MS16-127: Security update for Adobe Flash Player: October 11, 2016

Summary
This security update resolves vulnerabilities in Adobe Flash Player when installed on all supported editions of Windows 8.1, Windows Server 2012, Windows Server 2012 R2, Windows RT 8.1, and Windows 10.

To learn more about the vulnerability, see Microsoft Security Bulletin MS16-127.
More information
Important

  • All future security and non-security updates for Windows RT 8.1, Windows 8.1, and Windows Server 2012 R2 require update 2919355 to be installed. We recommend that you install update 2919355 on your Windows RT 8.1-based, Windows 8.1-based, or Windows Server 2012 R2-based computer so that you receive future updates.
  • If you install a language pack after you install this update, you must reinstall this update. Therefore, we recommend that you install any language packs that you need before you install this update. For more information, see Add language packs to Windows.
  • This security update applies to the Windows operating systems that are listed in the "Applies to" section in this article. If you want to install Adobe Flash Player update on an earlier version of Windows, try Adobe Flash Player Download.
How to obtain and install the update

Method 1: Windows Update

This update is available through Windows Update. When you turn on automatic updating, this update will be downloaded and installed automatically. For more information about how to turn on automatic updating, see Get security updates automatically.

Note For Windows RT 8.1, this update is available through Windows Update only.

Method 2: Microsoft Update Catalog

To get the stand-alone package for this update, go to the Microsoft Update Catalog website.

Method 3: Microsoft Download Center

You can obtain the stand-alone update package through the Microsoft Download Center. Follow the installation instructions on the download page to install the update.

Click the download link in Microsoft Security Bulletin MS16-127 that corresponds to the version of Windows that you are running.
More information

Detection and deployment tools and guidance



Security Central

You can manage the software and security updates that you have to deploy to the servers, desktops, and mobile systems in your organization. For more information, see the TechNet Update Management Center. TheMicrosoft TechNet Security website provides more information about security in Microsoft products.

Security updates are available from the Microsoft Download Center. You can find security updates most easily by doing a keyword search for "security update."

You can download security updates from theMicrosoft Update Catalog. The Microsoft Update Catalog provides a searchable catalog of content that is made available through Windows Update and Microsoft Update. This includes security updates, drivers, and service packs. For more information about the Microsoft Update Catalog, see theMicrosoft Update Catalog FAQ.

Detection and deployment guidance

Microsoft provides detection and deployment guidance for security updates. This guidance contains recommendations and information that can help IT professionals understand how to use various tools for detection and deployment of security updates. For more information, seeMicrosoft Knowledge Base article 961747.

Microsoft Baseline Security Analyzer

Microsoft Baseline Security Analyzer (MBSA) lets administrators scan local and remote systems for missing security updates and common security misconfigurations. For more information, seeMicrosoft Baseline Security Analyzer.

Note Customers who use legacy software that is not supported by the latest release of MBSA, Microsoft Update, and Windows Server Update Services should see the "Legacy Product Support" section ofMicrosoft Baseline Security Analyzer. Here, they will find information about how to create comprehensive security update detection by using legacy tools.

Windows Server Update Services

Windows Server Update Services (WSUS) lets information technology administrators deploy the latest Microsoft product updates to computers that are running Windows. For more information about how to deploy security updates by using Windows Server Update Services, see the following Microsoft TechNet topic:

Systems Management Server

The following table provides the Microsoft Systems Management Server (SMS) detection and deployment summary for this security update.

SoftwareSMS 2003 with ITMUSystem Center Configuration Manager
Windows 8.1 for 32-bit systems NoYes
Windows 8.1 for 64-bit systemsNoYes
Windows Server 2012 and Windows Server 2012 R2NoYes
Note Microsoft discontinued support for SMS 2.0 on April 12, 2011. For SMS 2003, Microsoft also discontinued support for the Security Update Inventory Tool (SUIT) on April 12, 2011. Customers are encouraged to upgrade to System Center Configuration Manager.

