The Windows Malicious Software Removal Tool (MSRT) is intended for use with the operating systems that are listed in the "Applies to" section. Operating systems that are not included in the list were not tested and, therefore, are not supported. These unsupported operating systems include all versions and editions of embedded operating systems.
Introduction
Microsoft generally releases the MSRT on a monthly cadence as part of Windows Update or as a standalone tool. (For exceptions, see Skipped releases.) Use this tool to find and remove specific prevalent threats and reverse the changes that they made (see the "Covered malware families" list in the "Release information" section of KB 890830). For comprehensive malware detection and removal, consider using Windows Defender Offline or Microsoft Safety Scanner.
This tool works in a complementary manner with existing antimalware solutions and can be used on most current Windows versions.
The information that's contained in this article is specific to the enterprise deployment of the tool. We recommend that you review the following Knowledge Base article for more information about the tool:
890830 Remove specific prevalent malware with Windows Malicious Software Removal Tool
Download the tool
You can manually download the MSRT from the Microsoft Download Center. The following files are available for download:
For 32-bit x86-based systems:
For 64-bit x64-based systems:
Deployment overview
The tool can be deployed in an enterprise environment to enhance existing protection and as part of a defense-in-depth strategy. To deploy the tool in an enterprise environment, you can use one or more of the following methods:
-
Windows Server Update Services
-
Microsoft Systems Management Software (SMS) software package
-
Group Policy-based computer startup script
-
Group Policy-based user logon script
The current version of this tool does not support the following deployment technologies and techniques:
-
Windows Update Catalog
-
Execution of the tool against a remote computer
-
Software Update Services (SUS)
Additionally, the Microsoft Baseline Security Analyzer (MBSA) does not detect execution of the tool. This article includes information about how you can verify execution of the tool as part of deployment.
Code sample
The script and the steps that are provided here are meant to be only samples and examples. Customers must test these sample scripts and example scenarios and modify them appropriately to work in their environment. You must change the ServerName and the ShareName according to the setup in your environment.
The following code sample does the following things:-
Runs the tool in silent mode
-
Copies the log file to a preconfigured network share
-
Prefixes the log the file name by using the name of the computer from which the tool is run and the user name of the current userInitial setup and configuration section.
Note You must set appropriate permissions on the share according to the instructions in the
REM In this example, the script is named RunMRT.cmd.
REM The Sleep.exe utility is used to delay the execution of the tool when used as a
REM startup script. See the "Known issues" section for details.
@echo off
call \\ServerName\ShareName\Sleep.exe 5
Start /wait \\ServerName\ShareName\Windows-KB890830-V5.127.exe /q
copy %windir%\debug\mrt.log \\ServerName\ShareName\Logs\%computername%_%username%_mrt.log
Note In this code sample, ServerName is a placeholder for the name of your server, and ShareName is a placeholder for the name of your share.
Initial setup and configuration
This section is intended for administrators who are using a startup script or a logon script to deploy this tool. If you are using SMS, you can continue to the "Deployment methods" section.
To configure the server and the share, follow these steps:-
Set up a share on a member server. Then name the share
ShareName. -
Copy the tool and the sample script, RunMRT.cmd, to the share. See the Code sample section for details.
-
Configure the following share permissions and NTFS file system permissions:
-
Share permissions:
-
Add the domain user account for the user who is managing this share, and then select Full Control.
-
Remove the Everyone group.
-
If you use the computer startup script method, add the Domain Computers group together with Change and Read permissions.
-
If you use the logon script method, add the Authenticated Users group together with Change and Read permissions.
-
-
NTFS permissions:
-
Add the domain user account for the user who is managing this share, and then select Full Control.
-
Remove the Everyone group if it is in the list.
Note If you receive an error message when you remove the Everyone group, select Advanced on the Security tab, and then select to clear the Allow inheritable permissions from parent to propagate to this object check box. -
If you use the computer startup script method, grant the Domain Computers group Read & Execute permissions, List Folder Contents permissions, and Read permissions.
-
If you use the logon script method, grant the Authenticated Users group Read & Execute permissions, List Folder Contents permissions, and Read permissions.
-
-
-
Under the ShareName folder, create a folder that is named "Logs."
This folder is where the final log files will be collected after the tool runs on the client computers. -
To configure the NTFS permissions on the Logs folder, follow these steps.
Note Do not change the Share permissions in this step.-
Add the domain user account for the user who is managing this share, and then select Full Control.
-
If you use the computer startup script method, give the Domain Computers group Modify permissions, "Read & Execute" permissions, List Folder Contents permissions, Read permissions, and Write permissions.
-
If you use the logon script method, give the Authenticated Users group Modify permissions, "Read & Execute" permissions, List Folder Contents permissions, Read permissions, and Write permissions.
