Dit artikel is van toepassing op Microsoft voor de volgende landen en taalinstellingen.
-
Engels (Canada) (nl-ca)
-
Engels (Verenigde Staten) (en-us)
-
Spaans (Mexico) (es-mx)
-
Frans (Canada) (fr-ca)
Symptomen
Stel dat u CAD als instellen de waarde van de extra rapportagevaluta in de Boekhoudinstellingen dialoogvenster in de Noord-Amerikaanse versie van Microsoft Dynamics NAV 2009. Wanneer u een inkoopfactuur met btw boekt, wordt het volgende foutbericht weergegeven:
De transactie kan niet worden voltooid omdat er inconsistenties in de tabel Grootboekpost. Controleren waar en hoe de functie CONSISTENT in de transactie wordt gebruikt om te zoeken naar de oorzaak van de fout.
Dit probleem treedt op in de volgende producten:
-
De Noord-Amerikaanse versie van Microsoft Dynamics NAV 2009 R2
-
De Noord-Amerikaanse versie van Microsoft Dynamics NAV 2009 Service Pack 1
Oplossing
Informatie over de hotfix
Een ondersteunde hotfix is nu beschikbaar bij Microsoft. Het is echter alleen bedoeld om het probleem dat wordt beschreven in dit artikel. Pas deze alleen toe op systemen waarop dit specifieke probleem zich voordoet. Deze hotfix moet wellicht extra worden getest. Als u geen ernstige problemen ondervindt, is het daarom raadzaam te wachten op het volgende servicepack voor Microsoft Dynamics NAV 2009 of de volgende Microsoft Dynamics NAV versie waarin deze hotfix is opgenomen.
Opmerking In speciale gevallen kunnen kosten die verbonden zijn aan ondersteuningsoproepen ondersteuning worden geannuleerd als een medewerker van Technical Support voor Microsoft Dynamics en verwante producten bepaalt dat een specifieke update de oplossing van uw probleem. De normale ondersteuningskosten blijven gelden voor extra ondersteuningsvragen die niet in aanmerking voor de specifieke update in kwestie komen.
Informatie over de installatie
Microsoft verstrekt programmeervoorbeelden uitsluitend ter illustratie, zonder expliciete of impliciete garantie. Dit omvat, maar is niet beperkt tot, de impliciete garanties van verkoopbaarheid of geschiktheid voor een bepaald doel. In dit artikel wordt ervan uitgegaan dat u bekend met de programmeertaal die wordt aangetoond en met de hulpprogramma's die worden gebruikt bent voor het maken van en naar procedures voor foutopsporing. Ondersteuningstechnici van Microsoft kunnen voor uitleg over de functionaliteit van een bepaalde procedure, maar zij zullen deze voorbeelden bieden extra functionaliteit of desgewenst uw specifieke vereisten niet wijzigen.
Opmerking Voordat u deze hotfix hebt geïnstalleerd, controleert u of dat alle gebruikers van Microsoft Navision-clients zijn afgemeld bij het systeem. Dit geldt ook voor gebruikers van Microsoft Navision Application Services (NAS)-clients. U moet de alleen clientgebruiker die is aangemeld wanneer u deze hotfix gaat implementeren.
Als u deze hotfix gaat implementeren, hebt u een ontwikkelaarslicentie voor.
Is raadzaam dat de gebruikersaccount in het venster Windows-aanmeldingen of Databaseaanmeldingen de rol-id 'SUPER'. Als de gebruikersaccount kan worden toegewezen als de ID 'SUPER' rol, moet u controleren of de gebruikersaccount de volgende machtigingen heeft:
-
De machtiging wijzigen voor het object dat u wijzigt.
-
De machtiging uitvoeren voor het object System Object ID 5210 en voor het object System Object ID 9015 .
Opmerking Er geen rechten voor de opgeslagen gegevens hebben, tenzij u gegevens herstellen.
Codewijzigingen
Opmerking Altijd test code worden opgelost in een testomgeving voordat u de correcties in de productieomgeving.
Voor dit probleem als volgt te werk:
-
De code in velden in de tabel BTW-bedragregel (10011) als volgt wijzigen:
Bestaande code...ESM=Es Informe jurisdicci¢n;
FRC=Est une juridiction fiscale;
ENC=Is Report-to Jurisdiction];
Editable=No }
}
KEYS
{
{ ;Tax Area Code for Key,Tax Jurisdiction Code,Tax %,Tax Group Code,Expense/Capitalize,Tax Type,Use Tax;
...Nieuwe code
...
