Security update deployment information: May 9, 2017

Security update file names

For all supported 32-bit editions of Windows Server 2008:

Windows6.0-KB3078601-x86.msu
Windows6.0-KB4018196-x86.msu
Windows6.0-KB4018466-x86.msu
Windows6.0-KB4018556-x86.msu
Windows6.0-KB4018821-x86.msu
Windows6.0-KB4018885-x86.msu
Windows6.0-KB4018927-x86.msu
Windows6.0-KB4019149-x86.msu
Windows6.0-KB4019204-x86.msu
Windows6.0-KB4019206-x86.msu

For all supported x64-based editions of Windows Server 2008:

Windows6.0-KB4018196-x64.msu
Windows6.0-KB4018466-x64.msu
Windows6.0-KB4018556-x64.msu
Windows6.0-KB4018821-x64.msu
Windows6.0-KB4018885-x64.msu
Windows6.0-KB4018927-x64.msu
Windows6.0-KB4019149-x64.msu
Windows6.0-KB4019204-x64.msu
Windows6.0-KB4019206-x64.msu

For all supported Itanium-based editions of Windows Server 2008:

Windows6.0-KB4018466-ia64.msu
Windows6.0-KB4018556-ia64.msu
Windows6.0-KB4018821-ia64.msu
Windows6.0-KB4018885-ia64.msu
Windows6.0-KB4018927-ia64.msu
Windows6.0-KB4019149-ia64.msu
Windows6.0-KB4019204-ia64.msu
Windows6.0-KB4019206-ia64.msu

Installation switches

See Microsoft Knowledge Base article 934307

Restart requirement

You must restart the system after you apply this security update.

Removal information

WUSA.exe does not support uninstalling updates. To uninstall an update that is installed by WUSA, click Control Panel, and then click Security. Under Windows Update, click View installed updates, and then select from the list of updates.

File information

See Microsoft Knowledge Base article 3078601
See Microsoft Knowledge Base article 4018196
See Microsoft Knowledge Base article 4018466
See Microsoft Knowledge Base article 4018556
See Microsoft Knowledge Base article 4018821
See Microsoft Knowledge Base article 4018885
See Microsoft Knowledge Base article 4018927
See Microsoft Knowledge Base article 4019149
See Microsoft Knowledge Base article 4019204
See Microsoft Knowledge Base article 4019206

Registry key verification

Note This update does not add a registry key to validate its installation.

Security update file names

For Internet Explorer 9 in all supported 32-bit editions of Windows Server 2008:
IE9-Windows6.0-KB4018271-x86.msu

For Internet Explorer 10 in all supported editions of Windows Server 2012:
Windows8-RT-KB4018271-x86.msu

For Internet Explorer 11 in Windows 7 for 32-bit Systems Service Pack 1:
IE11-Windows6.1-KB4018271-x86.msu

For Internet Explorer 11 in all supported 32-bit editions of Windows 8.1:
Windows8.1-KB4018271-x86.msu

For Internet Explorer 11 in all supported editions of Windows Server 2012 R2:
Windows8.1-KB4018271-x64.msu

For Internet Explorer 11 in Windows 7 for x64-based Systems Service Pack 1:
IE11-Windows6.1-KB4018271-x64.msu

For Internet Explorer 11 in Windows Server 2008 R2 for x64-based Systems Service Pack 1:
IE11-Windows6.1-KB4018271-x64.msu

For Internet Explorer 11 in all supported x64-based editions of Windows 8.1:
Windows8.1-KB4018271-x64.msu

Installation switches

See Microsoft Knowledge Base article 934307

Restart requirement

You must restart the system after you apply this security update.

Removal information

WUSA.exe does not support uninstalling updates. To uninstall an update that is installed by WUSA, click Control Panel, and then click Security. Under Windows Update, click View installed updates, and then select from the list of updates.

File information

See Microsoft Knowledge Base article 4018271

Registry key verification

Note This update does not add a registry key to validate its installation.

Security update file name

Microsoft Office 2007 suites
riched202007-kb2596904-fullfile-x86-glb.exe

Microsoft Office 2007 suites
mso2007-kb3191895-fullfile-x86-glb.exe

Microsoft Office Word 2007:
word2007-kb3191836-fullfile-x86-glb.exe

Microsoft Office Compatibility Pack Service Pack 3:
wordconv2007-kb3191835-fullfile-x86-glb.exe

Microsoft Word Viewer:
office-kb3191909-fullfile-enu.exe

Installation switches

See Microsoft Knowledge Base article 912203

Restart requirement

In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

To help reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base article 887012.

Removal information

Use the Add or Remove Programs item in Control Panel.

