Security update deployment information: January 9, 2018


January Release Main Support Package Deployment Tables


Microsoft Windows deployment tables

Windows Server 2008 (all editions)

Reference table

The following table contains the security update information for this software.

Security update file names

For all supported 32-bit editions of Windows Server 2008:
Windows6.0-KB4056942-x86.msu

 

For all supported x64-based editions of Windows Server 2008:
Windows6.0-KB4056942-x64.msu

 

For all supported Itanium-based editions of Windows Server 2008:
Windows6.0-KB4056942-ia64.msu

Installation switches

See Microsoft Knowledge Base Article 934307.

Restart requirement

You must restart the system after you apply this security update.

Removal information

WUSA.exe does not support uninstalling updates. To uninstall an update that was installed by WUSA, select Control Panel, and then select Security. Under "Windows Update," select View installed updates, and then select from the list of updates.

File information

See Microsoft Knowledge Base Article 4056942.

Registry key verification

Note This update does not add a registry key to validate its installation.

 

Internet Explorer deployment tables

Internet Explorer 9, Internet Explorer 10, and Internet Explorer 11 installed on Windows (all editions)

Reference table

The following table contains the security update information for this software.

Security update file names

For Internet Explorer 9 in all supported 32-bit editions of Windows Server 2008:
IE9-Windows6.0-KB4056568-x86.msu

 

For Internet Explorer 9 in all supported x64-based Systems Service Pack 2 of Windows Server 2008:
IE9-Windows6.0-KB4056568-x64.msu

 

For Internet Explorer 10 in all supported editions of Windows Server 2012:
Windows8-RT-KB4056568-x86.msu

 

For Internet Explorer 11 in Windows 7 for 32-bit Systems Service Pack 1:
IE11-Windows6.1-KB4056568-x86.msu

 

For Internet Explorer 11 in Windows 7 for x64-based Systems Service Pack 1:
IE11-Windows6.1-KB4056568-x64.msu

 

For Internet Explorer 11 in Windows Server 2008 R2 for x64-based Systems Service Pack 1:
IE11-Windows6.1-KB4056568-x64.msu

 

For Internet Explorer 11 in all supported 32-bit editions of Windows 8.1:
Windows8.1-KB4056568-x86.msu

 

For Internet Explorer 11 in all supported x64-based editions of Windows 8.1:
Windows8.1-KB4056568-x64.msu

 

For Internet Explorer 11 in all supported editions of Windows Server 2012 R2:
Windows8.1-KB4056568-x64.msu

Installation switches

See Microsoft Knowledge Base Article 934307.

Restart requirement

You must restart the system after you apply this security update.

Removal information

WUSA.exe does not support uninstalling updates. To uninstall an update that was installed by WUSA, select Control Panel, and then select Security. Under "Windows Update," select View installed updates, and then select from the list of updates.

File information

See Microsoft Knowledge Base Article 4056568.

Registry key verification

Note This update does not add a registry key to validate its installation.

 

Microsoft Office deployment tables

Microsoft Office 2007 (all editions) and other software

Reference table

The following table contains the security update information for this software.

Security update file name

For Microsoft Office 2007 Service Pack 3:
mso2007-kb4011201-fullfile-x86-glb.exe
eqnedt322007-kb4011656-fullfile-x86-en-us.exe

 

For Microsoft Excel 2007 Service Pack 3:
excel2007-kb4011602-fullfile-x86-glb.exe

 

For Microsoft Excel Viewer 2007 Service Pack 3:
xlview2007-kb4011606-fullfile-x86-glb.exe

 

For Microsoft Outlook 2007 Service Pack 3:
outlook2007-kb4011213-fullfile-x86-glb.exe

 

For Microsoft Office Compatibility Pack Service Pack 3
xlconv2007-kb4011605-fullfile-x86-glb.exe
wordconv2007-kb4011607-fullfile-x86-glb.exe

 

For Microsoft Word 2007 Service Pack 3:
word2007-kb4011657-fullfile-x86-glb.exe

 

For Microsoft Word Viewer:
office-kb4011641-fullfile-enu.exe

Installation switches

See Microsoft Knowledge Base Article 912203

Restart requirement

In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

To help reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base Article 887012.

Removal information

Use the Add or Remove Programs item in Control Panel.

File information

See Microsoft Knowledge Base Article 4011201
See Microsoft Knowledge Base Article 4011213
See Microsoft Knowledge Base Article 4011602
See Microsoft Knowledge Base Article 4011605
See Microsoft Knowledge Base Article 4011606
See Microsoft Knowledge Base Article 4011607
See Microsoft Knowledge Base Article 4011641
See Microsoft Knowledge Base Article 4011656
See Microsoft Knowledge Base Article 4011657

Registry key verification

Not applicable.

 

Microsoft Office 2010 (all editions)

Reference table

The following table contains the security update information for this software.

Security update file name

For Microsoft Office 2010 Service Pack 2 (32-bit editions):
kb24286772010-kb4011658-fullfile-x86-glb.exe
eqnedt322010-kb4011610-fullfile-x86-en-us.exe
mso2010-kb4011611-fullfile-x86-glb.exe

 

For Microsoft Office 2010 Service Pack 2 (64-bit editions):
kb24286772010-kb4011658-fullfile-x64-glb.exe
eqnedt322010-kb4011610-fullfile-x64-en-us.exe
mso2010-kb4011611-fullfile-x64-glb.exe

 

For Microsoft Excel 2010 Service Pack 2 (32-bit editions):
excel2010-kb4011660-fullfile-x86-glb.exe

 

For Microsoft Excel 2010 Service Pack 2 (64-bit editions):
excel2010-kb4011660-fullfile-x64-glb.exe

 

For Microsoft Outlook 2010 Service Pack 2 (32-bit editions)
outlookloc2010-kb4011273-fullfile-x86-glb.exe

 

For Microsoft Outlook 2010 Service Pack 2 (64-bit editions):
outlookloc2010-kb4011273-fullfile-x64-glb.exe

 

For Microsoft Word 2010 Service Pack 2 (32-bit editions):
word2010-kb4011659-fullfile-x86-glb.exe

 

For Microsoft Word 2010 Service Pack 2 (64-bit editions):
word2010-kb4011659-fullfile-x64-glb.exe

Installation switches

See Microsoft Knowledge Base Article 912203.