-
Deployment methods
Note To run this tool, you must have Administrator permissions or System permissions, regardless of the deployment option that you choose.
How to use the SMS software package
The following example provides step-by-step instructions for using SMS 2003. The steps for using SMS 2.0 resemble these steps.
-
Extract the Mrt.exe file from the package that is named Windows-KB890830-V5.127.exe /x.
-
Create a .bat file to start Mrt.exe and to capture the return code by using ISMIF32.exe.
The following is an example.@echo off Start /wait Mrt.exe /q If errorlevel 13 goto error13 If errorlevel 12 goto error12 Goto end :error13 Ismif32.exe –f MIFFILE –p MIFNAME –d ”text about error 13” Goto end :error12 Ismif32.exe –f MIFFILE –p MIFNAME –d “text about error 12” Goto end :end
For more information about Ismif32.exe, go to the following article in the Microsoft Knowledge Base:
186415 Status MIF creator, Ismif32.exe is available
-
To create a package in the SMS 2003 console, follow these steps:
-
Open the SMS Administrator Console.
-
Right-select the Packages node, select New, and then select Package.
The Package Properties dialog box is displayed. -
On the General tab, name the package.
-
On the Data Source tab, select to select the This package contains source files check box.
-
Select Set, and then choose a source directory that contains the tool.
-
On the Distribution Settings tab, set the Sending priority to High.
-
On the Reporting tab, select Use these fields for status MIF matching, and then specify a name for the MIF file name field and for the
Name field. Version and Publisher are optional. -
Select OK to create the package.
-
-
To specify a Distribution Point (DP) to the package, follow these steps:
-
In the SMS 2003 console, locate the new package under the Packages node.
-
Expand the package. Right-select Distribution Points, point to New, and then select Distribution Points.
-
Start the New Distribution Points Wizard. Select an existing Distribution Point.
-
Select Finish to exit the wizard.
-
-
To add the batch file that was previously created to the new package, follow these steps:
-
Under the new package node, select the Programs node.
-
Right-select Programs, point to New, and then select Program.
-
Select the General tab, and then enter a valid name.
-
At the Command line, select Browse to select the batch file that you created to start Mrt.exe.
-
Change Run to Hidden. Change After to No action required.
-
Select the Requirements tab, and then select This program can run only on specified client operating systems.
-
Select All x86 Windows XP.
-
Select the Environment tab, select Whether a user is logged in the Program can run list. Set the Run mode to Run with administrative rights.
-
Select OK to close the dialog box.
-
-
To create an advertisement to advertise the program to clients, follow these steps:
-
Right-select the Advertisement node, select New, and then select Advertisement.
-
On the General tab, enter a name for the advertisement. In the Package field, select the package that you previously created. In the Program field, select the program that you previously created. Select Browse, and then select the All System collection or select a collection of computers that only includes Windows Vista and later versions.
-
On the Schedule tab, leave the default options if you want the program to only run one time. To run the program on a schedule, assign a schedule interval.
-
Set the Priority to High.
-
Select OK to create the advertisement.
-
How to use a Group Policy-based computer startup script
This method requires you to restart the client computer after you set up the script and after you apply the Group Policy setting.
-
Set up the shares. To do this, follow the steps in the Initial setup and configuration section.
-
Set up the startup script. To do this, follow these steps:
-
In the Active Directory Users and Computers MMC snap-in, right-select the domain name, and then select Properties.
-
Select the Group Policy tab.
-
Select New to create a new Group Policy Object (GPO), and type MRT Deployment for the name of the policy.
-
Select the new policy, and then select Edit.
-
Expand Windows Settings for Computer Configuration, and then select Scripts.
-
Double-select Logon, and then select Add.
The Add a Script dialog box is displayed. -
In the Script Name box, type \\ServerName\ShareName\RunMRT.cmd.
-
Select OK, and then select Apply.
-
-
Restart the client computers that are members of this domain.
How to use a Group Policy-based user logon script
This method requires that the logon user account is a domain account and is a member of the local administrator's group on the client computer.
-
Set up the shares. To do this, follow the steps in theInitial setup and configuration section.
-
Set up the logon script. To do this, follow these steps:
-
In the Active Directory Users and Computers MMC snap-in, right-select the domain name, and then select Properties.
-
Select the Group Policy tab.
-
Select New to create a new GPO, and then type MRT Deployment for the name.
-
Select the new policy, and then select Edit.
-
Expand Windows Settings for User Configuration, and then select Scripts.
-
Double-select Logon, and then select Add. The Add a Script dialog box is displayed.
-
In the Script Name box, type \\ServerName\ShareName\RunMRT.cmd.
-
Select OK, and then select Apply.
-
-
Log off and then log on to the client computers.
