MS15-058: Vulnerabilities in SQL Server could allow remote code execution: July 14, 2015

Introduction
This update resolves vulnerabilities in Microsoft SQL Server that could allow remote code execution if an authenticated attacker runs a specially crafted query that is designed to execute a virtual function from a wrong address. This leads to a function call to uninitialized memory.
Additional information about this security update
The following articles contain additional information about this security update as it relates to individual product versions. The articles may contain known issue information. If this is the case, the known issue is listed below each article link.
  • 3045303 MS15-058: Description of the security update for SQL Server 2008 Service Pack 3 QFE: July 14, 2015

    The following are the known issues in security update 3045303. For more information about these known issues, see security update 3045303.
    • You may be able to install this SQL Server 2008-based security update on a SQL Server 2005-based system on which SQL Server 2008 is not installed.

  • 3045305 MS15-058: Description of the security update for SQL Server 2008 Service Pack 3 GDR: July 14, 2015

    The following are the known issues in security update 3045305. For more information about these known issues, see security update 3045305.
    • You may be able to install this SQL Server 2008-based security update on a SQL Server 2005-based system on which SQL Server 2008 is not installed.

  • 3045308 MS15-058: Description of the security update for SQL Server 2008 Service Pack 4 QFE: July 14, 2015

    The following are the known issues in security update 3045308. For more information about these known issues, see security update 3045308.
    • You may be able to install this SQL Server 2008-based security update on a SQL Server 2005-based system on which SQL Server 2008 is not installed.

  • 3045311 MS15-058: Description of the security update for SQL Server 2008 Service Pack 4 GDR: July 14, 2015

    The following are the known issues in security update 3045311. For more information about these known issues, see security update 3045311.
    • You may be able to install this SQL Server 2008-based security update on a SQL Server 2005-based system on which SQL Server 2008 is not installed.

  • 3045312 MS15-058: Description of the security update for SQL Server 2008 R2 Service Pack 2 QFE: July 14, 2015

    The following are the known issues in security update 3045312. For more information about these known issues, see security update 3045312.
    • When you use the /? switch or the /Help switch with this security update package, you receive an error message.
    • After you install this security update, the Add or Remove Program entries for this security update do not have "Security Update" in the title of the security update.
    • After you install this security update, the Installation Wizard shows the security update as an "Update Program" instead of a "Security Update."

  • 3045313 MS15-058: Description of the security update for SQL Server 2008 R2 Service Pack 2 GDR: July 14, 2015

    The following are the known issues in security update 3045313. For more information about these known issues, see security update 3045313.
    • When you use the /? switch or the /Help switch with this security update package, you receive an error message.
    • After you install this security update, the Add or Remove Program entries for this security update do not have "Security Update" in the title of the security update.
    • After you install this security update, the Installation Wizard shows the security update as an "Update Program" instead of a "Security Update."

  • 3045314 MS15-058: Description of the security update for SQL Server 2008 R2 Service Pack 3 QFE: July 14, 2015

    The following are the known issues in security update 3045314. For more information about these known issues, see security update 3045314.
    • When you use the /? switch or the /Help switch with this security update package, you receive an error message.
    • After you install this security update, the Add or Remove Program entries for this security update do not have "Security Update" in the title of the security update.
    • After you install this security update, the Installation Wizard shows the security update as an "Update Program" instead of a "Security Update."

  • 3045316 MS15-058: Description of the security update for SQL Server 2008 R2 Service Pack 3 GDR: July 14, 2015

    The following are the known issues in security update 3045316. For more information about these known issues, see security update 3045316.
    • When you use the /? switch or the /Help switch with this security update package, you receive an error message.
    • After you install this security update, the Add or Remove Program entries for this security update do not have "Security Update" in the title of the security update.
    • After you install this security update, the Installation Wizard shows the security update as an "Update Program" instead of a "Security Update."

