Algumas entradas de contabilidade são lançadas incorretas quando você lança um diário de recebimento de dinheiro com uma fatura e uma lista de rejeição ao mesmo tempo em que a versão em português do Microsoft Dynamics NAV 2009

Informações sobre o hotfix

Um hotfix suportado está disponível agora na Microsoft. No entanto, apenas destina-se a corrigir o problema descrito neste artigo. Aplique-o somente aos sistemas que apresentarem esse problema específico. Esta correção poderá ser submetida a testes adicionais. Portanto, se esse problema não o prejudicar, recomendamos que você aguarde o próximo service pack do Microsoft Dynamics NAV 2009 ou a próxima versão do Microsoft Dynamics NAV que contém esse hotfix.

Observação: Em alguns casos, as taxas cobradas para suporte a chamadas podem ser canceladas se um profissional de suporte técnico do Microsoft Dynamics e produtos relacionados determina que uma atualização específica resolverá o problema. Os custos normais de suporte serão aplicados para questões de suporte adicionais e problemas que não se qualificam à atualização específica em questão.

Alterações de código

Observação: Sempre teste código correções em um ambiente controlado antes de aplicar as correções para os computadores de produção.
Para resolver esse problema, altere o código no geral Jnl.-lançar linha codeunit (12). Para fazer isso, execute as seguintes etapas:

1. Adicione a seguinte variável global:

   TempRejCustLedgEntry@1100047 : TEMPORARY Record 21;

2. Altere o código na função PostCust da seguinte forma:
   1 de código existente

   ...          DiscRiskFactAmountLCY := 0;
             DiscUnriskFactAmountLCY := 0;
             CollFactAmountLCY := 0;
           //--------
   
             IF Cust."No." <> "Account No." THEN
               Cust.GET("Account No.");
             Cust.CheckBlockedCustOnJnls(Cust,"Document Type",TRUE);
   
             IF "Posting Group" = '' THEN BEGIN
   ...
   
   

   1 código de substituição

   ...          DiscRiskFactAmountLCY := 0;
             DiscUnriskFactAmountLCY := 0;
             CollFactAmountLCY := 0;
           //--------
   
   // Add the following lines. 
            TempRejCustLedgEntry.RESET;
            TempRejCustLedgEntry.DELETEALL;
   // End of the lines.
   
             IF Cust."No." <> "Account No." THEN
               Cust.GET("Account No.");
             Cust.CheckBlockedCustOnJnls(Cust,"Document Type",TRUE);
   
             IF "Posting Group" = '' THEN BEGIN
   ...
   
   

   2 de código existente

   ...            END;
   
             // Post the application
             ApplyCustLedgEntry(
               CVLedgEntryBuf,DtldCVLedgEntryBuf,GenJnlLine,GLSetup."Appln. Rounding Precision");
   
   // Delete the following lines.
            IF GenJnlLine."Applies-to Doc. Type" = GenJnlLine."Applies-to Doc. Type"::" " THEN
              GenJnlLine."Applies-to Doc. Type" := AppliesToDocType;
   // End of the lines.
   
             IF AppManagement.AccessToCartera AND NOT GenJnlLine.Prepayment THEN BEGIN
               IF "Document Type" = "Document Type"::Bill THEN BEGIN
                 DocPost.CreateReceivableDoc(GenJnlLine,CVLedgEntryBuf);
                 CustLedgEntry."Document Situation" := CustLedgEntry."Document Situation"::Cartera;
   ...
   
   

   Código de substituição 2

   ...            END;
   
             // Post the application
             ApplyCustLedgEntry(
               CVLedgEntryBuf,DtldCVLedgEntryBuf,GenJnlLine,GLSetup."Appln. Rounding Precision");
   
   // Add the following lines.
            IF ("Applies-to ID" = '') AND ("Applies-to Doc. Type" = "Applies-to Doc. Type"::" ") THEN
              "Applies-to Doc. Type" := AppliesToDocType;
   // End of the lines.
   
             IF AppManagement.AccessToCartera AND NOT GenJnlLine.Prepayment THEN BEGIN
               IF "Document Type" = "Document Type"::Bill THEN BEGIN
                 DocPost.CreateReceivableDoc(GenJnlLine,CVLedgEntryBuf);
                 CustLedgEntry."Document Situation" := CustLedgEntry."Document Situation"::Cartera;
   ...
   