ESM=Es Informe jurisdicci¢n;
FRC=Est une juridiction fiscale;
ENC=Is Report-to Jurisdiction];
Editable=No }
// Add the following line.
{ 10044; ;Tax Base Amount FCY ;Decimal }
// End of the added line.
}
KEYS
{
{ ;Tax Area Code for Key,Tax Jurisdiction Code,Tax %,Tax Group Code,Expense/Capitalize,Tax Type,Use Tax;
... -
De code in de functie PostSalesTaxToGL in de Codeunit verkoop-boeken (80) als volgt wijzigen:
Bestaande code...END;
GenJnlLine."Tax Jurisdiction Code" := TempSalesTaxAmtLine."Tax Jurisdiction Code";
IF TempSalesTaxAmtLine."Tax Amount" <> 0 THEN BEGIN
RemSalesTaxSrcAmt := RemSalesTaxSrcAmt +
// Delete the following lines.
CurrExchRate.ExchangeAmtLCYToFCY(
UseDate,SalesHeader."Currency Code",TempSalesTaxAmtLine."Tax Amount",SalesHeader."Currency Factor");
// End of the deleted lines.
GenJnlLine."Source Curr. VAT Amount" :=
SalesTaxCalculate.ArithmeticRound(RemSalesTaxSrcAmt,Currency."Amount Rounding Precision");
RemSalesTaxSrcAmt := RemSalesTaxSrcAmt - GenJnlLine."Source Curr. VAT Amount";
RemSalesTaxAmt := RemSalesTaxAmt + TempSalesTaxAmtLine."Tax Amount";
...Nieuwe code
...END;
GenJnlLine."Tax Jurisdiction Code" := TempSalesTaxAmtLine."Tax Jurisdiction Code";
IF TempSalesTaxAmtLine."Tax Amount" <> 0 THEN BEGIN
RemSalesTaxSrcAmt := RemSalesTaxSrcAmt +
// Add the following lines.
TempSalesTaxAmtLine."Tax Base Amount FCY" * TempSalesTaxAmtLine."Tax %" / 100;
// End of the added lines.
GenJnlLine."Source Curr. VAT Amount" :=
SalesTaxCalculate.ArithmeticRound(RemSalesTaxSrcAmt,Currency."Amount Rounding Precision");
RemSalesTaxSrcAmt := RemSalesTaxSrcAmt - GenJnlLine."Source Curr. VAT Amount";
RemSalesTaxAmt := RemSalesTaxAmt + TempSalesTaxAmtLine."Tax Amount";
... -
Wijzig de code in de functie PostSalesTaxToGL in de Purch.-Post Codeunit (90) als volgt:
Bestaande code...END;
GenJnlLine."Tax Jurisdiction Code" := TempSalesTaxAmtLine."Tax Jurisdiction Code";
IF TempSalesTaxAmtLine."Tax Amount" <> 0 THEN BEGIN
RemSalesTaxSrcAmt := RemSalesTaxSrcAmt +
// Delete the following lines.
CurrExchRate.ExchangeAmtLCYToFCY(
Usedate,PurchHeader."Currency Code",TempSalesTaxAmtLine."Tax Amount",PurchHeader."Currency Factor");
// End of the deleted lines.
GenJnlLine."Source Curr. VAT Amount" :=
SalesTaxCalculate.ArithmeticRound(RemSalesTaxSrcAmt,Currency."Amount Rounding Precision");
RemSalesTaxSrcAmt := RemSalesTaxSrcAmt - GenJnlLine."Source Curr. VAT Amount";
RemSalesTaxAmt := RemSalesTaxAmt + TempSalesTaxAmtLine."Tax Amount";
...Nieuwe code
...END;
GenJnlLine."Tax Jurisdiction Code" := TempSalesTaxAmtLine."Tax Jurisdiction Code";
IF TempSalesTaxAmtLine."Tax Amount" <> 0 THEN BEGIN
RemSalesTaxSrcAmt := RemSalesTaxSrcAmt +
// Add the following line.