Restart requirement

In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.
To help reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base Article 887012.

Removal information

Use the Add or Remove Programs item in Control Panel.

File information

See Microsoft Knowledge Base Article 4011273.
See Microsoft Knowledge Base Article 4011658.
See Microsoft Knowledge Base Article 4011610.
See Microsoft Knowledge Base Article 4011611.
See Microsoft Knowledge Base Article 4011659.
See Microsoft Knowledge Base Article 4011660.

Registry key verification

Not applicable.

 

Microsoft Office 2013 (all editions)

Reference table

The following table contains the security update information for this software.

Security update file name

For Microsoft Office 2013 Service Pack 1 (32-bit editions):
eqnedt322013-kb4011580-fullfile-x86-glb.exe
mso2013-kb4011636-fullfile-x86-glb.exe

 

For Microsoft Office 2013 Service Pack 1 (64-bit editions):
eqnedt322013-kb4011580-fullfile-x64-glb.exe
mso2013-kb4011636-fullfile-x64-glb.exe

 

For Microsoft Outlook 2013 (32-bit editions):
outlook2013-kb4011637-fullfile-x86-glb.exe

 

For Microsoft Outlook 2013 (64-bit editions):
outlook2013-kb4011637-fullfile-x64-glb.exe

 

For Microsoft Excel 2013 Service Pack 1 (32-bit editions)
excel2013-kb4011639-fullfile-x86-glb.exe

 

For Microsoft Excel 2013 Service Pack 1 (64-bit editions)
excel2013-kb4011639-fullfile-x64-glb.exe

 

For Microsoft Word 2013 Service Pack 1 (32-bit editions)
word2013-kb4011651-fullfile-x86-glb.exe

 

For Microsoft Word 2013 Service Pack 1 (64-bit editions)
word2013-kb4011651-fullfile-x64-glb.exe

Installation switches

See Microsoft Knowledge Base Article 912203.

Restart requirement

In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

To help reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base Article 887012.

Removal information

Use the Add or Remove Programs item in Control Panel.

File information

See Microsoft Knowledge Base Article 4011580.
See Microsoft Knowledge Base Article 4011636.
See Microsoft Knowledge Base Article 4011637.
See Microsoft Knowledge Base Article 4011639.
See Microsoft Knowledge Base Article 4011651.

Registry key verification

Not applicable.

 

Microsoft Office 2013 RT (all editions)

Deployment

The 4011636 update for Microsoft Office 2013 RT is available via Windows Update.
The 4011639 update for Microsoft Excel 2013 RT is available via Windows Update.
The 4011637 update for Microsoft Outlook 2013 RT is available via Windows Update.
The 4011651 update for Microsoft Word 2013 RT is available via Windows Update.

Restart requirement

In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

To help reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base Article 887012.

Removal information

Select Control Panel, and then select Security. Under "Windows Update," select View installed updates, and then select from the list of updates.

File information

See Microsoft Knowledge Base Article 4011636.
See Microsoft Knowledge Base Article 4011637.
See Microsoft Knowledge Base Article 4011639.
See Microsoft Knowledge Base Article 4011651.

 

Microsoft Office 2016 (all editions)

Reference table

The following table contains the security update information for this software.

Security update file name

For Microsoft Office 2016 (32-bit edition):
eqnedt322016-kb4011574-fullfile-x86-glb.exe
msodll99l2016-kb4011622-fullfile-x86-glb.exe
mso2016-kb4011632-fullfile-x86-glb.exe

 

For Microsoft Office 2016 (64-bit edition):
eqnedt322016-kb4011574-fullfile-x64-glb.exe
msodll99l2016-kb4011622-fullfile-x64-glb.exe
mso2016-kb4011632-fullfile-x64-glb.exe

 

For Microsoft Excel 2016 (32-bit edition):
excel2016-kb4011627-fullfile-x86-glb.exe

 

For Microsoft Excel 2016 (64-bit edition):
excel2016-kb4011627-fullfile-x64-glb.exe

 

For Microsoft Outlook 2016 (32-bit edition):
outlook2016-kb4011626-fullfile-x86-glb.exe

 

For Microsoft Outlook 2016 (64-bit edition):
outlook2016-kb4011626-fullfile-x64-glb.exe

 

For Microsoft Word 2016 (32-bit edition):
word2016-kb4011643-fullfile-x86-glb.exe

 

For Microsoft Word 2016 (64-bit edition):
word2016-kb4011643-fullfile-x64-glb.exe

Installation switches

See Microsoft Knowledge Base Article 912203.

Restart requirement

In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

To help reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base Article 887012.

Removal information

Use the Add or Remove Programs item in Control Panel.

File information

See Microsoft Knowledge Base Article 4011574.
See Microsoft Knowledge Base Article 4011622.
See Microsoft Knowledge Base Article 4011626.
See Microsoft Knowledge Base Article 4011627.
See Microsoft Knowledge Base Article 4011632.
See Microsoft Knowledge Base Article 4011643.

Registry key verification

Not applicable.

 

Microsoft SharePoint Server 2010 (all editions)

Reference table

The following table contains the security update information for this software.

Security update file name

For Microsoft SharePoint Server 2010 Service Pack 2:
coreserver2010-kb3114998-fullfile-x64-glb.exe
wdsrv2010-kb4011609-fullfile-x64-glb.exe

 

For Microsoft SharePoint Foundation 2010 Service Pack 2:
wssloc2010-kb3141547-fullfile-x64-glb.exe

Installation switches

See Microsoft Knowledge Base Article 912203.

