Microsoft Windows deployment tables
Windows Server 2008 (all editions)
Reference table
The following table contains the security update information for this software.
| Security update file names | For all supported 32-bit editions of Windows Server 2008: Windows6.0-KB3078601-x86.msu Windows6.0-KB4018196-x86.msu Windows6.0-KB4018466-x86.msu Windows6.0-KB4018556-x86.msu Windows6.0-KB4018821-x86.msu Windows6.0-KB4018885-x86.msu Windows6.0-KB4018927-x86.msu Windows6.0-KB4019149-x86.msu Windows6.0-KB4019204-x86.msu Windows6.0-KB4019206-x86.msu |
|---|---|
| For all supported x64-based editions of Windows Server 2008: Windows6.0-KB4018196-x64.msu Windows6.0-KB4018466-x64.msu Windows6.0-KB4018556-x64.msu Windows6.0-KB4018821-x64.msu Windows6.0-KB4018885-x64.msu Windows6.0-KB4018927-x64.msu Windows6.0-KB4019149-x64.msu Windows6.0-KB4019204-x64.msu Windows6.0-KB4019206-x64.msu |
|
| For all supported Itanium-based editions of Windows Server 2008: Windows6.0-KB4018466-ia64.msu Windows6.0-KB4018556-ia64.msu Windows6.0-KB4018821-ia64.msu Windows6.0-KB4018885-ia64.msu Windows6.0-KB4018927-ia64.msu Windows6.0-KB4019149-ia64.msu Windows6.0-KB4019204-ia64.msu Windows6.0-KB4019206-ia64.msu |
|
| Installation switches | See Microsoft Knowledge Base article 934307 |
| Restart requirement | You must restart the system after you apply this security update. |
| Removal information | WUSA.exe does not support uninstalling updates. To uninstall an update that is installed by WUSA, click Control Panel, and then click Security. Under Windows Update, click View installed updates, and then select from the list of updates. |
| File information | See Microsoft Knowledge Base article 3078601 See Microsoft Knowledge Base article 4018196 See Microsoft Knowledge Base article 4018466 See Microsoft Knowledge Base article 4018556 See Microsoft Knowledge Base article 4018821 See Microsoft Knowledge Base article 4018885 See Microsoft Knowledge Base article 4018927 See Microsoft Knowledge Base article 4019149 See Microsoft Knowledge Base article 4019204 See Microsoft Knowledge Base article 4019206 |
| Registry key verification | Note This update does not add a registry key to validate its installation. |
Internet Explorer deployment tables
Internet Explorer 9, Internet Explorer 10, and Internet Explorer 11 installed on Windows (all editions)
Reference table
The following table contains the security update information for this software.
| Security update file names | For Internet Explorer 9 in all supported 32-bit editions of Windows Server 2008: IE9-Windows6.0-KB4018271-x86.msu |
|---|---|
| For Internet Explorer 10 in all supported editions of Windows Server 2012: Windows8-RT-KB4018271-x86.msu |
|
| For Internet Explorer 11 in Windows 7 for 32-bit Systems Service Pack 1: IE11-Windows6.1-KB4018271-x86.msu |
|
| For Internet Explorer 11 in all supported 32-bit editions of Windows 8.1: Windows8.1-KB4018271-x86.msu |
|
| For Internet Explorer 11 in all supported editions of Windows Server 2012 R2: Windows8.1-KB4018271-x64.msu |
|
| For Internet Explorer 11 in Windows 7 for x64-based Systems Service Pack 1: IE11-Windows6.1-KB4018271-x64.msu |
|
| For Internet Explorer 11 in Windows Server 2008 R2 for x64-based Systems Service Pack 1: IE11-Windows6.1-KB4018271-x64.msu |
|
| For Internet Explorer 11 in all supported x64-based editions of Windows 8.1: Windows8.1-KB4018271-x64.msu |
|
| Installation switches | See Microsoft Knowledge Base article 934307 |
| Restart requirement | You must restart the system after you apply this security update. |
| Removal information | WUSA.exe does not support uninstalling updates. To uninstall an update that is installed by WUSA, click Control Panel, and then click Security. Under Windows Update, click View installed updates, and then select from the list of updates. |
| File information | See Microsoft Knowledge Base article 4018271 |
| Registry key verification | Note This update does not add a registry key to validate its installation. |
Microsoft Office deployment tables
Microsoft Office 2007 (all editions) and other software
Reference table
The following table contains the security update information for this software.
| Security update file name | Microsoft Office 2007 suites riched202007-kb2596904-fullfile-x86-glb.exe |
|---|---|
| Microsoft Office 2007 suites mso2007-kb3191895-fullfile-x86-glb.exe |
|
| Microsoft Office Word 2007: word2007-kb3191836-fullfile-x86-glb.exe |
|
| Microsoft Office Compatibility Pack Service Pack 3: wordconv2007-kb3191835-fullfile-x86-glb.exe |
|
| Microsoft Word Viewer: office-kb3191909-fullfile-enu.exe |
|
| Installation switches | See Microsoft Knowledge Base article 912203 |
| Restart requirement | In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart. To help reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base article 887012. |
| Removal information | Use the Add or Remove Programs item in Control Panel. |
| File information | See Microsoft Knowledge Base article 2596904 See Microsoft Knowledge Base article 3191895 See Microsoft Knowledge Base article 3191836 See Microsoft Knowledge Base article 3191835 See Microsoft Knowledge Base article 3191909 |
| Registry key verification | Not applicable |
Microsoft Office 2010 (all editions)
Reference table
The following table contains the security update information for this software.
