In dit artikel wordt een probleem beschreven wanneer u de voorraad ontvangen niet gefactureerd en verzonden materieel niet gefactureerd rapporten afdrukt in het Verenigd Koninkrijk lokalisatie van Microsoft Dynamics NAV 2009. Dit probleem doet zich nog steeds na implementatie van KB 2882942.
Volg de stappen in de sectie codewijzigingen oplossen van dit probleem. Dit probleem treedt op in de volgende producten:
-
Het Verenigd Koninkrijk lokalisatie van Microsoft Dynamics NAV 2009 R2
-
Het Verenigd Koninkrijk lokalisatie van Microsoft Dynamics NAV 2009 Service Pack 1 (SP1)
Oplossing
Informatie over de hotfix
Een ondersteunde hotfix is nu beschikbaar bij Microsoft. Het is echter alleen bedoeld om het probleem dat wordt beschreven in dit artikel. Pas deze alleen toe op systemen waarop dit specifieke probleem zich voordoet. Deze hotfix moet wellicht extra worden getest. Als u geen ernstige problemen ondervindt, is het daarom raadzaam te wachten op het volgende servicepack voor Microsoft Dynamics NAV 2009 of de volgende Microsoft Dynamics NAV versie waarin deze hotfix is opgenomen.
Opmerking In speciale gevallen kunnen kosten die verbonden zijn aan ondersteuningsoproepen ondersteuning worden geannuleerd als een medewerker van Technical Support voor Microsoft Dynamics en verwante producten bepaalt dat een specifieke update de oplossing van uw probleem. De normale ondersteuningskosten blijven gelden voor extra ondersteuningsvragen die niet in aanmerking voor de specifieke update in kwestie komen.
Informatie over de installatie
Microsoft verstrekt programmeervoorbeelden uitsluitend ter illustratie, zonder expliciete of impliciete garantie. Dit omvat, maar is niet beperkt tot, de impliciete garanties van verkoopbaarheid of geschiktheid voor een bepaald doel. In dit artikel wordt ervan uitgegaan dat u bekend met de programmeertaal die wordt aangetoond en met de hulpprogramma's die worden gebruikt bent voor het maken van en naar procedures voor foutopsporing. Ondersteuningstechnici van Microsoft kunnen voor uitleg over de functionaliteit van een bepaalde procedure. Zij zal deze voorbeelden bieden extra functionaliteit of desgewenst uw specifieke vereisten echter niet wijzigen.
Opmerking Voordat u deze hotfix hebt geïnstalleerd, controleert u of dat alle gebruikers van Microsoft Dynamics NAV-clients zijn afgemeld bij het systeem. Dit omvat services voor Microsoft Dynamics NAV Application Server (NAS). U moet de alleen clientgebruiker die is aangemeld wanneer u deze hotfix gaat implementeren.
Als u deze hotfix gaat implementeren, hebt u een ontwikkelaarslicentie voor.
Is raadzaam dat de gebruikersaccount in het venster Windows-aanmeldingen of Databaseaanmeldingen de rol-id 'SUPER'. Als de gebruikersaccount kan worden toegewezen als de ID 'SUPER' rol, moet u controleren of de gebruikersaccount de volgende machtigingen heeft:
-
De machtiging wijzigen voor het object dat u wijzigt.
-
De machtiging uitvoeren voor het object System Object ID 5210 en voor de System Object ID 9015
-object.
Opmerking Er geen rechten voor de opgeslagen gegevens hebben, tenzij u gegevens herstellen.
Codewijzigingen
Opmerking Altijd test code worden opgelost in een testomgeving voordat u de correcties in de productieomgeving.
U kunt dit probleem oplossen door de volgende stappen uit te voeren:
-
Wijzig de code in een Item nummer 1, secties in de voorraad ontvangen gegevens niet gefactureerd rapport (10540) als volgt:
Bestaande code 1...VertAlign=Bottom;
FontBold=Yes;
MultiLine=Yes;
DataSetFieldName=Item_Ledger_Entry__Cost_Amount__Expected__Caption }
{ 1040042;Label ;5700 ;0 ;1550 ;846 ;ParentControl=1040040;
VertAlign=Bottom;
...Nieuwe code 1
...VertAlign=Bottom;
FontBold=Yes;
MultiLine=Yes;
// Adding the following line.