TempSalesTaxAmtLine."Tax Base Amount FCY" * TempSalesTaxAmtLine."Tax %" / 100;
// End of the added line.
GenJnlLine."Source Curr. VAT Amount" :=
SalesTaxCalculate.ArithmeticRound(RemSalesTaxSrcAmt,Currency."Amount Rounding Precision");
RemSalesTaxSrcAmt := RemSalesTaxSrcAmt - GenJnlLine."Source Curr. VAT Amount";
RemSalesTaxAmt := RemSalesTaxAmt + TempSalesTaxAmtLine."Tax Amount";
... -
Wijzig de code in de functie PostProvincialSalesTaxToGL in de Purch.-Post Codeunit (90) als volgt:
Bestaande code...TaxJurisdiction.TESTFIELD("Tax Account (Purchases)");
GenJnlLine."Account No." := TaxJurisdiction."Tax Account (Purchases)";
END;
GenJnlLine.Amount := GenJnlLine."VAT Amount";
// Delete the following lines.
GenJnlLine."Source Curr. VAT Base Amount" := 0;
GenJnlLine."VAT Base Amount (LCY)" := 0;
GenJnlLine."VAT Base Amount" := 0;
GenJnlLine."Source Curr. VAT Amount" := 0;
// End of the deleted lines.
GenJnlLine."VAT Amount (LCY)" := 0;
GenJnlLine."VAT Amount" := 0;
GenJnlLine.Quantity := 0;
GenJnlLine."VAT Difference" := 0;
...Nieuwe code
...TaxJurisdiction.TESTFIELD("Tax Account (Purchases)");
GenJnlLine."Account No." := TaxJurisdiction."Tax Account (Purchases)";
END;
GenJnlLine.Amount := GenJnlLine."VAT Amount";
// Add the following lines.
GenJnlLine."Source Currency Amount" := GenJnlLine."Source Curr. VAT Amount";
GenJnlLine."Source Curr. VAT Base Amount" := 0;
GenJnlLine."VAT Base Amount (LCY)" := 0;
GenJnlLine."VAT Base Amount" := 0;
// End of the added lines.
GenJnlLine."VAT Amount (LCY)" := 0;
GenJnlLine."VAT Amount" := 0;
GenJnlLine.Quantity := 0;
GenJnlLine."VAT Difference" := 0;
... -
De code in de functie AddSalesLine in de Codeunit in btw berekenen (398) als volgt wijzigen:
Bestaande code 1..."Round Tax" := TaxArea."Round Tax";
TaxJurisdiction.GET("Tax Jurisdiction Code");
"Is Report-to Jurisdiction" := ("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
// Delete the following line.
"Tax Base Amount" := (SalesLine."Line Amount" - SalesLine."Inv. Discount Amount") / ExchangeFactor;
// End of the deleted line.
"Line Amount" := SalesLine."Line Amount" / ExchangeFactor;
"Tax Liable" := SalesLine."Tax Liable";
Quantity := SalesLine."Quantity (Base)";
"Invoice Discount Amount" := SalesLine."Inv. Discount Amount";
...Nieuwe code 1
..."Round Tax" := TaxArea."Round Tax";
TaxJurisdiction.GET("Tax Jurisdiction Code");
"Is Report-to Jurisdiction" := ("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,SalesLine."Line Amount" - SalesLine."Inv. Discount Amount",ExchangeFactor,FALSE);
// End of the added line.
"Line Amount" := SalesLine."Line Amount" / ExchangeFactor;
"Tax Liable" := SalesLine."Tax Liable";
Quantity := SalesLine."Quantity (Base)";
"Invoice Discount Amount" := SalesLine."Inv. Discount Amount";
...Bestaande code 2
...END ELSE BEGIN
"Line Amount" := "Line Amount" + (SalesLine."Line Amount" / ExchangeFactor);
IF SalesLine."Tax Liable" THEN
"Tax Liable" := SalesLine."Tax Liable";
// Delete the following line.
"Tax Base Amount" := "Tax Base Amount" + ((SalesLine."Line Amount" - SalesLine."Inv. Discount Amount") / ExchangeFactor);
// End of the deleted line.