  • 3045317 MS15-058: Description of the security update for SQL Server 2012 SP1 QFE: July 14, 2015

    The following is the known issue in security update 3045317. For more information about these known issues, see security update 3045317.
    • An instance of SQL Server 2012 Service Pack 1 that has the MDS component installed but does not have the SQL Engine component installed may not discover this security update from Microsoft Update.


  • 3045318 MS15-058: Description of the security update for SQL Server 2012 SP1 GDR: July 14, 2015

    The following is the known issue in security update 3045318. For more information about these known issues, see security update 3045318.
    • An instance of SQL Server 2012 Service Pack 1 that has the MDS component installed but does not have the SQL Engine component installed may not discover this security update from Microsoft Update.


  • 3045319 MS15-058: Description of the security update for SQL Server 2012 Service Pack 2 QFE: July 14, 2015

  • 3045321 MS15-058: Description of the security update for SQL Server 2012 Service Pack 2 GDR: July 14, 2015

  • 3045323 MS15-058: Description of the security update for SQL Server 2014 QFE: July 14, 2015

    The following is the known issue in security update 3045323. For more information about these known issues, see security update 3045323.
    • The installation of a cumulative update that is an earlier version than the GDR branch version of this security update may succeed and partly overwrite the GDR branch security update.

  • 3045324 MS15-058: Description of the security update for SQL Server 2014 GDR: July 14, 2015

    The following is the known issue in security update 3045324. For more information about these known issues, see security update 3045324.
    • The installation of a cumulative update that is an earlier version than the GDR branch version of this security update may succeed and partly overwrite the GDR branch security update.

Nonsecurity-related fixes that are included in this security update

This security update also fixes the following nonsecurity-related issues:
  • 2969896 FIX: Data corruption occurs in clustered index when you run online index rebuild in SQL Server 2012 or SQL Server 2014
  • 3027857 FIX: Error 832 occurs after you apply update MS14-044 to SQL Server 2008 R2 or SQL Server 2008
  • 3027860 Error 17066 or 17310 during SQL Server startup
  • 3054530 FIX: Corruption occurs on pages of secondary replica when you change the secondary replica to unreadable
  • 3067257 FIX: Partial results in a query of a clustered columnstore index in SQL Server 2014

Security update deployment information

SQL Server 2008
Reference Table

The following table contains the security update information for this software.
Security update file namesFor GDR update of SQL Server 2008 for 32-bit Systems Service Pack 3:
SQLServer2008-KB3045305-x86.exe
For GDR update of SQL Server 2008 for x64-based Systems Service Pack 3:
SQLServer2008-KB3045305-x64.exe
For GDR update of SQL Server 2008 for Itanium-based Systems Service Pack 3:
SQLServer2008-KB3045305-IA64.exe
For QFE update of SQL Server 2008 for 32-bit Systems Service Pack 3:
SQLServer2008-KB3045303-x86.exe
For QFE update of SQL Server 2008 for x64-based Systems Service Pack 3:
SQLServer2008-KB3045303-x64.exe
For QFE update of SQL Server 2008 for Itanium-based Systems Service Pack 3:
SQLServer2008-KB3045303-IA64.exe
For GDR update of SQL Server 2008 for 32-bit Systems Service Pack 4:
SQLServer2008-KB3045311-x86.exe
For GDR update of SQL Server 2008 for x64-based Systems Service Pack 4:
SQLServer2008-KB3045311-x64.exe
For QFE update of SQL Server 2008 for 32-bit Systems Service Pack 4:
SQLServer2008-KB3045308-x86.exe
For QFE update of SQL Server 2008 for x64-based Systems Service Pack 4:
SQLServer2008-KB3045308-x64.exe
Installation switchesSee Microsoft Knowledge Base Article 934307
Update log file%programfiles%\Microsoft SQL Server\100\Setup Bootstrap\LOG\<TimeStamp>\MSSQLServer\Summary_<MachineName>_<Timestamp>.txt
Special instructionsThe update will also be offered to instances of SQL Server 2008 that are clustered.