In this scenario, the script and the tool will run under the context of the logged-on user. If this user does not belong to the local administrators group or does not have sufficient permissions, the tool will not run and will not return the appropriate return code. For more information about how to use startup scripts and logon scripts, go to the following article in the Microsoft Knowledge Base:
198642 Overview of logon, logoff, startup, and shutdown scripts in Windows 2000
Additional information that is relevant to enterprise deployment
How to examine return codes
You can examine the return code of the tool in your deployment logon script or in your deployment startup script to verify the results of execution. See the Code sample section for an example of how to do this. The following list contains the valid return codes.
0 |
= |
No infection found |
1 |
= |
OS Environment Error |
2 |
= |
Not running as an Administrator |
3 |
= |
Not a supported OS |
4 |
= |
Error Initializing the scanner. (Download a new copy of the tool) |
5 |
= |
Not used |
6 |
= |
At least one infection detected. No errors. |
7 |
= |
At least one infection was detected, but errors were encountered. |
8 |
= |
At least one infection was detected and removed, but manual steps are required for a complete removal. |
9 |
= |
At least one infection was detected and removed, but manual steps are required for complete removal and errors were encountered. |
10 |
= |
At least one infection was detected and removed, but a restart is required for complete removal |
11 |
= |
At least one infection was detected and removed, but a restart is required for complete removal and errors were encountered |
12 |
= |
At least one infection was detected and removed, but both manual steps and a restart is required for complete removal. |
13 |
= |
At least one infection was detected and removed, but a restart is required. No errors were encountered. |
How to parse the log file
The Malicious Software Removal Tool writes details about the result of its execution in the %windir%\debug\mrt.log log file.
Notes-
This log file is available only in English.
-
Starting with version 1.2 of the removal tool (March 2005), this log file uses Unicode text. Before version 1.2, the log file used ANSI text.
-
The log file format has changed with version 1.2, and we recommend that you download and use the latest version of the tool.
If this log file already exists, the tool appends to the existing file. -
You can use a command script that resembles the previous example to capture the return code and to collect the files to a network share.
-
Because of the switch from ANSI to Unicode, version 1.2 of the removal tool will copy any ANSI versions of the Mrt.log file in the %windir%\debug folder to Mrt.log.old in the same directory. Version 1.2 also creates a new Unicode version of the Mrt.log file in that same directory. Like the ANSI version, this log file will be appended to each month's release.
The following example is an Mrt.log file from a computer that was infected with the MPnTestFile worm:
Microsoft Windows Malicious Software Removal Tool v5.3, August 2013 (build 5.3.9300.0)
Started On Tue Jul 30 23:34:49 2013
Quick Scan Results:
-------------------
Threat Detected: Virus:Win32/MPnTestFile.2004 and Removed!
Action: Remove, Result: 0x00000000
regkey://HKLM\SOFTWARE\MICROSOFT\WINDOWS\CURRENTVERSION\RUN\\v5mpn
runkey://HKLM\SOFTWARE\MICROSOFT\WINDOWS\CURRENTVERSION\RUN\\v5mpn
file://c:\temp\mpncleantest.exe
SigSeq: 0x00002267735A46E2
Results Summary:
----------------
Found Virus:Win32/MPnTestFile.2004 and Removed!
Microsoft Windows Malicious Software Removal Tool Finished On Tue Jul 30 23:35:39 2013
Return code: 6 (0x6)
The following is an example log file where no malicious software is found.
Microsoft Windows Malicious Software Removal Tool v5.3, August 2013 (build 5.3.9300.0)
Started On Thu Aug 01 21:15:43 2013
Results Summary:
----------------
No infection found.
Microsoft Windows Malicious Software Removal Tool Finished On Thu Aug 01 21:16:28 2013
Return code: 0 (0x0)
The following is a sample log file in which errors are found. For more information about warnings and errors that are caused by the tool, go to the following article in the Microsoft Knowledge Base:
891717 How to troubleshoot an error when you run the Microsoft Windows Malicious Software Removal Tool Microsoft Windows Malicious Software Removal Tool v5.3, August 2013 (build 5.3.9300.0) Started On Fri Aug 02 16:17:49 2013 Scan Results: ------------- Threat Detected: Virus:Win32/MPTestFile.2004, partially removed. Operation failed. Action: Clean, Result: 0x8007065E. Please use a full antivirus product ! ! file://d:\temp\mpcleantest.7z->mpcleantest.exe SigSeq: 0x00001080D2AE29FC containerfile://d:\temp\mpcleantest.7z Results Summary: ---------------- Found Virus:Win32/MPTestFile.2004, partially removed. Microsoft Windows Malicious Software Removal Tool Finished On Fri Aug 02 16:18:09 2013 Return code: 7 (0x7)
Known issues
Known issue 1
When you run the tool by using a startup script, error messages that resemble the following error message may be logged in the Mrt.log file:
Error: MemScanGetImagePathFromPid(pid: 552) failed.
