (Sell-to Country/Region Code=FILTER(<>'')) "Post Code" WHERE (Country/Region Code=FIELD(Sell-to Country/Region Code));
OnValidate=BEGIN
PostCode.ValidatePostCode(
"Sell-to City","Sell-to Post Code","Sell-to County","Sell-to Country/Region Code",(CurrFieldNo <> 0) AND GUIALLOWED);
...Existující kód 2
... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 89 ; ;Sell-to County ;Text30 }
// Delete the following lines.
{ 90 ; ;Sell-to Country/Region Code;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Sell-to Country/Region Code" <> xRec."Sell-to Country/Region Code") AND (xRec."Sell-to Country/Region Code" <> '') THEN
PostCode.ClearFields("Sell-to City","Sell-to Post Code","Sell-to County");
END;
}
// End of the lines.
{ 91 ; ;Ship-to Post Code ;Code20 ;TableRelation=IF (Ship-to Country/Region Code=CONST()) "Post Code"
ELSE IF (Ship-to Country/Region Code=FILTER(<>'')) "Post Code" WHERE (Country/Region Code=FIELD(Ship-to Country/Region Code));
OnValidate=BEGIN
PostCode.ValidatePostCode(
"Ship-to City","Ship-to Post Code","Ship-to County","Ship-to Country/Region Code",(CurrFieldNo <> 0) AND GUIALLOWED);
...Náhradní kód 2
... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 89 ; ;Sell-to County ;Text30 }
// Add the following line.
{ 90 ; ;Sell-to Country/Region Code;Code10 ;TableRelation=Country/Region }
{ 91 ; ;Ship-to Post Code ;Code20 ;TableRelation=IF (Ship-to Country/Region Code=CONST()) "Post Code"
ELSE IF (Ship-to Country/Region Code=FILTER(<>'')) "Post Code" WHERE (Country/Region Code=FIELD(Ship-to Country/Region Code));
OnValidate=BEGIN
PostCode.ValidatePostCode(
"Ship-to City","Ship-to Post Code","Ship-to County","Ship-to Country/Region Code",(CurrFieldNo <> 0) AND GUIALLOWED);
...Existující kód 3
... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 92 ; ;Ship-to County ;Text30 }
// Delete the following lines.
{ 93 ; ;Ship-to Country/Region Code;Code10 ;TableRelation=Country/Region;
OnValidate=BEGIN
IF ("Ship-to Country/Region Code" <> xRec."Ship-to Country/Region Code") AND (xRec."Ship-to Country/Region Code" <> '') THEN
PostCode.ClearFields("Ship-to City","Ship-to Post Code","Ship-to County");
END;
}
// End of the lines.
{ 94 ; ;Bal. Account Type ;Option ;OptionString=G/L Account,Bank Account }
{ 97 ; ;Exit Point ;Code10 ;TableRelation="Entry/Exit Point" }
{ 98 ; ;Correction ;Boolean }
{ 99 ; ;Document Date ;Date }
{ 100 ; ;External Document No.;Code35 }
...Změněný kód 3
... END;
ValidateTableRelation=No;
TestTableRelation=No }
{ 92 ; ;Ship-to County ;Text30 }
// Add the following line.
{ 93 ; ;Ship-to Country/Region Code;Code10 ;TableRelation=Country/Region }
{ 94 ; ;Bal. Account Type ;Option ;OptionString=G/L Account,Bank Account }
{ 97 ; ;Exit Point ;Code10 ;TableRelation="Entry/Exit Point" }
{ 98 ; ;Correction ;Boolean }
{ 99 ; ;Document Date ;Date }
{ 100 ; ;External Document No.;Code35 }
...
Předpoklady
Microsoft Dynamics NAV 2013 nainstalovat tuto opravu hotfix, musí mít.
Informace o odinstalaci
Tato oprava hotfix nelze odebrat.
Stav
Společnost Microsoft potvrdila, že se jedná o problém v produktech společnosti Microsoft, které jsou uvedeny v části "Platí pro".
Poznámka: Toto je článek "Rychlé publikování" vytvářen přímo v rámci odborné pomoci společnosti Microsoft. Informace obsažené v tomto dokumentu jsou poskytovány tak, jak je v reakci na vznikající problémy. V důsledku rychlosti v jeho zpřístupnění materiály, mohou obsahovat typografické chyby a mohou být upraveny kdykoli bez předchozího upozornění. Viz Podmínky použití pro další aspekty.