Restart requirement

After you install this security update on all SharePoint servers, you must run the PSconfig tool to complete the installation process.

You may have to restart the computer after you install this security update. In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message is displayed that advises you to restart the computer.

To help reduce the possibility that a restart will be required, stop all affected services and close all applications that may use the affected files before you install this security update.

For more information, see Why you may be prompted to restart your computer after you install a security update on a Windows-based computer.

Removal information

This security update cannot be removed.

File Information

See Microsoft Knowledge Base Article 3114998.
See Microsoft Knowledge Base Article 3141547.
See Microsoft Knowledge Base Article 4011609.

Registry key verification

Not applicable.

 

Microsoft SharePoint Server 2013 (all editions)

Reference table

The following table contains the security update information for this software.

Security update file name

For Microsoft SharePoint Enterprise Server 2013 Service Pack 1:
wdsrvloc2013-kb4011579-fullfile-x64-glb.exe
acsrvloc2013-kb4011599-fullfile-x64-glb.exe

 

For Microsoft SharePoint Foundation 2013 Service Pack 1
sts2013-kb4011653-fullfile-x64-glb.exe

Installation switches

See Microsoft Knowledge Base Article 912203.

Restart requirement

In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

To help reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base Article 887012.

Removal information

This security update cannot be removed.

File Information

See Microsoft Knowledge Base Article 4011579.
See Microsoft Knowledge Base Article 4011599.
See Microsoft Knowledge Base Article 4011653.

Registry key verification

Not applicable.

 

Microsoft SharePoint Server 2016 (all editions)

Reference table

The following table contains the security update information for this software.

Security update file name

For Microsoft SharePoint Enterprise Server 2016:
sts2016-kb4011642-fullfile-x64-glb.exe

Installation switches

See Microsoft Knowledge Base Article 912203.

Restart requirement

After you install this security update on all SharePoint servers, you must run the PSconfig tool to complete the installation process.

You may have to restart the computer after you install this security update. In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message is displayed that advises you to restart the computer.

To help reduce the possibility that a restart will be required, stop all affected services and close all applications that may use the affected files before you install this security update.
For more information, see Why you may be prompted to restart your computer after you install a security update on a Windows-based computer.

Removal information

This security update cannot be removed.

File Information

See Microsoft Knowledge Base Article 4011642.

Registry key verification

Not applicable.

 

Microsoft Office Web Apps 2010 (all versions)

Reference table

The following table contains the security update information for this software.

Security update file name

For Microsoft Office Web Apps 2010 Service Pack 2:
wac2010-kb4011615-fullfile-x64-glb.exe

Installation switches

See Microsoft Knowledge Base Article 912203.

Restart requirement

In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

To help reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base Article 887012.

Removal information

This security update cannot be removed.

File Information

See Microsoft Knowledge Base Article 4011615.

Registry key verification

Not applicable.

 

Microsoft Office Web Apps 2013 (all versions)

Reference table

The following table contains the security update information for this software.

Security update file name

For all supported editions of Microsoft Office Web Apps Server 2013 Service Pack 1:
wacserver2013-kb4011648-fullfile-x64-glb.exe

Installation switches

See Microsoft Knowledge Base Article 912203.

Restart requirement

In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

To help reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about why you may be prompted to restart, see Microsoft Knowledge Base Article 887012.

Removal information

This security update cannot be removed.

File Information

See Microsoft Knowledge Base Article 4011648.

Registry key verification

Not applicable.

 

Office Online Server

Reference table

The following table contains the security update information for this software.

Security update file name

For all supported editions of Office Online Server:
wacserver2016-kb4011021-fullfile-x64-glb.exe

Installation switches

See Microsoft Knowledge Base Article 912203.

Restart requirement

In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

To help reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about why you may be prompted to restart, see Microsoft Knowledge Base Article 887012.

Removal information

This security update cannot be removed.

File Information

See Microsoft Knowledge Base Article 4011021.

Registry key verification

Not applicable.

.NET Deployment tables – security-only release

Windows Server 2008 (all editions)

Reference table

The following table contains the security update information for .NET Framework installations running on all supported versions of Windows Server 2008 Service Pack 2 for the security-only release.

Security update file names

For Microsoft .NET Framework 2.0 Service Pack 2 on Windows Server 2008 for 32-bit Systems Service Pack 2:
Windows6.0-KB4054174-x86.msu

 

For Microsoft .NET Framework 4.5.2 when installed on all supported 32-bit editions of Windows Server 2008 Service Pack 2:
NDP45-KB4054172-x86.exe

 

For Microsoft .NET Framework 4.6/4.6.2/4.7 when installed on all supported 32-bit editions of Windows Server 2008 Service Pack 2:
NDP46-KB4054183-x86.exe

 

For Microsoft .NET Framework 2.0 Service Pack 2 on Windows Server 2008 for x64-based Systems Service Pack 2:
Windows6.0-KB4054174-x64.msu

 

For Microsoft .NET Framework 4.5.2 on all supported x64-based editions of Windows Server 2008 Service Pack 2:
NDP46-KB4054172-x64.exe

 

For Microsoft .NET Framework 4.6/4.6.2/4.7 on all supported x64-based editions of Windows Server 2008 Service Pack 2:
NDP46-KB4054183-x64.exe

 

For Microsoft .NET Framework 2.0 Service Pack 2 on Windows Server 2008 for Itanium-based Systems Service Pack 2:
Windows6.0-KB4054174-ia64.msu

Installation switches

See Microsoft Knowledge Base Article 2844699.

Update log file

For Microsoft .NET Framework 2.0 Service Pack 2:
Not applicable.

