VAT in purchase statistics is recalculated after you make a change when you open the statistics form or page in Microsoft Dynamics NAV 2009

This article applies to Microsoft Dynamics NAV for all countries and all language locales.

Symptoms

Assume that you add a service charge to a purchase document in Microsoft Dynamics NAV 2009. Then, you change the VAT Amount in a purchase statistics form or page. When you open the statistics form or page again, the value is recalculated.

This problem occurs in the following products:

  • Microsoft Dynamics NAV 2009 Service Pack 1 (SP1)

  • Microsoft Dynamics NAV 2009 R2

Resolution

Hotfix information

A supported hotfix is now available from Microsoft. However, it is only intended to correct the problem that is described in this article. Apply it only to systems that are experiencing this specific problem. This hotfix may receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next Microsoft Dynamics NAV 2009 service pack or the next Microsoft Dynamics NAV version that contains this hotfix.

Note In special cases, charges that are ordinarily incurred for support calls may be canceled if a Technical Support Professional for Microsoft Dynamics and related products determines that a specific update will resolve your problem. The usual support costs will apply to additional support questions and issues that do not qualify for the specific update in question.



Installation information

Microsoft provides programming examples for illustration only, without warranty either expressed or implied. This includes, but is not limited to, the implied warranties of merchantability or fitness for a particular purpose. This article assumes that you are familiar with the programming language that is being demonstrated and with the tools that are used to create and to debug procedures. Microsoft support engineers can help explain the functionality of a particular procedure, but they will not modify these examples to provide added functionality or construct procedures to meet your specific requirements.

Note Before you install this hotfix, verify that all Microsoft Navision client users are logged off the system. This includes Microsoft Navision Application Services (NAS) client users. You should be the only client user who is logged on when you implement this hotfix.

To implement this hotfix, you must have a developer license.

We recommend that the user account in the Windows Logins window or in the Database Logins window be assigned the "SUPER" role ID. If the user account cannot be assigned the "SUPER" role ID, you must verify that the user account has the following permissions:

  • The Modify permission for the object that you will be changing.

  • The Execute permission for the System Object ID 5210 object and for the System Object ID 9015 object.


Note You do not have to have rights to the data stores unless you have to perform data repair.

Code changes

Note Always test code fixes in a controlled environment before you apply the fixes to your production computers.
To resolve this problem, follow these steps:

  1. Change the code in the UpdateVATAmounts function in the Sales Line table (37) as follows:
    Existing code 1

    ...
    END;

    LOCAL PROCEDURE UpdateVATAmounts@38();
    VAR
    SalesLine2@1000 : Record 37;
    TotalLineAmount@1005 : Decimal;
    TotalInvDiscAmount@1004 : Decimal;
    TotalAmount@1001 : Decimal;
    TotalAmountInclVAT@1002 : Decimal;
    TotalQuantityBase@1003 : Decimal;
    ...

    Replacement code 1

    ...
    END;

    LOCAL PROCEDURE UpdateVATAmounts@38();
    VAR
    SalesLine2@1000 : Record 37;

    // Add the following line.
    CustPostingGr@1009 : Record 92;
    // End of the added line.

    TotalLineAmount@1005 : Decimal;
    TotalInvDiscAmount@1004 : Decimal;
    TotalAmount@1001 : Decimal;
    TotalAmountInclVAT@1002 : Decimal;
    TotalQuantityBase@1003 : Decimal;
    ...

    Existing code 2

    ...
    SalesLine2.SETFILTER(Amount,'>%1',0)
    ELSE
    SalesLine2.SETFILTER(Amount,'<%1',0);
    SalesLine2.SETRANGE("VAT Identifier","VAT Identifier");
    SalesLine2.SETRANGE("Tax Group Code","Tax Group Code");

    IF "Line Amount" = "Inv. Discount Amount" THEN BEGIN
    Amount := 0;
    "VAT Base Amount" := 0;
    "Amount Including VAT" := 0;
    ...

    Replacement code 2

    ...
    SalesLine2.SETFILTER(Amount,'>%1',0)
    ELSE
    SalesLine2.SETFILTER(Amount,'<%1',0);
    SalesLine2.SETRANGE("VAT Identifier","VAT Identifier");
    SalesLine2.SETRANGE("Tax Group Code","Tax Group Code");

    // Add the following line.
    CustPostingGr.GET(SalesHeader."Customer Posting Group");
    // End of the added line.

    IF "Line Amount" = "Inv. Discount Amount" THEN BEGIN
    Amount := 0;
    "VAT Base Amount" := 0;
    "Amount Including VAT" := 0;
    ...

    Existing code 3

    ...
    IF "Line Amount" = "Inv. Discount Amount" THEN BEGIN
    Amount := 0;
    "VAT Base Amount" := 0;
    "Amount Including VAT" := 0;

    // Delete the following line.
    IF "Line No." <> 0 THEN
    // End of the deleted line.