CaptionML=ENU=Cost Amount (Expected);
// End of the added line.
DataSetFieldName=Item_Ledger_Entry__Cost_Amount__Expected__Caption }
{ 1040042;Label ;5700 ;0 ;1550 ;846 ;ParentControl=1040040;
VertAlign=Bottom;
...Bestaande code 2
...SourceExpr="Value Entry"."Invoiced Quantity";
DataSetFieldName=Item_Ledger_Entry___Invoiced_Quantity_ }
{ 1040039;TextBox ;13050;0 ;1800 ;423 ;FontBold=Yes;
// Deleting the following line.
SourceExpr="Item Ledger Entry"."Cost Amount (Expected)";
// End of the deleted line.
DataSetFieldName=Item_Ledger_Entry___Cost_Amount__Expected__ }
{ 1040045;TextBox ;0 ;0 ;5400 ;423 ;FontBold=Yes;
SourceExpr=Text1040005 + ' ' + Item."No.";
...Vervangende code 2
...SourceExpr="Value Entry"."Invoiced Quantity";
DataSetFieldName=Item_Ledger_Entry___Invoiced_Quantity_ }
{ 1040039;TextBox ;13050;0 ;1800 ;423 ;FontBold=Yes;
// Adding the following line.
SourceExpr=ItemCostAmtExpected;
// End of the added line.
DataSetFieldName=Item_Ledger_Entry___Cost_Amount__Expected__ }
{ 1040045;TextBox ;0 ;0 ;5400 ;423 ;FontBold=Yes;
SourceExpr=Text1040005 + ' ' + Item."No.";
...Bestaande code 3
...DataSetFieldName=Value_Entry___Cost_Amount__Actual__ }
{ 1040059;TextBox ;7350 ;0 ;1550 ;423 ;FontBold=Yes;
CaptionML=ENU=Rec. not invoiced;
// Deleting the following line.
SourceExpr="Item Ledger Entry"."Cost Amount (Expected)" - "Value Entry"."Cost Amount (Actual)";
// End of the deleted line.
DataSetFieldName=Item_Ledger_Entry___Cost_Amount__Expected______Value_Entry___Cost_Amount__Actual__ }
{ 1040064;TextBox ;15000;0 ;1500 ;423 ;FontBold=Yes;
SourceExpr="Value Entry"."Invoiced Quantity";
...Vervangende code 3
...DataSetFieldName=Value_Entry___Cost_Amount__Actual__ }
{ 1040059;TextBox ;7350 ;0 ;1550 ;423 ;FontBold=Yes;
CaptionML=ENU=Rec. not invoiced;
// Adding the following line.
SourceExpr=ItemCostAmtExpected - ValueCostAmtActual;
// End of the added line.
DataSetFieldName=Item_Ledger_Entry___Cost_Amount__Expected______Value_Entry___Cost_Amount__Actual__ }
{ 1040064;TextBox ;15000;0 ;1500 ;423 ;FontBold=Yes;
SourceExpr="Value Entry"."Invoiced Quantity";
...Bestaande code 4
...DataSetFieldName=Item_Ledger_Entry___Invoiced_Quantity__Control1040067 }
{ 1040068;TextBox ;13050;423 ;1800 ;423 ;FontSize=7;
FontBold=Yes;
// Deleting the following lines.
SourceExpr="Item Ledger Entry"."Cost Amount (Expected)";
DataSetFieldName=Item_Ledger_Entry___Cost_Amount__Expected___Control1040068 }
{ 1040069;TextBox ;7350 ;423 ;1550 ;423 ;FontSize=7;
FontBold=Yes;
CaptionML=ENU=Rec. not invoiced;
SourceExpr="Item Ledger Entry"."Cost Amount (Expected)" - "Value Entry"."Cost Amount (Actual)";
// End of the deleted lines.
DataSetFieldName=Item_Ledger_Entry___Cost_Amount__Expected______Value_Entry___Cost_Amount__Actual___Control1040069 }
{ 1040070;TextBox ;15000;423 ;1500 ;423 ;FontSize=7;
FontBold=Yes;
...Vervangende code 4
...DataSetFieldName=Item_Ledger_Entry___Invoiced_Quantity__Control1040067 }
{ 1040068;TextBox ;13050;423 ;1800 ;423 ;FontSize=7;
FontBold=Yes;
// Adding the following lines.