| Security update file name | For Microsoft Office 2010 Service Pack 2 (32-bit editions): convloc2010-kb3118310-fullfile-x86-glb.exe |
|---|---|
| For Microsoft Office 2010 Service Pack 2 (64-bit editions) convloc2010-kb3118310-fullfile-x64-glb.exe |
|
| For Microsoft Office 2010 Service Pack 2 (32-bit editions): mso2010-kb3191899-fullfile-x86-glb.exe |
|
| For Microsoft Office 2010 Service Pack 2 (64-bit editions) mso2010-kb3191899-fullfile-x64-glb.exe |
|
| For Microsoft Office 2010 Service Pack 2 (32-bit editions): kb24286772010-kb3191841-fullfile-x86-glb.exe |
|
| For Microsoft Office 2010 Service Pack 2 (64-bit editions) kb24286772010-kb3191841-fullfile-x64-glb.exe |
|
| For Microsoft Word 2010 Service Pack 2 (32-bit editions): word2010-kb3191843-fullfile-x86-glb.exe |
|
| For Microsoft Word 2010 Service Pack 2 (64-bit editions)): word2010-kb3191843-fullfile-x64-glb.exe |
|
| Installation switches | See Microsoft Knowledge Base article 912203 |
| Restart requirement | In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart. To reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base article 887012. |
| Removal information | Use the Add or Remove Programs item in Control Panel. |
| File information | See Microsoft Knowledge Base article 3118310 See Microsoft Knowledge Base article 3191899 See Microsoft Knowledge Base article 3191841 See Microsoft Knowledge Base article 3191843 |
| Registry key verification | Not applicable |
Microsoft Office 2013 (all editions)
Reference table
The following table contains the security update information for this software.
| Security update file name | For Microsoft Word 2013 Service Pack 1 (32-bit editions): word2013-kb3178729-fullfile-x86-glb.exe |
|---|---|
| For Microsoft Word 2013 Service Pack 1 (64-bit editions): word2013-kb3178729-fullfile-x64-glb.exe |
|
| Microsoft Office 2013 Service Pack 1 (32-bit editions): conv2013-kb3172458-fullfile-x86-glb.exe |
|
| Microsoft Office 2013 Service Pack 1 (64-bit editions): conv2013-kb3172458-fullfile-x64-glb.exe |
|
| Microsoft Office 2013 Service Pack 1 (32-bit editions): mso2013-kb3191885-fullfile-x86-glb.exe |
|
| Microsoft Office 2013 Service Pack 1 (64-bit editions): mso2013-kb3191885-fullfile-x64-glb.exe |
|
| Installation switches | See Microsoft Knowledge Base article 912203 |
| Restart requirement | In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart. To reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base article 887012. |
| Removal information | Use the Add or Remove Programs item in Control Panel. |
| File information | See Microsoft Knowledge Base article 3178729 See Microsoft Knowledge Base article 3172458 See Microsoft Knowledge Base article 3191885 |
| Registry key verification | Not applicable |
Microsoft Office 2013 RT (all editions)
| Deployment | The 3172519 update for Microsoft Word 2013 RT is available via Windows Update. |
|---|---|
| Restart requirement | In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart. To help reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base article 887012. |
| Removal information | Click Control Panel, click System and Security, click Windows Update under See also, click Installed updates, and then select from the list of updates. |
| File information | See Microsoft Knowledge Base article 3178729 |
Microsoft Office 2016 (all editions)
Reference table
The following table contains the security update information for this software.
| Security update file name | For Microsoft Office 2016 (32-bit edition): conv2016-kb3114375-fullfile-x86-glb.exe |
|---|---|
| For Microsoft Office 2016 (64-bit edition): conv2016-kb3114375-fullfile-x64-glb.exe |
|
| For Microsoft Office 2016 (32-bit edition): msodll99l2016-kb3191863-fullfile-x86-glb.exe |
|
| For Microsoft Office 2016 (64-bit edition): msodll99l2016-kb3191863-fullfile-x64-glb.exe |
|
| For Microsoft Office 2016 (32-bit edition): mso2016-kb3191881-fullfile-x86-glb.exe |
|
| For Microsoft Office 2016 (64-bit edition): mso2016-kb3191881-fullfile-x64-glb.exe |
|
| For Microsoft Word 2016 (32-bit edition): word2016-kb3191865-fullfile-x86-glb.exe |
|
| For Microsoft Word 2016 (64-bit edition): word2016-kb3191865-fullfile-x64-glb.exe |
|
| Installation switches | See Microsoft Knowledge Base article 912203 |
| Restart requirement | In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart. To reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base article 887012. |
| Removal information | Use the Add or Remove Programs item in Control Panel. |
| File information | See Microsoft Knowledge Base article 3114375 See Microsoft Knowledge Base article 3191863 See Microsoft Knowledge Base article 3191881 See Microsoft Knowledge Base article 3191865 |
| Registry key verification | Not applicable |
Microsoft Office for Mac 2011
For deployment information for Microsoft Office for Mac 2011, see the following Knowledge Base article:
3212221 Description of the security update for Office for Mac 2011 14.7.4: May 16, 2017
Microsoft Office for Mac 2016
For deployment information for Office for Mac 2016, see the release notes at the following Office website:
Release notes for Office 2016 for Mac
Microsoft SharePoint Server 2010 (all editions)
Reference table
The following table contains the security update information for this software.
| Security update file name | For Word Automation Services on Microsoft SharePoint Server 2010 Service Pack 2: wdsrv2010-kb3191839-fullfile-x64-glb.exe |
|---|---|
| Installation switches | See Microsoft Knowledge Base article 912203 |
| Restart requirement | After you install this security update on all SharePoint servers, you must run the PSconfig tool to complete the installation process. You may have to restart the computer after you install this security update. In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message is displayed that advises you to restart the computer. To reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base article 887012. |
| Removal information | This security update cannot be removed. |
| File Information | See Microsoft Knowledge Base article 3191839 |
| Registry key verification | Not applicable |
Microsoft SharePoint Server 2013 (all editions)
Reference table
The following table contains the security update information for this software.