   

3. Altere o código na função PostVend da seguinte forma:
   Código existente

   ...          // Post the application
             ApplyVendLedgEntry(
               CVLedgEntryBuf,DtldCVLedgEntryBuf,GenJnlLine,
               GLSetup."Appln. Rounding Precision");
   
   // Delete the following lines.
            IF GenJnlLine."Applies-to Doc. Type" = GenJnlLine."Applies-to Doc. Type"::" " THEN
              GenJnlLine."Applies-to Doc. Type" := AppliesToDocType;
   // End of the lines.
   
             IF AppManagement.AccessToCartera AND NOT GenJnlLine.Prepayment THEN BEGIN
               IF "Document Type" = "Document Type"::Bill THEN BEGIN
                 DocPost.CreatePayableDoc(GenJnlLine,CVLedgEntryBuf);
                 VendLedgEntry."Document Situation" := VendLedgEntry."Document Situation"::Cartera;
   ...
   
   

   Código de substituição

   ...          // Post the application
             ApplyVendLedgEntry(
               CVLedgEntryBuf,DtldCVLedgEntryBuf,GenJnlLine,
               GLSetup."Appln. Rounding Precision");
   
   // Add the following lines.
            IF ("Applies-to ID" = '') AND ("Applies-to Doc. Type" = "Applies-to Doc. Type"::" ") THEN
              "Applies-to Doc. Type" := AppliesToDocType;
   // End of the lines.
   
             IF AppManagement.AccessToCartera AND NOT GenJnlLine.Prepayment THEN BEGIN
               IF "Document Type" = "Document Type"::Bill THEN BEGIN
                 DocPost.CreatePayableDoc(GenJnlLine,CVLedgEntryBuf);
                 VendLedgEntry."Document Situation" := VendLedgEntry."Document Situation"::Cartera;
   ...
   
   

4. Altere o código na função ApplyCustLedgEntry da seguinte forma:
   Código existente

   ...                OldCustLedgEntry."Document Situation"::"Closed Documents",
                   OldCustLedgEntry."Document Situation"::"Closed BG/PO"]) THEN
                   FromClosedDoc := TRUE
                 ELSE
                   FromClosedDoc := FALSE;
                 DocPost.UpdateReceivableDoc(
                   OldCustLedgEntry,GenJnlLine,AppliedAmountLCY + DeltaUnrealAmount + DeltaAmountLCY,
                   DocAmountLCY,RejDocAmountLCY,DiscDocAmountLCY,CollDocAmountLCY,
                   DiscRiskFactAmountLCY,DiscUnriskFactAmountLCY,CollFactAmountLCY);
               END;
   ...
   
   

   Código de substituição

   ...                OldCustLedgEntry."Document Situation"::"Closed Documents",
                   OldCustLedgEntry."Document Situation"::"Closed BG/PO"]) THEN
                   FromClosedDoc := TRUE
                 ELSE
                   FromClosedDoc := FALSE;
   
   // Add the following lines.
                IF OldCustLedgEntry."Document Status" = OldCustLedgEntry."Document Status"::Rejected THEN BEGIN
                  TempRejCustLedgEntry := OldCustLedgEntry;
                  TempRejCustLedgEntry."Remaining Amount (LCY) stats." := AppliedAmountLCY + DeltaUnrealAmount + DeltaAmountLCY;
                  TempRejCustLedgEntry.INSERT;
                END;
   // End of the lines.
   
                 DocPost.UpdateReceivableDoc(
                   OldCustLedgEntry,GenJnlLine,AppliedAmountLCY + DeltaUnrealAmount + DeltaAmountLCY,
                   DocAmountLCY,RejDocAmountLCY,DiscDocAmountLCY,CollDocAmountLCY,
                   DiscRiskFactAmountLCY,DiscUnriskFactAmountLCY,CollFactAmountLCY);
               END;
   ...
   