 

For Microsoft .NET Framework 4.5.2:
KB4054172_*_*-Microsoft .NET Framework [.NET target version]-MSP0.txt
KB4054172_*_*.html

 

For Microsoft .NET Framework 4.6/4.6.2/4.7:
KB4054183_*_*-Microsoft .NET Framework 4.6-MSP0.txt
KB4054183_*_*.html

Restart requirement

This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

Removal information

Select Control Panel, and then select Security. Under "Windows Update," select View installed updates, and then select from the list of updates.

File information

See Microsoft Knowledge Base Article 4054174.
See Microsoft Knowledge Base Article 4054172.
See Microsoft Knowledge Base Article 4054183.

Registry key verification

For Microsoft .NET Framework 2.0 Service Pack 2 (4054174):
This update does not add a registry key to validate its installation. Use WMI to detect for the presence of this update.

 

For Microsoft .NET Framework 4.5.2:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework [.NET target version]\KB4054172
”ThisVersionInstalled” = “Y”

 

For Microsoft .NET Framework 4.6/4.6.2/4.7:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework 4.6\KB4054183
"ThisVersionInstalled" = "Y"

 

Windows 7 Service Pack 1 (.NET Framework installations)

Reference table

The following table contains the security update information for .NET Framework installations that are running on all supported versions of Windows 7 Service Pack 1 for the security-only release.

Security update file name

For Microsoft .NET Framework 3.5.1 on all supported 32-bit editions of Windows 7 Service Pack 1:
Windows6.1-KB4054176-x86.msu

 

For Microsoft .NET Framework 4.5.2 when installed on all supported 32-bit editions of Windows 7 Service Pack 1:
NDP45-KB4054172-x86.exe

 

For Microsoft .NET Framework 4.6/4.6.1/4.6.2/4.7/4.7.1 when installed on all supported 32-bit editions of Windows 7 Service Pack 1:
NDP46-KB4054183-x86.exe

 

For Microsoft .NET Framework 3.5.1 on all supported x64-based editions of Windows 7 Service Pack 1:
Windows6.1-KB4054176-x64.msu

 

For Microsoft .NET Framework 4.5.2 when installed on all supported x64-based editions of Windows 7 Service Pack 1:
NDP45-KB4054172-x64.exe

 

For Microsoft .NET Framework 4.6/4.6.1/4.6.2/4.7/4.7.1 when installed on all supported x64-based editions of Windows 7 Service Pack 1:
NDP46-KB4054183-x64.exe

Installation switches

See Microsoft Knowledge Base Article 2844699.

Update log file

For Microsoft .NET Framework 3.5.1:
Not applicable.

 

For Microsoft .NET Framework 4.5.2:
KB4054172_*_*-Microsoft .NET Framework [.NET target version]-MSP0.txt
KB4054172_*_*.html

 

For Microsoft .NET Framework 4.6/4.6.1:
KB4054183_*_*-Microsoft .NET Framework 4.6/4.6.1-MSP0.txt
KB4054183_*_*.html

 

For Microsoft .NET Framework 4.6.2:
Not applicable.

Restart requirement

This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

Removal information

Select Control Panel, and then select Security. Under "Windows Update," select View installed updates, and then select from the list of updates.

File information

See Microsoft Knowledge Base Article 4054176.
See Microsoft Knowledge Base Article 4054172.
See Microsoft Knowledge Base Article 4054183.

Registry key verification

For Microsoft .NET Framework 3.5.1:
This update does not add a registry key to validate its installation. Use WMI to detect for the presence of this update.

 

For Microsoft .NET Framework 4.5.2:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework [.NET target version]\KB4054172
”ThisVersionInstalled” = “Y”

 

For Microsoft .NET Framework 4.6/4.6.1:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework 4.6\KB4054183
"ThisVersionInstalled" = "Y"

 

For Microsoft .NET 4.6.2:
This update does not add a registry key to validate its installation. Use WMI to detect this update.

 

Windows Server 2008 R2 (.NET Framework Installations)

Reference table

The following table contains the security update information for .NET Framework installations running on all supported versions of Windows Server 2008 R2 for the Security Only Release.

Security update file name

For Microsoft .NET Framework 3.5.1 on all supported x64-based editions of Windows Server 2008 R2 Service Pack 1:
Windows6.1-KB4054176-x64.msu

 

For Microsoft .NET Framework 4.5.2 when installed on all supported x64-based editions of Windows Server 2008 R2 Service Pack 1:
NDP45-KB4054172-x86.exe

 

For Microsoft .NET Framework 4.6/4.6.1/4.6.2/4.7/4.7.1 when installed on all supported 32-bit editions of Windows Server 2008 R2 Service Pack 1:
NDP46-KB4054183-x86.exe

 

For Microsoft .NET Framework 3.5.1 on Windows Server 2008 R2 for Itanium-based Systems Service Pack 1:
Windows6.1-KB4054176-ia64.msu

Installation switches

See Microsoft Knowledge Base Article 2844699.

Update log file

For Microsoft .NET Framework 3.5.1:
Not applicable.

 

For Microsoft .NET Framework 4.5.2:
KB4054172_*_*-Microsoft .NET Framework [.NET target version]-MSP0.txt
KB4054172_*_*.html

 

For Microsoft .NET Framework 4.6/4.6.1:
KB4054183_*_*-Microsoft .NET Framework 4.6/4.6.1-MSP0.txt
KB4054183_*_*.html

 

For Microsoft .NET Framework 4.6.2:
Not applicable.

Restart requirement

This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

Removal information

Select Control Panel, and then select Security. Under "Windows Update," select View installed updates, and then select from the list of updates.

File information

See Microsoft Knowledge Base Article 4054176.
See Microsoft Knowledge Base Article 4054172.
See Microsoft Knowledge Base Article 4054183.

Registry key verification

For Microsoft .NET Framework 3.5.1:
This update does not add a registry key to validate its installation. Use WMI to detect for the presence of this update.