File information

See Microsoft Knowledge Base article 2596904
See Microsoft Knowledge Base article 3191895
See Microsoft Knowledge Base article 3191836
See Microsoft Knowledge Base article 3191835
See Microsoft Knowledge Base article 3191909

Registry key verification

Not applicable

Security update file name

For Microsoft Office 2010 Service Pack 2 (32-bit editions):
convloc2010-kb3118310-fullfile-x86-glb.exe

For Microsoft Office 2010 Service Pack 2 (64-bit editions)
convloc2010-kb3118310-fullfile-x64-glb.exe

For Microsoft Office 2010 Service Pack 2 (32-bit editions):
mso2010-kb3191899-fullfile-x86-glb.exe

For Microsoft Office 2010 Service Pack 2 (64-bit editions)
mso2010-kb3191899-fullfile-x64-glb.exe

For Microsoft Office 2010 Service Pack 2 (32-bit editions):
kb24286772010-kb3191841-fullfile-x86-glb.exe

For Microsoft Office 2010 Service Pack 2 (64-bit editions)
kb24286772010-kb3191841-fullfile-x64-glb.exe

For Microsoft Word 2010 Service Pack 2 (32-bit editions):
word2010-kb3191843-fullfile-x86-glb.exe

For Microsoft Word 2010 Service Pack 2 (64-bit editions)):
word2010-kb3191843-fullfile-x64-glb.exe

Installation switches

See Microsoft Knowledge Base article 912203

Restart requirement

In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

To reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base article 887012.

Removal information

Use the Add or Remove Programs item in Control Panel.

File information

See Microsoft Knowledge Base article 3118310
See Microsoft Knowledge Base article 3191899
See Microsoft Knowledge Base article 3191841
See Microsoft Knowledge Base article 3191843

Registry key verification

Not applicable

Security update file name

For Microsoft Word 2013 Service Pack 1 (32-bit editions):
word2013-kb3178729-fullfile-x86-glb.exe

For Microsoft Word 2013 Service Pack 1 (64-bit editions):
word2013-kb3178729-fullfile-x64-glb.exe

Microsoft Office 2013 Service Pack 1 (32-bit editions):
conv2013-kb3172458-fullfile-x86-glb.exe

Microsoft Office 2013 Service Pack 1 (64-bit editions):
conv2013-kb3172458-fullfile-x64-glb.exe

Microsoft Office 2013 Service Pack 1 (32-bit editions):
mso2013-kb3191885-fullfile-x86-glb.exe

Microsoft Office 2013 Service Pack 1 (64-bit editions):
mso2013-kb3191885-fullfile-x64-glb.exe

Installation switches

See Microsoft Knowledge Base article 912203

Restart requirement

In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

To reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base article 887012.

Removal information

Use the Add or Remove Programs item in Control Panel.

File information

See Microsoft Knowledge Base article 3178729
See Microsoft Knowledge Base article 3172458
See Microsoft Knowledge Base article 3191885

Registry key verification

Not applicable

Deployment

The 3172519 update for Microsoft Word 2013 RT is available via Windows Update.

Restart requirement

In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

To help reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base article 887012.

Removal information

Click Control Panel, click System and Security, click Windows Update under See also, click Installed updates, and then select from the list of updates.

File information

See Microsoft Knowledge Base article 3178729
 

Security update file name

For Microsoft Office 2016 (32-bit edition):
conv2016-kb3114375-fullfile-x86-glb.exe

For Microsoft Office 2016 (64-bit edition):
conv2016-kb3114375-fullfile-x64-glb.exe

For Microsoft Office 2016 (32-bit edition):
msodll99l2016-kb3191863-fullfile-x86-glb.exe

For Microsoft Office 2016 (64-bit edition):
msodll99l2016-kb3191863-fullfile-x64-glb.exe

For Microsoft Office 2016 (32-bit edition):
mso2016-kb3191881-fullfile-x86-glb.exe

For Microsoft Office 2016 (64-bit edition):
mso2016-kb3191881-fullfile-x64-glb.exe

For Microsoft Word 2016 (32-bit edition):
word2016-kb3191865-fullfile-x86-glb.exe

For Microsoft Word 2016 (64-bit edition):
word2016-kb3191865-fullfile-x64-glb.exe

Installation switches

See Microsoft Knowledge Base article 912203

Restart requirement

In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

To reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base article 887012.

Removal information

Use the Add or Remove Programs item in Control Panel.

File information

See Microsoft Knowledge Base article 3114375
See Microsoft Knowledge Base article 3191863
See Microsoft Knowledge Base article 3191881
See Microsoft Knowledge Base article 3191865

Registry key verification

Not applicable

Security update file name

For Word Automation Services on Microsoft SharePoint Server 2010 Service Pack 2:
wdsrv2010-kb3191839-fullfile-x64-glb.exe

Installation switches

See Microsoft Knowledge Base article 912203

Restart requirement

After you install this security update on all SharePoint servers, you must run the PSconfig tool to complete the installation process.

You may have to restart the computer after you install this security update.

In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message is displayed that advises you to restart the computer.

To reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base article 887012.

Removal information

This security update cannot be removed.