   

5. Altere o código na função PostDtldCustLedgEntries da seguinte forma:
   Código existente

   ...              AccNo := CustPostingGr."Bills Account";
               END ELSE BEGIN
                 CustPostingGr.TESTFIELD("Receivables Account");
                 AccNo := CustPostingGr."Receivables Account";
               END;
   
   // Delete the following lines.
              IF DiscDocAmountLCY <> 0 THEN BEGIN
                CustPostingGr.TESTFIELD("Discted. Bills Acc.");
                AccNo := CustPostingGr."Discted. Bills Acc.";
              END;
              IF CollDocAmountLCY <> 0 THEN BEGIN
                CustPostingGr.TESTFIELD("Bills on Collection Acc.");
                AccNo := CustPostingGr."Bills on Collection Acc.";
              END;
              IF RejDocAmountLCY <> 0 THEN BEGIN
                CASE GenJnlLine."Applies-to Doc. Type" OF
                  GenJnlLine."Applies-to Doc. Type"::Bill:
                    BEGIN
                      CustPostingGr.TESTFIELD("Rejected Bills Acc.");
                      AccNo := CustPostingGr."Rejected Bills Acc.";
                    END;
                  GenJnlLine."Applies-to Doc. Type"::Invoice:
                    BEGIN
                      CustPostingGr.TESTFIELD("Rejected Factoring Acc.");
                      AccNo := CustPostingGr."Rejected Factoring Acc.";
                    END;
                  ELSE
                    IF (GenJnlLine."Document Type" IN [GenJnlLine."Document Type"::"Credit Memo",GenJnlLine."Document Type"::Payment]) AND
                      (OldCVLedgEntryBuf4."Applies-to ID" <> '') THEN BEGIN
                      CASE OldCVLedgEntryBuf4."Document Type" OF
                        OldCVLedgEntryBuf4."Document Type"::Bill:
                          BEGIN
                            CustPostingGr.TESTFIELD("Receivables Account");
                            AccNo := CustPostingGr."Receivables Account";
                          END;
                        OldCVLedgEntryBuf4."Document Type"::Invoice:
                          BEGIN
                            CustPostingGr.TESTFIELD("Receivables Account");
                            AccNo := CustPostingGr."Receivables Account";
                          END;
                      END;
                    END;
                END;
              END;
              IF (DiscRiskFactAmountLCY <> 0) OR (DiscUnriskFactAmountLCY <> 0) THEN BEGIN
                CustPostingGr.TESTFIELD("Factoring for Discount Acc.");
                AccNo := CustPostingGr."Factoring for Discount Acc.";
              END;
              IF CollFactAmountLCY <> 0 THEN BEGIN
                CustPostingGr.TESTFIELD("Factoring for Collection Acc.");
                AccNo := CustPostingGr."Factoring for Collection Acc.";
              END;
   // End of the lines.
   
               ReceivableAccAmtLCY :=
                 TotalAmountLCY -
                 (DocAmountLCY + DiscDocAmountLCY +
                  CollDocAmountLCY + RejDocAmountLCY + DiscRiskFactAmountLCY +
   ...
   
   

   Código de substituição

   ...              AccNo := CustPostingGr."Bills Account";
               END ELSE BEGIN
                 CustPostingGr.TESTFIELD("Receivables Account");
                 AccNo := CustPostingGr."Receivables Account";
               END;
   
               ReceivableAccAmtLCY :=
                 TotalAmountLCY -
                 (DocAmountLCY + DiscDocAmountLCY +
                  CollDocAmountLCY + RejDocAmountLCY + DiscRiskFactAmountLCY +
   ...
   
   

6. Altere o código na função PostReceivableDocs da seguinte forma:
   Código existente

   ...          GLEntry."Bal. Account Type" := GenJnlLine."Bal. Account Type";
             GLEntry."Bal. Account No." := GenJnlLine."Bal. Account No.";
             InsertGLEntry(TRUE);
           END;
           IF RejDocAmountLCY <> 0 THEN BEGIN
   
