Symptoms

Windows 7 clients experience a three to five second delay in obtaining an IP address through Dynamic Host Configuration Protocol (DHCP) at restart. This behavior occurs when the clients are DHCP-enabled and domain-joined. This results in Netlogon event ID 5719 and Group Policy event ID 1129. You may experience this issue if the Windows 7 DHCP client is communicating with a Microsoft Windows-based DHCP Server through a non-Microsoft Relay Agent, such as a Layer 3 network switch.

DHCP-Client Operational logs, if it is enabled, will record event ID 50024 at restart time. This indicates that a DHCP Request time-out occurred.

The issue does not occur if the Windows 7 DHCP client communicates with a Microsoft Windows DHCP Server through a Microsoft relay agent.

When this issue occurs, an event that resembles the following is logged in the System event log:

An event that resembles the following is logged in the System log:

An event that resembles the following is logged in the Microsoft-Windows-DHCP-Client Applications and Services Operational log:

Cause

As the Windows 7 client starts, it sends a DHCP-REQUEST or DHCP-DISCOVER packet together with a Broadcast Flag of 0. Then, the DHCP server responds with a Unicast DHCP-ACK or DHCP-OFFER packet. This response is dropped by the boot-time firewall policy.

After the time-out period of three to five seconds, the DHCP client retries and obtains an IPv4 address. This occurs because the computer has completely started, and Windows Firewall has taken over the filtering from the boot-time policy. Windows Firewall enables the DHCP Unicast response. In the meantime, the Netlogon service starts and records an event ID 5719 because the service cannot locate the domain.

Resolution

Hotfix information

A supported hotfix is available from Microsoft. However, this hotfix is intended to correct only the problem that is described in this article. Apply this hotfix only to systems that are experiencing the problem described in this article. This hotfix might receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next software update that contains this hotfix.

If the hotfix is available for download, there is a "Hotfix download available" section at the top of this Knowledge Base article. If this section does not appear, contact Microsoft Customer Service and Support to obtain the hotfix.

Note If additional issues occur or if any troubleshooting is required, you might have to create a separate service request. The usual support costs will apply to additional support questions and issues that do not qualify for this specific hotfix. For a complete list of Microsoft Customer Service and Support telephone numbers or to create a separate service request, visit the following Microsoft website:

http://support.microsoft.com/contactus/?ws=supportNote The "Hotfix download available" form displays the languages for which the hotfix is available. If you do not see your language, it is because a hotfix is not available for that language.

Prerequisites

To apply this hotfix, you must be running one of the following operating systems:

  • Windows 7

  • Windows 7 Service Pack 1 (SP1)

  • Windows Server 2008 R2

  • Windows Server 2008 R2 Service Pack 1 (SP1)

For more information about how to obtain a Windows 7 or Windows Server 2008 R2 service pack, click the following article number to view the article in the Microsoft Knowledge Base:

976932 Information about Service Pack 1 for Windows 7 and for Windows Server 2008 R2

Registry information

To use the hotfix in this package, you do not have to make any changes to the registry.

Restart requirement

You must restart the computer after you apply this hotfix.

Hotfix replacement information

This hotfix does not replace a previously released hotfix.

The global version of this hotfix installs files that have the attributes that are listed in the following tables. The dates and the times for these files are listed in Coordinated Universal Time (UTC). The dates and the times for these files on your local computer are displayed in your local time together with your current daylight saving time (DST) bias. Additionally, the dates and the times may change when you perform certain operations on the files.

Windows 7 and Windows Server 2008 R2 file information notes

  • The files that apply to a specific product, milestone (RTM, SPn), and service branch (LDR, GDR) can be identified by examining the file version numbers as shown in the following table:

    Version

    Product

    Milestone

    Service branch

    6.1.760
    0.17xxx

    Windows 7 and Windows Server 2008 R2

    RTM

    GDR

    6.1.760
    0.21xxx

    Windows 7 and Windows Server 2008 R2

    RTM

    LDR

    6.1.760
    1.17xxx

    Windows 7 and Windows Server 2008 R2

    SP1

    GDR

    6.1.760
    1.22xxx

    Windows 7 and Windows Server 2008 R2

    SP1

    LDR

  • GDR service branches contain only those fixes that are widely released to address widespread, extremely important issues. LDR service branches contain hotfixes in addition to widely released fixes.