File Information

See Microsoft Knowledge Base article 3191839

Registry key verification

Not applicable

Security update file name

For Microsoft Sharepoint Server 2013 Service Pack 1:
 

For Microsoft Sharepoint Server 2013 Service Pack 1:
osfserver2013-kb3172475-fullfile-x64-glb.exe

For Microsoft Sharepoint Server 2013 Service Pack 1:
sts2013-kb3191914-fullfile-x64-glb.exe

For Microsoft Sharepoint Server 2013 Service Pack 1:
lpsrvloc2013-kb3162068-fullfile-x64-glb.exe

For Microsoft Sharepoint Server 2013 Service Pack 1:
ppsmaloc2013-kb3162069-fullfile-x64-glb.exe

For Microsoft Sharepoint Server 2013 Service Pack 1:
wasrvloc2013-kb3172482-fullfile-x64-glb.exe

For Microsoft Sharepoint Server 2013 Service Pack 1:
eduloc2013-kb3172532-fullfile-x64-glb.exe

For Microsoft Sharepoint Server 2013 Service Pack 1:
ifsloc2013-kb3172536-fullfile-x64-glb.exe

For Microsoft Sharepoint Server 2013 Service Pack 1:
acsrvloc2013-kb3178633-fullfile-x64-glb.exe

For Microsoft Sharepoint Server 2013 Service Pack 1:
vsrvloc2013-kb3178638-fullfile-x64-glb.exe

For Microsoft Sharepoint Server 2013 Service Pack 1:
coreserverloc2013-kb3191886-fullfile-x64-glb.exe

For Microsoft SharePoint Foundation 2013 Service Pack 1:
smsloc2013-kb3162054-fullfile-x64-glb.exe

For Excel Services on Microsoft Sharepoint Server 2013 Service Pack 1:
xlsrvloc2013-kb3191887-fullfile-x64-glb.exe

For Word Automation Services on For Microsoft Sharepoint Server 2013 Service Pack 1:
wdsrvloc2013-kb3162040-fullfile-x64-glb.exe

For Microsoft Project Server 2013 Service Pack 1:
pjsrvloc2013-kb3191890-fullfile-x64-glb.exe

Installation switches

See Microsoft Knowledge Base article 912203

Restart requirement

In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

To reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base article 887012.

Removal information

This security update cannot be removed.

File Information

See Microsoft Knowledge Base article 3172475
See Microsoft Knowledge Base article 3191914
See Microsoft Knowledge Base article 3162068
See Microsoft Knowledge Base article 3162069
See Microsoft Knowledge Base article 3172482
See Microsoft Knowledge Base article 3172532
See Microsoft Knowledge Base article 3172536
See Microsoft Knowledge Base article 3178633
See Microsoft Knowledge Base article 3178638
See Microsoft Knowledge Base article 3191886
See Microsoft Knowledge Base article 3162054
See Microsoft Knowledge Base article 3191887
See Microsoft Knowledge Base article 3191890
See Microsoft Knowledge Base article 3162040

Registry key verification

Not applicable

Security update file name

For Microsoft SharePoint Enterprise Server 2016:
sts2016-kb3191880-fullfile-x64-glb.exe

Installation switches

See Microsoft Knowledge Base article 912203

Restart requirement

After you install this security update on all SharePoint servers, you must run the PSconfig tool to complete the installation process.

You may have to restart the computer after you install this security update.

In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message is displayed that advises you to restart the computer.

To help reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base article 887012.

Removal information

This security update cannot be removed.

File Information

See Microsoft Knowledge Base article 3191880

Registry key verification

Not applicable

Security update file name

Microsoft Office Web Apps 2010 Service Pack 2:
wac2010-kb3191904-fullfile-x64-glb.exe

Installation switches

See Microsoft Knowledge Base article 912203

Restart requirement

In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

To reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base article 887012.

Removal information

This security update cannot be removed.

File Information

See Microsoft Knowledge Base article 3191904

Registry key verification

Not applicable

Security update file name

For all supported editions of Microsoft Office Web Apps Server 2013 Service Pack 2:
wacserver2013-kb3191888-fullfile-x64-glb.exe

Installation switches

See Microsoft Knowledge Base article 912203

Restart requirement

In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

To reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base article 887012.

Removal information

This security update cannot be removed.

File Information

See Microsoft Knowledge Base article 3191888

Registry key verification

Not applicable

Security update file name

For all supported editions of Office Online Server:
wacserver2016-kb-3191915-fullfile-x64-glb

Installation switches

See Microsoft Knowledge Base article 912203

Restart requirement

In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

To reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base article 887012.

Removal information

This security update cannot be removed.

File Information

See Microsoft Knowledge Base article 3191915

Registry key verification

Not applicable

Security update file name

Skype for Business 2016 (32-bit)
lync2016-kb3191858-fullfile-x86-glb.exe

Skype for Business 2016 (64-bit)
lync2016-kb3191858-fullfile-x64-glb.exe

Installation switches

See Microsoft Knowledge Base article 912203

Restart requirement

In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

To reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base article 887012.

Removal information

This security update cannot be removed.