 

For Microsoft .NET Framework 4.5.2:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework [.NET target version]\KB4054172
”ThisVersionInstalled” = “Y”

 

For Microsoft .NET Framework 4.6/4.6.1:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework 4.6\KB4054183
"ThisVersionInstalled" = "Y"

 

For Microsoft .NET 4.6.2:
This update does not add a registry key to validate its installation. Use WMI to detect this update.

 

Windows 8.1 (.NET Framework installations)

Reference table

The following table contains the security update information for .NET Framework installations that are running on all supported versions of Windows 8.1 for the security-only release.

Security update file name

For Microsoft .NET Framework 3.5 on Windows 8.1 for 32-bit Systems:
Windows8.1-KB4054177-x86.msu

 

For Microsoft .NET Framework 4.5.2 on Windows 8.1 for 32-bit Systems:
Windows8.1-KB4054170-x86.msu

 

For Microsoft .NET Framework 4.6/4.6.1/4.6.2/4.7/4.7.1 on Windows 8.1 for 32-bit Systems:
Windows8.1-KB4054182-x86.msu

 

For Microsoft .NET Framework 3.5 on Windows 8.1 for x64-based Systems:
Windows8.1-KB4054177-x64.msu

 

For Microsoft .NET Framework 4.5.2 on Windows 8.1 for x64-based Systems:
Windows8.1-KB4054170-x64.msu

 

For Microsoft .NET Framework 4.6/4.6.1/4.6.2/4.7/4.7.1 on Windows 8.1 for x64-based Systems:
Windows8.1-KB4054182-x64.msu

Installation switches

See Microsoft Knowledge Base Article 2844699.

Restart requirement

This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

Removal information

Select Control Panel, and then select Security. Under "Windows Update," select View installed updates, and then select from the list of updates.

File information

See Microsoft Knowledge Base Article 4054177.
See Microsoft Knowledge Base Article 4054170.
See Microsoft Knowledge Base Article 4054182.

Registry key verification

These updates do not add a registry key to validate their installation. Use WMI to detect for the presence of these updates.

 

Windows Server 2012 and Windows Server 2012 R2 (.NET Framework installations)

Reference table

The following table contains the security update information for .NET Framework installations that are running on all supported versions of Windows Server 2012 and Windows Server 2012 R2 for the security-only release.

Security update file name

For Microsoft .NET Framework 3.5 on Windows Server 2012:
Windows8-RT-KB4054175-x64.msu

 

For Microsoft .NET Framework 4.5.2 on Windows Server 2012:
Windows8-RT-KB4054171-x64.msu

 

For Microsoft .NET Framework 4.6/4.6.1/4.6.2/4.7/4.7.1 on Windows Server 2012:
Windows8-RT-KB4054181-x64.msu

 

For Microsoft .NET Framework 3.5 on Windows Server 2012 R2:
Windows8.1-KB4054177-x64.msu

 

For Microsoft .NET Framework 4.5.2 on Windows Server 2012 R2:
Windows8.1-KB4054170-x64.msu

 

For Microsoft .NET Framework 4.6/4.6.1/4.6.2/4.7/4.7.1 on Windows Server 2012 R2:
Windows8.1-KB4054182-x64.msu

Installation switches

See Microsoft Knowledge Base Article 2844699.

Restart requirement

This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

Removal information

Select Control Panel, and then select Security. Under "Windows Update," select View installed updates, and then select from the list of updates.

File information

See Microsoft Knowledge Base Article 4054175.
See Microsoft Knowledge Base Article 4054171.
See Microsoft Knowledge Base Article 4054181.
See Microsoft Knowledge Base Article 4054177.
See Microsoft Knowledge Base Article 4054170.
See Microsoft Knowledge Base Article 4054182.

Registry key verification

These updates do not add a registry key to validate their installation. Use WMI to detect for the presence of these updates.

 

.NET Deployment tables – Monthly Rollup

Windows Server 2008 (all editions)

Reference table

The following table contains the security update information for .NET Framework installations that are running on all supported versions of Windows Server 2008 Service Pack 2 for the monthly rollup.

Security update file names

For Microsoft .NET Framework 2.0 Service Pack 2 on Windows Server 2008 for 32-bit Systems Service Pack 2:
Windows6.0-KB4054996-x86.msu

 

For Microsoft .NET Framework 4.5.2 when installed on all supported 32-bit editions of Windows Server 2008 Service Pack 2:
NDP45-KB4054995-x86.exe

 

For Microsoft .NET Framework 4.6/4.6.1/4.6.2/4.7/4.7.1 when installed on all supported 32-bit editions of Windows Server 2008 Service Pack 2:
NDP46-KB4055002-x86.exe

 

For Microsoft .NET Framework 2.0 Service Pack 2 on Windows Server 2008 for x64-based Systems Service Pack 2:
Windows6.0-KB4054996-x64.msu

 

For Microsoft .NET Framework 4.5.2 on all supported x64-based editions of Windows Server 2008 Service Pack 2:
NDP45-KB4054995-x64.exe

 

For Microsoft .NET Framework 4.6/4.6.1/4.6.2/4.7/4.7.1 on all supported x64-based editions of Windows Server 2008 Service Pack 2:
NDP46-KB4055002-x64.exe

 

For Microsoft .NET Framework 2.0 Service Pack 2 on Windows Server 2008 for Itanium-based Systems Service Pack 2:
Windows6.0-KB4054996-ia64.msu

Installation switches

See Microsoft Knowledge Base Article 2844699

Update log file

For Microsoft .NET Framework 2.0 Service Pack 2:
Not applicable.

 

For Microsoft .NET Framework 4.5.2:
KB4054995_*_*-Microsoft .NET Framework [.NET target version]-MSP0.txt
KB4054995_*_*.html

 

For Microsoft .NET Framework 4.6/4.6.1/4.6.2/4.7/4.7.1:
KB4055002_*_*-Microsoft .NET Framework 4.6/4.6.1-MSP0.txt
KB4055002_*_*.html

Restart requirement

This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

Removal information

Select Control Panel, and then select Security. Under "Windows Update," select View installed updates, and then select from the list of updates.