"Tax Amount" := 0;
Quantity := Quantity + SalesLine."Quantity (Base)";
"Invoice Discount Amount" := "Invoice Discount Amount" + SalesLine."Inv. Discount Amount";
MODIFY;
...Vervangende code 2
...END ELSE BEGIN
"Line Amount" := "Line Amount" + (SalesLine."Line Amount" / ExchangeFactor);
IF SalesLine."Tax Liable" THEN
"Tax Liable" := SalesLine."Tax Liable";
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,SalesLine."Line Amount" - SalesLine."Inv. Discount Amount",ExchangeFactor,TRUE);
// End of the added line.
"Tax Amount" := 0;
Quantity := Quantity + SalesLine."Quantity (Base)";
"Invoice Discount Amount" := "Invoice Discount Amount" + SalesLine."Inv. Discount Amount";
MODIFY;
... -
De code in de functie AddSalesInvoiceLines in de Codeunit in btw berekenen (398) als volgt wijzigen:
Bestaande code 1..."Is Report-to Jurisdiction" :=
("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
"Line Amount" := SalesInvoiceLine."Line Amount" / ExchangeFactor;
// Delete the following line.
"Tax Base Amount" := SalesInvoiceLine."VAT Base Amount" / ExchangeFactor;
// End of the deleted line.
Quantity := SalesInvoiceLine.Quantity;
"Tax Liable" := SalesInvoiceLine."Tax Liable";
"Calculation Order" := TaxAreaLine."Calculation Order";
InsertRec := TRUE;
...Nieuwe code 1
..."Is Report-to Jurisdiction" :=
("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
"Line Amount" := SalesInvoiceLine."Line Amount" / ExchangeFactor;
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,SalesInvoiceLine."VAT Base Amount",ExchangeFactor,FALSE);
// End of the added line.
Quantity := SalesInvoiceLine.Quantity;
"Tax Liable" := SalesInvoiceLine."Tax Liable";
"Calculation Order" := TaxAreaLine."Calculation Order";
InsertRec := TRUE;
...Bestaande code 2
...InsertRec := TRUE;
INSERT;
END ELSE BEGIN
"Line Amount" := "Line Amount" + (SalesInvoiceLine."Line Amount" / ExchangeFactor);
// Delete the following line.
"Tax Base Amount" := "Tax Base Amount" + (SalesInvoiceLine."VAT Base Amount" / ExchangeFactor);
// End of the deleted line.
Quantity := Quantity + SalesInvoiceLine.Quantity;
IF SalesInvoiceLine."Tax Liable" THEN
"Tax Liable" := SalesInvoiceLine."Tax Liable";
InsertRec := FALSE;
...Vervangende code 2
...InsertRec := TRUE;
INSERT;
END ELSE BEGIN
"Line Amount" := "Line Amount" + (SalesInvoiceLine."Line Amount" / ExchangeFactor);
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,SalesInvoiceLine."VAT Base Amount",ExchangeFactor,TRUE);
// End of the added line.
Quantity := Quantity + SalesInvoiceLine.Quantity;
IF SalesInvoiceLine."Tax Liable" THEN
"Tax Liable" := SalesInvoiceLine."Tax Liable";
InsertRec := FALSE;
... -
De code in de functie AddSalesCrMemoLines in de Codeunit in btw berekenen (398) als volgt wijzigen:
Bestaande code 1..."Is Report-to Jurisdiction" :=
("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
"Line Amount" := SalesCrMemoLine."Line Amount" / ExchangeFactor;
// Delete the following line.
"Tax Base Amount" := SalesCrMemoLine."VAT Base Amount" / ExchangeFactor;
// End of the deleted line.
Quantity := SalesCrMemoLine.Quantity;
"Tax Liable" := SalesCrMemoLine."Tax Liable";
"Calculation Order" := TaxAreaLine."Calculation Order";
InsertRec := TRUE;
...Nieuwe code 1
..."Is Report-to Jurisdiction" :=
("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
"Line Amount" := SalesCrMemoLine."Line Amount" / ExchangeFactor;
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,SalesCrMemoLine."VAT Base Amount",ExchangeFactor,FALSE);
// End of the added line.
Quantity := SalesCrMemoLine.Quantity;
"Tax Liable" := SalesCrMemoLine."Tax Liable";
"Calculation Order" := TaxAreaLine."Calculation Order";
InsertRec := TRUE;
...Bestaande code 2
...InsertRec := TRUE;
INSERT;
END ELSE BEGIN
"Line Amount" := "Line Amount" + (SalesCrMemoLine."Line Amount" / ExchangeFactor);
// Delete the following line.