If your SQL Server 2008 cluster has a passive node, to reduce downtime, we recommend that you scan and apply the update to the inactive node first, and then scan and apply to the active node. When all components have been updated on all nodes, the update will no longer be offered.
Restart requirementA restart of the instance of SQL Server is required if files are being used.
If a system restart is required, the installer will prompt or return exit code 3010.
Removal informationFor all supported editions of SQL Server 2008: Use Add or Remove Programs in Control Panel.
File informationFor GDR updates of SQL Server 2008 Service Pack 3:
See Microsoft Knowledge Base Article 3045305

For QFE updates of SQL Server 2008 Service Pack 3:
See Microsoft Knowledge Base Article 3045303

For GDR updates of SQL Server 2008 Service Pack 4:
See Microsoft Knowledge Base Article 3045311

For QFE updates of SQL Server 2008 Service Pack 4:
See Microsoft Knowledge Base Article 3045308
SQL Server 2008 R2
Reference Table

The following table contains the security update information for this software.
Security update file namesFor GDR update of SQL Server 2008 R2 for 32-bit Systems Service Pack 2:
SQLServer2008R2-KB3045313-x86.exe
For GDR update of SQL Server 2008 R2 for x64-based Systems Service Pack 2:
SQLServer2008R2-KB3045313-x64.exe
For GDR update of SQL Server 2008 R2 for Itanium-based Systems Service Pack 2:
SQLServer2008R2-KB3045313-IA64.exe
For QFE update of SQL Server 2008 R2 for 32-bit Systems Service Pack 2:
SQLServer2008R2-KB3045312-x86.exe
For QFE update of SQL Server 2008 R2 for x64-based Systems Service Pack 2:
SQLServer2008R2-KB3045312-x64.exe
For QFE update of SQL Server 2008 R2 for Itanium-based Systems Service Pack 2:
SQLServer2008R2-KB3045312-IA64.exe
For GDR update of SQL Server 2008 R2 for 32-bit Systems Service Pack 3:
SQLServer2008R2-KB3045316-x86.exe
For GDR update of SQL Server 2008 R2 for x64-based Systems Service Pack 3:
SQLServer2008R2-KB3045316-x64.exe
For QFE update of SQL Server 2008 R2 for 32-bit Systems Service Pack 3:
SQLServer2008R2-KB3045314-x86.exe
For QFE update of SQL Server 2008 R2 for x64-based Systems Service Pack 3:
SQLServer2008R2-KB3045314-x64.exe
Installation switchesSee Microsoft Knowledge Base Article 934307
Update log file%programfiles%\Microsoft SQL Server\100\Setup Bootstrap\LOG\<TimeStamp>\MSSQLServer\Summary_<MachineName>_<Timestamp>.txt
Special instructionsThe update will also be offered to instances of SQL Server 2008 R2 that are clustered.

If your SQL Server 2008 R2 cluster has a passive node, to reduce downtime, we recommend that you scan and apply the update to the inactive node first, and then scan and apply to the active node. When all components have been updated on all nodes, the update will no longer be offered.
Restart requirementA restart of the instance of SQL Server is required.
If a system restart is required, the installer will prompt or return exit code 3010.
Removal informationFor all supported editions of SQL Server 2008 R2:
Use Add or Remove Programs in Control Panel.
File informationFor GDR updates of SQL Server 2008 R2 Service Pack 2:
See Microsoft Knowledge Base Article 3045313

For QFE updates of SQL Server 2008 R2 Service Pack 2:
See Microsoft Knowledge Base Article 3045312

For GDR updates of SQL Server 2008 R2 Service Pack 3:
See Microsoft Knowledge Base Article 3045316

For QFE updates of SQL Server 2008 R2 Service Pack 3:
See Microsoft Knowledge Base Article 3045316
SQL Server 2012
Reference Table

