This article applies to Microsoft Dynamics NAV for all regions.
Consider the following scenario in Microsoft Dynamics NAV 5.0 Service Pack 1 (SP1):
- You set the Reservation parameter to "Always" for an item.
- You have a sales order for the item. Additionally, the ordered quantity for the item is more than the available quantity in the inventory.
In this scenario, when you create a pick by using the available quantity for the item in the pick worksheet, you receive the following error message:
Note
Nothing to handle
Symptoms
Hotfix information
A supported hotfix is now available from Microsoft. However, it is only intended to correct the problem that is described in this article. Apply it only to systems that are experiencing this specific problem. This hotfix may receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next Microsoft Dynamics NAV 5.0 service pack or the next Microsoft Dynamics NAV version that contains this hotfix.
Note In special cases, charges that are ordinarily incurred for support calls may be canceled if a Technical Support Professional for Microsoft Dynamics and related products determines that a specific update will resolve your problem. The usual support costs will apply to additional support questions and issues that do not qualify for the specific update in question.
Resolution
Installation information
Microsoft provides programming examples for illustration only, without warranty either expressed or implied. This includes, but is not limited to, the implied warranties of merchantability or fitness for a particular purpose. This article assumes that you are familiar with the programming language that is being demonstrated and with the tools that are used to create and to debug procedures. Microsoft support engineers can help explain the functionality of a particular procedure, but they will not modify these examples to provide added functionality or construct procedures to meet your specific requirements.
Note Before you install this hotfix, verify that all Microsoft Navision client users are logged off the system. This includes Microsoft Navision Application Services (NAS) client users. You should be the only client user who is logged on when you implement this hotfix.
To implement this hotfix, you must have a developer license.
We recommend that the user account in the Windows Logins window or in the Database Logins window be assigned the "SUPER" role ID. If the user account cannot be assigned the "SUPER" role ID, you must verify that the user account has the following permissions:
- The Modify permission for the object that you will be changing.
- The Execute permission for the System Object ID 5210 object and for the System Object ID 9015 object.
Note You do not have to have rights to the data stores unless you have to perform data repair.
Code changes
Note Always test code fixes in a controlled environment before you apply the fixes to your production computers.
To resolve this problem, follow these steps:
Change the code in the Keys in the Prod. Order Component table (5407) as follows:
Existing code
... { ;Status,Prod. Order No.,Routing Link Code,Flushing Method } { ;Status,Prod. Order No.,Location Code } { ;Item No.,Variant Code,Location Code,Status,Due Date; // Delete the following line. SumIndexFields=Expected Quantity,Remaining Qty. (Base),Cost Amount,Overhead Amount; // End of the deleted line. MaintainSIFTIndex=No } { ;Status,Prod. Order No.,Prod. Order Line No.,Item Low-Level Code; MaintainSQLIndex=No } ...Replacement code
