Microsoft Dynamics 365 (online i lokalne) Update 2.1

Instalacija Windows UpdateKoristite Windows Update da automatski instalira Microsoft Dynamics 365 (online i lokalne) Update 2.1. Ovo mora da bude instaliran na serveru sa sistemom Microsoft Dynamics CRM 2016 (verzija 8.0) ili noviji. Ova ispravka će biti dostupna kroz Windows Update u Q2 od 2017. Za više informacija, pogledajte: nadogradite Microsoft Dynamics CRM servera 2016 Windows možete konfigurirati tako da automatski Instaliraj preporučene ispravke. Ova postavka odnosi reše probleme i pomažu da se poboljša vaš utisak pri radu. Opcionalne ispravke nisu preuzete ili instaliraju automatski kada koristite ovu postavku. Da biste saznali više o postavkama za instaliranje ispravki za Windows, idite na sledeće Microsoft Web lokacije:

Uključivanje ili isključivanje automatskog ažuriranja Promena načina na koji Windows instalira ispravke ili obaveštava o njimaDa biste instalirali Microsoft Dynamics 365 (online i lokalne) Update 2.1 pomoću usluge Windows Update, slijedite ove korake:

1. Kliknite na dugme Start, a zatim upišite Ažuriranje u polju Započni pretragu .

2. Sa liste rezultata izaberite stavku Windows Update.

3. U oknu za navigaciju izaberite da li postoje ispravke, a zatim sačekajte dok Windows provjerava ima li najnovije ispravke za vaš računar.

4. Ako primite poruku koja navodi da važne su dostupne ispravke ili to od vas traži da pregledate važna ažuriranja, da izaberete ček kutije za ispravke to ti želite da instalirate, a zatim kliknite na dugme u redu. Napomena Kliknite na bilo koji ažuriranje za više informacija.

5. Kliknite na dugme Instaliraj ažuriranja.

6. Proиitao i prihvatite uslove licenciranja i zatim kliknite na dugme Završi (ako je ispravka zahteva ovu radnju). Ako se od vas zatraži da unesete administratorsku lozinku, upišite lozinku. Potvrdi da prihvatate uslove ako se od vas zatraži da biste to učinili.

Ručna instalacijaDa biste ručno instalirali Microsoft Dynamics 365 (online i lokalne) ažurirati 2.1, slijedite ove korake.

1. Idi na sledeću Web lokaciju Microsoft Update Catalog:

   Microsoft Update Catalog

2. U polju za pretragu otkucajte 4013759, a zatim kliknite na dugme za pretragu.

3. Kliknite na dugme Dodaj da biste dodali ispravku u korpu.

4. Kliknite da biste preuzeli.

5. Kliknite na dugme Potraži, Navedite fasciklu u koju želite da preuzmete ažuriranje i zatim kliknite na dugme u redu.

6. Kliknite na dugme Nastavi, a zatim kliknite na dugme prihvatam da prihvate uslove licenciranja za Microsoft softver.

7. Kada su ažuriranja preuzeta na lokaciji koju ste naveli, kliknite na Zatvori.

Za više informacija o Microsoft Update Catalog, kliknite na sledeći broj članka da idem članak u Microsoft bazi znanja:

323166 kako preuzeti ažuriranja koja sadrže upravljačke programe i hitne popravke iz kataloga za Windows Update

Informacije o instaliranju dodatnih

• Nakon što instalirate ovu ispravku, izađite iz neke postojeće sesije za Microsoft Dynamics CRM, a zatim pokrenite novu sesiju Microsoft Dynamics CRM.

• Kad ti deprovision jezički paket, postavke jezika svih korisnika Microsoft Dynamics CRM koji koriste taj jezik će se vratiti postavke podrazumevanog jezika. Reprovisioning proces ne ažurira jezičke postavke korisnika. Zbog toga, korisnici moraju da poništi njihove jezičke postavke u odeljku lične opcije kada se prijave u Microsoft Dynamics 365.

Zahtev za ponovnim pokretanjemAko se od vas zatraži da ponovo pokrenete računar, uradite nakon primene ispravku.

Informacije o uklanjanjuMicrosoft Dynamics 365 (lokalne) Update 2.1 može biti uklonjena iz Microsoft Dynamics 365 server da biste se vratili na program prethodnog version.2

Microsoft Dynamics 365 (online i lokalne) Update 2.1 rešava sledeće probleme:

 

• Dijalog „Planiranje obaveštenja” se prikazuju bez bilo upozorenja u Internet Explorer pregledača.