The following table contains the security update information for this software.
Security update file namesFor GDR update of SQL Server 2012 for 32-bit Systems Service Pack 1:
SQLServer2012-KB3045318-x86.exe
For GDR update of SQL Server 2012 for x64-based Systems Service Pack 1:
SQLServer2012-KB3045318-x64.exe
For QFE update of SQL Server 2012 for 32-bit Systems Service Pack 1:
SQLServer2012-KB3045317-x86.exe
For QFE update of SQL Server 2012 for x64-based Systems Service Pack 1:
SQLServer2012-KB3045317-x64.exe
For GDR update of SQL Server 2012 for 32-bit Systems Service Pack 2:
SQLServer2012-KB3045321-x86.exe
For GDR update of SQL Server 2012 for x64-based Systems Service Pack 2:
SQLServer2012-KB3045321-x64.exe
For QFE update of SQL Server 2012 for 32-bit Systems Service Pack 2:
SQLServer2012-KB3045319-x86.exe
For QFE update of SQL Server 2012 for x64-based Systems Service Pack 2:
SQLServer2012-KB3045319-x64.exe
Installation switchesSee Microsoft Knowledge Base Article 934307
Update log file%programfiles%\Microsoft SQL Server\110\Setup Bootstrap\LOG\<TimeStamp>\MSSQLServer\Summary_<MachineName>_<Timestamp>.txt
Special instructionsThe update will also be offered to instances of SQL Server 2012 that are clustered.

If your SQL Server 2012 cluster has a passive node, to reduce downtime, we recommend that you scan and apply the update to the inactive node first, and then scan and apply to the active node. When all components have been updated on all nodes, the update will no longer be offered.
Restart requirementA restart of the instance of SQL Server is required if files are being used.
If a system restart is required, the installer will prompt or return exit code 3010.
Removal informationFor all supported editions of SQL Server 2012:

The update removal procedure differs by scenario as follows:

Scenario 1: If the SQL Server engine is installed without SQL Server Master Data Services (MDS) on the same computer, you can remove the update by using the Add or Remove Programs item in Control Panel. You do not have to remove the SQL Server engine.

Scenario 2: If the SQL Server engine is installed together with MDS on the same computer, follow these steps:
  1. Remove the update for the SQL Server engine by using the Add or Remove Programs item in Control Panel. You do not have to remove the SQL Server engine.
  2. Back up the MDS database.
  3. Remove the MDS component.
  4. Reinstall the MDS component.
  5. Apply any necessary SQL Server service packs or service updates to bring MDS to its pre-security update version.

Scenario 3: If MDS is installed on a computer that does not have the SQL Server engine installed, follow these steps:
  1. Back up the MDS database.
  2. Remove the MDS component.
  3. Reinstall the MDS component.
  4. Apply any necessary SQL Server service packs or service updates to bring MDS to its pre-security update version.

File informationFor GDR updates of SQL Server 2012 Service Pack 1:
See Microsoft Knowledge Base Article 3045318

For QFE updates of SQL Server 2012 Service Pack 1:
See Microsoft Knowledge Base Article 3045317

For GDR updates of SQL Server 2012 Service Pack 2:
See Microsoft Knowledge Base Article 3045321

For QFE updates of SQL Server 2012 Service Pack 2:
See Microsoft Knowledge Base Article 3045321
SQL Server 2014
Reference Table

The following table contains the security update information for this software.
Security update file namesFor GDR update of SQL Server 2014 for 32-bit Systems
SQLServer2014-KB3045324-x86-ENU.exe
For GDR update of SQL Server 2014 for x64-based Systems:
SQLServer2014-KB3045324-x64-ENU.exe
For QFE update of SQL Server 2014 for 32-bit Systems
SQLServer2014-KB3045323-x86-ENU.exe
For QFE update of SQL Server 2014 for x64-based Systems:
SQLServer2014-KB3045323-x64.exe
Installation switchesSee Microsoft Knowledge Base Article 934307
Update log file%programfiles%\Microsoft SQL Server\12\Setup Bootstrap\LOG\<TimeStamp>\MSSQLServer\Summary_<MachineName>_<Timestamp>.txt
Special instructionsThe update will also be offered to instances of SQL Server 2014 that are clustered.