| Security update file name | For Microsoft Sharepoint Server 2013 Service Pack 1: |
|---|---|
| For Microsoft Sharepoint Server 2013 Service Pack 1: osfserver2013-kb3172475-fullfile-x64-glb.exe |
|
| For Microsoft Sharepoint Server 2013 Service Pack 1: sts2013-kb3191914-fullfile-x64-glb.exe |
|
| For Microsoft Sharepoint Server 2013 Service Pack 1: lpsrvloc2013-kb3162068-fullfile-x64-glb.exe |
|
| For Microsoft Sharepoint Server 2013 Service Pack 1: ppsmaloc2013-kb3162069-fullfile-x64-glb.exe |
|
| For Microsoft Sharepoint Server 2013 Service Pack 1: wasrvloc2013-kb3172482-fullfile-x64-glb.exe |
|
| For Microsoft Sharepoint Server 2013 Service Pack 1: eduloc2013-kb3172532-fullfile-x64-glb.exe |
|
| For Microsoft Sharepoint Server 2013 Service Pack 1: ifsloc2013-kb3172536-fullfile-x64-glb.exe |
|
| For Microsoft Sharepoint Server 2013 Service Pack 1: acsrvloc2013-kb3178633-fullfile-x64-glb.exe |
|
| For Microsoft Sharepoint Server 2013 Service Pack 1: vsrvloc2013-kb3178638-fullfile-x64-glb.exe |
|
| For Microsoft Sharepoint Server 2013 Service Pack 1: coreserverloc2013-kb3191886-fullfile-x64-glb.exe |
|
| For Microsoft SharePoint Foundation 2013 Service Pack 1: smsloc2013-kb3162054-fullfile-x64-glb.exe |
|
| For Excel Services on Microsoft Sharepoint Server 2013 Service Pack 1: xlsrvloc2013-kb3191887-fullfile-x64-glb.exe |
|
| For Word Automation Services on For Microsoft Sharepoint Server 2013 Service Pack 1: wdsrvloc2013-kb3162040-fullfile-x64-glb.exe |
|
| For Microsoft Project Server 2013 Service Pack 1: pjsrvloc2013-kb3191890-fullfile-x64-glb.exe |
|
| Installation switches | See Microsoft Knowledge Base article 912203 |
| Restart requirement | In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart. To reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base article 887012. |
| Removal information | This security update cannot be removed. |
| File Information | See Microsoft Knowledge Base article 3172475 See Microsoft Knowledge Base article 3191914 See Microsoft Knowledge Base article 3162068 See Microsoft Knowledge Base article 3162069 See Microsoft Knowledge Base article 3172482 See Microsoft Knowledge Base article 3172532 See Microsoft Knowledge Base article 3172536 See Microsoft Knowledge Base article 3178633 See Microsoft Knowledge Base article 3178638 See Microsoft Knowledge Base article 3191886 See Microsoft Knowledge Base article 3162054 See Microsoft Knowledge Base article 3191887 See Microsoft Knowledge Base article 3191890 See Microsoft Knowledge Base article 3162040 |
| Registry key verification | Not applicable |
Microsoft SharePoint Server 2016 (all editions)
Reference table
The following table contains the security update information for this software.
| Security update file name | For Microsoft SharePoint Enterprise Server 2016: sts2016-kb3191880-fullfile-x64-glb.exe |
|---|---|
| Installation switches | See Microsoft Knowledge Base article 912203 |
| Restart requirement | After you install this security update on all SharePoint servers, you must run the PSconfig tool to complete the installation process. You may have to restart the computer after you install this security update. In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message is displayed that advises you to restart the computer. To help reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base article 887012. |
| Removal information | This security update cannot be removed. |
| File Information | See Microsoft Knowledge Base article 3191880 |
| Registry key verification | Not applicable |
Microsoft Office Web Apps 2010 (all versions)
Reference table
The following table contains the security update information for this software.
| Security update file name | Microsoft Office Web Apps 2010 Service Pack 2: wac2010-kb3191904-fullfile-x64-glb.exe |
|---|---|
| Installation switches | See Microsoft Knowledge Base article 912203 |
| Restart requirement | In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart. To reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base article 887012. |
| Removal information | This security update cannot be removed. |
| File Information | See Microsoft Knowledge Base article 3191904 |
| Registry key verification | Not applicable |
Microsoft Office Web Apps 2013 (all versions)
Reference table
The following table contains the security update information for this software.
| Security update file name | For all supported editions of Microsoft Office Web Apps Server 2013 Service Pack 2: wacserver2013-kb3191888-fullfile-x64-glb.exe |
|---|---|
| Installation switches | See Microsoft Knowledge Base article 912203 |
| Restart requirement | In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart. To reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base article 887012. |
| Removal information | This security update cannot be removed. |
| File Information | See Microsoft Knowledge Base article 3191888 |
| Registry key verification | Not applicable |
Office Online Server
Reference table
The following table contains the security update information for this software.
| Security update file name | For all supported editions of Office Online Server: wacserver2016-kb-3191915-fullfile-x64-glb |
|---|---|
| Installation switches | See Microsoft Knowledge Base article 912203 |
| Restart requirement | In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart. To reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base article 887012. |
| Removal information | This security update cannot be removed. |
| File Information | See Microsoft Knowledge Base article 3191915 |
| Registry key verification | Not applicable |
Microsoft communications platforms and software
Reference table
The following table contains the security update information for this software.
| Security update file name | Skype for Business 2016 (32-bit) lync2016-kb3191858-fullfile-x86-glb.exe |
|---|---|
| Skype for Business 2016 (64-bit) lync2016-kb3191858-fullfile-x64-glb.exe |
|
| Installation switches | See Microsoft Knowledge Base article 912203 |
| Restart requirement | In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart. To reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base article 887012. |
| Removal information | This security update cannot be removed. |
| File Information | See Microsoft Knowledge Base article 3191858 |
| Registry key verification | Not applicable |
.NET deployment tables – Security-only release
Windows Server 2008 (.NET Framework installations)
Reference table
The following table contains the security update information for .NET Framework installations running on all supported versions of Windows Server 2008 Service Pack 2 for the Security Only Release.