For SMS 2003, the SMS 2003 Inventory Tool for Microsoft Updates (ITMU) can be used by SMS to detect security updates that are supported byWindows Server Update Services. For more information, see Systems Management Server 2003.
System Center Configuration Manager uses WSUS 3.0 for detection of updates. For more information, seeSystem Center.

For detailed information, seeMicrosoft Knowledge Base article 910723: Summary list of monthly detection and deployment guidance articles.

Update Compatibility Evaluator and Application Compatibility Toolkit

Updates frequently write to the same files and registry settings that are required for your applications to run. This can trigger incompatibilities and increase the time that is required to deploy security updates. You can streamline the testing and validation of Windows updates against installed applications by using the Update Compatibility Evaluator components that are included in the Application Compatibility Toolkit (ACT).

The Application Compatibility Toolkit contains the necessary tools and documentation to evaluate and decrease application compatibility issues before you deploy Windows Vista, a Windows update, a Microsoft Security update, or a new version of Windows Internet Explorer in your environment.

Security update deployment



Windows 8.1 (all editions)



Reference table
The following table contains the security update information for this software. You can find more information in the "Deployment information" section.


DeploymentInformation
For Adobe Flash Player in Internet Explorer 11 on all supported 32-bit editions of Windows 8.1:
Windows8.1-KB3194343-x86.msu /quiet
For Adobe Flash Player in Internet Explorer 11 on all supported x64-based editions of Windows 8.1:
Windows8.1-KB3194343-x64.msu /quiet
For Adobe Flash Player in Internet Explorer 11 on all supported 32-bit editions of Windows 8.1:
Windows8.1-KB3194343-x86.msu /quiet /norestart
For Adobe Flash Player in Internet Explorer 11 on all supported x64-based editions of Windows 8.1:
Windows8.1-KB3194343-x64.msu /quiet /norestart
More informationSee the "Detection and deployment tools and guidance" subsection.
Restart requirementIn some cases, this update does not require a restart. If the required files are being used, this update requires a restart. If this behavior occurs, you receive a message that advises you to restart. To help reduce the possibility that a restart will be required, you should stop all affected services and close all applications that may use the affected files before you install the security update. For more information about why you may be prompted to restart, seeMicrosoft Knowledge Base article 887012.
HotpatchingNot applicable
Removal informationTo uninstall an update that was installed by WUSA, use the /Uninstall setup switch. Or, click Control Panel, click System and Security, click View installed updates under Windows Update, and then select from the list of updates.
Registry key verificationThere is no registry key to validate the presence of this update.
Inclusion in future service packsThe update for this issue will be included in a future service pack or update rollup.


Deployment information

Installing the update
When you install this security update, the installer checks whether one or more of the files that are being updated on your system have previously been updated by a Microsoft hotfix.

For more information about the terminology that appears in this Knowledge Base article, such as "hotfix," seeMicrosoft Knowledge Base article 824684.

This security update supports the following installation switches.

SwitchDescription
/?, /h, /helpDisplays help about supported switches.
/quietSuppresses the display of status or error messages.
/norestartWhen it is combined with /quiet, the system is not restarted after installation even if a restart is required to complete installation.
/warnrestart:<seconds>When it is combined with /quiet, the installer warns the user before it begins the restart.
/promptrestartWhen it is combined with /quiet, the installer prompts before it begins restart.
/forcerestartWhen it is combined with /quiet, the installer forcibly closes applications and begins the restart.
/log:<file name>Enables logging to the specified file.
/extract:<destination>Extracts the package contents to the destination folder.
/uninstall /kb:<KB number>Uninstalls the security update.
Note For more information about the Wusa.exe installer, see the "Windows Update Stand-alone Installer" section in the TechNet articleMiscellaneous Changes in Windows 7.
Verifying that the update was applied
Because there are several editions of Windows, the following steps may be different on your system. If they are different, see your product documentation to complete these steps.

Verifying the file version

  1. Click Start, and then type an update file name in the Search box.
  2. When the file appears under Programs, right-click the file name, and then click Properties.
  3. On the General tab, compare the file size to that listed in the file information tables that are provided in this Microsoft Knowledge Base article.