... { ;Status,Prod. Order No.,Routing Link Code,Flushing Method } { ;Status,Prod. Order No.,Location Code } { ;Item No.,Variant Code,Location Code,Status,Due Date; // Add the following line. SumIndexFields=Expected Quantity,Remaining Qty. (Base),Cost Amount,Overhead Amount,Qty. Picked (Base); // End of the added line. MaintainSIFTIndex=No } { ;Status,Prod. Order No.,Prod. Order Line No.,Item Low-Level Code; MaintainSQLIndex=No } ...Change the code in the Fields in the Warehouse Activity Line table (5767) as follows:
Existing code
... ERROR(Text015); IF "Bin Code" <> '' THEN BEGIN CreatePick.CheckReservation( // Delete the following lines. "Location Code","Source Type","Source Subtype","Source No.", "Source Line No.","Source Subline No.","Qty. per Unit of Measure","Qty. to Handle (Base)"); // End of the deleted lines. CreatePick.GetReservationStatus(ReservationExists,ReservedForItemLedgEntry); IF ReservationExists AND NOT ReservedForItemLedgEntry THEN ERROR(Text016,"Item No."); ...Replacement code
... ERROR(Text015); IF "Bin Code" <> '' THEN BEGIN CreatePick.CheckReservation( // Add the following lines. AvailableQty,"Location Code","Source Type","Source Subtype","Source No.", "Source Line No.","Source Subline No.","Qty. per Unit of Measure", "Qty. to Handle","Qty. to Handle (Base)"); // End of the added lines. CreatePick.GetReservationStatus(ReservationExists,ReservedForItemLedgEntry); IF ReservationExists AND NOT ReservedForItemLedgEntry THEN ERROR(Text016,"Item No."); ...Change the code in the Documentation in the Whse. Management codeunit (5775) as follows:
Existing code
... ERROR(Text000); END; // Delete the following line. BEGIN // End of the deleted line. END. } } ...Replacement code
... ERROR(Text000); END; // Add the following lines. PROCEDURE GetOutboundDocLineQtyOtsdg@3(SourceType@1006 : Integer;SourceSubType@1005 : '0,1,2,3,4,5,6,7,8,9,10';SourceNo@1004 : Code[20];SourceLineNo@1003 : Integer;SourceSubLineNo@1002 : Integer;VAR QtyOutstanding@1001 : Decimal;VAR QtyBaseOutstanding@1000 : Decimal); VAR WhseShptLine@1009 : Record 7321; BEGIN WhseShptLine.SETCURRENTKEY("Source Type"); WhseShptLine.SETRANGE("Source Type",SourceType); WhseShptLine.SETRANGE("Source Subtype",SourceSubType); WhseShptLine.SETRANGE("Source No.",SourceNo); WhseShptLine.SETRANGE("Source Line No.",SourceLineNo); IF WhseShptLine.FINDSET THEN BEGIN WhseShptLine.CALCSUMS("Qty. Outstanding (Base)","Qty. Outstanding"); QtyOutstanding := WhseShptLine."Qty. Outstanding"; QtyBaseOutstanding := WhseShptLine."Qty. Outstanding (Base)"; END ELSE GetSrcDocLineQtyOutstanding(SourceType,SourceSubType,SourceNo, SourceLineNo,SourceSubLineNo,QtyOutstanding,QtyBaseOutstanding); END; PROCEDURE GetSrcDocLineQtyOutstanding@7(SourceType@1006 : Integer;SourceSubType@1005 : '0,1,2,3,4,5,6,7,8,9,10';SourceNo@1004 : Code[20];SourceLineNo@1003 : Integer;SourceSubLineNo@1002 : Integer;VAR QtyOutstanding@1001 : Decimal;VAR QtyBaseOutstanding@1000 : Decimal); VAR SalesLine@1008 : Record 37; PurchaseLine@1009 : Record 39; TransferLine@1010 : Record 5741; ServiceLine@1012 : Record 5902; ProdOrderComp@1013 : Record 5407; ProdOrderLine@1014 : Record 5406; BEGIN CASE SourceType OF DATABASE::"Sales Line": IF SalesLine.GET(SourceSubType,SourceNo,SourceLineNo) THEN BEGIN QtyOutstanding := SalesLine."Outstanding