  • The MANIFEST files (.manifest) and the MUM files (.mum) that are installed for each environment are listed separately in the "Additional file information for Windows Server 2008 R2 and for Windows 7" section. MUM and MANIFEST files, and the associated security catalog (.cat) files, are extremely important to maintain the state of the updated components. The security catalog files, for which the attributes are not listed, are signed with a Microsoft digital signature.

For all supported x86-based versions of Windows 7

File name

File version

File size

Date

Time

Platform

Dhcpcore.dll

6.1.7600.17211

252,928

10-Jan-2013

04:50

x86

Dhcpcore.dll

6.1.7600.21421

255,488

10-Jan-2013

04:40

x86

Dhcpcore6.dll

6.1.7600.21421

192,000

10-Jan-2013

04:40

x86

Dhcpcore.dll

6.1.7601.18048

253,952

10-Jan-2013

04:42

x86

Dhcpcore6.dll

6.1.7601.17970

193,536

09-Oct-2012

17:40

x86

Dhcpcsvc6.dll

6.1.7601.17970

44,032

09-Oct-2012

17:40

x86

Dhcpcore.dll

6.1.7601.22214

256,000

10-Jan-2013

04:46

x86

Dhcpcore6.dll

6.1.7601.22214

194,048

10-Jan-2013

04:46

x86

Dhcpcsvc6.dll

6.1.7601.22214

43,520

10-Jan-2013

04:46

x86

Netio.sys

6.1.7601.17939

240,496

22-Aug-2012

17:16

x86

Netio.sys

6.1.7601.22214

240,472

10-Jan-2013

04:58

x86

Fwpkclnt.sys

6.1.7600.17211

187,224

10-Jan-2013

05:00

x86

Tcpip.sys

6.1.7600.17211

1,287,512

10-Jan-2013

05:00

x86

Fwpkclnt.sys

6.1.7600.21421

187,224

10-Jan-2013

04:51

x86

Tcpip.sys

6.1.7600.21421

1,303,896

10-Jan-2013

04:51

x86

Fwpkclnt.sys

6.1.7601.18048

187,752

10-Jan-2013

04:58

x86

Tcpip.sys

6.1.7601.18048

1,293,672

10-Jan-2013

04:58

x86

Fwpkclnt.sys

6.1.7601.22214

187,736

10-Jan-2013

04:58

x86

Tcpip.sys

6.1.7601.22214

1,308,520

10-Jan-2013

04:58

x86

For all supported x64-based versions of Windows 7 and of Windows Server 2008 R2

File name

File version

File size

Date

Time

Platform

Dhcpcore.dll

6.1.7600.17211

314,368

10-Jan-2013

05:30

x64

Dhcpcore.dll

6.1.7600.21421

314,880

10-Jan-2013

05:44

x64

Dhcpcore6.dll

6.1.7600.21421

223,232

10-Jan-2013

05:44

x64

Dhcpcore.dll

6.1.7601.18048

317,440

10-Jan-2013

05:45

x64

Dhcpcore6.dll

6.1.7601.17970

226,816

09-Oct-2012

18:17

x64

Dhcpcsvc6.dll

6.1.7601.17970

55,296

09-Oct-2012

18:17

x64

Dhcpcore.dll

6.1.7601.22214

317,952

10-Jan-2013

05:35

x64

Dhcpcore6.dll

6.1.7601.22214

225,792

10-Jan-2013

05:35

x64

Dhcpcsvc6.dll

6.1.7601.22214

54,784

10-Jan-2013

05:35

x64

Netio.sys

6.1.7601.17939

376,688

22-Aug-2012

18:12

x64

Netio.sys

6.1.7601.22214

376,664

10-Jan-2013

05:47

x64

Fwpkclnt.sys

6.1.7600.17211

287,576

10-Jan-2013

05:41

x64

Tcpip.sys

6.1.7600.17211

1,891,160

10-Jan-2013

05:41

x64

Fwpkclnt.sys

6.1.7600.21421

287,576

10-Jan-2013

05:54

x64

Tcpip.sys

6.1.7600.21421

1,876,824

10-Jan-2013

05:54

x64

Fwpkclnt.sys

6.1.7601.18048

288,088

10-Jan-2013

06:04

x64

Tcpip.sys

6.1.7601.18048

1,911,640

10-Jan-2013

06:04

x64

Fwpkclnt.sys

6.1.7601.22214

288,104

10-Jan-2013

05:47

x64

Tcpip.sys

6.1.7601.22214

1,901,400

10-Jan-2013

05:47

x64

Dhcpcore.dll

6.1.7600.17211

252,928

10-Jan-2013

04:50

x86

Dhcpcore.dll

6.1.7600.21421

255,488

10-Jan-2013

04:40

x86

Dhcpcore6.dll

6.1.7600.21421