   // Delete the following lines.
            CASE GenJnlLine."Applies-to Doc. Type" OF
              GenJnlLine."Applies-to Doc. Type"::Bill:
                BEGIN
                  CustPostingGr.TESTFIELD("Rejected Bills Acc.");
                  InitGLEntry(CustPostingGr."Rejected Bills Acc.",RejDocAmountLCY,DocAmtCalcAddCurrency(RejDocAmountLCY),TRUE,TRUE);
                  GLEntry."Bal. Account Type" := GenJnlLine."Bal. Account Type";
                  GLEntry."Bal. Account No." := GenJnlLine."Bal. Account No.";
                  InsertGLEntry(TRUE);
                END;
              GenJnlLine."Applies-to Doc. Type"::Invoice:
                BEGIN
                  CustPostingGr.TESTFIELD("Rejected Factoring Acc.");
                  InitGLEntry(CustPostingGr."Rejected Factoring Acc.",RejDocAmountLCY,DocAmtCalcAddCurrency(RejDocAmountLCY),TRUE,TRUE);
                  GLEntry."Bal. Account Type" := GenJnlLine."Bal. Account Type";
                  GLEntry."Bal. Account No." := GenJnlLine."Bal. Account No.";
                  InsertGLEntry(TRUE);
                END;
              ELSE
                IF (GenJnlLine."Document Type" IN [GenJnlLine."Document Type"::"Credit Memo",GenJnlLine."Document Type"::Payment]) AND
                  (OldCVLedgEntryBuf4."Applies-to ID" <> '') THEN BEGIN
                  CASE OldCVLedgEntryBuf4."Document Type" OF
                    OldCVLedgEntryBuf4."Document Type"::Bill:
                      BEGIN
                        CustPostingGr.TESTFIELD("Rejected Bills Acc.");
                        InitGLEntry(CustPostingGr."Rejected Bills Acc.",RejDocAmountLCY,DocAmtCalcAddCurrency(RejDocAmountLCY),TRUE,TRUE);
                        GLEntry."Bal. Account Type" := GenJnlLine."Bal. Account Type";
                        GLEntry."Bal. Account No." := GenJnlLine."Bal. Account No.";
                        InsertGLEntry(TRUE);
                      END;
                    OldCVLedgEntryBuf4."Document Type"::Invoice:
                      BEGIN
                        CustPostingGr.TESTFIELD("Rejected Factoring Acc.");
                        InitGLEntry(CustPostingGr."Rejected Factoring Acc.",RejDocAmountLCY,DocAmtCalcAddCurrency(RejDocAmountLCY),TRUE,TRUE
          );
   
                        GLEntry."Bal. Account Type" := GenJnlLine."Bal. Account Type";
                        GLEntry."Bal. Account No." := GenJnlLine."Bal. Account No.";
                        InsertGLEntry(TRUE);
                      END;
                  END;
                END;
   // End of the lines.
   
             END;
           END;
           IF DiscRiskFactAmountLCY <> 0 THEN BEGIN
             CustPostingGr.TESTFIELD("Factoring for Discount Acc.");
             InitGLEntry(CustPostingGr."Factoring for Discount Acc.",
   ...
   
   

   Código de substituição

   ...          GLEntry."Bal. Account Type" := GenJnlLine."Bal. Account Type";
             GLEntry."Bal. Account No." := GenJnlLine."Bal. Account No.";
             InsertGLEntry(TRUE);
           END;
           IF RejDocAmountLCY <> 0 THEN BEGIN
   
   // Add the following lines.
            WITH TempRejCustLedgEntry DO BEGIN
              RESET;
              SETCURRENTKEY("Customer No.","Document Type","Document Situation","Document Status");
              SETRANGE("Document Type","Document Type"::Bill);
              CALCSUMS("Remaining Amount (LCY) stats.");
              IF "Remaining Amount (LCY) stats." <> 0 THEN BEGIN
                CustPostingGr.TESTFIELD("Rejected Bills Acc.");
                InitGLEntry(
                  CustPostingGr."Rejected Bills Acc.","Remaining Amount (LCY) stats.",
                  DocAmtCalcAddCurrency("Remaining Amount (LCY) stats."),TRUE,TRUE);
                GLEntry."Bal. Account Type" := GenJnlLine."Bal. Account Type";
                GLEntry."Bal. Account No." := GenJnlLine."Bal. Account No.";
                InsertGLEntry(TRUE);
              END;
              SETRANGE("Document Type","Document Type"::Invoice);
              CALCSUMS("Remaining Amount (LCY) stats.");
              IF "Remaining Amount (LCY) stats." <> 0 THEN BEGIN
                CustPostingGr.TESTFIELD("Rejected Factoring Acc.");
                InitGLEntry(
                  CustPostingGr."Rejected Factoring Acc.","Remaining Amount (LCY) stats.",
                  DocAmtCalcAddCurrency("Remaining Amount (LCY) stats."),TRUE,TRUE);
                GLEntry."Bal. Account Type" := GenJnlLine."Bal. Account Type";
                GLEntry."Bal. Account No." := GenJnlLine."Bal. Account No.";
                InsertGLEntry(TRUE);
              END;
   // End of the lines.
   
             END;
           END;
           IF DiscRiskFactAmountLCY <> 0 THEN BEGIN
             CustPostingGr.TESTFIELD("Factoring for Discount Acc.");
             InitGLEntry(CustPostingGr."Factoring for Discount Acc.",
   ...