UEFI-based computers cannot start because the WDS PXE program requires ...
Cause. This problem occurs because the startup library-based applications, such as Wdfmgr.efi, use the graphics console incorrectly. Resolution. Hotfix information. A supported hotfix is available from Microsoft Support. However, this hotfix is intended to correct only the problem that is described in this article.
"TFTP download failed" error message during a PXE boot on a client ...
Fixes a "TFTP download failed" error message. You receive this error message when you perform a PXE boot on a client computer that connects to a Windows Deployment Services server that is running Windows Server 2008 R2.
Boot program fails when you try to install Windows by using a WDS ...
Symptoms. Assume that you start a Pre-Boot Execution Environment (PXE) Extensible Firmware Interface (EFI)-based client computer, and then you connect it to a Windows Deployment Service (WDS) server that is running Windows Server 2008 R2. The client computer has a network adapter that does not support Multicast.
TPM lockout occurs unexpectedly in Windows 8.1 or Windows RT 8.1
Winload.efi. 6.3.9600.18006. 1,388,936. 06-Aug-2015. 18:23. Not applicable. Winload.exe. 6.3.9600.18006. 1,277,888. 06-Aug-2015. 18:23. x86. Wdsmgfw.efi. 6.3.9600.18006. 1,255,752. 06-Aug-2015. 18:40. Not applicable. Bootmgfw.efi. 6.3.9600.18006. 1,357,128. 06-Aug-2015. 18:24. Not applicable. Bootmgr.efi. 6.3.9600.18006. 1,352,536. 06-Aug-2015 ...
"Boot failed" error when you start a UEFI-enabled computer from a 64 ...
Download this hotfix, and then run the following command to extract the Windows6.1-KB982929-x64.msu file into the temporary folder: 417821_intl_x64_zip.exe –x. Use the following commands to view each store-keeping unit (SKU) or index in the .wim file: Dism /Get-WimInfo /WimFile:<pathto>boot.wim.
"c0000225" or "c0000017" error occurs when you try to start a Windows ...
Bootmgfw.efi. 6.1.7600.20738. 672,128. 19-Jun-2010. 07:05. Not applicable. Wdsmgfw.efi. 6.1.7600.20738. 531,968. 19-Jun-2010. 04:11. Not applicable. Setbcdlocale.dll. 6.1.7600.20738. 62,976. 19-Jun-2010. 06:53. x64. Winload.efi. 6.1.7600.20738. 642,440. 19-Jun-2010. 07:05. Not applicable. Winload.exe. 6.1.7600.20738. 604,488. 19-Jun-2010. 06:58 ...
A FIPS-compliant recovery password cannot be saved to AD DS for ...
To do this, run the following command: Dism /Mount-Wim /WimFile: path_of_winre.wim /index:1 /MountDir:E:\Recovery. Notes. To find the WIM file, run the following command: reagentc /info. Note On legacy computers, you can find the WIM file in the following folder: C:\Windows\System32\Recovery\Winre.wim.
基于 UEFI 的计算机无法启动，因为 WDS PXE 程序要求您按 f12 键 - Microsoft 支持
在这种情况下，基于 UEFI 的计算机无法启动，因为 WDS 预启动执行环境 (PXE) 程序要求您按 f12 键以基于文本的模式继续网络启动。 原因. 发生此问题是因为启动基于库的应用程序，例如 Wdfmgr.efi，不正确地使用图形控制台。 解决方案. 修补程序信息. 受支持的修补程序可从 Microsoft 支持。 然而，此修补程序仅用于解决本文中描述的问题。 此修复程序仅适用于遇到本文中描述的问题的系统。 此修补程序可能会接受进一步的测试。 因此，如果这个问题没有对您造成严重的影响，我们建议您等待包含此修复程序的下一个软件更新。 如果此修复程序可供下载，则在此知识库文章的顶部会出现“修补程序下载可用”部分。
Komputer berbasis UEFI tidak dapat memulai karena program WDS PXE ...
Penyebab. Masalah ini terjadi karena startup Perpustakaan aplikasi berbasis, seperti Wdfmgr.efi, menggunakan konsol grafis secara tidak benar. Pemecahan masalah. Informasi Hotfix. Tersedia hotfix yang didukung dari Microsoft Support. Namun, hotfix ini ditujukan untuk memperbaiki masalah yang dijelaskan di artikel ini.
Počítače s rozhraním UEFI nelze spustit, protože program WDS PXE ...
Příčina. K tomuto problému dochází, protože spuštění založený na knihovně aplikace, jako je Wdfmgr.efi, použijte konzolu grafiky nesprávně. Řešení. Informace o opravě hotfix. Podporovaná oprava hotfix je k dispozici z Microsoft Support. Tato oprava hotfix je však určena pouze problému popsanému v tomto článku.