192,000

10-Jan-2013

04:40

x86

Dhcpcore.dll

6.1.7601.18048

253,952

10-Jan-2013

04:42

x86

Dhcpcore6.dll

6.1.7601.17970

193,536

09-Oct-2012

17:40

x86

Dhcpcsvc6.dll

6.1.7601.17970

44,032

09-Oct-2012

17:40

x86

Dhcpcore.dll

6.1.7601.22214

256,000

10-Jan-2013

04:46

x86

Dhcpcore6.dll

6.1.7601.22214

194,048

10-Jan-2013

04:46

x86

Dhcpcsvc6.dll

6.1.7601.22214

43,520

10-Jan-2013

04:46

x86

For all supported IA-64-based versions of Windows Server 2008 R2

File name

File version

File size

Date

Time

Platform

Dhcpcore.dll

6.1.7600.17211

614,400

10-Jan-2013

04:31

IA-64

Dhcpcore.dll

6.1.7600.21421

617,472

10-Jan-2013

04:38

IA-64

Dhcpcore6.dll

6.1.7600.21421

462,336

10-Jan-2013

04:38

IA-64

Dhcpcore.dll

6.1.7601.18048

618,496

10-Jan-2013

04:29

IA-64

Dhcpcore6.dll

6.1.7601.17970

466,944

09-Oct-2012

17:00

IA-64

Dhcpcsvc6.dll

6.1.7601.17970

87,552

09-Oct-2012

17:00

IA-64

Dhcpcore.dll

6.1.7601.22214

620,032

10-Jan-2013

04:35

IA-64

Dhcpcore6.dll

6.1.7601.22214

465,408

10-Jan-2013

04:35

IA-64

Dhcpcsvc6.dll

6.1.7601.22214

87,040

10-Jan-2013

04:35

IA-64

Netio.sys

6.1.7601.17939

711,024

22-Aug-2012

16:51

IA-64

Netio.sys

6.1.7601.22214

711,016

10-Jan-2013

04:45

IA-64

Fwpkclnt.sys

6.1.7600.17211

482,136

10-Jan-2013

04:43

IA-64

Tcpip.sys

6.1.7600.17211

3,790,184

10-Jan-2013

04:43

IA-64

Fwpkclnt.sys

6.1.7600.21421

482,152

10-Jan-2013

04:48

IA-64

Tcpip.sys

6.1.7600.21421

3,810,664

10-Jan-2013

04:48

IA-64

Fwpkclnt.sys

6.1.7601.18048

482,136

10-Jan-2013

04:44

IA-64

Tcpip.sys

6.1.7601.18048

3,796,840

10-Jan-2013

04:44

IA-64

Fwpkclnt.sys

6.1.7601.22214

482,136

10-Jan-2013

04:45

IA-64

Tcpip.sys

6.1.7601.22214

3,821,416

10-Jan-2013

04:45

IA-64

Dhcpcore.dll

6.1.7600.17211

252,928

10-Jan-2013

04:50

x86

Dhcpcore.dll

6.1.7600.21421

255,488

10-Jan-2013

04:40

x86

Dhcpcore6.dll

6.1.7600.21421

192,000

10-Jan-2013

04:40

x86

Dhcpcore.dll

6.1.7601.18048

253,952

10-Jan-2013

04:42

x86

Dhcpcore6.dll

6.1.7601.17970

193,536

09-Oct-2012

17:40

x86

Dhcpcsvc6.dll

6.1.7601.17970

44,032

09-Oct-2012

17:40

x86

Dhcpcore.dll

6.1.7601.22214

256,000

10-Jan-2013

04:46

x86

Dhcpcore6.dll

6.1.7601.22214

194,048

10-Jan-2013

04:46

x86

Dhcpcsvc6.dll

6.1.7601.22214

43,520

10-Jan-2013

04:46

x86


Workaround

To work around this issue, configure the DHCP Client on Windows 7 to request Broadcast responses from non-Microsoft DHCP Servers or Relay Agents. This is a two-part solution to this issue.

In Part 1, you must make a registry change that forces the DHCP Client in Windows 7 to always set the broadcast flag in DHCP DISCOVER messages. The change is based on the network adapter type that is inside the computer.

In Part 2, you must delete the registry entries that currently exist for the broadcast flag for each adapter. This applies the new instance of the network adapters that are installed in the client. After you restart the client at the end of Part 2, Windows then uses the global setting that you created in Part 1 to re-create the needed registry entries according to the interface. If a restart of Windows is not possible, please refer to the Note at the end of Part 2 for a method that creates the correct registry entries for each interface without restarting the computer.

Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:

322756 How to back up and restore the registry in Windows

Part 1: Create a global registry entry that is based on the network adapter type Follow these steps, and then exit Registry Editor:

  1. Click Start, click Run, type regedit, and then click OK.

  2. Locate and then click the following subkey in the registry:

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325 -11CE-BFC1-08002BE10318}Note Under this subkey, there is a sequence of subkeys. For example, you see "0000, 0001."

  3. Select the subkey that matches the network adapter that is being used by the computer.

    Note To determine the network adapter, match the "Driver Desc" entry to the name of the physical network adapter that is installed.

  4. If this entry is present, note the type that is listed for the MediaType and PhysicalMediumType registry entries. This represents the kind of network interface (Ethernet, for example). However, you may instead see the registry entries *MediaType and *PhysicalMediumType, and each entry has a value of 0. If this is the case, you must be familiar with the kind of network adapter that is installed in the computer to create the correct registry entries in the following steps.

  5. Locate and then click the following subkey in the registry:

    HKEY_LOCAL_MACHINE\System\CurrentControlSet\services\Dhcp\Parameters

  6. On the Edit menu, point to New, and then click Key.

  7. Type DhcpGlobalForceBroadcastFlag for the subkey's name.

  8. On the Edit menu, point to New, and then click Key.

  9. Type MediaType, and then press Enter.

    The placeholder MediaType corresponds to the entry for the MediaType registry entry that you found in step 4.

  10. On the Edit menu, point to New, and then click DWORD Value.

  11. Type PhysicalMediumType, and then press Enter.

    The placeholder PhysicalMediumType corresponds to the entry for the PhysicalMediumType registry entry that you found in step 4.

  12. On the Edit menu, click Modify.

  13. Type 1, and then click OK.

Example: For an Ethernet adapter, the following registry subkey would have the following values:

HKEY_LOCAL_MACHINE\System\CurrentControlSet\services\Dhcp\Parameters\DhcpGlobalForceBroadcastFlag\0\14
Registry entry and value: DWORD = 1PhysicalMediumType can have the following values:

  • 0 (Unspecified), value 0 or 1

  • 9 (Wireless), value 0 or 1

  • 14 (Ethernet), value 0 or 1

For more information and detailed values for MediaType and PhysicalMediumType, see the corresponding tables in the following Microsoft Developer Network article:

MIB_IF_ROW2 structureNote If you are performing a fresh image deployment of Windows 7 computers, you can directly add the global flag in the VIM image. This global flag will take effect when the interfaces are initialized on deployment.

Part 2: Delete the existing keys for broadcast flag according to the network interface

  1. Click Start, click Run, type regedit, and then click OK.

  2. Locate the following registry subkey:

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Tcpip\Parameters\Interfaces\<GUID> Note The placeholder <GUID> represents the GUID for the appropriate network interface.