    IF MODIFY THEN
    IF SalesLine2.FINDLAST THEN BEGIN
    SalesLine2.UpdateAmounts;
    SalesLine2.MODIFY;
    END;
    ...

    Replacement code 3

    ...
    IF "Line Amount" = "Inv. Discount Amount" THEN BEGIN
    Amount := 0;
    "VAT Base Amount" := 0;
    "Amount Including VAT" := 0;

    // Add the following line.
    IF ("Line No." <> 0) AND NOT ((Type = Type::"G/L Account") AND ("No." = CustPostingGr."Service Charge Acc.")) THEN
    // End of the added line.

    IF MODIFY THEN
    IF SalesLine2.FINDLAST THEN BEGIN
    SalesLine2.UpdateAmounts;
    SalesLine2.MODIFY;
    END;
    ...
  2. Change the code in the UpdateVATAmounts function in the Purchase Line table (39) as follows:
    Existing code 1

    ...
    END;

    LOCAL PROCEDURE UpdateVATAmounts@38();
    VAR
    PurchLine2@1000 : Record 39;
    TotalLineAmount@1005 : Decimal;
    TotalInvDiscAmount@1004 : Decimal;
    TotalAmount@1001 : Decimal;
    TotalAmountInclVAT@1002 : Decimal;
    TotalQuantityBase@1003 : Decimal;
    ...

    Replacement code 1

    ...
    END;

    LOCAL PROCEDURE UpdateVATAmounts@38();
    VAR
    PurchLine2@1000 : Record 39;

    // Add the following line.
    VendPostingGr@1009 : Record 93;
    // End of the added line.

    TotalLineAmount@1005 : Decimal;
    TotalInvDiscAmount@1004 : Decimal;
    TotalAmount@1001 : Decimal;
    TotalAmountInclVAT@1002 : Decimal;
    TotalQuantityBase@1003 : Decimal;
    ...

    Existing code 2

    ...
    PurchLine2.SETFILTER(Amount,'>%1',0)
    ELSE
    PurchLine2.SETFILTER(Amount,'<%1',0);
    PurchLine2.SETRANGE("VAT Identifier","VAT Identifier");
    PurchLine2.SETRANGE("Tax Group Code","Tax Group Code");

    IF "Line Amount" = "Inv. Discount Amount" THEN BEGIN
    Amount := 0;
    "VAT Base Amount" := 0;
    "Amount Including VAT" := 0;
    ...

    Replacement code 2

    ...
    PurchLine2.SETFILTER(Amount,'>%1',0)
    ELSE
    PurchLine2.SETFILTER(Amount,'<%1',0);
    PurchLine2.SETRANGE("VAT Identifier","VAT Identifier");
    PurchLine2.SETRANGE("Tax Group Code","Tax Group Code");

    // Add the following line.
    VendPostingGr.GET(PurchHeader."Vendor Posting Group");
    // End of the added line.

    IF "Line Amount" = "Inv. Discount Amount" THEN BEGIN
    Amount := 0;
    "VAT Base Amount" := 0;
    "Amount Including VAT" := 0;
    ...

    Existing code 3

    ...
    IF "Line Amount" = "Inv. Discount Amount" THEN BEGIN
    Amount := 0;
    "VAT Base Amount" := 0;
    "Amount Including VAT" := 0;

    // Delete the following line.
    IF "Line No." <> 0 THEN
    // End of the deleted line.

    IF MODIFY THEN
    IF PurchLine2.FINDLAST THEN BEGIN
    PurchLine2.UpdateAmounts;
    PurchLine2.MODIFY;
    END;
    ...

    Replacement code 3

    ...
    IF "Line Amount" = "Inv. Discount Amount" THEN BEGIN
    Amount := 0;
    "VAT Base Amount" := 0;
    "Amount Including VAT" := 0;

    // Add the following line.
    IF ("Line No." <> 0) AND NOT ((Type = Type::"G/L Account") AND ("No." = VendPostingGr."Service Charge Acc.")) THEN
    // End of the added line.

    IF MODIFY THEN
    IF PurchLine2.FINDLAST THEN BEGIN
    PurchLine2.UpdateAmounts;
    PurchLine2.MODIFY;
    END;
    ...

Prerequisites

You must have one of the following products installed to apply this hotfix:

  • Microsoft Dynamics NAV 2009 Service Pack 1 (SP1)

  • Microsoft Dynamics NAV 2009 R2



Removal information

You cannot remove this hotfix.

Status

Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the "Applies to" section.

Note This is a "FAST PUBLISH" article created directly from within the Microsoft support organization. The information contained herein is provided as-is in response to emerging issues. As a result of the speed in making it available, the materials may include typographical errors and may be revised at any time without notice. See Terms of Use for other considerations.

Need more help?

Expand your skills
Explore Training
Get new features first
Join Microsoft Insiders

Was this information helpful?

Thank you for your feedback!

×