Quantity"; QtyBaseOutstanding := SalesLine."Outstanding Qty. (Base)"; END; DATABASE::"Purchase Line": IF PurchaseLine.GET(SourceSubType,SourceNo,SourceLineNo) THEN BEGIN QtyOutstanding := PurchaseLine."Outstanding Quantity"; QtyBaseOutstanding := PurchaseLine."Outstanding Qty. (Base)"; END; DATABASE::"Transfer Line": IF TransferLine.GET(SourceNo,SourceLineNo) THEN CASE SourceSubType OF 0: // Direction = Outbound BEGIN QtyOutstanding := ROUND(TransferLine."Whse Outbnd. Otsdg. Qty (Base)" / (QtyOutstanding / QtyBaseOutstanding),0.00001); QtyBaseOutstanding := TransferLine."Whse Outbnd. Otsdg. Qty (Base)"; END; 1: // Direction = Inbound BEGIN QtyOutstanding := ROUND(TransferLine."Whse. Inbnd. Otsdg. Qty (Base)" / (QtyOutstanding / QtyBaseOutstanding),0.00001); QtyBaseOutstanding := TransferLine."Whse. Inbnd. Otsdg. Qty (Base)"; END; END; DATABASE::"Service Line": IF ServiceLine.GET(SourceSubType,SourceNo,SourceLineNo) THEN BEGIN QtyOutstanding := ServiceLine."Outstanding Quantity"; QtyBaseOutstanding := ServiceLine."Outstanding Qty. (Base)"; END; DATABASE::"Prod. Order Component": IF ProdOrderComp.GET(SourceSubType,SourceNo,SourceLineNo,SourceSubLineNo) THEN BEGIN QtyOutstanding := ProdOrderComp."Remaining Quantity"; QtyBaseOutstanding := ProdOrderComp."Remaining Qty. (Base)"; END; DATABASE::"Prod. Order Line": IF ProdOrderLine.GET(SourceSubType,SourceNo,SourceLineNo) THEN BEGIN QtyOutstanding := ProdOrderLine."Remaining Quantity"; QtyBaseOutstanding := ProdOrderLine."Remaining Qty. (Base)"; END; ELSE BEGIN QtyOutstanding := 0; QtyBaseOutstanding := 0; END; END; END; BEGIN // End of the added lines. END. } } ...Change the code in the CalcLineReservedQtyonInvt function in the WMS Management codeunit (7302) as follows:
Existing code
... ReservEntry2.SETRANGE("Lot No.",LotNo); IF ReservEntry2.FIND('-') THEN REPEAT // Delete the following line. ReservQtyonInvt := ReservQtyonInvt + ReservEntry2."Quantity (Base)"; // End of the deleted line. UNTIL ReservEntry2.NEXT = 0; UNTIL ReservEntry.NEXT = 0; EXIT(ReservQtyonInvt); ...Replacement code
... ReservEntry2.SETRANGE("Lot No.",LotNo); IF ReservEntry2.FIND('-') THEN REPEAT // Add the following line. ReservQtyonInvt := ReservQtyonInvt + ReservEntry2."Quantity (Base)" - ReservEntry2."Reserved Pick & Ship Qty."; // End of the added line. UNTIL ReservEntry2.NEXT = 0; UNTIL ReservEntry.NEXT = 0; EXIT(ReservQtyonInvt); ...Change the code in the CreateTempLine function in the Create Pick codeunit (7312) as follows:
Existing code 1
... RemQtyToPickBase@1000000002 : Decimal; QtyToPickBase@1000000001 : Decimal; QtyToTrackBase@1009 : Decimal; // Delete the following lines. BEGIN CheckReservation( LocationCode,SourceType,SourceSubType,SourceNo,SourceLineNo,SourceSubLineNo, QtyPerUnitofMeasure,TotalQtytoPick); // End of the deleted lines. RemQtyToPick := TotalQtytoPick; RemQtyToPickBase := TotalQtytoPickBase; ItemTrackingMgt.CheckWhseItemTrkgSetup(ItemNo,SNRequired,LNRequired,FALSE); ...Replacement code 1