  3. Delete the following registry entry:

    DhcpConnForceBroadcastFlag

  4. Restart the computer.

  5. After the computer starts, you see that the client has successfully received an IP address through DHCP.

If you examine the registry subkey that you located in step 2, you find that the registry value DHCPConnForceBroadcastFlag is restored, and it has the value 1.

Note Restarting the computer is the recommended method. If you do not want to restart the computer, first stop and then disable the DHCP Client service. Then, delete the interface-specific subkey because the DHCP Client service backs up the registry when the service is stopped and started. However, the DHCP Client service does not back up the registry when the service stops during shutdown.

Wireless AdaptersWindows 7 maintains a cache of settings for every unique wireless network that Windows 7 connects to. This information is stored in a subkey that represents each wireless service set identifier (SSID) under the specific wireless adapter interface GUID. Together with other information about the wireless network, Windows 7 also maintains a specific value for DHCPConnForceBroadcastFlag. Therefore, for a wireless adapter, other than deleting the interface-specific registry entry, you must also visit every unique wireless network cache and delete the entry for DHCPConnForceBroadcastFlag. The location is stored in the following registry subkey:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Tcpip\Parameters\Interfaces\<GUID>\<wirelessSSID>\DHCPConnForceBroadcastFlagAfter you delete the DHCPConnForceBroadcastFlag entry, it is re-created based on the value of the global flag.

Note The placeholder <wirelessSSID> is the hexadecimal string that represents a wireless network.

Status

Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the "Applies to" section.

More Information

This issue does not occur on Windows Vista. By default, Windows Vista sets the DHCP broadcast flag to 1. However, because of some issues that were reported with that behavior, the Windows 7 behavior was changed. For more information about this behavior in Windows Vista, click the following article numbers to view the articles in the Microsoft Knowledge Base:

928233 Windows Vista cannot obtain an IP address from certain routers or from certain non-Microsoft DHCP servers

933340 You cannot use a remote access server to apply DHCP options to a Windows Vista-based computer
Windows 7 also has DhcpConnEnableBcastFlagToggle set to 1. Therefore, if the client cannot obtain an IP address after four attempts, the DHCP client toggles the DHCP broadcast flag and tries to obtain the IP address. The DHCP client also remembers the flag that was last used to obtain the IPv4 address.

For more information about software update terminology, click the following article number to view the article in the Microsoft Knowledge Base:

824684 Description of the standard terminology that is used to describe Microsoft software updates

Additional file information for Windows 7 and for Windows Server 2008 R2

Additional files for all supported x86-based versions of Windows 7

File name

Update-bf.mum

File version

Not Applicable

File size

41,008

Date (UTC)

11-Jan-2013

Time (UTC)

09:22

Platform

Not Applicable

File name

Update.mum

File version

Not Applicable

File size

41,785

Date (UTC)

11-Jan-2013

Time (UTC)

09:22

Platform

Not Applicable

File name

X86_microsoft-windows-dhcp-client-dll_31bf3856ad364e35_6.1.7600.17211_none_d77815618fae5872.manifest

File version

Not Applicable

File size

95,014

Date (UTC)

11-Jan-2013

Time (UTC)

09:26

Platform

Not Applicable

File name

X86_microsoft-windows-dhcp-client-dll_31bf3856ad364e35_6.1.7600.21421_none_d7f6e426a8d41154.manifest

File version

Not Applicable

File size

95,014

Date (UTC)

11-Jan-2013

Time (UTC)

09:26

Platform

Not Applicable

File name

X86_microsoft-windows-dhcp-client-dll_31bf3856ad364e35_6.1.7601.18048_none_d94504a98ce6c992.manifest

File version

Not Applicable

File size

95,014

Date (UTC)

11-Jan-2013

Time (UTC)

09:26

Platform

Not Applicable

File name

X86_microsoft-windows-dhcp-client-dll_31bf3856ad364e35_6.1.7601.22214_none_d9eb11f6a5efad54.manifest

File version

Not Applicable

File size

95,014

Date (UTC)

11-Jan-2013

Time (UTC)

09:26

Platform

Not Applicable

File name

X86_microsoft-windows-netio-infrastructure_31bf3856ad364e35_6.1.7601.17939_none_58923ff3139b4b9b.manifest