File Information

See Microsoft Knowledge Base article 3191858

Registry key verification

Not applicable

Security update file names

For Microsoft .NET Framework 2.0 Service Pack 2 on Windows Server 2008 for 32-bit Systems Service Pack 2:
Windows6.0-KB4014575-x86.msu

For Microsoft .NET Framework 4.5.2 when installed on all supported 32-bit editions of Windows Server 2008 Service Pack 2:
NDP45-KB4014599-x86.exe

For Microsoft .NET Framework 4.6 when installed on all supported 32-bit editions of Windows Server 2008 Service Pack 2:
NDP46-KB4014591-x86.exe

For Microsoft .NET Framework 2.0 Service Pack 2 on Windows Server 2008 for x64-based Systems Service Pack 2:
Windows6.0-KB4014575-x64.msu

For Microsoft .NET Framework 4.5.2 on all supported x64-based editions of Windows Server 2008 Service Pack 2:
NDP45-KB4014599-x64.exe

For Microsoft .NET Framework 4.6 on all supported x64-based editions of Windows Server 2008 Service Pack 2:
NDP46-KB4014591-x64.exe

For Microsoft .NET Framework 2.0 Service Pack 2 on Windows Server 2008 for Itanium-based Systems Service Pack 2:
Windows6.0-KB4014575-ia64.msu

Installation switches

See Microsoft Knowledge Base article 2844699

Update log file

For Microsoft .NET Framework 2.0 Service Pack 2:
Not applicable

For Microsoft .NET Framework 4.5.2:
KB4014599_*_*-Microsoft .NET Framework [.NET target version]-MSP0.txt
KB4014599_*_*.html

For Microsoft .NET Framework 4.6:
KB4014591_*_*-Microsoft .NET Framework 4.6/4.6.1-MSP0.txt
KB4014591_*_*.html

Restart requirement

This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

Removal information

Click Control Panel, and then click Security. Under Windows Update, click View installed updates, and then select from the list of updates.

File information

See Microsoft Knowledge Base article 4014575
See Microsoft Knowledge Base article 4014599
See Microsoft Knowledge Base article 4014591

Registry key verification

For Microsoft .NET Framework 2.0 Service Pack 2 (4014575):
This update does not add a registry key to validate its installation. Use WMI to detect for the presence of this update.

For Microsoft .NET Framework 4.5.2:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework [.NET target version]\KB4014599
”ThisVersionInstalled” = “Y”

For Microsoft .NET Framework 4.6:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework 4.6\KB4014591
"ThisVersionInstalled" = "Y"

Security update file name

For Microsoft .NET Framework 3.5.1 on all supported 32-bit editions of Windows 7 Service Pack 1:
Windows6.1-KB4014579-x86.msu

For Microsoft .NET Framework 4.5.2 when installed on all supported 32-bit editions of Windows 7 Service Pack 1:
NDP45-KB4014599-x86.exe

For Microsoft .NET Framework 4.6/4.6.1 when installed on all supported 32-bit editions of Windows 7 Service Pack 1:
NDP46-KB4014591-x86.exe

For Microsoft .NET Framework 4.6.2 on all supported 32-bit editions of Windows 7 Service Pack 1:
NDP46-KB4014588-x86.exe

For Microsoft .NET Framework 3.5.1 on all supported x64-based editions of Windows 7 Service Pack 1:
Windows6.1-KB4014579-x64.msu

For Microsoft .NET Framework 4.5.2 when installed on all supported x64-based editions of Windows 7 Service Pack 1:
NDP45-KB4014599-x86.exe

For Microsoft .NET Framework 4.6/4.6.1 when installed on all supported x64-based editions of Windows 7 Service Pack 1:
NDP46-KB4014591-x64.exe

For Microsoft .NET Framework 4.6.2 on all supported x64-based editions of Windows 7 Service Pack 1:
NDP46-KB4014588-x64.exe

Installation switches

See Microsoft Knowledge Base article 2844699

Update log file

For Microsoft .NET Framework 3.5.1:
Not applicable

For Microsoft .NET Framework 4.5.2:
KB4014599_*_*-Microsoft .NET Framework [.NET target version]-MSP0.txt
KB4014599_*_*.html

For Microsoft .NET Framework 4.6/4.6.1:
KB4014591_*_*-Microsoft .NET Framework 4.6/4.6.1-MSP0.txt
KB4014591_*_*.html

For Microsoft .NET Framework 4.6.2:
Not applicable

Restart requirement

This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

Removal information

Click Control Panel, click System and Security under Windows Update, click View installed updates, and then select from the list of updates.

File information

See Microsoft Knowledge Base article 4014579
See Microsoft Knowledge Base article 4014599
See Microsoft Knowledge Base article 4014591
See Microsoft Knowledge Base article 4014588

Registry key verification

For Microsoft .NET Framework 3.5.1:
This update does not add a registry key to validate its installation. Use WMI to detect for the presence of this update.

For Microsoft .NET Framework 4.5.2:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework [.NET target version]\KB4014599
”ThisVersionInstalled” = “Y”

For Microsoft .NET Framework 4.6/4.6.1:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework 4.6\KB4014591
"ThisVersionInstalled" = "Y"

For Microsoft .NET 4.6.2:
This update does not add a registry key to validate its installation. Use WMI to detect this update.