... RemQtyToPickBase@1000000002 : Decimal; QtyToPickBase@1000000001 : Decimal; QtyToTrackBase@1009 : Decimal; // Add the following lines. QtyBaseMaxAvailToPick@1014 : Decimal; BEGIN GetLocation(LocationCode); IF Location."Directed Put-away and Pick" THEN QtyBaseMaxAvailToPick := // Total qty (excl. Receive bin content) that are not assigned to any activity/ order CalcTotalQtyOnBinType('',LocationCode,ItemNo,VariantCode) - CalcTotalQtyAssgndOnWhse(LocationCode,ItemNo,VariantCode) + CalcTotalQtyAssgndOnWhseAct(TempWhseActivLine."Activity Type"::"Put-away",LocationCode,ItemNo,VariantCode) - CalcTotalQtyOnBinType(GetBinTypeFilter(0),LocationCode,ItemNo,VariantCode) // Receive area ELSE QtyBaseMaxAvailToPick := CalcAvailableQty(ItemNo,VariantCode,1) - CalcPickQtyAssigned(LocationCode,ItemNo,VariantCode,FromBinCode,TempWhseItemTrkgLine); CheckReservation( QtyBaseMaxAvailToPick,LocationCode,SourceType,SourceSubType,SourceNo,SourceLineNo,SourceSubLineNo, QtyPerUnitofMeasure,TotalQtytoPick,TotalQtytoPickBase); // End of the added lines. RemQtyToPick := TotalQtytoPick; RemQtyToPickBase := TotalQtytoPickBase; ItemTrackingMgt.CheckWhseItemTrkgSetup(ItemNo,SNRequired,LNRequired,FALSE); ...Existing code 2
... CreateTempItemTrkgLines(ItemNo,VariantCode,QtyToTrackBase); END; // Delete the following line. IF TotalQtytoPick <>0 THEN BEGIN // End of the deleted line. TempWhseItemTrkgLine.RESET; TempWhseItemTrkgLine.SETFILTER("Qty. to Handle",'<> 0'); IF TempWhseItemTrkgLine.FIND('-') THEN BEGIN ...Replacement code 2
... CreateTempItemTrkgLines(ItemNo,VariantCode,QtyToTrackBase); END; // Add the following line. IF TotalQtytoPickBase <> 0 THEN BEGIN // End of the added line. TempWhseItemTrkgLine.RESET; TempWhseItemTrkgLine.SETFILTER("Qty. to Handle",'<>0'); IF TempWhseItemTrkgLine.FIND('-') THEN BEGIN ...Change the code in the CheckReservation function in the Create Pick codeunit (7312) as follows:
Existing code 1
... END; END; // Delete the following line. PROCEDURE CheckReservation@45(LocationCode@1007 : Code[10];SourceType@1005 : Integer;SourceSubType@1004 : '0,1,2,3,4,5,6,7,8,9,10';SourceNo@1003 : Code[20];SourceLineNo@1002 : Integer;SourceSubLineNo@1001 : Integer;QtyPerUnitofMeasure@1000 : Decimal;VAR Quantity@1006 : Decimal); // End of the deleted line. VAR ReservEntry@1010 : Record 337; ReservEntry2@1011 : Record 337; ...Replacement code 1
... END; END; // Add the following line. PROCEDURE CheckReservation@45(QtyBaseAvailToPick@1009 : Decimal;LocationCode@1007 : Code[10];SourceType@1005 : Integer;SourceSubType@1004 : '0,1,2,3,4,5,6,7,8,9,10';SourceNo@1003 : Code[20];SourceLineNo@1002 : Integer;SourceSubLineNo@1001 : Integer;QtyPerUnitofMeasure@1000 : Decimal;VAR Quant ity@1006 : Decimal;VAR QuantityBase@1008 : Decimal); // End of the added line. VAR ReservEntry@1010 : Record 337; ReservEntry2@1011 : Record 337; ...Existing code 2
... ReservEntry@1010 : Record 337; ReservEntry2@1011 : Record 337; Quantity2@1012 : Decimal; // Delete the following line. BEGIN // End of the deleted line. ReservEntry.SETCURRENTKEY( "Source ID","Source Ref. No.","Source Type","Source Subtype", "Source Batch Name","Source Prod. Order Line","Reservation Status"); ...Replacement code 2
... ReservEntry@1010 : Record 337; ReservEntry2@1011 : Record 337; Quantity2@1012 : Decimal; // Add the following lines. QtyBaseResvdNotOnILE@1018 : Decimal; QtyResvdNotOnILE@1013 : Decimal; WhseManagement@1014 : Codeunit 5775; SrcDocQtyBaseToBeFilledByInvt@1015 : Decimal; SrcDocQtyToBeFilledByInvt@1016 : Decimal; QuantityBase2@1019 : Decimal; BEGIN ReservationExists := FALSE; ReservedForItemLedgEntry := FALSE; Quantity2 := Quantity; QuantityBase2 := QuantityBase; // End of the added lines. ReservEntry.SETCURRENTKEY( "Source ID","Source Ref. No.","Source Type","Source Subtype", "Source Batch Name","Source Prod. Order Line","Reservation Status"); ...Existing code 3