"Tax Base Amount" := "Tax Base Amount" + (SalesCrMemoLine."VAT Base Amount" / ExchangeFactor);
// End of the deleted line.
Quantity := Quantity + SalesCrMemoLine.Quantity;
IF SalesCrMemoLine."Tax Liable" THEN
"Tax Liable" := SalesCrMemoLine."Tax Liable";
InsertRec := FALSE;
...Vervangende code 2
...InsertRec := TRUE;
INSERT;
END ELSE BEGIN
"Line Amount" := "Line Amount" + (SalesCrMemoLine."Line Amount" / ExchangeFactor);
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,SalesCrMemoLine."VAT Base Amount",ExchangeFactor,TRUE);
// End of the added line.
Quantity := Quantity + SalesCrMemoLine.Quantity;
IF SalesCrMemoLine."Tax Liable" THEN
"Tax Liable" := SalesCrMemoLine."Tax Liable";
InsertRec := FALSE;
... -
De code in de functie AddPurchLine in de Codeunit in btw berekenen (398) als volgt wijzigen:
Bestaande code 1..."Round Tax" := TaxArea."Round Tax";
TaxJurisdiction.GET("Tax Jurisdiction Code");
"Is Report-to Jurisdiction" := ("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
// Delete the following line.
"Tax Base Amount" := (PurchLine."Line Amount" - PurchLine."Inv. Discount Amount") / ExchangeFactor;
// End of the deleted line.
"Line Amount" := PurchLine."Line Amount" / ExchangeFactor;
"Tax Liable" := PurchLine."Tax Liable";
"Use Tax" := PurchLine."Use Tax";
...Nieuwe code 1
..."Round Tax" := TaxArea."Round Tax";
TaxJurisdiction.GET("Tax Jurisdiction Code");
"Is Report-to Jurisdiction" := ("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,PurchLine."Line Amount" - PurchLine."Inv. Discount Amount",ExchangeFactor,FALSE);
// End of the added line.
"Line Amount" := PurchLine."Line Amount" / ExchangeFactor;
"Tax Liable" := PurchLine."Tax Liable";
"Use Tax" := PurchLine."Use Tax";
...Bestaande code 2
...END ELSE BEGIN
"Line Amount" := "Line Amount" + (PurchLine."Line Amount" / ExchangeFactor);
IF PurchLine."Tax Liable" THEN
"Tax Liable" := PurchLine."Tax Liable";
// Delete the following line.
"Tax Base Amount" := "Tax Base Amount" + ((PurchLine."Line Amount" - PurchLine."Inv. Discount Amount") / ExchangeFactor);
// End of the deleted line.
"Tax Amount" := 0;
Quantity := Quantity + PurchLine."Quantity (Base)";
"Invoice Discount Amount" := "Invoice Discount Amount" + PurchLine."Inv. Discount Amount";
MODIFY;
...Vervangende code 2
...END ELSE BEGIN
"Line Amount" := "Line Amount" + (PurchLine."Line Amount" / ExchangeFactor);
IF PurchLine."Tax Liable" THEN
"Tax Liable" := PurchLine."Tax Liable";
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,PurchLine."Line Amount" - PurchLine."Inv. Discount Amount",ExchangeFactor,TRUE);
// End of the added line.
"Tax Amount" := 0;
Quantity := Quantity + PurchLine."Quantity (Base)";
"Invoice Discount Amount" := "Invoice Discount Amount" + PurchLine."Inv. Discount Amount";
MODIFY;
... -
De code in de functie AddPurchInvoiceLines in de Codeunit in btw berekenen (398) als volgt wijzigen:
Bestaande code 1..."Is Report-to Jurisdiction" :=
("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
"Line Amount" := PurchInvLine."Line Amount" / ExchangeFactor;
// Delete the following line.
"Tax Base Amount" := PurchInvLine."VAT Base Amount" / ExchangeFactor;
// End of the deleted line.