If your SQL Server 2014 cluster has a passive node, to reduce downtime, we recommend that you scan and apply the update to the inactive node first, and then scan and apply to the active node. When all components have been updated on all nodes, the update will no longer be offered.
Restart requirementA restart of the instance of SQL Server is required if files are being used.
If a system restart is required, the installer will prompt or return exit code 3010.
Removal informationFor all supported editions of SQL Server 2014, follow these steps:
  1. Back up the MDS database.
  2. Remove the MDS component.
  3. Reinstall the MDS component.
  4. Apply any necessary SQL Server service packs or service updates to bring MDS to its pre-security update version.

File informationFor GDR updates of SQL Server 2014:
See Microsoft Knowledge Base Article 3045324

For QFE updates of SQL Server 2014:
See Microsoft Knowledge Base Article 3045323

File hash information

File nameSHA1 hashSHA256 hash
SQLServer2008-KB3045303-IA64.exe544AAF4E2C4C3448C65FD7C92F072233DF3E8217100D51CCEB84366275531891A918AD41B64A02BB2BCC24FD4F633A963EDFEA95
SQLServer2008-KB3045303-x64.exeB3C677B1410D8707A30514A037C1080BC0B6E70D623E09598B28E931801E1542AF98769EBD5AC245DC33173499F7E6D7F7C89E9A
SQLServer2008-KB3045303-x86.exeD2E7E82FD524F8135294BA9242776470519F739B0579A2361284E51B483312440D00B0AC317D732894E42BFE172C6CADA57E4DB2
SQLServer2008-KB3045305-IA64.exeAB09B42736FEA9638F901C1A802EAB78CE229BC03B0EEA3349B548A7816B34B06E11472AC60F75A887E10DE89BEFB3C9110009C2
SQLServer2008-KB3045305-x64.exeB3EAF5A2FA2D77F5F9B54D306A3895DC4E3166D014D22FDBE3F860CEDBB4B26BE5DE5DF65E912FD82D5917906BF6FCC4898542CB
SQLServer2008-KB3045305-x86.exeFB6A21F80ADBD0308EEF601B4E6B2F3CD0673EC786196906574554390E4CDC0D85B9F48858F26F10B3DD83A1D0D080214C9A6425
SQLServer2008-KB3045308-x64.exeC3E95302146020A9AE5E460A5233C404FF28473832E3CB421530E27ADDCA9D29908FC8671A739EEC62F5570A1A5284022C37571A
SQLServer2008-KB3045308-x86.exe5B6D0C9E47B7FE6600916B3C863F6E18D161AD54B09E5705333CEF4A5D58E727BA728F76D24C064DAFD72E72ACBB2449CB6C9BA8
SQLServer2008-KB3045311-x64.exe37A197C60990D2E83E98D1090109A4AB3F2ABE4B51E90F94E0274D46ECCF0EC603926783E19641FF10A47351F96319AC5DAA48F9
SQLServer2008-KB3045311-x86.exe30561AEF89C6D174FEE7B77BED6B3B8539542558B52D4692655C0C4A5D4391665F6BD14BEF78246CA2663F284B55DA1293598093
SQLServer2008R2-KB3045312-IA64.exe848DC578D2AF702E6481242BB38D66BC69C75F455313000E8F5E86D684D60972325CDD41A7F5E897B3420FDAA93B415B1B45A4E0