| Security update file names | For Microsoft .NET Framework 2.0 Service Pack 2 on Windows Server 2008 for 32-bit Systems Service Pack 2: Windows6.0-KB4014575-x86.msu |
|---|---|
| For Microsoft .NET Framework 4.5.2 when installed on all supported 32-bit editions of Windows Server 2008 Service Pack 2: NDP45-KB4014599-x86.exe |
|
| For Microsoft .NET Framework 4.6 when installed on all supported 32-bit editions of Windows Server 2008 Service Pack 2: NDP46-KB4014591-x86.exe |
|
| For Microsoft .NET Framework 2.0 Service Pack 2 on Windows Server 2008 for x64-based Systems Service Pack 2: Windows6.0-KB4014575-x64.msu |
|
| For Microsoft .NET Framework 4.5.2 on all supported x64-based editions of Windows Server 2008 Service Pack 2: NDP45-KB4014599-x64.exe |
|
| For Microsoft .NET Framework 4.6 on all supported x64-based editions of Windows Server 2008 Service Pack 2: NDP46-KB4014591-x64.exe |
|
| For Microsoft .NET Framework 2.0 Service Pack 2 on Windows Server 2008 for Itanium-based Systems Service Pack 2: Windows6.0-KB4014575-ia64.msu |
|
| Installation switches | See Microsoft Knowledge Base article 2844699 |
| Update log file | For Microsoft .NET Framework 2.0 Service Pack 2: Not applicable |
| For Microsoft .NET Framework 4.5.2: KB4014599_*_*-Microsoft .NET Framework [.NET target version]-MSP0.txt KB4014599_*_*.html |
|
| For Microsoft .NET Framework 4.6: KB4014591_*_*-Microsoft .NET Framework 4.6/4.6.1-MSP0.txt KB4014591_*_*.html |
|
| Restart requirement | This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart. |
| Removal information | Click Control Panel, and then click Security. Under Windows Update, click View installed updates, and then select from the list of updates. |
| File information | See Microsoft Knowledge Base article 4014575 See Microsoft Knowledge Base article 4014599 See Microsoft Knowledge Base article 4014591 |
| Registry key verification | For Microsoft .NET Framework 2.0 Service Pack 2 (4014575): This update does not add a registry key to validate its installation. Use WMI to detect for the presence of this update. |
| For Microsoft .NET Framework 4.5.2: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework [.NET target version]\KB4014599 ”ThisVersionInstalled” = “Y” |
|
| For Microsoft .NET Framework 4.6: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework 4.6\KB4014591 "ThisVersionInstalled" = "Y" |
Windows 7 Service Pack 1 (.NET Framework installations)
Reference table
The following table contains the security update information for .NET Framework installations running on all supported versions of Windows 7 Service Pack 1 for the Security Only Release.
| Security update file name | For Microsoft .NET Framework 3.5.1 on all supported 32-bit editions of Windows 7 Service Pack 1: Windows6.1-KB4014579-x86.msu |
|---|---|
| For Microsoft .NET Framework 4.5.2 when installed on all supported 32-bit editions of Windows 7 Service Pack 1: NDP45-KB4014599-x86.exe |
|
| For Microsoft .NET Framework 4.6/4.6.1 when installed on all supported 32-bit editions of Windows 7 Service Pack 1: NDP46-KB4014591-x86.exe |
|
| For Microsoft .NET Framework 4.6.2 on all supported 32-bit editions of Windows 7 Service Pack 1: NDP46-KB4014588-x86.exe |
|
| For Microsoft .NET Framework 3.5.1 on all supported x64-based editions of Windows 7 Service Pack 1: Windows6.1-KB4014579-x64.msu |
|
| For Microsoft .NET Framework 4.5.2 when installed on all supported x64-based editions of Windows 7 Service Pack 1: NDP45-KB4014599-x86.exe |
|
| For Microsoft .NET Framework 4.6/4.6.1 when installed on all supported x64-based editions of Windows 7 Service Pack 1: NDP46-KB4014591-x64.exe |
|
| For Microsoft .NET Framework 4.6.2 on all supported x64-based editions of Windows 7 Service Pack 1: NDP46-KB4014588-x64.exe |
|
| Installation switches | See Microsoft Knowledge Base article 2844699 |
| Update log file | For Microsoft .NET Framework 3.5.1: Not applicable |
| For Microsoft .NET Framework 4.5.2: KB4014599_*_*-Microsoft .NET Framework [.NET target version]-MSP0.txt KB4014599_*_*.html |
|
| For Microsoft .NET Framework 4.6/4.6.1: KB4014591_*_*-Microsoft .NET Framework 4.6/4.6.1-MSP0.txt KB4014591_*_*.html |
|
| For Microsoft .NET Framework 4.6.2: Not applicable |
|
| Restart requirement | This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart. |
| Removal information | Click Control Panel, click System and Security under Windows Update, click View installed updates, and then select from the list of updates. |
| File information | See Microsoft Knowledge Base article 4014579 See Microsoft Knowledge Base article 4014599 See Microsoft Knowledge Base article 4014591 See Microsoft Knowledge Base article 4014588 |
| Registry key verification | For Microsoft .NET Framework 3.5.1: This update does not add a registry key to validate its installation. Use WMI to detect for the presence of this update. |
| For Microsoft .NET Framework 4.5.2: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework [.NET target version]\KB4014599 ”ThisVersionInstalled” = “Y” |
|
| For Microsoft .NET Framework 4.6/4.6.1: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework 4.6\KB4014591 "ThisVersionInstalled" = "Y" |
|
| For Microsoft .NET 4.6.2: This update does not add a registry key to validate its installation. Use WMI to detect this update. |
Windows Server 2008 R2 (.NET Framework installations)
Reference table
The following table contains the security update information for .NET Framework installations running on all supported versions of Windows Server 2008 R2 for the Security Only Release.