0x00000005: Access is denied.Note The pid number will vary. This error message occurs when a process is just starting or when a process has been recently stopped. The only effect is that the process that is designated by the pid is not scanned.
Known issue 2
In some rare cases, if an administrator chooses to deploy the MSRT by using the /q quiet switch (also known as silent mode), this may not completely resolve cleaning for a small subset of infections in situations in which additional cleaning is required after a restart. This has been observed only in the removal of certain rootkit variants.
FAQ
Q1. When I test my startup or logon script to deploy the tool, I don't see the log files that are being copied to the network share that I set up. Why?
A1. This is frequently caused by permissions issues. For example, the account that the removal tool was run from does not have Write permission to the share. To troubleshoot this, first make sure that the tool ran by checking the registry key. Alternatively, you can look for the presence of the log file on the client computer. If the tool successfully ran, you can test a simple script and make sure that it can write to the network share when it runs under the same security context in which the removal tool was run. Q2. How do I verify that the removal tool has run on a client computer? A2. You can examine the value data for the following registry entry to verify the execution of the tool. You can implement such an examination as part of a startup script or a logon script. This process prevents the tool from running multiple times.Subkey: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\RemovalTools\MRT
Entry name: VersionEvery time that the tool is run, the tool records a GUID in the registry to indicate that it has been executed. This occurs regardless of the results of the execution. The following table lists the GUID that corresponds to each release.
ID |
Title |
---|---|
August 2024 |
07ABE911-9301-49C2-BA56-A1D482D7EACE |
July 2024 |
90986C28-62E9-42A1-8A1F-D641E4E8EBA1 |
June 2024 |
5A4C3BEA-A479-4F54-BE38-8AE39A47DE3F |
May 2024 |
4F9D9BB8-DAE6-4F3C-B2B0-4C461C52C120 |
April 2024 |
BE1901A0-58F6-432C-BB01-F2575A20D3E4 |
March 2024 |
59D35913-97A6-4AB2-A2F6-97908773E5F2 |
February 2024 |
325DE823-70F1-4125-BC00-7CC18A11E00B |
January 2024 |
738B258B-99BA-4C9A-8600-ED8A0BB1D024 |
November 2023 |
ABE6CED3-EAE8-4BBB-AE10-FB3F05CA9020 |
October 2023 |
E71B9E2F-EB6A-40AD-94F1-19CAA0BB032A |
September 2023 |
E51D9ECB-5D8F-4125-8AAA-38D8D92AA4C6 |
August 2023 |
DEE7C907-CBB0-4A09-99AE-9B8E34193ED6 |
July 2023 |
36FF48C4-BEC6-44C1-9B6C-82EE550BF050 |
June 2023 |
EF121ADE-1609-4DAF-9262-751D8ABBBDD0 |
May 2023 |
2513D400-AA6E-408E-BFC6-CC259D1EA45A |
April 2023 |
1B7A18EE-2F25-43D3-980E-C5BE2D343DD3 |
March 2023 |
FE6388DE-6736-42AA-8D43-7B7739607D83 |
February 2023 |
0CE14838-EA74-4C87-AF4A-E9B482CCCCC2 |
January 2023 |
E98B6D0B-B951-4C25-98D0-B03D83CA8642 |
December 2022 |
7F5C317E-E4A0-4D06-9292-8E7B0EABC82C |
November 2022 |
F10637FE-89BF-4611-B8A5-CA565D55A2A6 |