Security update file name

For Microsoft .NET Framework 3.5.1 on all supported x64-based editions of Windows Server 2008 R2 Service Pack 1:
Windows6.1-KB4014579-x64.msu

For Microsoft .NET Framework 4.5.2 when installed on all supported x64-based editions of Windows Server 2008 R2 Service Pack 1:
NDP45-KB4014599-x64.exe

For Microsoft .NET Framework 4.6/4.6.1 when installed on all supported 32-bit editions of Windows 7 Service Pack 1:
NDP46-KB4014591-x64.exe

For Microsoft .NET Framework 4.6.2 on all supported x64-based editions of Windows Server 2008 R2 Service Pack 1:
NDP46-KB4014588-x64.exe

For Microsoft .NET Framework 3.5.1 on Windows Server 2008 R2 for Itanium-based Systems Service Pack 1:
Windows6.1-KB4014579-ia64.msu

Installation switches

See Microsoft Knowledge Base article 2844699

Update log file

For Microsoft .NET Framework 3.5.1:
Not applicable

For Microsoft .NET Framework 4.5.2:
KB4014566_*_*-Microsoft .NET Framework [.NET target version]-MSP0.txt
KB4014566_*_*.html

For Microsoft .NET Framework 4.6/4.6.1:
KB4014558_*_*-Microsoft .NET Framework 4.6/4.6.1-MSP0.txt
KB4014558_*_*.html

For Microsoft .NET Framework 4.6.2:
Not applicable

Restart requirement

This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

Removal information

Click Control Panel, click System and Security under Windows Update, click View installed updates, and then select from the list of updates.

File information

See Microsoft Knowledge Base article 4014579
See Microsoft Knowledge Base article 4014599
See Microsoft Knowledge Base article 4014591
See Microsoft Knowledge Base article 4014588

Registry key verification

For Microsoft .NET Framework 3.5.1:
This update does not add a registry key to validate its installation. Use WMI to detect for the presence of this update.

For Microsoft .NET Framework 4.5.2:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework [.NET target version]\KB4014599
”ThisVersionInstalled” = “Y”

For Microsoft .NET Framework 4.6/4.6.1:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework 4.6\KB4014591
"ThisVersionInstalled" = "Y"

For Microsoft .NET 4.6.2:
This update does not add a registry key to validate its installation. Use WMI to detect this update.

Security update file name

For Microsoft .NET Framework 3.5 on Windows 8.1 for 32-bit Systems:
Windows8.1-KB4014581-x86.msu

For Microsoft .NET Framework 4.5.2 on Windows 8.1 for 32-bit Systems:
Windows8.1-KB4014595-x86.msu

For Microsoft .NET Framework 4.6/4.6.1 on Windows 8.1 for 32-bit Systems:
Windows8.1-KB4014590-x86.msu

For Microsoft .NET Framework 4.6.2 on Windows 8.1 for 32-bit Systems:
Windows8.1-KB4014587-x86.msu

For Microsoft .NET Framework 3.5 on Windows 8.1 for x64-based Systems:
Windows8.1-KB4014581-x64.msu

For Microsoft .NET Framework 4.5.2 on Windows 8.1 for x64-based Systems:
Windows8.1-KB4014595-x64.msu

For Microsoft .NET Framework 4.6/4.6.1 on Windows 8.1 for x64-based Systems:
Windows8.1-KB4014590-x64.msu

For Microsoft .NET Framework 4.6.2 on Windows 8.1 for x64-based Systems:
Windows8.1-KB4014587-x64.msu

Installation switches

See Microsoft Knowledge Base article 2844699

Restart requirement

This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services can't be stopped for any reason or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

Removal information

Click Control Panel, click System and Security under Windows Update, click View update history, and then select from the list of updates.

File information

See Microsoft Knowledge Base article 4014581
See Microsoft Knowledge Base article 4014595
See Microsoft Knowledge Base article 4014590
See Microsoft Knowledge Base article 4014587

Registry key verification

These updates do not add a registry key to validate their installation. Use WMI to detect for the presence of these updates.

Security update file name

For Microsoft .NET Framework 3.5 on Windows Server 2012:
Windows8-RT-KB4014577-x64.msu

For Microsoft .NET Framework 4.5.2 on Windows Server 2012:
Windows8-RT-KB4014597-x64.msu

For Microsoft .NET Framework 4.6/4.6.1 on Windows Server 2012:
Windows8-RT-KB4014589-x64.msu

For Microsoft .NET Framework 4.6.2 on Windows Server 2012:
Windows8-RT-KB4014586-x64.msu

For Microsoft .NET Framework 3.5 on Windows Server 2012 R2:
Windows8.1-KB4014581-x64.msu

For Microsoft .NET Framework 4.5.2 on Windows Server 2012 R2:
Windows8.1-KB4014595-x64.msu

For Microsoft .NET Framework 4.6/4.6.1 on Windows Server 2012 R2:
Windows8.1-KB4014590-x64.msu

For Microsoft .NET Framework 4.6.2 on Windows Server 2012 R2:
Windows8.1-KB4014587-x64.msu

Installation switches

See Microsoft Knowledge Base article 2844699

Restart requirement

This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services can't be stopped for any reason or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

Removal information

Click Control Panel, click System and Security under Windows Update, click View update history, and then select from the list of updates.