SQLServer2008R2-KB3045312-x64.exeD2F037C8627B18662FE53F583AF3B4FACFBF8A9172F31C407AE9C152B6FEA96C2566053F1717A90FB75558C4005D6E3A1845CF7A
SQLServer2008R2-KB3045312-x86.exe8EA13902258CD17DA157C5B62777ECB41BA1D3A42603C6D68AC1E154DCE25B39DF4B7DA55FB630610086585D1E96967E63AA8397
SQLServer2008R2-KB3045313-IA64.exe98AE6B0DF61F359819975B64A42ACDB575D6823E3BC905B436D29DB1567E342AF98591D7E0489AA6741DDDB9C478C4840EBF80A8
SQLServer2008R2-KB3045313-x64.exeB618DDD387BA863EBF4C432AB0CB54C3A433BC12938F7199F6DD4AC708C1A14F02AA1B1CEF1ECC9F56152EBB85169E9992DA4260
SQLServer2008R2-KB3045313-x86.exe88CEFBD7FC3F0A0F5C8AE02051F7AAF200E04DF330C23C7E23E46F6FF145CA3D9F7509C5EFA3393B0F56BD70770A8A2C62006200
SQLServer2008R2-KB3045314-x64.exe5C8070DCF7080228708809E27826AA366006472243FA0BF3D799AF860C201BE3FA1241E3115E6D29399B4FD1413934E90EC70C47
SQLServer2008R2-KB3045314-x86.exe24395C1F2A0F517336393176115710DB181D160EDAAC57D4EDB7AD7D57634DFC0BE3A8CD395B71DE269DB984EDB83AE6D9E4C1C5
SQLServer2008R2-KB3045316-x64.exe3AA4D820553B1E5D96735541CBB55D97322C286EF8A45DE74DE1EF4559AB7A6C24427306C592A7A0C21994A8B81A70B1E6211869
SQLServer2008R2-KB3045316-x86.exe9A2F7F26EC9780EDD232A37B7A5BA557155D55AC53ED493F14915F03162704B55D90831F1B236865AB2956D11F4B5E83A85CFE77
SQLServer2012-KB3045317-x64.exeDC222C42CB297AF745206FEC69284DE68564034FD01DE2DB4B4A9B296B52F3EC8A38BDEEC15536164C43CD76EB63A89BB36B8F18
SQLServer2012-KB3045317-x86.exeEC5FC12A75627F26D21C0EAD8752AF37FF9162F44CA1EEF6C860CA5A009753CD6041B7670DC88B026463EA0AEC55BA378E00DD8B
SQLServer2012-KB3045318-x64.exe3907D610C8617006511645EF893519FA561BF20DA1B0FA9A1F99953D58D06EC110AE2DF6240DD434ECDFBECA0258BA47E984F5BE
SQLServer2012-KB3045318-x86.exe46A963922F513CB1394D96D970536D9EF3B8BB810F07D2CE1112B5AD33DACE494DD8533A6C2F26660ABC26BA57E7B2083994F6C2
SQLServer2012-KB3045319-x64.exe5E52E0CAB1C79474394FDC05412BF83B99FB0465871624153BE73E211D66E7302802E3D2DFBC3CEF7CB69CED1DF4F7EE7C6E3E32
SQLServer2012-KB3045319-x86.exeB41DD0EF2538C3ACC049BA703FA21FB5D74B7E3CCC4687F108FC4F517CD72664F36A325BBA0C30E5DDAE4D4B5C94FF83832291DE
SQLServer2012-KB3045321-x64.exe458032F7BDA3F45C0641C5417628034080297F4F20B65E8A0997C294AEE2C5F473CEE84E90DD94D1D89A15EFCF70DA292BA7C468
SQLServer2012-KB3045321-x86.exeDD99F1E0E54C944122DEB5AC24A1853D118C7D1F7DBBF3BCC66C9458D64B6211FDF6F0ED71EA261E748D4AC1A5B20C7BF929DA5A
SQLServer2012-SetupData-KB3045317-x64.exeFA22708FBD878C8381FEDB87E55D7F5CB0C4994F9412997C4BC8A5DD47D97B366B5FF955AAE3330BB8AF1F9D4B1F11150A801538
SQLServer2012-SetupData-KB3045317-x86.exe82F287862821AD76C3071004FA066E6FED09CE041C4045BD64BC63D7D4767FE30FC7C11550C483E9ACC8EE54739072E951920BD3