File version

Not Applicable

File size

2,540

Date (UTC)

22-Aug-2012

Time (UTC)

17:35

Platform

Not Applicable

File name

X86_microsoft-windows-netio-infrastructure_31bf3856ad364e35_6.1.7601.22214_none_592c552c2cad6539.manifest

File version

Not Applicable

File size

2,540

Date (UTC)

10-Jan-2013

Time (UTC)

05:37

Platform

Not Applicable

File name

X86_microsoft-windows-tcpip-binaries_31bf3856ad364e35_6.1.7600.17211_none_b33bfe13c784c9ee.manifest

File version

Not Applicable

File size

3,834

Date (UTC)

10-Jan-2013

Time (UTC)

05:38

Platform

Not Applicable

File name

X86_microsoft-windows-tcpip-binaries_31bf3856ad364e35_6.1.7600.21421_none_b3baccd8e0aa82d0.manifest

File version

Not Applicable

File size

3,834

Date (UTC)

10-Jan-2013

Time (UTC)

05:36

Platform

Not Applicable

File name

X86_microsoft-windows-tcpip-binaries_31bf3856ad364e35_6.1.7601.18048_none_b508ed5bc4bd3b0e.manifest

File version

Not Applicable

File size

3,834

Date (UTC)

10-Jan-2013

Time (UTC)

05:36

Platform

Not Applicable

File name

X86_microsoft-windows-tcpip-binaries_31bf3856ad364e35_6.1.7601.22214_none_b5aefaa8ddc61ed0.manifest

File version

Not Applicable

File size

3,834

Date (UTC)

10-Jan-2013

Time (UTC)

05:39

Platform

Not Applicable

Additional files for all supported x64-based versions of Windows 7 and of Windows Server 2008 R2

File name

Amd64_microsoft-windows-dhcp-client-dll_31bf3856ad364e35_6.1.7600.17211_none_3396b0e5480bc9a8.manifest

File version

Not Applicable

File size

95,032

Date (UTC)

11-Jan-2013

Time (UTC)

09:34

Platform

Not Applicable

File name

Amd64_microsoft-windows-dhcp-client-dll_31bf3856ad364e35_6.1.7600.21421_none_34157faa6131828a.manifest

File version

Not Applicable

File size

95,032

Date (UTC)

11-Jan-2013

Time (UTC)

09:34

Platform

Not Applicable

File name

Amd64_microsoft-windows-dhcp-client-dll_31bf3856ad364e35_6.1.7601.18048_none_3563a02d45443ac8.manifest

File version

Not Applicable

File size

95,032

Date (UTC)

11-Jan-2013

Time (UTC)

09:34

Platform

Not Applicable

File name

Amd64_microsoft-windows-dhcp-client-dll_31bf3856ad364e35_6.1.7601.22214_none_3609ad7a5e4d1e8a.manifest

File version

Not Applicable

File size

95,032

Date (UTC)

11-Jan-2013

Time (UTC)

09:34

Platform

Not Applicable

File name

Amd64_microsoft-windows-netio-infrastructure_31bf3856ad364e35_6.1.7601.17939_none_b4b0db76cbf8bcd1.manifest

File version

Not Applicable

File size

2,542

Date (UTC)

22-Aug-2012

Time (UTC)

18:33

Platform

Not Applicable

File name

Amd64_microsoft-windows-netio-infrastructure_31bf3856ad364e35_6.1.7601.22214_none_b54af0afe50ad66f.manifest

File version

Not Applicable

File size

2,542

Date (UTC)

10-Jan-2013

Time (UTC)

06:20

Platform

Not Applicable

File name

Amd64_microsoft-windows-tcpip-binaries_31bf3856ad364e35_6.1.7600.17211_none_0f5a99977fe23b24.manifest

File version

Not Applicable

File size

3,838

Date (UTC)

10-Jan-2013

Time (UTC)

06:22

Platform

Not Applicable

File name

Amd64_microsoft-windows-tcpip-binaries_31bf3856ad364e35_6.1.7600.21421_none_0fd9685c9907f406.manifest