Quantity := PurchInvLine.Quantity;
"Tax Liable" := PurchInvLine."Tax Liable";
"Use Tax" := PurchInvLine."Use Tax";
...Nieuwe code 1
..."Is Report-to Jurisdiction" :=
("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
"Line Amount" := PurchInvLine."Line Amount" / ExchangeFactor;
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,PurchInvLine."VAT Base Amount",ExchangeFactor,FALSE);
// End of the added line.
Quantity := PurchInvLine.Quantity;
"Tax Liable" := PurchInvLine."Tax Liable";
"Use Tax" := PurchInvLine."Use Tax";
...Bestaande code 2
...InsertRec := TRUE;
INSERT;
END ELSE BEGIN
"Line Amount" := "Line Amount" + (PurchInvLine."Line Amount" / ExchangeFactor);
// Delete the following line.
"Tax Base Amount" := "Tax Base Amount" + (PurchInvLine."VAT Base Amount" / ExchangeFactor);
// End of the deleted line.
Quantity := Quantity + PurchInvLine.Quantity;
IF PurchInvLine."Tax Liable" THEN
"Tax Liable" := PurchInvLine."Tax Liable";
InsertRec := FALSE;
...Vervangende code 2
...InsertRec := TRUE;
INSERT;
END ELSE BEGIN
"Line Amount" := "Line Amount" + (PurchInvLine."Line Amount" / ExchangeFactor);
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,PurchInvLine."VAT Base Amount",ExchangeFactor,TRUE);
// End of the added line.
Quantity := Quantity + PurchInvLine.Quantity;
IF PurchInvLine."Tax Liable" THEN
"Tax Liable" := PurchInvLine."Tax Liable";
InsertRec := FALSE;
... -
De code in de functie AddPurchCrMemoLines in de Codeunit in btw berekenen (398) als volgt wijzigen:
Bestaande code 1..."Is Report-to Jurisdiction" :=
("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
"Line Amount" := PurchCrMemoLine."Line Amount" / ExchangeFactor;
// Delete the following line.
"Tax Base Amount" := PurchCrMemoLine."VAT Base Amount" / ExchangeFactor;
// End of the deleted line.
Quantity := PurchCrMemoLine.Quantity;
"Tax Liable" := PurchCrMemoLine."Tax Liable";
"Use Tax" := PurchCrMemoLine."Use Tax";
...Nieuwe code 1
..."Is Report-to Jurisdiction" :=
("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
"Line Amount" := PurchCrMemoLine."Line Amount" / ExchangeFactor;
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,PurchCrMemoLine."VAT Base Amount",ExchangeFactor,FALSE);
// End of the added line.
Quantity := PurchCrMemoLine.Quantity;
"Tax Liable" := PurchCrMemoLine."Tax Liable";
"Use Tax" := PurchCrMemoLine."Use Tax";
...Bestaande code 2
...InsertRec := TRUE;
INSERT;
END ELSE BEGIN
"Line Amount" := "Line Amount" + (PurchCrMemoLine."Line Amount" / ExchangeFactor);
// Delete the following line.
"Tax Base Amount" := "Tax Base Amount" + (PurchCrMemoLine."VAT Base Amount" / ExchangeFactor);
// End of the deleted line.
Quantity := Quantity + PurchCrMemoLine.Quantity;
IF PurchCrMemoLine."Tax Liable" THEN
"Tax Liable" := PurchCrMemoLine."Tax Liable";
InsertRec := FALSE;
...Vervangende code 2
...InsertRec := TRUE;
INSERT;
END ELSE BEGIN
"Line Amount" := "Line Amount" + (PurchCrMemoLine."Line Amount" / ExchangeFactor);
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,PurchCrMemoLine."VAT Base Amount",ExchangeFactor,TRUE);
// End of the added line.
Quantity := Quantity + PurchCrMemoLine.Quantity;
IF PurchCrMemoLine."Tax Liable" THEN
"Tax Liable" := PurchCrMemoLine."Tax Liable";
InsertRec := FALSE;
... -
De code in de functie AddServiceLine in de Codeunit in btw berekenen (398) als volgt wijzigen:
Bestaande code 1..."Round Tax" := TaxArea."Round Tax";
TaxJurisdiction.GET("Tax Jurisdiction Code");
"Is Report-to Jurisdiction" := ("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
// Delete the following line.