File information

See Microsoft Knowledge Base article 4014577
See Microsoft Knowledge Base article 4014597
See Microsoft Knowledge Base article 4014589
See Microsoft Knowledge Base article 4014586
See Microsoft Knowledge Base article 4014581
See Microsoft Knowledge Base article 4014595
See Microsoft Knowledge Base article 4014590
See Microsoft Knowledge Base article 4014587

Registry key verification

These updates do not add a registry key to validate their installation. Use WMI to detect for the presence of these updates.

Security update file names

For Microsoft .NET Framework 2.0 Service Pack 2 on Windows Server 2008 for 32-bit Systems Service Pack 2:
Windows6.0-KB4014502-x86.msu

For Microsoft .NET Framework 4.5.2 when installed on all supported 32-bit editions of Windows Server 2008 Service Pack 2:
NDP45-KB4014514-x86.exe

For Microsoft .NET Framework 4.6 when installed on all supported 32-bit editions of Windows Server 2008 Service Pack 2:
NDP46-KB4014511-x86.exe

For Microsoft .NET Framework 2.0 Service Pack 2 on Windows Server 2008 for x64-based Systems Service Pack 2:
Windows6.0-KB4014502-x64.msu

For Microsoft .NET Framework 4.5.2 on all supported x64-based editions of Windows Server 2008 Service Pack 2:
NDP45-KB4014514-x64.exe

For Microsoft .NET Framework 4.6 on all supported x64-based editions of Windows Server 2008 Service Pack 2:
NDP46-KB4014511-x64.exe

For Microsoft .NET Framework 2.0 Service Pack 2 on Windows Server 2008 for Itanium-based Systems Service Pack 2:
Windows6.0-KB4014502-ia64.msu

Installation switches

See Microsoft Knowledge Base article 2844699

Update log file

For Microsoft .NET Framework 2.0 Service Pack 2:
Not applicable

For Microsoft .NET Framework 4.5.2:
KB4014559_*_*-Microsoft .NET Framework [.NET target version]-MSP0.txt
KB4014559_*_*.html

For Microsoft .NET Framework 4.6:
KB4014553_*_*-Microsoft .NET Framework 4.6/4.6.1-MSP0.txt
KB4014553_*_*.html

Restart requirement

This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

Removal information

Click Control Panel, and then click Security. Under Windows Update, click View installed updates, and then select from the list of updates.

File information

See Microsoft Knowledge Base article 4014502
See Microsoft Knowledge Base article 4014514
See Microsoft Knowledge Base article 4014511

Registry key verification

For Microsoft .NET Framework 2.0 Service Pack 2 (4014205):
This update does not add a registry key to validate its installation. Use WMI to detect for the presence of this update.

For Microsoft .NET Framework 4.5.2:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework [.NET target version]\KB4014514
”ThisVersionInstalled” = “Y”

For Microsoft .NET Framework 4.6:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework 4.6\KB4014511
"ThisVersionInstalled" = "Y"

Security update file name

For Microsoft .NET Framework 3.5.1 on all supported 32-bit editions of Windows 7 Service Pack 1:
Windows6.1-KB4014504-x86.msu

For Microsoft .NET Framework 4.5.2 when installed on all supported 32-bit editions of Windows 7 Service Pack 1:
NDP45-KB4014514-x86.exe

For Microsoft .NET Framework 4.6/4.6.1 when installed on all supported 32-bit editions of Windows 7 Service Pack 1:
NDP46-KB4014511-x86.exe

For Microsoft .NET Framework 4.6.2 on all supported 32-bit editions of Windows 7 Service Pack 1:
NDP46-KB4014508-x86.exe

For Microsoft .NET Framework 3.5.1 on all supported x64-based editions of Windows 7 Service Pack 1:
Windows6.1-KB4014504-x64.msu

For Microsoft .NET Framework 4.5.2 when installed on all supported x64-based editions of Windows 7 Service Pack 1:
NDP45-KB4014514-x64.exe

For Microsoft .NET Framework 4.6/4.6.1 when installed on all supported x64-based editions of Windows 7 Service Pack 1:
NDP46-KB4014511-x64.exe

For Microsoft .NET Framework 4.6.2 on all supported x64-based editions of Windows 7 Service Pack 1:
NDP46-KB4014508-x64.exe

Installation switches

See Microsoft Knowledge Base article 2844699

Update log file

For Microsoft .NET Framework 3.5.1:
Not applicable

For Microsoft .NET Framework 4.5.2:
KB4014514_*_*-Microsoft .NET Framework [.NET target version]-MSP0.txt
KB4014514_*_*.html

For Microsoft .NET Framework 4.6/4.6.1:
KB4014511_*_*-Microsoft .NET Framework 4.6/4.6.1-MSP0.txt
KB4014511_*_*.html

For Microsoft .NET Framework 4.6.2:
Not applicable

Restart requirement

This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason or required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

Removal information

Click Control Panel, click System and Security under Windows Update, click View installed updates, and then select from the list of updates.

File information

See Microsoft Knowledge Base article 4014504
See Microsoft Knowledge Base article 4014514
See Microsoft Knowledge Base article 4014511
See Microsoft Knowledge Base article 4014508

Registry key verification

This update does not add a registry key to validate its installation. Use WMI to detect for the presence of this update.