SourceExpr=ItemCostAmtExpectedTotal }
{ 1040069;TextBox ;7350 ;423 ;1550 ;423 ;FontSize=7;
FontBold=Yes;
CaptionML=ENU=Rec. not invoiced;
SourceExpr=ItemCostAmtExpectedTotal - ValueCostAmtActualTotal;
// End of the added lines.
DataSetFieldName=Item_Ledger_Entry___Cost_Amount__Expected______Value_Entry___Cost_Amount__Actual___Control1040069 }
{ 1040070;TextBox ;15000;423 ;1500 ;423 ;FontSize=7;
FontBold=Yes;
...Bestaande code 5
...ForeColor=65535;
SourceExpr=ItemInvoicedQtyTotal;
DataSetFieldName=ItemInvoicedQtyTotal }
// Delete the following lines.
{ 1040103;TextBox ;300 ;0 ;150 ;423 ;Name=ItemCostAmtExpectedTotal;
Visible=No;
ForeColor=65535;
SourceExpr=ItemCostAmtExpectedTotal;
DataSetFieldName=ItemCostAmtExpectedTotal }
// End of the deleted lines.
{ 1040104;TextBox ;0 ;0 ;150 ;423 ;Name=ItemReceivedQtyTotal;
Visible=No;
ForeColor=65535;
...Vervangende code 5
...ForeColor=65535;
SourceExpr=ItemInvoicedQtyTotal;
DataSetFieldName=ItemInvoicedQtyTotal }
{ 1040104;TextBox ;0 ;0 ;150 ;423 ;Name=ItemReceivedQtyTotal;
Visible=No;
ForeColor=65535;
... -
Wijzig de code in secties van Data Item nummer 2 in de voorraad ontvangen niet-gefactureerde rapport (10540) als volgt:
Bestaande code 1...NoOfItems := NoOfItems + 1;
CurrReport.CREATETOTALS(Quantity,"Invoiced Quantity","Cost Amount (Expected)");
CurrReport.CREATETOTALS("Value Entry"."Cost Amount (Actual)","Value Entry"."Invoiced Quantity");
// Delete the following lines.
// GB1004.begin
ItemReceivedQty += Quantity;
ItemInvoicedQty += "Invoiced Quantity";
ItemCostAmtExpected += "Cost Amount (Expected)";
ItemReceivedQtyTotal += Quantity;
ItemInvoicedQtyTotal += "Invoiced Quantity";
ItemCostAmtExpectedTotal += "Cost Amount (Expected)";
// End of the deleted lines.
// GB1004.end
END;
...Nieuwe code 1
...NoOfItems := NoOfItems + 1;
CurrReport.CREATETOTALS(Quantity,"Invoiced Quantity","Cost Amount (Expected)");
CurrReport.CREATETOTALS("Value Entry"."Cost Amount (Actual)","Value Entry"."Invoiced Quantity");
// Add the following lines.
CALCFIELDS("Cost Amount (Actual)");
CALCFIELDS("Cost Amount (Expected)");
// GB1004.begin
ItemReceivedQty += Quantity;
ItemInvoicedQty += "Invoiced Quantity";
ItemCostAmtExpected += "Cost Amount (Expected)" + "Cost Amount (Actual)";
ItemReceivedQtyTotal += Quantity;
ItemInvoicedQtyTotal += "Invoiced Quantity";
ItemCostAmtExpectedTotal += "Cost Amount (Expected)" + "Cost Amount (Actual)";
// End of the added lines.
// GB1004.end
END;
...Bestaande code 2
...{ 1040047;TextBox ;2100 ;0 ;1500 ;423 ;HorzAlign=Left;
SourceExpr="Source No.";
DataSetFieldName=Item_Ledger_Entry__Source_No__ }
// Delete the following line.
{ 1040030;TextBox ;13050;0 ;1800 ;423 ;SourceExpr="Cost Amount (Expected)";
// End of the deleted line.
DataSetFieldName=Item_Ledger_Entry__Cost_Amount__Expected__ }
}
}
...Vervangende code 2
...{ 1040047;TextBox ;2100 ;0 ;1500 ;423 ;HorzAlign=Left;
SourceExpr="Source No.";
DataSetFieldName=Item_Ledger_Entry__Source_No__ }
// Add the following line.