"Tax Base Amount" := (ServiceLine."Line Amount" - ServiceLine."Inv. Discount Amount") / ExchangeFactor;
// End of the deleted line.
"Line Amount" := ServiceLine."Line Amount" / ExchangeFactor;
"Tax Liable" := ServiceLine."Tax Liable";
Quantity := ServiceLine."Quantity (Base)";
"Invoice Discount Amount" := ServiceLine."Inv. Discount Amount";
...Nieuwe code 1
..."Round Tax" := TaxArea."Round Tax";
TaxJurisdiction.GET("Tax Jurisdiction Code");
"Is Report-to Jurisdiction" := ("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,ServiceLine."Line Amount" - ServiceLine."Inv. Discount Amount",ExchangeFactor,FALSE);
// End of the added line.
"Line Amount" := ServiceLine."Line Amount" / ExchangeFactor;
"Tax Liable" := ServiceLine."Tax Liable";
Quantity := ServiceLine."Quantity (Base)";
"Invoice Discount Amount" := ServiceLine."Inv. Discount Amount";
...Bestaande code 2
...END ELSE BEGIN
"Line Amount" := "Line Amount" + (ServiceLine."Line Amount" / ExchangeFactor);
IF ServiceLine."Tax Liable" THEN
"Tax Liable" := ServiceLine."Tax Liable";
// Delete the following line.
"Tax Base Amount" :=
"Tax Base Amount" + ((ServiceLine."Line Amount" - ServiceLine."Inv. Discount Amount") / ExchangeFactor);
// End of the deleted line.
"Tax Amount" := 0;
Quantity := Quantity + ServiceLine."Quantity (Base)";
"Invoice Discount Amount" := "Invoice Discount Amount" + ServiceLine."Inv. Discount Amount";
MODIFY;
...Vervangende code 2
...END ELSE BEGIN
"Line Amount" := "Line Amount" + (ServiceLine."Line Amount" / ExchangeFactor);
IF ServiceLine."Tax Liable" THEN
"Tax Liable" := ServiceLine."Tax Liable";
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,ServiceLine."Line Amount" - ServiceLine."Inv. Discount Amount",ExchangeFactor,TRUE);
// End of the added line.
"Tax Amount" := 0;
Quantity := Quantity + ServiceLine."Quantity (Base)";
"Invoice Discount Amount" := "Invoice Discount Amount" + ServiceLine."Inv. Discount Amount";
MODIFY;
... -
De code in de functie AddServInvoiceLines in de Codeunit in btw berekenen (398) als volgt wijzigen:
Bestaande code 1..."Is Report-to Jurisdiction" :=
("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
"Line Amount" := ServInvLine."Line Amount" / ExchangeFactor;
// Delete the following lines.
"Tax Base Amount" := ServInvLine."VAT Base Amount" / ExchangeFactor;
Quantity := ServInvLine.Quantity;
"Tax Liable" := ServInvLine."Tax Liable";
// End of the deleted line.
"Calculation Order" := TaxAreaLine."Calculation Order";
InsertRec := TRUE;
INSERT;
...Nieuwe code 1
..."Is Report-to Jurisdiction" :=
("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
"Line Amount" := ServInvLine."Line Amount" / ExchangeFactor;
// Add the following lines.
SetTaxBaseAmount(TempSalesTaxLine,ServInvLine."VAT Base Amount",ExchangeFactor,FALSE);
Quantity := ServInvLine.Quantity;
"Tax Liable" := ServInvLine."Tax Liable";
// End of the added lines.
"Calculation Order" := TaxAreaLine."Calculation Order";
InsertRec := TRUE;
INSERT;
...Bestaande code 2
...InsertRec := TRUE;
INSERT;
END ELSE BEGIN
"Line Amount" := "Line Amount" + (ServInvLine."Line Amount" / ExchangeFactor);
// Delete the following line.
"Tax Base Amount" := "Tax Base Amount" + (ServInvLine."VAT Base Amount" / ExchangeFactor);
// End of the deleted line.
Quantity := Quantity + ServInvLine.Quantity;
IF ServInvLine."Tax Liable" THEN
"Tax Liable" := ServInvLine."Tax Liable";
InsertRec := FALSE;
...Vervangende code 2
...InsertRec := TRUE;
INSERT;
END ELSE BEGIN
"Line Amount" := "Line Amount" + (ServInvLine."Line Amount" / ExchangeFactor);
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,ServInvLine."VAT Base Amount",ExchangeFactor,TRUE);
// End of the added line.