October 2022 |
CE7BF0F3-E664-422F-AA47-D5588871F45A |
September 2022 |
64F1036F-24EB-4790-95FF-C8D8E6BF9A52 |
August 2022 |
6A18629D-500E-437F-B64B-394F5EE7416E |
July 2022 |
BD5F3FC1-AE41-43E5-8775-ABA1EFA1BFDC |
June 2022 |
C63E2630-F9C8-4FC2-8DD3-8F8FC504D228 |
May 2022 |
1E134355-080F-4C0A-AAEB-5D74350F734B |
April 2022 |
2BC2E250-85C6-49C0-9BBC-5296D5ADE3E9 |
March 2022 |
528C99D1-D536-476A-97CC-AE56E360B841 |
February 2022 |
B5DDA3D9-48FA-4217-9F36-D9DC7FA91FD5 |
January 2022 |
A84F59DF-616B-4F7B-B64D-4F3C42C6E377 |
December 2021 |
5C859D8A-C553-48AA-AEE0-68E0FB58FD6C |
November 2021 |
F2DBB55A-EAF9-4F8D-BDD6-D2C15C5C6823 |
October 2021 |
4E7B66E3-987E-4788-BBB3-A5030922FC8D |
September 2021 |
2A9893F6-6CFA-4C4E-8CDC-F6C06E9ADAFD |
August 2021 |
2B0ABF61-2643-4716-9B15-4813BC505DF4 |
July 2021 |
8AE004C7-42D7-4FEC-9ABE-48A7E4C1CBC8 |
June 2021 |
E3A0B6EE-FE26-44C1-96DB-2BFDB5BDB305 |
May 2021 |
8586F868-D88E-461F-8C9F-85D50FCBCC84 |
April 2021 |
439B1947-E9BC-40E0-883D-517613D95818 |
March 2021 |
3DC01EF0-0E9D-4D88-8BC7-A3F3801FAB49 |
February 2021 |
45EEFC65-BFCF-458A-8760-ECC7ACEC73A2 |
January 2021 |
0AAB5944-A7BC-4D17-9A3A-2FAB07286EE9 |
November 2020 |
F7A1FB98-0884-4986-884D-FFBEA881A2A1 |
September 2020 |
E0118D9B-6F80-4A16-92ED-A8EB4851C84C |
May 2020 |
EFB903C3-1459-4C91-B79D-B7438E15C972 |
March 2020 |
71562B8C-C50D-4375-91F3-8EE0DD0EF7E3 |
February 2020 |
9CCD5E4F-11C8-4064-8C37-6D1BA8C1ED37 |
January 2020 |
38281425-A1C7-400F-AE79-EFE8C1E9E38F |
December 2019 |
6F46913B-8294-43FD-8AA8-46984911C881 |
November 2019 |
1ED49A70-3903-4C40-B575-93F3DD50B283 |
October 2019 |
E63797FA-851A-4E25-8DA1-D453DD437525 |
August 2019 |
96F83121-A86A-497A-8B18-7F1BBAE6448D |
July 2019 |
FCF0D56B-99A4-4A39-BAC8-2ED52EF10FEC |
June 2019 |
10188A60-F140-42EF-984F-E4B3CA369BD1 |
May 2019 |
A8F12582-E642-4070-91E6-D6CF31796C0B |
April 2019 |
7C55425A-FBE7-44D0-A226-6FF46F085EAF |
March 2019 |
5DCD306C-136C-4C03-B0E4-3C1E78DE5A19 |
February 2019 |
3A57513A-D489-4B41-A40D-5ACD998F294A |
January 2019 |
8F732BDE-182D-4A10-B8CE-0C538C878F87 |
December 2018 |
FD672828-AC76-41B9-95E0-6F5859BDDB74 |
November 2018 |
F1E75593-4ACF-4C29-BD2D-0F495D7B8396 |
October 2018 |
D84C2D59-B81F-4163-BC39-3CDDD8BB68BC |
September 2018 |
18674908-417F-4139-A22C-F418420D2B7B |
August 2018 |
6600605A-7534-41BF-B117-579EA0F5997D |
July 2018 |
3A88B54D-626C-4DBE-BBB3-4EE0E666A730 |
June 2018 |
968E16D7-8605-4BA4-9BE5-86127A0FAC87 |
May 2018 |
02683B53-543A-4200-8D43-B69C3B3CE0E9 |
April 2018 |
62F357BA-9FC0-4CED-A90C-457D02B33DEE |
March 2018 |
C43B8734-0004-446C-8F37-FD8AD3F3BCF0 |
February 2018 |
CED42968-8B11-4886-8477-8F22956192B0 |
January 2018 |
C6BD56EC-B2C1-4D20-B94D-234F8A9C5733 |
December 2017 |
3D287184-25B3-4DDC-ADD3-A93C626CD7EB |
November 2017 |
AAF1DA7A-77D4-4997-9C0C-38E0CFA6AB92 |
October 2017 |
9209C00F-BD62-4CB8-9702-C4B9A4F8D560 |
September 2017 |
FE854017-795E-4685-95CE-3CCB1FFD743D |
August 2017 |
1D3AE7A6-F7BA-4787-A240-284C46162AFA |
July 2017 |
2A9D9E6C-14F4-4E84-B9B5-B307DDACA125 |
June 2017 |