{ 1040030;TextBox ;13050;0 ;1800 ;423 ;SourceExpr="Cost Amount (Expected)" + "Cost Amount (Actual)";
// End of the added line.
DataSetFieldName=Item_Ledger_Entry__Cost_Amount__Expected__ }
}
}
...Bestaande code 3
...SourceExpr="Value Entry"."Invoiced Quantity";
DataSetFieldName=Item_Ledger_Entry__Item_Ledger_Entry___Invoiced_Quantity_ }
{ 1040076;TextBox ;13050;0 ;1800 ;423 ;FontBold=Yes;
// Delete the following line.
SourceExpr="Item Ledger Entry"."Cost Amount (Expected)";
// End of the deleted line.
DataSetFieldName=Item_Ledger_Entry__Item_Ledger_Entry___Cost_Amount__Expected__ }
{ 1040079;TextBox ;0 ;0 ;5400 ;423 ;FontBold=Yes;
SourceExpr=Text1040005 + ' ' + Item."No.";
...Vervangende code 3
...SourceExpr="Value Entry"."Invoiced Quantity";
DataSetFieldName=Item_Ledger_Entry__Item_Ledger_Entry___Invoiced_Quantity_ }
{ 1040076;TextBox ;13050;0 ;1800 ;423 ;FontBold=Yes;
// Add the following line.
SourceExpr=ItemCostAmtExpected;
// End of the added line.
DataSetFieldName=Item_Ledger_Entry__Item_Ledger_Entry___Cost_Amount__Expected__ }
{ 1040079;TextBox ;0 ;0 ;5400 ;423 ;FontBold=Yes;
SourceExpr=Text1040005 + ' ' + Item."No.";
...Bestaande code 4
...DataSetFieldName=Item_Ledger_Entry__Quantity____Item_Ledger_Entry___Invoiced_Quantity__Control1040080 }
{ 1040081;TextBox ;7350 ;0 ;1550 ;423 ;FontBold=Yes;
CaptionML=ENU=Cost;
// Delete the following line.
SourceExpr="Item Ledger Entry"."Cost Amount (Expected)" - "Value Entry"."Cost Amount (Actual)";
// End of the deleted line.
DataSetFieldName=Item_Ledger_Entry___Cost_Amount__Expected______Value_Entry___Cost_Amount__Actual___Control1040081 }
{ 1040078;TextBox ;18000;0 ;150 ;423 ;Name=NoOfItems;
Visible=No;
...Vervangende code 4
...DataSetFieldName=Item_Ledger_Entry__Quantity____Item_Ledger_Entry___Invoiced_Quantity__Control1040080 }
{ 1040081;TextBox ;7350 ;0 ;1550 ;423 ;FontBold=Yes;
CaptionML=ENU=Cost;
// Add the following line.
SourceExpr=ItemCostAmtExpected - ValueCostAmtActual;
// End of the added line.
DataSetFieldName=Item_Ledger_Entry___Cost_Amount__Expected______Value_Entry___Cost_Amount__Actual___Control1040081 }
{ 1040078;TextBox ;18000;0 ;150 ;423 ;Name=NoOfItems;
Visible=No;
... -
Wijzig de code in secties van Data Item nummer 3 in de voorraad ontvangen niet-gefactureerde rapport (10540) als volgt:
Bestaande code 1...OnPreDataItem=BEGIN
IF EndDate <> 0D THEN
SETRANGE("Posting Date",0D,EndDate);
// Delete the following line.
SETFILTER("Invoiced Quantity",'<>%1',0);
CurrReport.CREATETOTALS("Cost Amount (Actual)","Invoiced Quantity");
// End of the deleted line.
END;
OnAfterGetRecord=BEGIN
...Nieuwe code 1
...OnPreDataItem=BEGIN
IF EndDate <> 0D THEN
SETRANGE("Posting Date",0D,EndDate);
// Add the following lines.
CurrReport.CREATETOTALS("Cost Amount (Actual)","Invoiced Quantity");
LastDocumentNo := '';
// End of the added lines.
END;
OnAfterGetRecord=BEGIN
...Bestaande code 2
...ValueInvoicedQty += "Invoiced Quantity";
ValueCostAmtActualTotal += "Cost Amount (Actual)";
ValueInvoicedQtyTotal += "Invoiced Quantity";
// GB1004.end
END;
...Vervangende code 2
...ValueInvoicedQty += "Invoiced Quantity";
ValueCostAmtActualTotal += "Cost Amount (Actual)";
ValueInvoicedQtyTotal += "Invoiced Quantity";
// Add the following line.