File version

Not Applicable

File size

3,838

Date (UTC)

10-Jan-2013

Time (UTC)

06:23

Platform

Not Applicable

File name

Amd64_microsoft-windows-tcpip-binaries_31bf3856ad364e35_6.1.7601.18048_none_112788df7d1aac44.manifest

File version

Not Applicable

File size

3,838

Date (UTC)

10-Jan-2013

Time (UTC)

06:33

Platform

Not Applicable

File name

Amd64_microsoft-windows-tcpip-binaries_31bf3856ad364e35_6.1.7601.22214_none_11cd962c96239006.manifest

File version

Not Applicable

File size

3,838

Date (UTC)

10-Jan-2013

Time (UTC)

06:25

Platform

Not Applicable

File name

Update-bf.mum

File version

Not Applicable

File size

58,336

Date (UTC)

11-Jan-2013

Time (UTC)

09:22

Platform

Not Applicable

File name

Update.mum

File version

Not Applicable

File size

59,425

Date (UTC)

11-Jan-2013

Time (UTC)

09:22

Platform

Not Applicable

File name

Wow64_microsoft-windows-netio-infrastructure_31bf3856ad364e35_6.1.7601.17939_none_bf0585c900597ecc.manifest

File version

Not Applicable

File size

1,166

Date (UTC)

22-Aug-2012

Time (UTC)

17:23

Platform

Not Applicable

File name

Wow64_microsoft-windows-netio-infrastructure_31bf3856ad364e35_6.1.7601.22214_none_bf9f9b02196b986a.manifest

File version

Not Applicable

File size

1,166

Date (UTC)

10-Jan-2013

Time (UTC)

05:26

Platform

Not Applicable

File name

X86_microsoft-windows-dhcp-client-dll_31bf3856ad364e35_6.1.7600.17211_none_d77815618fae5872.manifest

File version

Not Applicable

File size

95,014

Date (UTC)

11-Jan-2013

Time (UTC)

09:34

Platform

Not Applicable

File name

X86_microsoft-windows-dhcp-client-dll_31bf3856ad364e35_6.1.7600.21421_none_d7f6e426a8d41154.manifest

File version

Not Applicable

File size

95,014

Date (UTC)

11-Jan-2013

Time (UTC)

09:35

Platform

Not Applicable

File name

X86_microsoft-windows-dhcp-client-dll_31bf3856ad364e35_6.1.7601.18048_none_d94504a98ce6c992.manifest

File version

Not Applicable

File size

95,014

Date (UTC)

11-Jan-2013

Time (UTC)

09:35

Platform

Not Applicable

File name

X86_microsoft-windows-dhcp-client-dll_31bf3856ad364e35_6.1.7601.22214_none_d9eb11f6a5efad54.manifest

File version

Not Applicable

File size

95,014

Date (UTC)

11-Jan-2013

Time (UTC)

09:35

Platform

Not Applicable

Additional files for all supported IA-64-based versions of Windows Server 2008 R2

File name

Ia64_microsoft-windows-dhcp-client-dll_31bf3856ad364e35_6.1.7600.17211_none_d779b9578fac616e.manifest

File version

Not Applicable

File size

95,023

Date (UTC)

11-Jan-2013

Time (UTC)

09:23

Platform

Not Applicable

File name

Ia64_microsoft-windows-dhcp-client-dll_31bf3856ad364e35_6.1.7600.21421_none_d7f8881ca8d21a50.manifest

File version

Not Applicable

File size

95,023

Date (UTC)

11-Jan-2013

Time (UTC)

09:22

Platform

Not Applicable

File name

Ia64_microsoft-windows-dhcp-client-dll_31bf3856ad364e35_6.1.7601.18048_none_d946a89f8ce4d28e.manifest

File version

Not Applicable

File size

95,023

Date (UTC)

11-Jan-2013

Time (UTC)

09:22

Platform

Not Applicable

File name

Ia64_microsoft-windows-dhcp-client-dll_31bf3856ad364e35_6.1.7601.22214_none_d9ecb5eca5edb650.manifest

File version

Not Applicable

File size

95,023

Date (UTC)

11-Jan-2013

Time (UTC)