File information

See Microsoft Knowledge Base Article 4054995.
See Microsoft Knowledge Base Article 4054996.
See Microsoft Knowledge Base Article 4055002.

Registry key verification

For Microsoft .NET Framework 2.0 Service Pack 2 (4054996):
This update does not add a registry key to validate its installation. Use WMI to detect for the presence of this update.

 

For Microsoft .NET Framework 4.5.2:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework [.NET target version]\ KB4054995
”ThisVersionInstalled” = “Y”

 

For Microsoft .NET Framework 4.6/4.6.1/4.6.2/4.7/4.7.1:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework 4.6\KB4055002
"ThisVersionInstalled" = "Y"

 

Windows 7 Service Pack 1 (.NET Framework installations)

Reference table

The following table contains the security update information for .NET Framework installations that are running on all supported versions of Windows 7 Service Pack 1 for the monthly rollup.

Security update file name

For Microsoft .NET Framework 3.5.1 on all supported 32-bit editions of Windows 7 Service Pack 1:
Windows6.1-KB4054998-x86.msu

 

For Microsoft .NET Framework 4.5.2 when installed on all supported 32-bit editions of Windows 7 Service Pack 1:
NDP45-KB4054995-x86.exe

 

For Microsoft .NET Framework 4.6/4.6.1/4.6.2/4.7/4.7.1 when installed on all supported 32-bit editions of Windows 7 Service Pack 1:
NDP46-KB4055002-x86.exe

 

For Microsoft .NET Framework 3.5.1 on all supported x64-based editions of Windows 7 Service Pack 1:
Windows6.1-KB4054998-x64.msu

 

For Microsoft .NET Framework 4.5.2 when installed on all supported x64-based editions of Windows 7 Service Pack 1:
NDP45-KB4054995-x64.exe

 

For Microsoft .NET Framework 4.6/4.6.1/4.6.2/4.7/4.7.1 when installed on all supported x64-based editions of Windows 7 Service Pack 1:
NDP46-KB4055002-x64.exe

Installation switches

See Microsoft Knowledge Base Article 2844699.

Update log file

For Microsoft .NET Framework 3.5.1:
Not applicable.

 

For Microsoft .NET Framework 4.5.2:
KB 4054995_*_*-Microsoft .NET Framework [.NET target version]-MSP0.txt
KB 4054995_*_*.html

 

For Microsoft .NET Framework 4.6/4.6.1:
KB4055002_*_*-Microsoft .NET Framework 4.6/4.6.1-MSP0.txt
KB4055002_*_*.html

 

For Microsoft .NET Framework 4.6.2:
Not applicable.

Restart requirement

This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

Removal information

Select Control Panel, and then select Security. Under "Windows Update," select View installed updates, and then select from the list of updates.

File information

See Microsoft Knowledge Base Article 4054998.
See Microsoft Knowledge Base Article 4054995.
See Microsoft Knowledge Base Article 4055002.

Registry key verification

This update does not add a registry key to validate its installation. Use WMI to detect for the presence of this update.

 

For Microsoft .NET Framework 4.5.2:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework [.NET target version]\KB 4054995
”ThisVersionInstalled” = “Y”

 

For Microsoft .NET Framework 4.6/4.6.1:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework 4.6\KB 4055002
"ThisVersionInstalled" = "Y"

 

For Microsoft .NET 4.6.2:
This update does not add a registry key to validate its installation. Use WMI to detect this update.

 

Windows Server 2008 R2 (.NET Framework installations)

Reference table

The following table contains the security update information for .NET Framework installations that are running on all supported versions of Windows Server 2008 for the monthly rollup.

Security update file name

For Microsoft .NET Framework 3.5.1 on all supported x64-based editions of Windows Server 2008 R2 Service Pack 1:
Windows6.1-KB4054998-x64.msu

 

For Microsoft .NET Framework 4.5.2 when installed on all supported x64-based editions of Windows Server 2008 R2 Service Pack 1:
NDP45-KB4054995-x64.exe

 

For Microsoft .NET Framework 4.6/4.6.1/4.6.24.7 on all supported x64-based editions of Windows Server 2008 R2 Service Pack 1:
NDP46-KB4055002-x64.exe

 

For Microsoft .NET Framework 3.5.1 on Windows Server 2008 R2 for Itanium-based Systems Service Pack 1:
Windows6.1-KB 4054998-ia64.msu

Installation switches

See Microsoft Knowledge Base Article 2844699.

Update log file

For Microsoft .NET Framework 3.5.1:
Not applicable.

 

For Microsoft .NET Framework 4.5.2:
KB4054995_*_*-Microsoft .NET Framework [.NET target version]-MSP0.txt
KB4054995_*_*.html

 

For Microsoft .NET Framework 4.6/4.6.1:
KB4055002_*_*-Microsoft .NET Framework 4.6/4.6.1-MSP0.txt
KB4055002_*_*.html

 

For Microsoft .NET Framework 4.6.2:
Not applicable.

Restart requirement

This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

Removal information

Select Control Panel, and then select Security. Under "Windows Update," select View installed updates, and then select from the list of updates.

File information

See Microsoft Knowledge Base Article 4054998.
See Microsoft Knowledge Base Article 4054995.
See Microsoft Knowledge Base Article 4055002.

Registry key verification

For Microsoft .NET Framework 3.5.1:
This update does not add a registry key to validate its installation. Use WMI to detect for the presence of this update.

 

For Microsoft .NET Framework 4.5.2:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework [.NET target version]\KB4054995
”ThisVersionInstalled” = “Y”

 

For Microsoft .NET Framework 4.6/4.6.1:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework 4.6\KB4055002
"ThisVersionInstalled" = "Y"

 

For Microsoft .NET 4.6.2:
This update does not add a registry key to validate its installation. Use WMI to detect this update.