CalcSumDocumentNo("Value Entry");
// End of the added line.
// GB1004.end
END;
...Bestaande code 3
...SectionWidth=18150;
SectionHeight=423;
OnPreSection=BEGIN
// Delete the following line.
CurrReport.SHOWOUTPUT(PrintDetails);
// End of the deleted line.
END;
}
...Vervangende code 3
...SectionWidth=18150;
SectionHeight=423;
OnPreSection=BEGIN
// Add the following line.
CurrReport.SHOWOUTPUT(PrintDetails AND ("Invoiced Quantity" <> 0));
// End of the added line.
END;
}
... -
Wijzig de code in de globale variabelen in de voorraad ontvangen niet-gefactureerde rapport (10540) als volgt:
Bestaande code...</TableCell>
</TableCells>
<Visibility>
// Delete the following line.
<Hidden>=iif (Fields!PrintDetails.Value and Fields!Value_Entry_Entry_No_.Value > 0,FALSE,TRUE)</Hidden>
// End of the deleted line.
</Visibility>
</TableRow>
</TableRows>
...Nieuwe code
...</TableCell>
</TableCells>
<Visibility>
// Adding the following line.
<Hidden>=iif (Fields!PrintDetails.Value and Fields!Value_Entry_Entry_No_.Value and Fields!Value_Entry__Invoiced_Quantity_.Value <> 0,FALSE,TRUE)</Hidden>
// End of the added line.
</Visibility>
</TableRow>
</TableRows>
... -
Wijzig de code in secties van Data Item nummer 1 in de voorraad verzonden niet gefactureerd rapport (10541) als volgt:
Bestaande code 1...VertAlign=Bottom;
FontBold=Yes;
MultiLine=Yes;
DataSetFieldName=Value_Entry__Cost_Amount__Actual__Caption }
{ 1040026;Label ;15000;846 ;1500 ;846 ;ParentControl=1040025;
HorzAlign=Right;
...Nieuwe code 1
...VertAlign=Bottom;
FontBold=Yes;
MultiLine=Yes;
// Add the following line.
CaptionML=ENU=Cost Amount (Actual);
// End of the added line.
DataSetFieldName=Value_Entry__Cost_Amount__Actual__Caption }
{ 1040026;Label ;15000;846 ;1500 ;846 ;ParentControl=1040025;
HorzAlign=Right;
...Bestaande code 2
...VertAlign=Bottom;
FontBold=Yes;
MultiLine=Yes;
DataSetFieldName=Item_Ledger_Entry__Cost_Amount__Expected__Caption }
{ 1040042;Label ;5700 ;0 ;1550 ;846 ;ParentControl=1040040;
VertAlign=Bottom;
...Vervangende code 2
...VertAlign=Bottom;
FontBold=Yes;
MultiLine=Yes;
// Add the following line.
CaptionML=ENU=Cost Amount (Expected);
// End of the added line.
DataSetFieldName=Item_Ledger_Entry__Cost_Amount__Expected__Caption }
{ 1040042;Label ;5700 ;0 ;1550 ;846 ;ParentControl=1040040;
VertAlign=Bottom;
...Bestaande code 3
...SourceExpr=Text1040005 + ' ' + Item."No.";
DataSetFieldName=Text1040005_________Item__No__ }
{ 1040054;TextBox ;16650;0 ;1500 ;423 ;FontBold=Yes;
// Delete the following line.
SourceExpr="Value Entry"."Cost Amount (Actual)";
// End of the deleted line.
DataSetFieldName=Value_Entry___Cost_Amount__Actual__ }
{ 1040059;TextBox ;7350 ;0 ;1550 ;423 ;FontBold=Yes;
CaptionML=ENU=Rec. not invoiced;
...Vervangende code 3
...SourceExpr=Text1040005 + ' ' + Item."No.";
DataSetFieldName=Text1040005_________Item__No__ }
{ 1040054;TextBox ;16650;0 ;1500 ;423 ;FontBold=Yes;
// Add the following line.
SourceExpr=-"Value Entry"."Cost Amount (Actual)";
// End of the added line.