28BE7B9C-E473-4A73-8770-83AB99A596F8 |
May 2017 |
E43CFF1D-46DB-4239-A583-3828BB9EB66C |
April 2017 |
507CBE5F-7915-416A-9E0E-B18FEA08237D |
March 2017 |
F83889D4-A24B-44AA-8E34-BCDD8912FAD7 |
February 2017 |
88E3BAB3-52CF-4B15-976E-0BE4CFA98AA8 |
January 2017 |
A5E600F5-A3CE-4C8E-8A14-D4133623CDC5 |
December 2016 |
F6945BD2-D48B-4B07-A7FB-A55C4F98A324 |
November 2016 |
E36D6367-DF23-4D09-B5B1-1FC38109F29C |
October 2016 |
6AC744F7-F828-4CF8-A405-AA89845B2D98 |
September 2016 |
2168C094-1DFC-43A9-B58E-EB323313845B |
August 2016 |
0F13F87E-603E-4964-A9B4-BF923FB27B5D |
July 2016 |
34E69BB2-EFA0-4905-B7A9-EFBDBA61647B |
June 2016 |
E6F49BC4-1AEA-4648-B235-1F2A069449BF |
May 2016 |
156D44C7-D356-4303-B9D2-9B782FE4A304 |
April 2016 |
6F31010B-5919-41C2-94FB-E71E8EEE9C9A |
March 2016 |
3AC662F4-BBD5-4771-B2A0-164912094D5D |
February 2016 |
DD51B914-25C9-427C-BEC8-DA8BB2597585 |
January 2016 |
ED6134CC-62B9-4514-AC73-07401411E1BE |
December 2015 |
EE51DBB1-AE48-4F16-B239-F4EB7B2B5EED |
November 2015 |
FFF3C6DF-56FD-4A28-AA12-E45C3937AB41 |
October 2015 |
4C5E10AF-1307-4E66-A279-5877C605EEFB |
September 2015 |
BC074C26-D04C-4625-A88C-862601491864 |
August 2015 |
74E954EF-6B77-4758-8483-4E0F4D0A73C7 |
July 2015 |
82835140-FC6B-4E05-A17F-A6B9C5D7F9C7 |
June 2015 |
20DEE2FA-9862-4C40-A1D4-1E13F1B9E8A7 |
May 2015 |
F8F85141-8E6C-4FED-8D4A-8CF72D6FBA21 |
April 2015 |
7AABE55A-B025-4688-99E9-8C66A2713025 |
March 2015 |
CEF02A7E-71DD-4391-9BF6-BF5DEE8E9173 |
February 2015 |
92D72885-37F5-42A2-B199-9DBBEF797448 |
January 2015 |
677022D4-7EC2-4F65-A906-10FD5BBCB34C |
December 2014 |
386A84B2-5559-41C1-AC7F-33E0D5DE0DF6 |
November 2014 |
7F08663E-6A54-4F86-A6B5-805ADDE50113 |
October 2014 |
5612279E-542C-454D-87FE-92E7CBFDCF0F |
September 2014 |
98CB657B-9051-439D-9A5D-8D4EDF851D94 |
August 2014 |
53B5DBC4-54C7-46E4-B056-C6F17947DBDC |
July 2014 |
43E0374E-D98E-4266-AB02-AE415EC8E119 |
June 2014 |
07C5D15E-5547-4A58-A94D-5642040F60A2 |
May 2014 |
91EFE48B-7F85-4A74-9F33-26952DA55C80 |
April 2014 |
54788934-6031-4F7A-ACED-5D055175AF71 |
March 2014 |
?254C09FA-7763-4C39-8241-76517EF78744 |
February 2014 |
FC5CF920-B37A-457B-9AB9-36ECC218A003 |
January 2014 |
7BC20D37-A4C7-4B84-BA08-8EC32EBF781C |
December 2013 |
AFAFB7C5-798B-453D-891C-6765E4545CCC |
November 2013 |
BA6D0F21-C17B-418A-8ADD-B18289A02461 |
October 2013 |
21063288-61F8-4060-9629-9DBDD77E3242 |
September 2013 |
462BE659-C07A-433A-874F-2362F01E07EA |
August 2013 |
B6345F3A-AFA9-42FF-A5E7-DFC6C57B7EF8 |
July 2013 |
9326E352-E4F2-4BF7-AF54-3C06425F28A6 |
June 2013 |
4A25C1F5-EA3D-4840-8E14-692DD6A57508 |
May 2013 |
3DAA6951-E853-47E4-B288-257DCDE1A45A |
April 2013 |
7A6917B5-082B-48BA-9DFC-9B7034906FDC |
March 2013 |
147152D2-DFFC-4181-A837-11CB9211D091 |
February 2013 |
ED5E6E45-F92A-4096-BF7F-F84ECF59F0DB |
January 2013 |
A769BB72-28FC-43C7-BA14-2E44725FED20 |
December 2012 |
AD64315C-1421-4A96-89F4-464124776078 |
November 2012 |
7D0B34BB-97EB-40CE-8513-4B11EB4C1BD6 |
October 2012 |
8C1ACB58-FEE7-4FF0-972C-A09A058667F8 |
September 2012 |
02A84536-D000-45FF-B71E-9203EFD2FE04 |