| Security update file name | For Microsoft .NET Framework 3.5.1 on all supported x64-based editions of Windows Server 2008 R2 Service Pack 1: Windows6.1-KB4014579-x64.msu |
|---|---|
| For Microsoft .NET Framework 4.5.2 when installed on all supported x64-based editions of Windows Server 2008 R2 Service Pack 1: NDP45-KB4014599-x64.exe |
|
| For Microsoft .NET Framework 4.6/4.6.1 when installed on all supported 32-bit editions of Windows 7 Service Pack 1: NDP46-KB4014591-x64.exe |
|
| For Microsoft .NET Framework 4.6.2 on all supported x64-based editions of Windows Server 2008 R2 Service Pack 1: NDP46-KB4014588-x64.exe |
|
| For Microsoft .NET Framework 3.5.1 on Windows Server 2008 R2 for Itanium-based Systems Service Pack 1: Windows6.1-KB4014579-ia64.msu |
|
| Installation switches | See Microsoft Knowledge Base article 2844699 |
| Update log file | For Microsoft .NET Framework 3.5.1: Not applicable |
| For Microsoft .NET Framework 4.5.2: KB4014566_*_*-Microsoft .NET Framework [.NET target version]-MSP0.txt KB4014566_*_*.html |
|
| For Microsoft .NET Framework 4.6/4.6.1: KB4014558_*_*-Microsoft .NET Framework 4.6/4.6.1-MSP0.txt KB4014558_*_*.html |
|
| For Microsoft .NET Framework 4.6.2: Not applicable |
|
| Restart requirement | This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart. |
| Removal information | Click Control Panel, click System and Security under Windows Update, click View installed updates, and then select from the list of updates. |
| File information | See Microsoft Knowledge Base article 4014579 See Microsoft Knowledge Base article 4014599 See Microsoft Knowledge Base article 4014591 See Microsoft Knowledge Base article 4014588 |
| Registry key verification | For Microsoft .NET Framework 3.5.1: This update does not add a registry key to validate its installation. Use WMI to detect for the presence of this update. |
| For Microsoft .NET Framework 4.5.2: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework [.NET target version]\KB4014599 ”ThisVersionInstalled” = “Y” |
|
| For Microsoft .NET Framework 4.6/4.6.1: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework 4.6\KB4014591 "ThisVersionInstalled" = "Y" |
|
| For Microsoft .NET 4.6.2: This update does not add a registry key to validate its installation. Use WMI to detect this update. |
Windows 8.1 (.NET Framework installations)
Reference table
The following table contains the security update information for .NET Framework installations running on all supported versions of Windows 8.1 for the Security Only Release.
| Security update file name | For Microsoft .NET Framework 3.5 on Windows 8.1 for 32-bit Systems: Windows8.1-KB4014581-x86.msu |
|---|---|
| For Microsoft .NET Framework 4.5.2 on Windows 8.1 for 32-bit Systems: Windows8.1-KB4014595-x86.msu |
|
| For Microsoft .NET Framework 4.6/4.6.1 on Windows 8.1 for 32-bit Systems: Windows8.1-KB4014590-x86.msu |
|
| For Microsoft .NET Framework 4.6.2 on Windows 8.1 for 32-bit Systems: Windows8.1-KB4014587-x86.msu |
|
| For Microsoft .NET Framework 3.5 on Windows 8.1 for x64-based Systems: Windows8.1-KB4014581-x64.msu |
|
| For Microsoft .NET Framework 4.5.2 on Windows 8.1 for x64-based Systems: Windows8.1-KB4014595-x64.msu |
|
| For Microsoft .NET Framework 4.6/4.6.1 on Windows 8.1 for x64-based Systems: Windows8.1-KB4014590-x64.msu |
|
| For Microsoft .NET Framework 4.6.2 on Windows 8.1 for x64-based Systems: Windows8.1-KB4014587-x64.msu |
|
| Installation switches | See Microsoft Knowledge Base article 2844699 |
| Restart requirement | This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services can't be stopped for any reason or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart. |
| Removal information | Click Control Panel, click System and Security under Windows Update, click View update history, and then select from the list of updates. |
| File information | See Microsoft Knowledge Base article 4014581 See Microsoft Knowledge Base article 4014595 See Microsoft Knowledge Base article 4014590 See Microsoft Knowledge Base article 4014587 |
| Registry key verification | These updates do not add a registry key to validate their installation. Use WMI to detect for the presence of these updates. |
Windows Server 2012 and Windows Server 2012 R2 (.NET Framework installations)
Reference table
The following table contains the security update information for .NET Framework installations running on all supported versions of Windows Server 2012 and Windows Server 2012 R2 for the Security Only Release.
| Security update file name | For Microsoft .NET Framework 3.5 on Windows Server 2012: Windows8-RT-KB4014577-x64.msu |
|---|---|
| For Microsoft .NET Framework 4.5.2 on Windows Server 2012: Windows8-RT-KB4014597-x64.msu |
|
| For Microsoft .NET Framework 4.6/4.6.1 on Windows Server 2012: Windows8-RT-KB4014589-x64.msu |
|
| For Microsoft .NET Framework 4.6.2 on Windows Server 2012: Windows8-RT-KB4014586-x64.msu |
|
| For Microsoft .NET Framework 3.5 on Windows Server 2012 R2: Windows8.1-KB4014581-x64.msu |
|
| For Microsoft .NET Framework 4.5.2 on Windows Server 2012 R2: Windows8.1-KB4014595-x64.msu |
|
| For Microsoft .NET Framework 4.6/4.6.1 on Windows Server 2012 R2: Windows8.1-KB4014590-x64.msu |
|
| For Microsoft .NET Framework 4.6.2 on Windows Server 2012 R2: Windows8.1-KB4014587-x64.msu |
|
| Installation switches | See Microsoft Knowledge Base article 2844699 |
| Restart requirement | This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services can't be stopped for any reason or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart. |
| Removal information | Click Control Panel, click System and Security under Windows Update, click View update history, and then select from the list of updates. |
| File information | See Microsoft Knowledge Base article 4014577 See Microsoft Knowledge Base article 4014597 See Microsoft Knowledge Base article 4014589 See Microsoft Knowledge Base article 4014586 See Microsoft Knowledge Base article 4014581 See Microsoft Knowledge Base article 4014595 See Microsoft Knowledge Base article 4014590 See Microsoft Knowledge Base article 4014587 |
| Registry key verification | These updates do not add a registry key to validate their installation. Use WMI to detect for the presence of these updates. |
.NET deployment tables – Monthly rollup
Windows Server 2008 (.NET Framework installations)
Reference table
The following table contains the security update information for .NET Framework installations running on all supported versions of Windows Server 2008 Service Pack 2 for the Monthly Rollup.