DataSetFieldName=Value_Entry___Cost_Amount__Actual__ }
{ 1040059;TextBox ;7350 ;0 ;1550 ;423 ;FontBold=Yes;
CaptionML=ENU=Rec. not invoiced;
...Bestaande code 4
...DataSetFieldName=Value_Entry___Invoiced_Quantity__Control1040070 }
{ 1040071;TextBox ;16650;423 ;1500 ;423 ;FontSize=7;
FontBold=Yes;
// Delete the following line.
SourceExpr="Value Entry"."Cost Amount (Actual)";
// End of the deleted line.
DataSetFieldName=Value_Entry___Cost_Amount__Actual___Control1040071 }
{ 1040072;Label ;0 ;423 ;5550 ;423 ;FontSize=9;
FontBold=Yes;
...Vervangende code 4
...DataSetFieldName=Value_Entry___Invoiced_Quantity__Control1040070 }
{ 1040071;TextBox ;16650;423 ;1500 ;423 ;FontSize=7;
FontBold=Yes;
// Add the following line.
SourceExpr=-"Value Entry"."Cost Amount (Actual)";
// End of the added line.
DataSetFieldName=Value_Entry___Cost_Amount__Actual___Control1040071 }
{ 1040072;Label ;0 ;423 ;5550 ;423 ;FontSize=9;
FontBold=Yes;
... -
Wijzig de code in Data Item nummer 2 in de voorraad verzonden niet gefactureerd rapport (10541) als volgt:
Bestaande code 1...OnAfterGetRecord=BEGIN
NoOfItems := NoOfItems + 1;
CurrReport.CREATETOTALS("Value Entry"."Cost Amount (Actual)","Value Entry"."Invoiced Quantity");
// Delete the following lines.
ItemCostAmount += "Cost Amount (Expected)";
ItemShippedQty += -Quantity;
ItemInvoicedQty += -"Invoiced Quantity";
ItemCostAmtExpected += "Cost Amount (Expected)";
ItemCostAmountTotal += "Cost Amount (Expected)";
ItemShippedQtyTotal += -Quantity;
ItemInvoicedQtyTotal += -"Invoiced Quantity";
ItemCostAmtExpectedTotal += "Cost Amount (Expected)";
// End of the deleted lines.
END;
DataItemLink=Item No.=FIELD(No.);
...Nieuwe code 1
...OnAfterGetRecord=BEGIN
NoOfItems := NoOfItems + 1;
CurrReport.CREATETOTALS("Value Entry"."Cost Amount (Actual)","Value Entry"."Invoiced Quantity");
// Add the following lines.
CALCFIELDS("Cost Amount (Actual)");
CALCFIELDS("Cost Amount (Expected)");
ItemCostAmount -= ("Cost Amount (Expected)" + "Cost Amount (Actual)");
ItemShippedQty -= Quantity;
ItemInvoicedQty -= "Invoiced Quantity";
ItemCostAmtExpected -= ("Cost Amount (Expected)" + "Cost Amount (Actual)");
ItemCostAmountTotal -= ("Cost Amount (Expected)" + "Cost Amount (Actual)");
ItemShippedQtyTotal -= Quantity;
ItemInvoicedQtyTotal -= "Invoiced Quantity";
ItemCostAmtExpectedTotal -= ("Cost Amount (Expected)" + "Cost Amount (Actual)");
// End of the added lines.
END;
DataItemLink=Item No.=FIELD(No.);
...Bestaande code 2
...{ 1040047;TextBox ;2100 ;0 ;1500 ;423 ;HorzAlign=Left;
SourceExpr="Source No.";
DataSetFieldName=Item_Ledger_Entry__Source_No__ }
// Delete the following line.
{ 1040030;TextBox ;13050;0 ;1800 ;423 ;SourceExpr="Cost Amount (Expected)";
// End of the deleted line.
DataSetFieldName=Item_Ledger_Entry__Cost_Amount__Expected__ }
{ 1040082;TextBox ;18000;0 ;150 ;423 ;Name="Entry No.";
Visible=No;
...Vervangende code 2
...{ 1040047;TextBox ;2100 ;0 ;1500 ;423 ;HorzAlign=Left;
SourceExpr="Source No.";
DataSetFieldName=Item_Ledger_Entry__Source_No__ }
// Add the following line.