    Note Depending on the edition of the operating system or the programs that are installed on your system, some files that are listed in the file information table may not be installed.
  4. You can also click the Details tab to compare information, such as file version and date changed, to that in the file information tables that are provided in the Microsoft Knowledge Base article.

    Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update was applied. Also, in certain cases, files are renamed during installation. If the file or version information does not exist, use one of the other available methods to verify update installation.
  5. You can also click the Previous Versions tab to compare file information for the earlier version of the file together with the file information for the new, or updated, version of the file.


Windows Server 2012 and Windows Server 2012 R2 (all editions)

Reference table
The following table contains the security update information for this software. You can find more information in the "Deployment information" subsection in this section.

DeploymentInformation
Installing without requiring user interventionFor Adobe Flash Player in Internet Explorer 10 on all supported editions of Windows Server 2012:
Windows8-RT-KB3194343-x64.msu /quiet
For Adobe Flash Player in Internet Explorer 11 on all supported editions of Windows Server 2012 R2:
Windows8.1-KB3194343-x64.msu /quiet
Installing without restartingFor Adobe Flash Player in Internet Explorer 10 on all supported editions of Windows Server 2012:
Windows8-RT-KB3194343-x64.msu /quiet /norestart
For Adobe Flash Player in Internet Explorer 11 on all supported editions of Windows Server 2012 R2:
Windows8.1-KB3194343-x64.msu /quiet /norestart
More informationSee the "Detection and deployment tools and Guidance" subsection.
Restart requirementIn some cases, this update does not require a restart. If the required files are being used, this update requires a restart. If this behavior occurs, you receive a message that advises you to restart. To help reduce the possibility that a restart will be required, you should stop all affected services and close all applications that may use the affected files before you install the security update. For more information about why you may be prompted to restart, seeMicrosoft Knowledge Base article 887012.
HotpatchingNot applicable
Removal informationTo uninstall an update that was installed by WUSA, use the /Uninstall setup switch. Or, click Control Panel, click System and Security, click View installed updates under Windows Update, and then select from the list of updates.
Registry key verification

There is no registry key to validate the presence of this update.
Inclusion in future service packsThe update for this issue will be included in a future service pack or update rollup.


Deployment information

Installing the update
When you install this security update, the installer checks whether one or more of the files that are being updated on your system were previously updated by a Microsoft hotfix.

For more information about the terminology that appears in this Knowledge Base article, such as "hotfix," seeMicrosoft Knowledge Base article 824684.

This security update supports the following installation switches.

SwitchDescription
/?, /h, /helpDisplays help about supported switches.
/quietSuppresses the display of status or error messages.
/norestartWhen it is combined with/quiet, the system does not restart after the installation even if a restart is required to complete installation.
/warnrestart:<seconds>When it is combined with /quiet, the installer warns the user before it begins the restart.
/promptrestartWhen it is combined with /quiet, the installer prompts the user before it begins the restart.
/forcerestartWhen it is combined with /quiet, the installer forcibly closes applications and begins the restart.
/log:<file name>Enables logging to the specified file.
/extract:<destination>Extracts the package contents to the destination folder.
/uninstall /kb:<KB number>Uninstalls the security update.

Note
For more information about the Wusa.exe installer, see "Windows Update Stand-alone Installer" in the following Microsoft TechNet topic:
Verifying that the update was applied
Because there are several editions of Windows, the following steps may be different on your system. If they are different, see your product documentation to complete these steps.

Verifying the file version

  1. Click Start, and then type an update file name in the Start Search box.
  2. When the file appears under Programs, right-click the file name, and then click Properties.
  3. On the General tab, compare the file size to that in the file information tables that are provided in the Knowledge Base article.

    Note Depending on the edition of the operating system or the programs that are installed in your system, some files that are listed in the file information table may not be installed.
  4. You can also click the Details tab to compare information, such as file version and date changed, to that in the file information tables that are provided in the Knowledge Base article.

    Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update was applied. Also, in certain cases, files may be renamed during installation. If the file or version information does not exist, use one of the other available methods to verify update installation.
  5. You can also click the Previous Versions tab, and then compare file information for the earlier version of the file together with the file information for the new or updated version of the file.