| Security update file names | For Microsoft .NET Framework 2.0 Service Pack 2 on Windows Server 2008 for 32-bit Systems Service Pack 2: Windows6.0-KB4014502-x86.msu |
|---|---|
| For Microsoft .NET Framework 4.5.2 when installed on all supported 32-bit editions of Windows Server 2008 Service Pack 2: NDP45-KB4014514-x86.exe |
|
| For Microsoft .NET Framework 4.6 when installed on all supported 32-bit editions of Windows Server 2008 Service Pack 2: NDP46-KB4014511-x86.exe |
|
| For Microsoft .NET Framework 2.0 Service Pack 2 on Windows Server 2008 for x64-based Systems Service Pack 2: Windows6.0-KB4014502-x64.msu |
|
| For Microsoft .NET Framework 4.5.2 on all supported x64-based editions of Windows Server 2008 Service Pack 2: NDP45-KB4014514-x64.exe |
|
| For Microsoft .NET Framework 4.6 on all supported x64-based editions of Windows Server 2008 Service Pack 2: NDP46-KB4014511-x64.exe |
|
| For Microsoft .NET Framework 2.0 Service Pack 2 on Windows Server 2008 for Itanium-based Systems Service Pack 2: Windows6.0-KB4014502-ia64.msu |
|
| Installation switches | See Microsoft Knowledge Base article 2844699 |
| Update log file | For Microsoft .NET Framework 2.0 Service Pack 2: Not applicable |
| For Microsoft .NET Framework 4.5.2: KB4014559_*_*-Microsoft .NET Framework [.NET target version]-MSP0.txt KB4014559_*_*.html |
|
| For Microsoft .NET Framework 4.6: KB4014553_*_*-Microsoft .NET Framework 4.6/4.6.1-MSP0.txt KB4014553_*_*.html |
|
| Restart requirement | This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart. |
| Removal information | Click Control Panel, and then click Security. Under Windows Update, click View installed updates, and then select from the list of updates. |
| File information | See Microsoft Knowledge Base article 4014502 See Microsoft Knowledge Base article 4014514 See Microsoft Knowledge Base article 4014511 |
| Registry key verification | For Microsoft .NET Framework 2.0 Service Pack 2 (4014205): This update does not add a registry key to validate its installation. Use WMI to detect for the presence of this update. |
| For Microsoft .NET Framework 4.5.2: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework [.NET target version]\KB4014514 ”ThisVersionInstalled” = “Y” |
|
| For Microsoft .NET Framework 4.6: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework 4.6\KB4014511 "ThisVersionInstalled" = "Y" |
Windows 7 Service Pack 1 (.NET Framework installations)
Reference table
The following table contains the security update information for .NET Framework installations running on all supported versions of Windows 7 Service Pack 1 for the Monthly Rollup.
| Security update file name | For Microsoft .NET Framework 3.5.1 on all supported 32-bit editions of Windows 7 Service Pack 1: Windows6.1-KB4014504-x86.msu |
|---|---|
| For Microsoft .NET Framework 4.5.2 when installed on all supported 32-bit editions of Windows 7 Service Pack 1: NDP45-KB4014514-x86.exe |
|
| For Microsoft .NET Framework 4.6/4.6.1 when installed on all supported 32-bit editions of Windows 7 Service Pack 1: NDP46-KB4014511-x86.exe |
|
| For Microsoft .NET Framework 4.6.2 on all supported 32-bit editions of Windows 7 Service Pack 1: NDP46-KB4014508-x86.exe |
|
| For Microsoft .NET Framework 3.5.1 on all supported x64-based editions of Windows 7 Service Pack 1: Windows6.1-KB4014504-x64.msu |
|
| For Microsoft .NET Framework 4.5.2 when installed on all supported x64-based editions of Windows 7 Service Pack 1: NDP45-KB4014514-x64.exe |
|
| For Microsoft .NET Framework 4.6/4.6.1 when installed on all supported x64-based editions of Windows 7 Service Pack 1: NDP46-KB4014511-x64.exe |
|
| For Microsoft .NET Framework 4.6.2 on all supported x64-based editions of Windows 7 Service Pack 1: NDP46-KB4014508-x64.exe |
|
| Installation switches | See Microsoft Knowledge Base article 2844699 |
| Update log file | For Microsoft .NET Framework 3.5.1: Not applicable |
| For Microsoft .NET Framework 4.5.2: KB4014514_*_*-Microsoft .NET Framework [.NET target version]-MSP0.txt KB4014514_*_*.html |
|
| For Microsoft .NET Framework 4.6/4.6.1: KB4014511_*_*-Microsoft .NET Framework 4.6/4.6.1-MSP0.txt KB4014511_*_*.html |
|
| For Microsoft .NET Framework 4.6.2: Not applicable |
|
| Restart requirement | This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason or required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart. |
| Removal information | Click Control Panel, click System and Security under Windows Update, click View installed updates, and then select from the list of updates. |
| File information | See Microsoft Knowledge Base article 4014504 See Microsoft Knowledge Base article 4014514 See Microsoft Knowledge Base article 4014511 See Microsoft Knowledge Base article 4014508 |
| Registry key verification | This update does not add a registry key to validate its installation. Use WMI to detect for the presence of this update. |
| For Microsoft .NET Framework 4.5.2: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework [.NET target version]\KB4014514 ”ThisVersionInstalled” = “Y” |
|
| For Microsoft .NET Framework 4.6/4.6.1: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework 4.6\KB4014511 "ThisVersionInstalled" = "Y" |
|
| For Microsoft .NET 4.6.2: This update does not add a registry key to validate its installation. Use WMI to detect this update. |
Windows Server 2008 R2 (.NET Framework installations)
Reference table
The following table contains the security update information for .NET Framework installations running on all supported versions of Windows Server 2008 for the Monthly Rollup.