 

Windows 8.1 (.NET Framework installations)

Reference table

The following table contains the security update information for .NET Framework installations that are running on all supported versions of Windows 8.1 for the monthly rollup.

Security update file name

For Microsoft .NET Framework 3.5 on Windows 8.1 for 32-bit Systems:
Windows8.1-KB4054999-x86.msu

 

For Microsoft .NET Framework 4.5.2 on Windows 8.1 for 32-bit Systems:
Windows8.1-KB4054993-x86.msu

 

For Microsoft .NET Framework 4.6/4.6.1/4.6.2/4.7/4.7.1 on Windows 8.1 for 32-bit Systems:
Windows8.1-KB4055001-x86.msu

 

For Microsoft .NET Framework 3.5 on Windows 8.1 for x64-based Systems:
Windows8.1-KB4054999-x64.msu

 

For Microsoft .NET Framework 4.5.2 on Windows 8.1 for x64-based Systems:
Windows8.1-KB4054993-x64.msu

 

For Microsoft .NET Framework 4.6/4.6.1/4.6.2/4.7/4.7.1 on Windows 8.1 for x64-based Systems:
Windows8.1-KB4055001-x64.msu

Installation switches

See Microsoft Knowledge Base Article 2844699.

Restart requirement

This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

Removal information

Select Control Panel, and then select Security. Under "Windows Update," select View installed updates, and then select from the list of updates.

File information

See Microsoft Knowledge Base Article 4054999.
See Microsoft Knowledge Base Article 4054993.
See Microsoft Knowledge Base Article 4055001.

Registry key verification

These updates do not add a registry key to validate their installation. Use WMI to detect for the presence of these updates.

 

Windows Server 2012 and Windows Server 2012 R2 (.NET Framework installations)

Reference table

The following table contains the security update information for .NET Framework installations that are running on all supported versions of Windows Server 2012 and Windows Server 2012 R2 for the monthly rollup.

Security update file name

For Microsoft .NET Framework 3.5 on Windows Server 2012:
Windows8-RT-KB4054997-x64.msu

 

For Microsoft .NET Framework 4.5.2 on Windows Server 2012:
Windows8-RT-KB4054994-x64.ms

 

For Microsoft .NET Framework 4.6/4.6.1/4.6.2/4.7/4.7.1 on Windows Server 2012:
Windows8-RT-KB4055000-x64.msu

 

For Microsoft .NET Framework 3.5 on Windows Server 2012 R2:
Windows8.1-KB4054999-x64.msu

 

For Microsoft .NET Framework 4.5.2 on Windows Server 2012 R2:
Windows8.1-KB4054993-x64.msu

 

For Microsoft .NET Framework 4.6/4.6.1/4.6.2/4.7/4.7.1 on Windows Server 2012 R2:
Windows8.1-KB4055001-x64.msu

Installation switches

See Microsoft Knowledge Base Article 2844699.

Restart requirement

This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

Removal information

Select Control Panel, and then select Security. Under "Windows Update," select View installed updates, and then select from the list of updates.

File information

See Microsoft Knowledge Base Article 4054997.
See Microsoft Knowledge Base Article 4054994.
See Microsoft Knowledge Base Article 4055000.
See Microsoft Knowledge Base Article 4054999.
See Microsoft Knowledge Base Article 4054993.
See Microsoft Knowledge Base Article 4055001.

Registry key verification

These updates do not add a registry key to validate their installation. Use WMI to detect for the presence of these updates.

 

Windows RT 8.1 (all editions)

Reference table

The following table contains the security update information for .NET Framework installations that are running on Windows RT 8.1 for the monthly rollup.

Deployment

The 4054999 update is available via Windows Update only.
The 4054993 update is available via Windows Update only.
The 4055001 update is available via Windows Update only.

Restart Requirement

You must restart the system after applying this security update.

Removal Information

See Microsoft Knowledge Base Article 4054999.
See Microsoft Knowledge Base Article 4054993.
See Microsoft Knowledge Base Article 4055001.

File Information

See the individual Knowledge Base articles that are listed in the “Additional information about this security update” section.

 

Windows 10 (.NET Framework installations)

Reference table

The following table contains the security update information for .NET Framework installations that are running on all supported versions of Windows 10.

Security update file name

For Microsoft .NET Framework 3.5 on all supported editions of Windows 10 for 32-bit Systems:
Windows10.0-KB4056893-x86.msu

 

For Microsoft .NET Framework 3.5 on all supported editions of Windows 10 for x64-based Systems:
Windows10.0-KB4056893-x64.msu

 

For Microsoft .NET Framework 4.6 on all supported editions of Windows 10 for 32-bit Systems:
Windows10.0-KB4056893-x86.msu

 

For Microsoft .NET Framework 4.6 on all supported editions of Windows 10 for x64-based Systems:
Windows10.0-KB4056893-x86.msu

 

For Microsoft .NET Framework 3.5 on all supported 32-bit editions of Windows 10 version 1511:
Windows10.0-KB4056888-x86.msu

 

For Microsoft .NET Framework 3.5 on all supported x64-based editions of Windows 10 Version 1511:
Windows10.0-KB4056888-x64.msu

 

For Microsoft .NET Framework 4.6.1 on all supported 32-bit editions of Windows 10 version 1511:
Windows10.0-KB4056888-x86.msu

 

For Microsoft .NET Framework 4.6.1 on all supported x64-based editions of Windows 10 Version 1511:
Windows10.0-KB4056888-x64.msu

 

For Microsoft .NET Framework 3.5 on all supported 32-bit editions of Windows 10 version 1607:
Windows10.0-KB4056890-x86.msu

 

For Microsoft .NET Framework 3.5 on all supported x64-based editions of Windows 10 Version 1607:
Windows10.0-KB4056890-x64.msu

 

For Microsoft .NET Framework 4.6.2/4.7 on all supported 32-bit editions of Windows 10 version 1607:
Windows10.0-KB4056890-x86.msu