For Microsoft .NET Framework 4.5.2:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework [.NET target version]\KB4014514
”ThisVersionInstalled” = “Y”

For Microsoft .NET Framework 4.6/4.6.1:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework 4.6\KB4014511
"ThisVersionInstalled" = "Y"

For Microsoft .NET 4.6.2:
This update does not add a registry key to validate its installation. Use WMI to detect this update.

Security update file name

For Microsoft .NET Framework 3.5.1 on all supported x64-based editions of Windows Server 2008 R2 Service Pack 1:
Windows6.1-KB4014504-x64.msu

For Microsoft .NET Framework 4.5.2 when installed on all supported x64-based editions of Windows Server 2008 R2 Service Pack 1:
NDP45-KB4014514-x64.exe

For Microsoft .NET Framework 4.6/4.6.1 when installed on all supported 32-bit editions of Windows 7 Service Pack 1:
NDP46-KB4014511-x64.exe

For Microsoft .NET Framework 4.6.2 on all supported x64-based editions of Windows Server 2008 R2 Service Pack 1:
NDP46-KB4014508-x64.exe

For Microsoft .NET Framework 3.5.1 on Windows Server 2008 R2 for Itanium-based Systems Service Pack 1:
Windows6.1-KB4014504-ia64.msu

Installation switches

See Microsoft Knowledge Base article 2844699

Update log file

For Microsoft .NET Framework 3.5.1:
Not applicable

For Microsoft .NET Framework 4.5.2:
KB4014514_*_*-Microsoft .NET Framework [.NET target version]-MSP0.txt
KB4014514_*_*.html

For Microsoft .NET Framework 4.6/4.6.1:
KB4014511_*_*-Microsoft .NET Framework 4.6/4.6.1-MSP0.txt
KB4014511_*_*.html

For Microsoft .NET Framework 4.6.2:
Not applicable

Restart requirement

This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason or required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

Removal information

Click Control Panel, click System and Security under Windows Update, click View installed updates, and then select from the list of updates.

File information

See Microsoft Knowledge Base article 4014504
See Microsoft Knowledge Base article 4014514
See Microsoft Knowledge Base article 4014511
See Microsoft Knowledge Base article 4014508

Registry key verification

This update does not add a registry key to validate its installation. Use WMI to detect for the presence of this update.

For Microsoft .NET Framework 4.5.2:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework [.NET target version]\KB4014514
”ThisVersionInstalled” = “Y”

For Microsoft .NET Framework 4.6/4.6.1:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework 4.6\KB4014511
"ThisVersionInstalled" = "Y"

For Microsoft .NET 4.6.2:
This update does not add a registry key to validate its installation. Use WMI to detect this update.

Security update file name

For Microsoft .NET Framework 3.5 on Windows 8.1 for 32-bit Systems:
Windows8.1-KB4014505-x86.msu

For Microsoft .NET Framework 4.5.2 on Windows 8.1 for 32-bit Systems:
Windows8.1-KB4014512-x86.msu

For Microsoft .NET Framework 4.6/4.6.1 on Windows 8.1 for 32-bit Systems:
Windows8.1-KB4014510-x86.msu

For Microsoft .NET Framework 4.6.2 on Windows 8.1 for 32-bit Systems:
Windows8.1-KB4014507-x86.msu

For Microsoft .NET Framework 3.5 on Windows 8.1 for x64-based Systems:
Windows8.1-KB4014505-x64.msu

For Microsoft .NET Framework 4.5.2 on Windows 8.1 for x64-based Systems:
Windows8.1-KB4014512-x64.msu

For Microsoft .NET Framework 4.6/4.6.1 on Windows 8.1 for x64-based Systems:
Windows8.1-KB4014510-x64.msu

For Microsoft .NET Framework 4.6.2 on Windows 8.1 for x64-based Systems:
Windows8.1-KB4014507-x64.msu

Installation switches

See Microsoft Knowledge Base article 2844699

Restart requirement

This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason or required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

Removal information

Click Control Panel, click System and Security under Windows Update, click View update history, and then select from the list of updates.

File information

See Microsoft Knowledge Base article 4014505
See Microsoft Knowledge Base article 4014512
See Microsoft Knowledge Base article 4014510
See Microsoft Knowledge Base article 4014507

Registry key verification

These updates do not add a registry key to validate their installation. Use WMI to detect for the presence of these updates.

Security update file name

For Microsoft .NET Framework 3.5 on Windows Server 2012:
Windows8-RT-KB4014503-x64.msu

For Microsoft .NET Framework 4.5.2 on Windows Server 2012:
Windows8-RT-KB4014513-x64.msu

For Microsoft .NET Framework 4.6/4.6.1 on Windows Server 2012:
Windows8-RT-KB4014509-x64.msu

For Microsoft .NET Framework 4.6.2 on Windows Server 2012:
Windows8-RT-KB4014506-x64.msu

For Microsoft .NET Framework 3.5 on Windows Server 2012 R2:
Windows8.1-KB4014505-x64.msu

For Microsoft .NET Framework 4.5.2 on Windows Server 2012 R2:
Windows8.1-KB4014512-x64.msu

For Microsoft .NET Framework 4.6/4.6.1 on Windows Server 2012 R2:
Windows8.1-KB4014510-x64.msu

For Microsoft .NET Framework 4.6.2 on Windows Server 2012 R2:
Windows8.1-KB4014507-x64.msu

Installation switches

See Microsoft Knowledge Base article 2844699

Restart requirement

This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services can't be stopped for any reason or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

Removal information

Click Control Panel, click System and Security under Windows Update, click View update history, and then select from the list of updates.