| Security update file name | For Microsoft .NET Framework 3.5.1 on all supported x64-based editions of Windows Server 2008 R2 Service Pack 1: Windows6.1-KB4014504-x64.msu |
|---|---|
| For Microsoft .NET Framework 4.5.2 when installed on all supported x64-based editions of Windows Server 2008 R2 Service Pack 1: NDP45-KB4014514-x64.exe |
|
| For Microsoft .NET Framework 4.6/4.6.1 when installed on all supported 32-bit editions of Windows 7 Service Pack 1: NDP46-KB4014511-x64.exe |
|
| For Microsoft .NET Framework 4.6.2 on all supported x64-based editions of Windows Server 2008 R2 Service Pack 1: NDP46-KB4014508-x64.exe |
|
| For Microsoft .NET Framework 3.5.1 on Windows Server 2008 R2 for Itanium-based Systems Service Pack 1: Windows6.1-KB4014504-ia64.msu |
|
| Installation switches | See Microsoft Knowledge Base article 2844699 |
| Update log file | For Microsoft .NET Framework 3.5.1: Not applicable |
| For Microsoft .NET Framework 4.5.2: KB4014514_*_*-Microsoft .NET Framework [.NET target version]-MSP0.txt KB4014514_*_*.html |
|
| For Microsoft .NET Framework 4.6/4.6.1: KB4014511_*_*-Microsoft .NET Framework 4.6/4.6.1-MSP0.txt KB4014511_*_*.html |
|
| For Microsoft .NET Framework 4.6.2: Not applicable |
|
| Restart requirement | This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason or required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart. |
| Removal information | Click Control Panel, click System and Security under Windows Update, click View installed updates, and then select from the list of updates. |
| File information | See Microsoft Knowledge Base article 4014504 See Microsoft Knowledge Base article 4014514 See Microsoft Knowledge Base article 4014511 See Microsoft Knowledge Base article 4014508 |
| Registry key verification | This update does not add a registry key to validate its installation. Use WMI to detect for the presence of this update. |
| For Microsoft .NET Framework 4.5.2: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework [.NET target version]\KB4014514 ”ThisVersionInstalled” = “Y” |
|
| For Microsoft .NET Framework 4.6/4.6.1: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework 4.6\KB4014511 "ThisVersionInstalled" = "Y" |
|
| For Microsoft .NET 4.6.2: This update does not add a registry key to validate its installation. Use WMI to detect this update. |
Windows 8.1 (.NET Framework installations)
Reference table
The following table contains the security update information for .NET Framework installations running on all supported versions of Windows 8.1 for the Monthly Rollup.
| Security update file name | For Microsoft .NET Framework 3.5 on Windows 8.1 for 32-bit Systems: Windows8.1-KB4014505-x86.msu |
|---|---|
| For Microsoft .NET Framework 4.5.2 on Windows 8.1 for 32-bit Systems: Windows8.1-KB4014512-x86.msu |
|
| For Microsoft .NET Framework 4.6/4.6.1 on Windows 8.1 for 32-bit Systems: Windows8.1-KB4014510-x86.msu |
|
| For Microsoft .NET Framework 4.6.2 on Windows 8.1 for 32-bit Systems: Windows8.1-KB4014507-x86.msu |
|
| For Microsoft .NET Framework 3.5 on Windows 8.1 for x64-based Systems: Windows8.1-KB4014505-x64.msu |
|
| For Microsoft .NET Framework 4.5.2 on Windows 8.1 for x64-based Systems: Windows8.1-KB4014512-x64.msu |
|
| For Microsoft .NET Framework 4.6/4.6.1 on Windows 8.1 for x64-based Systems: Windows8.1-KB4014510-x64.msu |
|
| For Microsoft .NET Framework 4.6.2 on Windows 8.1 for x64-based Systems: Windows8.1-KB4014507-x64.msu |
|
| Installation switches | See Microsoft Knowledge Base article 2844699 |
| Restart requirement | This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason or required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart. |
| Removal information | Click Control Panel, click System and Security under Windows Update, click View update history, and then select from the list of updates. |
| File information | See Microsoft Knowledge Base article 4014505 See Microsoft Knowledge Base article 4014512 See Microsoft Knowledge Base article 4014510 See Microsoft Knowledge Base article 4014507 |
| Registry key verification | These updates do not add a registry key to validate their installation. Use WMI to detect for the presence of these updates. |
Windows Server 2012 and Windows Server 2012 R2 (.NET Framework installations)
Reference table
The following table contains the security update information for .NET Framework installations running on all supported versions of Windows Server 2012 and Windows Server 2012 R2 for the Monthly Rollup.