August 2012 |
C1156343-36C9-44FB-BED9-75151586227B |
July 2012 |
3E9B6E28-8A74-4432-AD2A-46133BDED728 |
June 2012 |
4B83319E-E2A4-4CD0-9AAC-A0AB62CE3384 |
May 2012 |
D0082A21-13E4-49F7-A31D-7F752F059DE9 |
April 2012 |
3C1A9787-5E87-45E3-9B0B-21A6AB25BF4A |
March 2012 |
84C44DD1-20C8-4542-A1AF-C3BA2A191E25 |
February 2012 |
23B13CB9-1784-4DD3-9504-7E58427307A7 |
January 2012 |
634F47CA-D7D7-448E-A7BE-0371D029EB32 |
December 2011 |
79B9D6F6-2990-4C15-8914-7801AD90B4D7 |
November 2011 |
BEB9D90D-ED88-42D7-BD71-AE30E89BBDC9 |
October 2011 |
C0177BCC-8925-431B-AC98-9AC87B8E9699 |
September 2011 |
E775644E-B0FF-44FA-9F8B-F731E231B507 |
August 2011 |
F14DDEA8-3541-40C6-AAC7-5A0024C928A8 |
July 2011 |
3C009D0B-2C32-4635-9B34-FFA7F4CB42E7 |
June 2011 |
DDE7C7DD-E76A-4672-A166-159DA2110CE5 |
May 2011 |
852F70C7-9C9E-4093-9184-D89D5CE069F0 |
April 2011 |
0CB525D5-8593-436C-9EB0-68C6D549994D |
March 2011 |
AF70C509-22C8-4369-AEC6-81AEB02A59B7 |
February 2011 |
B3458687-D7E4-4068-8A57-3028D15A7408 |
January 2011 |
258FD3CF-9C82-4112-B1B0-18EC1ECFED37 |
December 2010 |
4E28B496-DD95-4300-82A6-53809E0F9CDA |
November 2010 |
5800D663-13EA-457C-8CFD-632149D0AEDD |
October 2010 |
32F1A453-65D6-41F0-A36F-D9837A868534 |
September 2010 |
0916C369-02A8-4C3D-9AD0-E72AF7C46025 |
August 2010 |
E39537F7-D4B8-4042-930C-191A2EF18C73 |
July 2010 |
A1A3C5AF-108A-45FD-ABEC-5B75DF31736D |
June 2010 |
308738D5-18B0-4CB8-95FD-CDD9A5F49B62 |
May 2010 |
18C7629E-5F96-4BA8-A2C8-31810A54F5B8 |
April 2010 |
D4232D7D-0DB6-4E8B-AD19-456E8D286D67 |
March 2010 |
076DF31D-E151-4CC3-8E0A-7A21E35CF679 |
February 2010 |
76D836AA-5D94-4374-BCBF-17F825177898 |
January 2010 |
ED3205FC-FC48-4A39-9FBD-B0035979DDFF |
December 2009 |
A9A7C96D-908E-413C-A540-C43C47941BE4 |
November 2009 |
78070A38-A2A9-44CE-BAB1-304D4BA06F49 |
October 2009 |
4C64200A-6786-490B-9A0C-DEF64AA03934 |
September 2009 |
B279661B-5861-4315-ABE9-92A3E26C1FF4 |
August 2009 |
91590177-69E5-4651-854D-9C95935867CE |
July 2009 |
F530D09B-F688-43D1-A3D5-49DC1A8C9AF0 |
June 2009 |
8BD71447-AAE4-4B46-B652-484001424290 |
May 2009 |
AC36AF73-B1E8-4CC1-9FF3-5A52ABB90F96 |
April 2009 |
276F1693-D132-44EF-911B-3327198F838B |
March 2009 |
BDEB63D0-4CEC-4D5B-A360-FB1985418E61 |
February 2009 |
C5E3D402-61D9-4DDF-A8F5-0685FA165CE8 |
January 2009 |
2B730A83-F3A6-44F5-83FF-D9F51AF84EA0 |
December 2008 |
9BF57AAA-6CE6-4FC4-AEC7-1B288F067467 |
November 2008 |
F036AE17-CD74-4FA5-81FC-4FA4EC826837 |
October 2008 |
131437DE-87D3-4801-96F0-A2CB7EB98572 |
September 2008 |
7974CF06-BE58-43D5-B635-974BD92029E2 |
August 2008 |
F3889559-68D7-4AFB-835E-E7A82E4CE818 |
July 2008 |
BC308029-4E38-4D89-85C0-8A04FC9AD976 |
June 2008 |
0D9785CC-AEEC-49F7-81A8-07B225E890F1 |
May 2008 |
0A1A070A-25AA-4482-85DD-DF69FF53DF37 |
April 2008 |
F01687B5-E3A4-4EB6-B4F7-37D8F7E173FA |
March 2008 |
24A92A45-15B3-412D-9088-A3226987A476 |
February 2008 |
0E918EC4-EE5F-4118-866A-93f32EC73ED6 |
January 2008 |
330FCFD4-F1AA-41D3-B2DC-127E699EEF7D |
December 2007 |
73D860EC-4829-44DD-A064-2E36FCC21D40 |
November 2007 |
EFC91BC1-FD0D-42EE-AA86-62F59254147F |