File information

See Microsoft Knowledge Base article 4014503
See Microsoft Knowledge Base article 4014513
See Microsoft Knowledge Base article 4014509
See Microsoft Knowledge Base article 4014506
See Microsoft Knowledge Base article 4014505
See Microsoft Knowledge Base article 4014512
See Microsoft Knowledge Base article 4014510
See Microsoft Knowledge Base article 4014507

Registry key verification

These updates do not add a registry key to validate their installation. Use WMI to detect for the presence of these updates.

Deployment

The 4014512 update is available via Windows Update only.
The 4014510 update is available via Windows Update only.
The 4014507 update is available via Windows Update only.

Restart Requirement

You must restart the system after applying this security update.

Removal Information

See Microsoft Knowledge Base article 4014512
See Microsoft Knowledge Base article 4014510
See Microsoft Knowledge Base article 4014507

File Information

See the individual Knowledge Base articles that are listed in the “Additional information about this security update” section.

Security update file name

For Microsoft .NET Framework 3.5 on all supported editions of Windows 10 for 32-bit Systems:
Windows10.0-KB4019474-x86.msu

For Microsoft .NET Framework 3.5 on all supported editions of Windows 10 for x64-based Systems:
Windows10.0-KB4019474-x64.msu

For Microsoft .NET Framework 4.6 on all supported editions of Windows 10 for 32-bit Systems:
Windows10.0-KB4019474-x86.msu

For Microsoft .NET Framework 4.6 on all supported editions of Windows 10 for x64-based Systems:
Windows10.0 KB4019474-x64.msu

For Microsoft .NET Framework 3.5 on all supported 32-bit editions of Windows 10 version 1511:
Windows10.0-KB4019473-x86.msu

For Microsoft .NET Framework 3.5 on all supported x64-based editions of Windows 10 Version 1511:
Windows10.0-KB4019473-x64.msu

For Microsoft .NET Framework 4.6 on all supported 32-bit editions of Windows 10 version 1511:
Windows10.0-KB4019473-x86.msu

For Microsoft .NET Framework 4.6 on all supported x64-based editions of Windows 10 Version 1511:
Windows10.0-KB4019473-x64.msu

For Microsoft .NET Framework 3.5 on all supported 32-bit editions of Windows 10 version 1607:
Windows10.0-KB4019472-x86.msu

For Microsoft .NET Framework 3.5 on all supported x64-based editions of Windows 10 Version 1607:
Windows10.0-KB4019472-x64.msu

For Microsoft .NET Framework 4.6 on all supported 32-bit editions of Windows 10 version 1607:
Windows10.0-KB4019472-x86.msu

For Microsoft .NET Framework 4.6 on all supported x64-based editions of Windows 10 Version 1607:
Windows10.0-KB4019472-x64.msu

For Microsoft .NET Framework 3.5 on all supported 32-bit editions of Windows 10 version 1703:
Windows10.0-KB4016871-x86.msu

For Microsoft .NET Framework 3.5 on all supported x64-based editions of Windows 10 Version 1703:
Windows10.0-KB4016871-x86.msu

For Microsoft .NET Framework 4.6 on all supported 32-bit editions of Windows 10 version 1703:
Windows10.0-KB4016871-x86.msu

For Microsoft .NET Framework 4.6 on all supported x64-based editions of Windows 10 Version 1703:
Windows10.0-KB4016871-x64.msu

Installation switches

For Microsoft .NET Framework, see Microsoft Knowledge Base article 2844699

Restart requirement

Yes, you must restart your system after you apply this security update.

Removal information

To uninstall an update that is installed by WUSA, use the /Uninstall setup switch or click Control Panel, click System and Security under Windows Update, click View installed updates, and then select from the list of updates.

File information

See Microsoft Knowledge Base article 4019474
See Microsoft Knowledge Base article 4019473
See Microsoft Knowledge Base article 4019472
See Microsoft Knowledge Base article 4016871

Registry key verification

These updates do not add a registry key to validate their installation.

Security update file name

For Microsoft .NET Framework 3.5 on Windows Server 2016:
Windows10.0-KB4016871-x64.msu

For Microsoft .NET Framework 4.6.2 on Windows Server 2016:
Windows10.0-KB4016871-x64.msu

Installation switches

For Microsoft .NET Framework, see Microsoft Knowledge Base article 2844699

Restart requirement

Yes, you must restart your system after you apply this security update.

Removal information

To uninstall an update that is installed by WUSA, use the /Uninstall setup switch or click Control Panel, click System and Security under Windows Update, click View installed updates, and then select from the list of updates.

File information

See Microsoft Knowledge Base article 4016871

Registry key verification

These updates do not add a registry key to validate their installation.