SQLServer2012-SetupData-KB3045318-x64.exe23F5DE270D00DDBCFC41170049C10D6C56C4618390C73BD6B0C5799F6C0C3AD8088D2952DB0AAE5E6F20BD8637D85B03F2570F60
SQLServer2012-SetupData-KB3045318-x86.exe17583390BD873067274B970147859D46FDE0E59C520F1BED26B1F86EFEEE0F89E87EC7DFEF4D58B1E2DC4F49E06F7D1B5F0F4E4D
SQLServer2012-SetupData-KB3045319-x64.exe766261320A7890AEE700F91948117DF94A3C93BA6176931FD3518460E4A83FAA0D191FBB75C9463B64C3152F0EF3D349024B4988
SQLServer2012-SetupData-KB3045319-x86.exe22B4BB837B76966D13B7B991C6AE84AE8B731A53C50E25ED3F08D290E26026099FC978BDCB0E2C84DB4D386195095C9B28E5D298
SQLServer2012-SetupData-KB3045321-x64.exe4E2A29FCDD821AA7E936B474FEB130982784FB37303D0402727C90D47236288E2D01AA0097D32F0ED8CAB190251140F8AA07FD9B
SQLServer2012-SetupData-KB3045321-x86.exeDCB82ADEACF54CFE8811E31C082E8B73FDA2614CD4B903708E9E4D87A6D07B165E0A8D3067EF1487E8AE0CA70383E3E1A7C00B04
SQLServer2012-SqlSupport-KB3045317-x64.exe97C57F649CC35B498C39FC871BC979648D8C7380AF039510361CBD013CE9C292B6193B5C078F0207FA24123ACA2C447872667A36
SQLServer2012-SqlSupport-KB3045317-x86.exeE324591F41B144A891E349D157F2984BC0989D99BDFD8F6E7D0376E73BC880E4305CA553DCE968E64C6A5FA1597026A08D042A36
SQLServer2012-SqlSupport-KB3045318-x64.exe29491F4222CFDBB161E4AF2DBBA3F9BC9E0FDDA9E19A3120BBF06E2F5BD5ED0948B51DB31035162D99DCA3F70A8D82ACE2497EC8
SQLServer2012-SqlSupport-KB3045318-x86.exeF071FF15877597DFA6B7B327E574C9C77E63DCD7B2AED914A65B88C491AFC2FB095DF05D89594981E1A7713AA825398ABD83D054
SQLServer2012-SqlSupport-KB3045319-x64.exeE7F85501DAED0FEFB2BFE7D74A664743202A252AC84D11FF27F6C5A480F095F74FC213D1E6E3867712FD8B41AAD24F929EAD88E9
SQLServer2012-SqlSupport-KB3045319-x86.exe7B34EBDBF448E5A375D7D675823C4E406F55EB8F530BCB8EEA4D8163FB2FF929F23E8085E17BE42AE535521C5D7711FA94810EDE
SQLServer2012-SqlSupport-KB3045321-x64.exeC6423219609903C8D6233A094CB6B3B928F9DD7D142962FE911421DA5B59BD5B77C9C03BD00643A75879C1E72C96F43ECBE2B9E4
SQLServer2012-SqlSupport-KB3045321-x86.exe060392E40479913E480A879FBB711AAFEA6C928B64286B199D492EB07372C9D50B4FFA1111EBB7EC71F701E8CE4F6AA388CB15EF
SQLServer2014-KB3045323-x64.exe3C983534D2487A4023E908A2813E1A056F0904F2B150ECA61E6CBAE9969DEDA825146C04393914386D2E940AA34448EC9A77F9C2
SQLServer2014-KB3045323-x86.exe887737B05FBBD0D544C7B4AFACD29F693C234D7BCEA23F33BE34313E28E3EED6E09A08BC07A31DFF41367DCC733847ED3458967F
SQLServer2014-KB3045324-x64-ENU.exe2345A35AE51225898E112702A2012F113A47D5C97A66D85C4FF0BA83E6678BF1187BCDDFA275AE43A7488E3D9E9930618CCAC2D7