 

For Microsoft .NET Framework 4.6.2/4.7 on all supported x64-based editions of Windows 10 Version 1607:
Windows10.0-KB4056890-x64.msu

 

For Microsoft .NET Framework 3.5 on all supported 32-bit editions of Windows 10 version 1703:
Windows10.0-KB4056891-x86.msu

 

For Microsoft .NET Framework 3.5 on all supported x64-based editions of Windows 10 Version 1703:
Windows10.0-KB4056891-x64.msu

 

For Microsoft .NET Framework 4.7 on all supported 32-bit editions of Windows 10 version 1703:
Windows10.0-KB4056891-x86.msu

 

For Microsoft .NET Framework 4.7 on all supported x64-based editions of Windows 10 Version 1703:
Windows10.0-KB4056891-x64.msu

 

For Microsoft .NET Framework 3.5 on all supported 32-bit editions of Windows 10 version 1709:
Windows10.0-KB4056892-x86.msu

 

For Microsoft .NET Framework 3.5 on all supported x64-based editions of Windows 10 Version 1709:
Windows10.0-KB4056892-x64.msu

 

For Microsoft .NET Framework 4.7.1 on all supported 32-bit editions of Windows 10 version 1709:
Windows10.0-KB4056892-x86.msu

 

For Microsoft .NET Framework 4.7.1 on all supported x64-based editions of Windows 10 Version 1709:
Windows10.0-KB4056892-x64.msu

Installation switches

For Microsoft .NET Framework, see Microsoft Knowledge Base Article 2844699.

Restart requirement

Yes, you must restart your system after you apply this security update.

Removal information

WUSA.exe does not support uninstalling updates. To uninstall an update that was installed by WUSA, select Control Panel, and then select Security. Under "Windows Update," select View installed updates, and then select from the list of updates.

File information

See Microsoft Knowledge Base Article 4056893.
See Microsoft Knowledge Base Article 4056888.
See Microsoft Knowledge Base Article 4056890.
See Microsoft Knowledge Base Article 4056891.
See Microsoft Knowledge Base Article 4056892.

Registry key verification

These updates do not add a registry key to validate their installation.

 

Windows Server 2016 and Windows Server, version 1709 (Server Core installation)

Reference table

The following table contains the security update information for .NET Framework installations that are running on all supported versions of Windows 10.

Security update file name

For Microsoft .NET Framework 3.5 on Windows Server 2016:
Windows10.0-KB4056890-x64.msu

 

For Microsoft .NET Framework 4.6.2/4.7 on Windows Server 2016:
Windows10.0-KB4056890-x64.msu

 

For Microsoft .NET Framework 3.5 on Windows Server, version 1709:
Windows10.0-KB4056892-x64.msu

 

For Microsoft .NET Framework 4.7.1 on Windows Server, version 1709:
Windows10.0-KB4056892-x64.msu

Installation switches

For Microsoft .NET Framework, see Microsoft Knowledge Base Article 2844699.

Restart requirement

Yes, you must restart your system after you apply this security update.

Removal information

WUSA.exe does not support uninstalling updates. To uninstall an update that was installed by WUSA, select Control Panel, and then select Security. Under "Windows Update," select View installed updates, and then select from the list of updates.

File information

See Microsoft Knowledge Base Article 4056890.
See Microsoft Knowledge Base Article 4056892.

Registry key verification

These updates do not add a registry key to validate their installation.

 

Adobe Flash

Reference table

The following table contains the security update information for this software.

Security update file name

For Adobe Flash Player installed on Windows 8.1 for 32-bit systems:
Windows8.1-KB4056887-x86.msu

 

For Adobe Flash Player installed on Windows 8.1 for x64-based systems:
Windows8.1-KB4056887-x64.msu

 

For Adobe Flash Player installed on Windows RT 8.1:
Windows8.1-KB4056887-arm.msu

 

For Adobe Flash Player installed on Windows Server 2012:
Windows8-RT-KB4056887-x64.msu

 

For Adobe Flash Player installed on Windows Server 2012 R2:
Windows8.1-KB4056887-x64.msu

 

For Adobe Flash Player installed on Windows 10 for 32-bit Systems:
Windows10.0-KB4056887-x86.msu

 

For Adobe Flash Player installed on Windows 10 for x64-based Systems:
Windows10.0-KB4056887-x64.msu

 

For Adobe Flash Player installed on Windows 10 Version 1511 for 32-bit Systems:
Windows10.0-KB4056887-x86.msu

 

For Adobe Flash Player installed on Windows 10 Version 1511 for x64-based Systems:
Windows10.0-KB4056887-x64.msu

 

For Adobe Flash Player installed on Windows 10 Version 1607 for 32-bit Systems:
Windows10.0-KB4056887-x86.msu

 

For Adobe Flash Player installed on Windows 10 Version 1607 for x64-based Systems:
Windows10.0-KB4056887-x64.msu

 

For Adobe Flash Player installed on Windows 10 Version 1703 for 32-bit Systems:
Windows10.0-KB4056887-x86.msu

 

For Adobe Flash Player installed on Windows 10 Version 1703 for x64-based Systems:
Windows10.0-KB4056887-x64.msu

 

For Adobe Flash Player installed on Windows 10 Version 1709 for 32-bit Systems:
Windows10.0-KB4056887-x86.msu

 

For Adobe Flash Player installed on Windows 10 Version 1709 for x64-based Systems:
Windows10.0-KB4056887-x64.msu

 

For Adobe Flash Player installed on Windows Server 2016:
Windows10.0-KB4056887-x64.msu

Installation switches

See Microsoft Knowledge Base Article 934307

Restart requirement

You must restart the system after you apply this security update.

Removal information

Use the Add or Remove Programs item in Control Panel.

File information

See Microsoft Knowledge Base Article 4056887.

Registry key verification

This update does not add a registry key to validate its installation. Use WMI to detect this update.