| Security update file name | For Microsoft .NET Framework 3.5 on Windows Server 2012: Windows8-RT-KB4014503-x64.msu |
|---|---|
| For Microsoft .NET Framework 4.5.2 on Windows Server 2012: Windows8-RT-KB4014513-x64.msu |
|
| For Microsoft .NET Framework 4.6/4.6.1 on Windows Server 2012: Windows8-RT-KB4014509-x64.msu |
|
| For Microsoft .NET Framework 4.6.2 on Windows Server 2012: Windows8-RT-KB4014506-x64.msu |
|
| For Microsoft .NET Framework 3.5 on Windows Server 2012 R2: Windows8.1-KB4014505-x64.msu |
|
| For Microsoft .NET Framework 4.5.2 on Windows Server 2012 R2: Windows8.1-KB4014512-x64.msu |
|
| For Microsoft .NET Framework 4.6/4.6.1 on Windows Server 2012 R2: Windows8.1-KB4014510-x64.msu |
|
| For Microsoft .NET Framework 4.6.2 on Windows Server 2012 R2: Windows8.1-KB4014507-x64.msu |
|
| Installation switches | See Microsoft Knowledge Base article 2844699 |
| Restart requirement | This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services can't be stopped for any reason or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart. |
| Removal information | Click Control Panel, click System and Security under Windows Update, click View update history, and then select from the list of updates. |
| File information | See Microsoft Knowledge Base article 4014503 See Microsoft Knowledge Base article 4014513 See Microsoft Knowledge Base article 4014509 See Microsoft Knowledge Base article 4014506 See Microsoft Knowledge Base article 4014505 See Microsoft Knowledge Base article 4014512 See Microsoft Knowledge Base article 4014510 See Microsoft Knowledge Base article 4014507 |
| Registry key verification | These updates do not add a registry key to validate their installation. Use WMI to detect for the presence of these updates. |
Windows RT 8.1 (.NET Framework installations)
Reference table
The following table contains the security update information for .NET Framework installations running on Windows RT 8.1 for the Monthly Rollup.
| Deployment | The 4014512 update is available via Windows Update only. The 4014510 update is available via Windows Update only. The 4014507 update is available via Windows Update only. |
|---|---|
| Restart Requirement | You must restart the system after applying this security update. |
| Removal Information | See Microsoft Knowledge Base article 4014512 See Microsoft Knowledge Base article 4014510 See Microsoft Knowledge Base article 4014507 |
| File Information | See the individual Knowledge Base articles that are listed in the “Additional information about this security update” section. |
Windows 10 (.NET Framework installations)
Reference table
The following table contains the security update information for .NET Framework installations running on all supported versions of Windows 10.
| Security update file name | For Microsoft .NET Framework 3.5 on all supported editions of Windows 10 for 32-bit Systems: Windows10.0-KB4019474-x86.msu |
|---|---|
| For Microsoft .NET Framework 3.5 on all supported editions of Windows 10 for x64-based Systems: Windows10.0-KB4019474-x64.msu |
|
| For Microsoft .NET Framework 4.6 on all supported editions of Windows 10 for 32-bit Systems: Windows10.0-KB4019474-x86.msu |
|
| For Microsoft .NET Framework 4.6 on all supported editions of Windows 10 for x64-based Systems: Windows10.0 KB4019474-x64.msu |
|
| For Microsoft .NET Framework 3.5 on all supported 32-bit editions of Windows 10 version 1511: Windows10.0-KB4019473-x86.msu |
|
| For Microsoft .NET Framework 3.5 on all supported x64-based editions of Windows 10 Version 1511: Windows10.0-KB4019473-x64.msu |
|
| For Microsoft .NET Framework 4.6 on all supported 32-bit editions of Windows 10 version 1511: Windows10.0-KB4019473-x86.msu |
|
| For Microsoft .NET Framework 4.6 on all supported x64-based editions of Windows 10 Version 1511: Windows10.0-KB4019473-x64.msu |
|
| For Microsoft .NET Framework 3.5 on all supported 32-bit editions of Windows 10 version 1607: Windows10.0-KB4019472-x86.msu |
|
| For Microsoft .NET Framework 3.5 on all supported x64-based editions of Windows 10 Version 1607: Windows10.0-KB4019472-x64.msu |
|
| For Microsoft .NET Framework 4.6 on all supported 32-bit editions of Windows 10 version 1607: Windows10.0-KB4019472-x86.msu |
|
| For Microsoft .NET Framework 4.6 on all supported x64-based editions of Windows 10 Version 1607: Windows10.0-KB4019472-x64.msu |
|
| For Microsoft .NET Framework 3.5 on all supported 32-bit editions of Windows 10 version 1703: Windows10.0-KB4016871-x86.msu |
|
| For Microsoft .NET Framework 3.5 on all supported x64-based editions of Windows 10 Version 1703: Windows10.0-KB4016871-x86.msu |
|
| For Microsoft .NET Framework 4.6 on all supported 32-bit editions of Windows 10 version 1703: Windows10.0-KB4016871-x86.msu |
|
| For Microsoft .NET Framework 4.6 on all supported x64-based editions of Windows 10 Version 1703: Windows10.0-KB4016871-x64.msu |
|
| Installation switches | For Microsoft .NET Framework, see Microsoft Knowledge Base article 2844699 |
| Restart requirement | Yes, you must restart your system after you apply this security update. |
| Removal information | To uninstall an update that is installed by WUSA, use the /Uninstall setup switch or click Control Panel, click System and Security under Windows Update, click View installed updates, and then select from the list of updates. |
| File information | See Microsoft Knowledge Base article 4019474 See Microsoft Knowledge Base article 4019473 See Microsoft Knowledge Base article 4019472 See Microsoft Knowledge Base article 4016871 |
| Registry key verification | These updates do not add a registry key to validate their installation. |
Windows Server 2016 (.NET Framework installations)
Reference table
The following table contains the security update information for .NET Framework installations running on all supported versions of Windows 10.
| Security update file name | For Microsoft .NET Framework 3.5 on Windows Server 2016: Windows10.0-KB4016871-x64.msu |
|---|---|
| For Microsoft .NET Framework 4.6.2 on Windows Server 2016: Windows10.0-KB4016871-x64.msu |
|
| Installation switches | For Microsoft .NET Framework, see Microsoft Knowledge Base article 2844699 |
| Restart requirement | Yes, you must restart your system after you apply this security update. |
| Removal information | To uninstall an update that is installed by WUSA, use the /Uninstall setup switch or click Control Panel, click System and Security under Windows Update, click View installed updates, and then select from the list of updates. |
| File information | See Microsoft Knowledge Base article 4016871 |
| Registry key verification | These updates do not add a registry key to validate their installation. |