... ReservEntry.SETRANGE("Reservation Status",ReservEntry."Reservation Status"::Reservation); IF ReservEntry.FIND('-') THEN BEGIN ReservationExists := TRUE; // Delete the following line. Quantity2 := Quantity; // End of the deleted line. Quantity := Quantity * QtyPerUnitofMeasure; REPEAT IF ReservEntry2.GET(ReservEntry."Entry No.",NOT ReservEntry.Positive) AND ...Replacement code 3
... ReservEntry.SETRANGE("Reservation Status",ReservEntry."Reservation Status"::Reservation); IF ReservEntry.FIND('-') THEN BEGIN ReservationExists := TRUE; Quantity := Quantity * QtyPerUnitofMeasure; REPEAT IF ReservEntry2.GET(ReservEntry."Entry No.",NOT ReservEntry.Positive) AND ...Existing code 4
... REPEAT IF ReservEntry2.GET(ReservEntry."Entry No.",NOT ReservEntry.Positive) AND (ReservEntry2."Source Type" <> DATABASE::"Item Ledger Entry") // Delete the following lines. THEN Quantity := Quantity - ReservEntry2."Quantity (Base)"; UNTIL ReservEntry.NEXT = 0; IF Quantity <0 THEN Quantity := 0; Quantity := ROUND(Quantity / QtyPerUnitofMeasure,0.00001); IF Quantity = 0 THEN BEGIN // End of the deleted lines. GetLocation(LocationCode); IF Location."Always Create Pick Line" THEN BEGIN ReservedForItemLedgEntry := FALSE; ...Replacement code 4
... REPEAT IF ReservEntry2.GET(ReservEntry."Entry No.",NOT ReservEntry.Positive) AND (ReservEntry2."Source Type" <> DATABASE::"Item Ledger Entry") // Add the following lines. THEN BEGIN QtyBaseResvdNotOnILE += ReservEntry2."Quantity (Base)"; QtyResvdNotOnILE += ReservEntry2.Quantity; END; UNTIL ReservEntry.NEXT = 0; WhseManagement.GetOutboundDocLineQtyOtsdg(SourceType,SourceSubType, SourceNo,SourceLineNo,SourceSubLineNo,SrcDocQtyToBeFilledByInvt,SrcDocQtyBaseToBeFilledByInvt); SrcDocQtyBaseToBeFilledByInvt := SrcDocQtyBaseToBeFilledByInvt - QtyBaseResvdNotOnILE; SrcDocQtyToBeFilledByInvt := SrcDocQtyToBeFilledByInvt - QtyResvdNotOnILE; IF QuantityBase >SrcDocQtyBaseToBeFilledByInvt THEN BEGIN QuantityBase := SrcDocQtyBaseToBeFilledByInvt; Quantity := SrcDocQtyToBeFilledByInvt; END; IF QuantityBase <=SrcDocQtyBaseToBeFilledByInvt THEN IF QuantityBase >QtyBaseAvailToPick THEN BEGIN QuantityBase := QtyBaseAvailToPick; Quantity := ROUND(QtyBaseAvailToPick / QtyPerUnitofMeasure,0.00001); END; IF QuantityBase = 0 THEN BEGIN // End of the added lines. GetLocation(LocationCode); IF Location."Always Create Pick Line" THEN BEGIN ReservedForItemLedgEntry := FALSE; ...Existing code 5
... IF Location."Always Create Pick Line" THEN BEGIN ReservedForItemLedgEntry := FALSE; Quantity := Quantity2; END; END ELSE ReservedForItemLedgEntry := TRUE; ...Replacement code 5
... IF Location."Always Create Pick Line" THEN BEGIN ReservedForItemLedgEntry := FALSE; Quantity := Quantity2; // Add the following line. QuantityBase := QuantityBase2; // End of the added line. END; END ELSE ReservedForItemLedgEntry := TRUE; ...Change the code in the Documentation function in the Create Pick codeunit (7312) as follows:
Existing code
... EXIT(xReservedQty > Item."Reserved Qty. on Inventory"); END; // Delete the following line. BEGIN // End of the deleted line. END. } } ...Replacement code