How to obtain help and support for this security update

Help for installing updates: Support for Microsoft Update

Security solutions for IT professionals: TechNet Security Troubleshooting and Support

Help for protecting your Windows-based computer from viruses and malware: Virus Solution and Security Center

Local support according to your country: International Support
File Information

File hash information

File nameSHA1 hashSHA256 hash
Windows10.0-KB3194343-x64.msu (Windows Server 2016 TP5)3F767A3CC52BCA67528063AEA60A50BB761822DB575292C62B257FE9A5AFBBF4916D293E7673046423B6347699A0EEAE37399039
Windows10.0-KB3194343-x86.msu (Windows 10 Version 1607)BA9C6C780D74D806D2602060245829DA86BB559F4ECD8F4615A2D274B9D9B68653403709A1005CEAF62B7123E6DD4EE5D3E1C869
Windows10.0-KB3194343-x64.msu (Windows 10 Version 1607)140AC14C717811CAA35C6130A8663D371028799CD3C3B5556588DDA484D7D761E20CFB5DABF6F59060E20C7373DC1D57DA7F4C51
Windows10.0-KB3194343-x86.msu Windows 10 Version 1511D0EAC95D56D630F8746A09DDEF50B7230018E020DC34382EA6566272D7BDE0CDB3C333486F9B900C90393F8EDE150287B62E0B53
Windows10.0-KB3194343-x64.msu Windows 10 Version 15116E556F55BF94324BBE435DDF129B53DFE7CE54011C96F6EB8F8428CB563085301F0EA6795F1D32068AFBF9264592331FEE6F7C19
Windows10.0-KB3194343-x86.msu5DEAB91CD3DCDB8F5E8C1CD7D317A409BB06A6FCAE22E2E7B5ED8FA2E2A4A194F23A8DB603DE7B9EC82198BB28ACD889E48DEAD4
Windows10.0-KB3194343-x64.msuA751756BB2BE040273F9D1B1B61A7634610993BF6F32153F20A588BF600044CB3DE392DDF6348568F0CD179157B78C43420E74D7
Windows8.1-KB3194343-arm.msuF3E939417F1D00031AB6E3947599D7F5D9E9EBD93A66E1E78BB54B528BB3D8C201682B9678BFD5E968E38008F9D65FA46ED4D196
Windows8.1-KB3194343-x86.msu3B3CA0DD5318E000DDAF6BDF1A1CF45491B02690EC858394381BD1A84967F38D840BF7146873AE84D12609B3AFBB27A7ED8D388F
Windows8.1-KB3194343-x64.msuD3566481791EF6A5B0F9EF734456328E4A156D91C2646B5023C586FCACD80C18CD4E685D4DC44963A4372D603BE329BCA65241EC

File information

The English (United States) version of this software update installs files that have the attributes that are listed in the following tables.

Windows Server 2016 TP5 file information

For all supported x64-based versions
File nameFile versionFile sizeDateTimePlatform
Activex.vchNot applicable160,49403-Oct-201620:09Not applicable
Flash.ocx23.0.0.18528,198,39203-Oct-201620:09x64
Flashutil_activex.dll23.0.0.185689,14403-Oct-201620:09x64
Flashutil_activex.exe23.0.0.185934,39203-Oct-201620:09x64
Activex.vchNot applicable736,48603-Oct-201620:09Not applicable
Flash.ocx23.0.0.18521,787,64003-Oct-201620:09x86
Flashplayerapp.exe23.0.0.185828,40803-Oct-201620:09x86
Flashplayercplapp.cpl23.0.0.185176,63203-Oct-201620:09Not applicable
Flashutil_activex.dll23.0.0.185608,24803-Oct-201620:09x86
Flashutil_activex.exe23.0.0.1851,296,88803-Oct-201620:09x86