SQLServer2014-KB3045324-x86-ENU.exe63339A6B390AFC9D05643525E4B3932BD3799B088B303FDB2EEB1B2C9E333AD3284B927F8B9A5A14605F9668DF50C15D13B19554
SQLServer2014-SetupData-KB3045323-x64.exe11F40CD79C2550C1F9E4D60E6F02523E27F1E97284C2E85A092A88A7B98F4F176FBBA6F59DA5095CE12A1824183AF21BDE4B976F
SQLServer2014-SetupData-KB3045323-x86.exeF7CC76AA381F8834BDE5644BC254952906C3F5EDBF6899E283AF37222A90AD23DA449E153E92E7DA2425C05BC5A45049F793C6B6
SQLServer2014-SetupData-KB3045324-x64-ENU.exe674D1FCA609F9D38A535A33A423E3102C629EFAA0528B60BBC974C985277DA9E347A4ACECD4BA230E5188E0EE0A1A28F6216AF04
SQLServer2014-SetupData-KB3045324-x86-ENU.exeD3D2D9B035AB8FE7024BE7CE7A2C08DF1A994967076D75B9FB4A70DAC80BBB575C0354E703D7B9DC6CDEBDA9C776F3307C84538E
SQLServer2014-SqlSupport-KB3045323-x64.exe28868A34F1387F32B1EDD092F54C86C85E1CC23B646E6EBA561DF5A76524A92F9DBDF170DDC8B4E9BB9FA39FD77740E0F4A5F378
SQLServer2014-SqlSupport-KB3045323-x86.exe1BDF16A3C0539A88D29946CBDE839E67820F8684C6B88D286E617FD98BCFC653E7FE476EFA965C7F2CF2842B1F36B65AD64A7176
SQLServer2014-SqlSupport-KB3045324-x64-ENU.exeA8CEEE5D667DF9F6488BD980EE837DBB7C823763A9AFEED5E26A90165FDCE859F677A7FB8A8A9655E212B180825DBA12A1A0AED2
SQLServer2014-SqlSupport-KB3045324-x86-ENU.exe415A7445843CDDFE539E1B65A1FA7D8F1C74C11EB85F26D9C4F4053206649ECA9AD5FA1D19D8ACF8461BFB0C33874F25E81BB5D1
SSDTBI_VS2012_x86_ENU.exe927F64DC29C8288CB883843CD6F48F818895459A041744217CF6929067BC1612DB9C641C2B2C9BB8466AE03499EA30F782592742
SSDTBI_x86_ENU.exeD90A2006889721032B87E49AE43BBE9F6CAFF4A3B1E2EF24B1F3E371996CA0F5A05CF1DD08CAD864637D13C1ED03B7FA9804889F

How to obtain help and support for this security update

Help for installing updates: Support for Microsoft Update

Security solutions for IT professionals: TechNet Security Troubleshooting and Support

Help for protecting your Windows-based computer from viruses and malware: Virus Solution and Security Center

Local support according to your country: International Support
Properties

Article ID: 3065718 - Last Review: 08/02/2015 17:26:00 - Revision: 2.0

Microsoft SQL Server 2014 Developer, Microsoft SQL Server 2014 Enterprise, Microsoft SQL Server 2014 Express, Microsoft SQL Server 2014 Standard, Microsoft SQL Server 2012 Service Pack 2, Microsoft SQL Server 2012 Service Pack 1, Microsoft SQL Server 2008 R2 Service Pack 3, Microsoft SQL Server 2008 R2 Service Pack 2, Microsoft SQL Server 2008 Service Pack 4, Microsoft SQL Server 2008 Service Pack 3

  • kbsecvulnerability kbsecurity kbsecbulletin kbfix kbexpertiseinter kbbug atdownload KB3065718
Feedback