{ 1040030;TextBox ;13050;0 ;1800 ;423 ;SourceExpr=-("Cost Amount (Expected)" + "Cost Amount (Actual)");
// End of the added line.
DataSetFieldName=Item_Ledger_Entry__Cost_Amount__Expected__ }
{ 1040082;TextBox ;18000;0 ;150 ;423 ;Name="Entry No.";
Visible=No;
... -
Wijzig de code in Data Item nummer 3 in de voorraad verzonden niet gefactureerd rapport (10541) als volgt:
Bestaande code 1...OnPreDataItem=BEGIN
IF EndDate <> 0D THEN
SETRANGE("Posting Date",0D,EndDate);
// Delete the following lines.
SETFILTER("Invoiced Quantity",'<>%1',0);
CurrReport.CREATETOTALS("Cost Amount (Actual)","Invoiced Quantity");
END;
OnAfterGetRecord=BEGIN
ValueInvoicedQty += -"Invoiced Quantity";
ValueCostAmtActual += "Cost Amount (Actual)";
ValueInvoicedQtyTotal += -"Invoiced Quantity";
ValueCostAmtActualTotal += "Cost Amount (Actual)";
// End of the deleted lines.
END;
DataItemLink=Item Ledger Entry No.=FIELD(Entry No.);
...Nieuwe code 1
...OnPreDataItem=BEGIN
IF EndDate <> 0D THEN
SETRANGE("Posting Date",0D,EndDate);
// Add the following lines.
CurrReport.CREATETOTALS("Cost Amount (Actual)","Invoiced Quantity");
LastDocumentNo := '';
END;
OnAfterGetRecord=BEGIN
ValueInvoicedQty -= "Invoiced Quantity";
ValueCostAmtActual -= "Cost Amount (Actual)";
ValueInvoicedQtyTotal -= "Invoiced Quantity";
ValueCostAmtActualTotal -= "Cost Amount (Actual)";
CalcSumDocumentNo("Value Entry");
// End of the added lines.
END;
DataItemLink=Item Ledger Entry No.=FIELD(Entry No.);
...Bestaande code 3
...SectionWidth=18150;
SectionHeight=423;
OnPreSection=BEGIN
// Delete the following line.
CurrReport.SHOWOUTPUT(PrintDetails);
// End of the deleted line.
END;
}
...Vervangende code 3
...SectionWidth=18150;
SectionHeight=423;
OnPreSection=BEGIN
// Add the following line.
CurrReport.SHOWOUTPUT(PrintDetails AND ("Invoiced Quantity" <> 0));
// End of the added line.
END;
}
...Bestaande code 4
...{ 1040025;TextBox ;15000;0 ;1500 ;423 ;CaptionML=ENU=Invoiced Quantity;
SourceExpr=-"Invoiced Quantity";
DataSetFieldName=Value_Entry__Invoiced_Quantity_ }
// Delete the following line.
{ 1040027;TextBox ;16650;0 ;1500 ;423 ;SourceExpr="Cost Amount (Actual)";
// End of the deleted line.
DataSetFieldName=Value_Entry__Cost_Amount__Actual__ }
}
}
...Vervangende code 4
...{ 1040025;TextBox ;15000;0 ;1500 ;423 ;CaptionML=ENU=Invoiced Quantity;
SourceExpr=-"Invoiced Quantity";
DataSetFieldName=Value_Entry__Invoiced_Quantity_ }
// Add the following line.
{ 1040027;TextBox ;16650;0 ;1500 ;423 ;SourceExpr=-"Cost Amount (Actual)";
// End of the added line.
DataSetFieldName=Value_Entry__Cost_Amount__Actual__ }
}
}
... -
Wijzig de code in Data Item nummer 4 in de voorraad verzonden niet gefactureerd rapport (10541) als volgt:
Bestaande code...SourceExpr=-"Value Entry"."Invoiced Quantity";
DataSetFieldName=Value_Entry___Invoiced_Quantity__Control1040036 }
{ 1040044;TextBox ;16650;0 ;1500 ;423 ;FontBold=Yes;
// Delete the following line.
SourceExpr="Value Entry"."Cost Amount (Actual)";
// End of the deleted line.