Windows 10 Version 1607 file information

For all supported x86-based versions
File nameFile versionFile sizeDateTimePlatform
Activex.vchNot applicable736,48603-Oct-201620:09Not applicable
Flash.ocx23.0.0.18521,787,64003-Oct-201620:09x86
Flashplayerapp.exe23.0.0.185828,40803-Oct-201620:09x86
Flashplayercplapp.cpl23.0.0.185176,63203-Oct-201620:09Not applicable
Flashutil_activex.dll23.0.0.185608,24803-Oct-201620:09x86
Flashutil_activex.exe23.0.0.1851,296,88803-Oct-201620:09x86
For all supported x64-based versions
File nameFile versionFile sizeDateTimePlatform
Activex.vchNot applicable160,49403-Oct-201620:09Not applicable
Flash.ocx23.0.0.18528,198,39203-Oct-201620:09x64
Flashutil_activex.dll23.0.0.185689,14403-Oct-201620:09x64
Flashutil_activex.exe23.0.0.185934,39203-Oct-201620:09x64
Activex.vchNot applicable736,48603-Oct-201620:09Not applicable
Flash.ocx23.0.0.18521,787,64003-Oct-201620:09x86
Flashplayerapp.exe23.0.0.185828,40803-Oct-201620:09x86
Flashplayercplapp.cpl23.0.0.185176,63203-Oct-201620:09Not applicable
Flashutil_activex.dll23.0.0.185608,24803-Oct-201620:09x86
Flashutil_activex.exe23.0.0.1851,296,88803-Oct-201620:09x86

Windows 10 Version 1511 file information

For all supported x86-based versions
File nameFile versionFile sizeDateTimePlatform
Activex.vchNot applicable736,48601-Oct-201600:23Not applicable
Flash.ocx23.0.0.18521,787,64001-Oct-201600:23x86
Flashplayerapp.exe23.0.0.185828,40801-Oct-201600:23x86
Flashplayercplapp.cpl23.0.0.185176,63201-Oct-201600:23Not applicable
Flashutil_activex.dll23.0.0.185608,24801-Oct-201600:23x86
Flashutil_activex.exe23.0.0.1851,296,88801-Oct-201600:23x86
For all supported x64-based versions
File nameFile versionFile sizeDateTimePlatform
Activex.vchNot applicable160,49401-Oct-201600:23Not applicable
Flash.ocx23.0.0.18528,198,39201-Oct-201600:23x64
Flashutil_activex.dll23.0.0.185689,14401-Oct-201600:23x64
Flashutil_activex.exe23.0.0.185934,39201-Oct-201600:23x64
Activex.vchNot applicable736,48601-Oct-201600:23Not applicable
Flash.ocx23.0.0.18521,787,64001-Oct-201600:23x86
Flashplayerapp.exe23.0.0.185828,40801-Oct-201600:23x86
Flashplayercplapp.cpl23.0.0.185176,63201-Oct-201600:23Not applicable
Flashutil_activex.dll23.0.0.185608,24801-Oct-201600:23x86
Flashutil_activex.exe23.0.0.1851,296,88801-Oct-201600:23x86

Windows 10 file information

For all supported x86-based versions
File nameFile versionFile sizeDateTimePlatform
Activex.vchNot applicable736,48601-Oct-201600:18Not applicable
Flash.ocx23.0.0.18521,787,64001-Oct-201600:18x86
Flashplayerapp.exe23.0.0.185828,40801-Oct-201600:18x86
Flashplayercplapp.cpl23.0.0.185176,63201-Oct-201600:18Not applicable
Flashutil_activex.dll23.0.0.185608,24801-Oct-201600:18x86
Flashutil_activex.exe23.0.0.1851,296,88801-Oct-201600:18x86
For all supported x64-based versions
File nameFile versionFile sizeDateTimePlatform
Activex.vchNot applicable160,49401-Oct-201600:18Not applicable
Flash.ocx23.0.0.18528,198,39201-Oct-201600:18x64
Flashutil_activex.dll23.0.0.185689,14401-Oct-201600:18x64
Flashutil_activex.exe23.0.0.185934,39201-Oct-201600:18x64
Activex.vchNot applicable736,48601-Oct-201600:18Not applicable
Flash.ocx23.0.0.18521,787,64001-Oct-201600:18x86
Flashplayerapp.exe23.0.0.185828,40801-Oct-201600:18x86
Flashplayercplapp.cpl23.0.0.185176,63201-Oct-201600:18Not applicable
Flashutil_activex.dll23.0.0.185608,24801-Oct-201600:18x86
Flashutil_activex.exe23.0.0.1851,296,88801-Oct-201600:18x86