09:23

Platform

Not Applicable

File name

Ia64_microsoft-windows-netio-infrastructure_31bf3856ad364e35_6.1.7601.17939_none_5893e3e913995497.manifest

File version

Not Applicable

File size

2,541

Date (UTC)

22-Aug-2012

Time (UTC)

18:25

Platform

Not Applicable

File name

Ia64_microsoft-windows-netio-infrastructure_31bf3856ad364e35_6.1.7601.22214_none_592df9222cab6e35.manifest

File version

Not Applicable

File size

2,541

Date (UTC)

10-Jan-2013

Time (UTC)

06:14

Platform

Not Applicable

File name

Ia64_microsoft-windows-tcpip-binaries_31bf3856ad364e35_6.1.7600.17211_none_b33da209c782d2ea.manifest

File version

Not Applicable

File size

3,836

Date (UTC)

10-Jan-2013

Time (UTC)

06:25

Platform

Not Applicable

File name

Ia64_microsoft-windows-tcpip-binaries_31bf3856ad364e35_6.1.7600.21421_none_b3bc70cee0a88bcc.manifest

File version

Not Applicable

File size

3,836

Date (UTC)

10-Jan-2013

Time (UTC)

06:16

Platform

Not Applicable

File name

Ia64_microsoft-windows-tcpip-binaries_31bf3856ad364e35_6.1.7601.18048_none_b50a9151c4bb440a.manifest

File version

Not Applicable

File size

3,836

Date (UTC)

10-Jan-2013

Time (UTC)

06:11

Platform

Not Applicable

File name

Ia64_microsoft-windows-tcpip-binaries_31bf3856ad364e35_6.1.7601.22214_none_b5b09e9eddc427cc.manifest

File version

Not Applicable

File size

3,836

Date (UTC)

10-Jan-2013

Time (UTC)

06:17

Platform

Not Applicable

File name

Update-bf.mum

File version

Not Applicable

File size

8,033

Date (UTC)

11-Jan-2013

Time (UTC)

09:22

Platform

Not Applicable

File name

Update.mum

File version

Not Applicable

File size

8,186

Date (UTC)

11-Jan-2013

Time (UTC)

09:22

Platform

Not Applicable

File name

Wow64_microsoft-windows-netio-infrastructure_31bf3856ad364e35_6.1.7601.17939_none_bf0585c900597ecc.manifest

File version

Not Applicable

File size

1,166

Date (UTC)

22-Aug-2012

Time (UTC)

17:23

Platform

Not Applicable

File name

Wow64_microsoft-windows-netio-infrastructure_31bf3856ad364e35_6.1.7601.22214_none_bf9f9b02196b986a.manifest

File version

Not Applicable

File size

1,166

Date (UTC)

10-Jan-2013

Time (UTC)

05:26

Platform

Not Applicable

File name

X86_microsoft-windows-dhcp-client-dll_31bf3856ad364e35_6.1.7600.17211_none_d77815618fae5872.manifest

File version

Not Applicable

File size

95,014

Date (UTC)

11-Jan-2013

Time (UTC)

09:22

Platform

Not Applicable

File name

X86_microsoft-windows-dhcp-client-dll_31bf3856ad364e35_6.1.7600.21421_none_d7f6e426a8d41154.manifest

File version

Not Applicable

File size

95,014

Date (UTC)

11-Jan-2013

Time (UTC)

09:22

Platform

Not Applicable

File name

X86_microsoft-windows-dhcp-client-dll_31bf3856ad364e35_6.1.7601.18048_none_d94504a98ce6c992.manifest

File version

Not Applicable

File size

95,014

Date (UTC)

11-Jan-2013

Time (UTC)

09:22

Platform

Not Applicable

File name

X86_microsoft-windows-dhcp-client-dll_31bf3856ad364e35_6.1.7601.22214_none_d9eb11f6a5efad54.manifest

File version

Not Applicable

File size

95,014

Date (UTC)

11-Jan-2013

Time (UTC)

09:22

Platform

Not Applicable


Need more help?

Expand your skills
Explore Training
Get new features first
Join Microsoft Insiders

Was this information helpful?

What affected your experience?

Thank you for your feedback!

×