October 2007 |
52168AD3-127E-416C-B7F6-068D1254C3A4 |
September 2007 |
A72DDD48-8356-4D06-A8E0-8D9C24A20A9A |
August 2007 |
0CEFC17E-9325-4810-A979-159E53529F47 |
July 2007 |
4AD02E69-ACFE-475C-9106-8FB3D3695CF8 |
June 2007 |
234C3382-3B87-41ca-98D1-277C2F5161CC |
May 2007 |
15D8C246-6090-450f-8261-4BA8CA012D3C |
April 2007 |
57FA0F48-B94C-49ea-894B-10FDA39A7A64 |
March 2007 |
5ABA0A63-8B4C-4197-A6AB-A1035539234D |
February 2007 |
FFCBCFA5-4EA1-4d66-A3DC-224C8006ACAE |
January 2007 |
2F9BC264-1980-42b6-9EE3-2BE36088BB57 |
December 2006 |
621498ca-889b-48ef-872b-84b519365c76 |
November 2006 |
1d21fa19-c296-4020-a7c2-c5a9ba4f2356 |
October 2006 |
79e385d0-5d28-4743-aeb3-ed101c828abd |
September 2006 |
ac3fa517-20f0-4a42-95ca-6383f04773c8 |
August 2006 |
37949d24-63f1-4fdc-ad24-5dc3eb3ad265 |
July 2006 |
5df61377-4916-440f-b23f-321933b0afd3 |
June 2006 |
7cf4b321-c0dd-42d9-afdf-edbb85e59767 |
May 2006 |
ce818d5b-8a25-47c0-a9cd-7169da3f9b99 |
April 2006 |
d0f3ea76-76c8-4287-8cdf-bdfee5e446ec |
March 2006 |
b5784f56-32ca-4756-a521-ca57816391ca |
February 2006 |
99cb494b-98bf-4814-bff0-cf551ac8e205 |
January 2006 |
250985ee-62e6-4560-b141-997fc6377fe2 |
December 2005 |
F8FEC144-AA00-48B8-9910-C2AE9CCE014A |
November 2005 |
1F5BA617-240A-42FF-BE3B-14B88D004E43 |
October 2005 |
08FFB7EB-5453-4563-A016-7DBC4FED4935 |
September 2005 |
33B662A4-4514-4581-8DD7-544021441C89 |
August 2005 A |
4066DA74-2DDE-4752-8186-101A7C543C5F |
August 2005 |
3752278B-57D3-4D44-8F30-A98F957EC3C8 |
July 2005 |
2EEAB848-93EB-46AE-A3BF-9F1A55F54833 |
June 2005 |
63C08887-00BE-4C9B-9EFC-4B9407EF0C4C |
May 2005 |
08112F4F-11BF-4129-A90A-9C8DD0104005 |
April 2005 |
D89EBFD1-262C-4990-9927-5185FED1F261 |
March 2005 |
F8327EEF-52AA-439A-9950-CE33CF0D4FDD |
February 2005 |
805647C6-E5ED-4F07-9E21-327592D40E83 |
January 2005 |
E5DD9936-C147-4CD1-86D3-FED80FAADA6C |
Q3. How can I disable the infection-reporting component of the tool so that the report is not sent back to Microsoft? A3. An administrator can choose to disable the infection-reporting component of the tool by adding the following registry key value to computers. If this registry key value is set, the tool will not report infection information back to Microsoft.
Subkey: HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\MRT
Entry name: \DontReportInfectionInformation Type: REG_DWORD Value data: 1Q4. In the March 2005 release, data in the Mrt.log file appears to have been lost. Why was this data removed, and is there a way for me to retrieve it?
A4. Starting in the March 2005 release, the Mrt.log file is being written as a Unicode file. To make sure of compatibility, when the March 2005 version of the tool is run, if an ANSI version of the file is on the system, the tool will copy the contents of that log to Mrt.log.old in %WINDIR%\debug and create a new Unicode version of Mrt.log. Like the ANSI version, this Unicode version will be appended to with each successive execution of the tool.Skipped releases
No MSRT update was released in the following months:
-
December 2023