Windows 8.1, Windows RT 8.1 and Windows Server 2012 R2 file information

Notes
  • The files that apply to a specific product, milestone (RTM, SPn), and service branch (LDR, GDR) can be identified by examining the file version numbers as shown in the following table:
    VersionProductMilestoneService branch
    6.3.960 0.16 xxxWindows RT 8.1, Windows 8.1, and Windows Server 2012 R2RTMGDR
    6.3.960 0.17 xxxWindows RT 8.1, Windows 8.1, and Windows Server 2012 R2RTMGDR
    6.3.960 0.18 xxxWindows RT 8.1, Windows 8.1, and Windows Server 2012 R2RTMGDR
  • GDR service branches contain only those fixes that are widely released to address widespread, critical issues. LDR service branches contain hotfixes in addition to widely released fixes.
  • The MANIFEST files (.manifest) and MUM files (.mum) that are installed are not listed.
For all supported ARM-based versions
File nameFile versionFile sizeDateTimePlatform
Flash.ocx23.0.0.18518,763,25601-Oct-201600:16Not applicable
Flashplayerapp.exe23.0.0.185809,46401-Oct-201600:16Not applicable
Flashplayercplapp.cpl23.0.0.185162,29601-Oct-201600:16Not applicable
Flashutil_activex.dll23.0.0.185538,61601-Oct-201600:16Not applicable
Flashutil_activex.exe23.0.0.185803,32001-Oct-201600:16Not applicable
For all supported x86-based versions
File nameFile versionFile sizeDateTimePlatform
Activex.vchNot applicable736,48601-Oct-201600:15Not applicable
Flash.ocx23.0.0.18521,787,64001-Oct-201600:15x86
Flashplayerapp.exe23.0.0.185828,40801-Oct-201600:15x86
Flashplayercplapp.cpl23.0.0.185176,63201-Oct-201600:15Not applicable
Flashutil_activex.dll23.0.0.185608,24801-Oct-201600:16x86
Flashutil_activex.exe23.0.0.1851,296,88801-Oct-201600:16x86
For all supported x64-based versions
File nameFile versionFile sizeDateTimePlatform
Activex.vchNot applicable160,49401-Oct-201600:16Not applicable
Flash.ocx23.0.0.18528,198,39201-Oct-201600:16x64
Flashutil_activex.dll23.0.0.185689,14401-Oct-201600:16x64
Flashutil_activex.exe23.0.0.185934,39201-Oct-201600:16x64
Activex.vchNot applicable736,48601-Oct-201600:15Not applicable
Flash.ocx23.0.0.18521,787,64001-Oct-201600:15x86
Flashplayerapp.exe23.0.0.185828,40801-Oct-201600:15x86
Flashplayercplapp.cpl23.0.0.185176,63201-Oct-201600:15Not applicable
Flashutil_activex.dll23.0.0.185608,24801-Oct-201600:16x86
Flashutil_activex.exe23.0.0.1851,296,88801-Oct-201600:16x86
Properties

Article ID: 3194343 - Last Review: 10/11/2016 15:52:00 - Revision: 1.0

Windows 10, Windows 10 Version 1511, Windows 10 Version 1607, Windows Server 2012 R2 Datacenter, Windows Server 2012 R2 Standard, Windows Server 2012 R2 Essentials, Windows Server 2012 R2 Foundation, Windows 8.1 Enterprise, Windows 8.1 Pro, Windows 8.1, Windows RT 8.1, Windows Server 2012 Datacenter, Windows Server 2012 Standard, Windows Server 2012 Essentials, Windows Server 2012 Foundation

  • atdownload kbbug kbexpertiseinter kbfix kbsecbulletin kbsecurity kbsecvulnerability KB3194343
Feedback