DataSetFieldName=Value_Entry___Cost_Amount__Actual___Control1040044 }
{ 1040029;TextBox ;0 ;0 ;5400 ;423 ;FontBold=Yes;
SourceExpr=Text1040005 + ' ' + Item."No.";
...Nieuwe code
...SourceExpr=-"Value Entry"."Invoiced Quantity";
DataSetFieldName=Value_Entry___Invoiced_Quantity__Control1040036 }
{ 1040044;TextBox ;16650;0 ;1500 ;423 ;FontBold=Yes;
// Add the following line.
SourceExpr=-"Value Entry"."Cost Amount (Actual)";
// End of the added line.
DataSetFieldName=Value_Entry___Cost_Amount__Actual___Control1040044 }
{ 1040029;TextBox ;0 ;0 ;5400 ;423 ;FontBold=Yes;
SourceExpr=Text1040005 + ' ' + Item."No.";
... -
Wijzig de code in de globale variabelen in de voorraad verzonden niet gefactureerd rapport (10541) als volgt:
Bestaande code 1...ItemCostAmtExpectedTotal@1040016 : Decimal;
ValueInvoicedQtyTotal@1040019 : Decimal;
ValueCostAmtActualTotal@1040020 : Decimal;
BEGIN
{
...Nieuwe code 1
...ItemCostAmtExpectedTotal@1040016 : Decimal;
ValueInvoicedQtyTotal@1040019 : Decimal;
ValueCostAmtActualTotal@1040020 : Decimal;
// Add the following lines.
LastDocumentNo@1040023 : Code[20];
LOCAL PROCEDURE CalcSumDocumentNo@1040000(VAR ValueEntry@1040000 : Record 5802);
VAR
ValueEntry1@1040001 : Record 5802;
ValueCostAmtActualPer@1040002 : Decimal;
ValueIncoicedQtyPer@1040003 : Decimal;
BEGIN
IF LastDocumentNo = ValueEntry."Document No." THEN BEGIN
ValueEntry."Cost Amount (Actual)" := 0;
ValueEntry."Invoiced Quantity" := 0;
END ELSE BEGIN
WITH ValueEntry1 DO BEGIN
COPYFILTERS(ValueEntry);
SETRANGE("Document No.",ValueEntry."Document No.");
IF FINDSET THEN
REPEAT
ValueCostAmtActualPer += "Cost Amount (Actual)";
ValueIncoicedQtyPer += "Invoiced Quantity";
UNTIL NEXT = 0;
END;
ValueEntry."Cost Amount (Actual)" := ValueCostAmtActualPer;
ValueEntry."Invoiced Quantity" := ValueIncoicedQtyPer;
LastDocumentNo := ValueEntry."Document No.";
END;
END;
// End of the added lines.
BEGIN
{
...Bestaande code 2
...</TableCell>
</TableCells>
<Visibility>
// Delete the following line.
<Hidden>=IIF(First(Fields!PrintDetails.Value) And (Fields!Value_Entry__Document_No__.Value<>""),False,True)</Hidden>
// End of the deleted line.
</Visibility>
</TableRow>
</TableRows>
...Vervangende code 2
...</TableCell>
</TableCells>
<Visibility>
// Add the following line.
<Hidden>=IIF(First(Fields!PrintDetails.Value) And (Fields!Value_Entry__Document_No__.Value<>"") And (Fields!Value_Entry__Invoiced_Quantity_.Value <>0),False,True)</Hidden>
// End of the added line.
</Visibility>
</TableRow>
</TableRows>
...
Vereisten
U moet het Verenigd Koninkrijk lokalisatie van Microsoft Dynamics NAV 2009 R2 of SP1 is geïnstalleerd om deze hotfix.
Informatie over verwijderen
U kunt deze hotfix niet verwijderen.
Status
Microsoft heeft bevestigd dat dit probleem kan optreden in de Microsoft-producten die worden vermeld in de sectie 'Van toepassing op'.
Opmerking Dit is een 'Snel publiceren' artikel dat rechtstreeks door het ondersteuningsteam van Microsoft is gemaakt. De informatie wordt geleverd zoals het is in reactie op de opkomende problemen. Omdat het artikel snel beschikbaar moest zijn, kunnen de materialen typografische fouten bevatten en op elk gewenst moment zonder voorafgaande kennisgeving worden gewijzigd. Zie de Gebruiksvoorwaardenvoor andere overwegingen.