... EXIT(xReservedQty >Item."Reserved Qty. on Inventory"); END; // Add the following lines. PROCEDURE CalcTotalQtyAssgndOnWhse@1102601005(LocationCode@1002 : Code[10];ItemNo@1003 : Code[20];VariantCode@1004 : Code[10]) : Decimal; VAR WhseShipmentLine@1010 : Record 7321; ProdOrderComp@1011 : Record 5407; QtyAssgndToWhseAct@1012 : Decimal; QtyAssgndToShipment@1013 : Decimal; QtyAssgndToProdComp@1014 : Decimal; BEGIN QtyAssgndToWhseAct += CalcTotalQtyAssgndOnWhseAct(TempWhseActivLine."Activity Type"::" ",LocationCode,ItemNo,VariantCode); QtyAssgndToWhseAct += CalcTotalQtyAssgndOnWhseAct(TempWhseActivLine."Activity Type"::"Put-away",LocationCode,ItemNo,VariantCode); QtyAssgndToWhseAct += CalcTotalQtyAssgndOnWhseAct(TempWhseActivLine."Activity Type"::Pick,LocationCode,ItemNo,VariantCode); QtyAssgndToWhseAct += CalcTotalQtyAssgndOnWhseAct(TempWhseActivLine."Activity Type"::Movement,LocationCode,ItemNo,VariantCode); QtyAssgndToWhseAct += CalcTotalQtyAssgndOnWhseAct(TempWhseActivLine."Activity Type"::"Invt. Put-away",LocationCode,ItemNo,VariantCode); QtyAssgndToWhseAct += CalcTotalQtyAssgndOnWhseAct(TempWhseActivLine."Activity Type"::"Invt. Pick",LocationCode,ItemNo,VariantCode); WITH WhseShipmentLine DO BEGIN SETCURRENTKEY("Item No.","Location Code","Variant Code","Due Date"); SETRANGE("Location Code",LocationCode); SETRANGE("Item No.",ItemNo); SETRANGE("Variant Code",VariantCode); CALCSUMS("Qty. Picked (Base)"); QtyAssgndToShipment := "Qty. Picked (Base)"; END; WITH ProdOrderComp DO BEGIN SETCURRENTKEY("Item No.","Variant Code","Location Code",Status,"Due Date"); SETRANGE("Location Code",LocationCode); SETRANGE("Item No.",ItemNo); SETRANGE("Variant Code",VariantCode); CALCSUMS("Qty. Picked (Base)"); QtyAssgndToProdComp := "Qty. Picked (Base)"; END; EXIT(QtyAssgndToWhseAct + QtyAssgndToShipment + QtyAssgndToProdComp); END; PROCEDURE CalcTotalQtyAssgndOnWhseAct@1102601006(ActivityType@1003 : Option;LocationCode@1004 : Code[10];ItemNo@1005 : Code[20];VariantCode@1006 : Code[10]) : Decimal; VAR WhseActivLine@1002 : Record 5767; BEGIN WITH WhseActivLine DO BEGIN SETCURRENTKEY( "Item No.","Location Code","Activity Type","Bin Type Code", "Unit of Measure Code","Variant Code","Breakbulk No.","Action Type"); SETRANGE("Location Code",LocationCode); SETRANGE("Item No.",ItemNo); SETRANGE("Variant Code",VariantCode); SETRANGE("Activity Type",ActivityType); SETRANGE("Breakbulk No.",0); SETFILTER("Action Type",'%1|%2',"Action Type"::" ","Action Type"::Take); CALCSUMS("Qty. Outstanding (Base)"); EXIT("Qty. Outstanding (Base)"); END; END; PROCEDURE CalcTotalQtyOnBinType@1102601007(BinTypeFilter@1004 : Text[1024];LocationCode@1003 : Code[10];ItemNo@1002 : Code[10];VariantCode@1001 : Code[10]) : Decimal; VAR WhseEntry@1000 : Record 7312; BEGIN WITH WhseEntry DO BEGIN SETCURRENTKEY("Item No.","Location Code","Variant Code","Bin Type Code"); SETRANGE("Item No.",ItemNo); SETRANGE("Location Code",LocationCode); SETRANGE("Variant Code",VariantCode); IF BinTypeFilter <>'' THEN SETFILTER("Bin Type Code",BinTypeFilter); CALCSUMS("Qty. (Base)"); EXIT("Qty. (Base)"); END; END; // End of the added lines. } } ...
Prerequisites
You must have the in the Microsoft Dynamics NAV 5.0 SP1 installed to apply this hotfix.
Removal information
You cannot remove this hotfix.
Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the "Applies to" section.
Status
Note This is a "FAST PUBLISH" article created directly from within the Microsoft support organization. The information contained herein is provided as-is in response to emerging issues. As a result of the speed in making it available, the materials may include typographical errors and may be revised at any time without notice. See Terms of Use for other considerations.