Quantity := Quantity + ServInvLine.Quantity;
IF ServInvLine."Tax Liable" THEN
"Tax Liable" := ServInvLine."Tax Liable";
InsertRec := FALSE;
... -
De code in de functie AddServCrMemoLines in de Codeunit in btw berekenen (398) als volgt wijzigen:
Bestaande code 1..."Is Report-to Jurisdiction" :=
("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
"Line Amount" := ServCrMemoLine."Line Amount" / ExchangeFactor;
// Delete the following line.
"Tax Base Amount" := ServCrMemoLine."VAT Base Amount" / ExchangeFactor;
// End of the deleted line.
Quantity := ServCrMemoLine.Quantity;
"Tax Liable" := ServCrMemoLine."Tax Liable";
"Calculation Order" := TaxAreaLine."Calculation Order";
...Nieuwe code 1
..."Is Report-to Jurisdiction" :=
("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
"Line Amount" := ServCrMemoLine."Line Amount" / ExchangeFactor;
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,ServCrMemoLine."VAT Base Amount",ExchangeFactor,FALSE);
// End of the added line.
Quantity := ServCrMemoLine.Quantity;
"Tax Liable" := ServCrMemoLine."Tax Liable";
"Calculation Order" := TaxAreaLine."Calculation Order";
...Bestaande code 2
...InsertRec := TRUE;
INSERT;
END ELSE BEGIN
"Line Amount" := "Line Amount" + (ServCrMemoLine."Line Amount" / ExchangeFactor);
// Delete the following line.
"Tax Base Amount" := "Tax Base Amount" + (ServCrMemoLine."VAT Base Amount" / ExchangeFactor);
// End of the deleted line.
Quantity := Quantity + ServCrMemoLine.Quantity;
IF ServCrMemoLine."Tax Liable" THEN
"Tax Liable" := ServCrMemoLine."Tax Liable";
InsertRec := FALSE;
...Vervangende code 2
...InsertRec := TRUE;
INSERT;
END ELSE BEGIN
"Line Amount" := "Line Amount" + (ServCrMemoLine."Line Amount" / ExchangeFactor);
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,ServCrMemoLine."VAT Base Amount",ExchangeFactor,TRUE);
// End of the added line.
Quantity := Quantity + ServCrMemoLine.Quantity;
IF ServCrMemoLine."Tax Liable" THEN
"Tax Liable" := ServCrMemoLine."Tax Liable";
InsertRec := FALSE;
... -
Een functie SetTaxBaseAmount in de Codeunit in btw berekenen (398) als volgt toevoegen:
LOCAL PROCEDURE SetTaxBaseAmount@1020031(VAR SalesTaxAmountLine@1020001 : Record 10011;Value@1020000 : Decimal;ExchangeFactor@1020002 : Decimal;Increment@1020003 : Boolean); BEGIN
WITH SalesTaxAmountLine DO BEGIN
IF Increment THEN
"Tax Base Amount FCY" += Value
ELSE
"Tax Base Amount FCY" := Value;
"Tax Base Amount" := "Tax Base Amount FCY" / ExchangeFactor;
END;
END;
Vereisten
Hebt u een van de volgende producten geïnstalleerd om deze hotfix:
-
De Noord-Amerikaanse versie van Microsoft Dynamics NAV 2009 R2
-
De Noord-Amerikaanse versie van Microsoft Dynamics NAV 2009 Service Pack 1
Informatie over verwijderen
U kunt deze hotfix niet verwijderen.
Status
Microsoft heeft bevestigd dat dit probleem kan optreden in de Microsoft-producten die worden vermeld in de sectie 'Van toepassing op'.
Opmerking Dit is een 'Snel publiceren' artikel dat rechtstreeks door het ondersteuningsteam van Microsoft is gemaakt. De informatie wordt geleverd zoals het is in reactie op de opkomende problemen. Omdat het artikel snel beschikbaar moest zijn, kunnen de materialen typografische fouten bevatten en op elk gewenst moment zonder voorafgaande kennisgeving worden gewijzigd. Zie de Gebruiksvoorwaarden voor andere overwegingen.