• Zatvorene aktivnosti ikone neće biti prikazane ispravno za neke entitete i aktivnosti.

• AdminOnlyMode potvrdu treba da bude zaobiљao kada neku aplikaciju iz izvan želi da izvrši neki SDK u kontekstu korisnika sistema.

• Zakazana obaveza primaoci ne primaju pozive.

• Zakazane obaveze kreirane u programu Outlook ili Outlook Web aplikaciju je potrebno da bude aktivirano.

• Detalji o reviziji izgubio nakon prebacivanja slučaj Status tranzicije.

• Nije moguće dodati povezanog zapisa za n: n relacije sa samo dodavanje/Dodavanje da dozvole.

• Kategorizovane pretraga nije uspela sa greška u izradi upita treba da koristite funkcije lookup prikaz atributa entiteta u brzog pronalaženja.

• Kada je protok za poslovni proces u entitetu slučaj je duplirana pristup podacima Incident je slomljena.

• Promena vlasnika preko toka posla takođe mijenja vlasnika u kreiranje događaj nadgledanja.

• Klika na telefonski broj veza otvara brzog kreiranja obrasca.

• Komandna traka u kartici aktivnosti u okno društvenih aktivnosti ne prikazuje svu dugmad.

• Navigacija iz kontakta prilike i nazad opet visi sa porukom „Zahtevanje podataka iz CRM”.

• Kreiranje zakazane iz okna socijalne kada < simbol je prisutan (mogućnosti).

• Prilagođeni tok posla aktivnosti će biti aktiviran dvaput koji je dizajniran da ga zovu samo jednom.

• Deaktivirajte ekranu pomoću prilagođenih neaktivan status razloga zahteva za pomeranje da biste odabrali opciju.

• Uređivanje kolona tokom više opcija traženja baca grešku (window.opener.top.location.href).

• Telo e-pošte je onemogućeno dok koristite hroma u Citrix, a Krom inkognito režim u operativnom sistemu Windows.

• Izvezi rešenje nije uspeo u RoutingRuleHandler.ExportWorkflow sa Null System.NullReferenceException: prigovor referenca nije postavljena na instancu objekta.

• Izvoz u dinamički radni list ne poštuje regionalne postavke.

• Obrasci više ne podvučeno odjeljaka od kada nadogradite Dynamics 365.

• Sve SQL vremensko ograničenje izuzetak prilikom preuzimanja aplikacija metapodataka.

• Otvori u pregledaču generiše nevažeći URL u iOS 10.

• Zadnji ažurirani polje nije vidljivo ispod za zdravlje.

• Nije je nemogućnost pronalaženja.

• Nedostaje „+” ikonu na brzi prikaz kontrole.

• Nije moguće postaviti u vezi sa na e-poruke kada koristite servis recepciju unificirani.

• Greška „Objekt ne podržava svojstvo ili metodu „$find”” se javlja kada kada dvaput kliknete na rezultate dugme.

• Organizacije nadogradio Microsoft Dynamics CRM 2016 mogu da imaju je Null BusinessProcessType uzrokuje ove teče za poslovni proces biti neupotrebljiv poštanski nadogradnju.

• Za pronalaženje kontrola greške prilikom ažuriranja zakazane obaveze kreirane u programu Outlook.

• Stranica stalno učitavanje nakon kada kliknete u redu na grešku zabrane pristupa.

• Prethodnu vezu sa poštanskim sandučetom nije zatvorena pravilno koristeći hibridni E-mail Server profila.

• Greška „nije moguće uspostaviti vezu sa Exchange serverom” se javlja kada pokušate da koristite aplikaciju CRM za Outlook u programu Outlook Web App (OWA).

• Planiranje upozorenje se javlja bez upozorenja kada menjate postojeći zakazano.

• Strani sinhronizacije sa serverom zahteva učesnika lista promene kada postoji je više kontakata s istom e-adresom, ili korisnike postoji sa istom e-adresom kao kontakti.

• Deinstaliraj rešenje je ne poštujući zavisnost.

• StatusCode vrednost se prikazuje kao broj umesto teksta za neaktivne zapise na na QuickViewForm.

• Podmreži za mogućnost za poslovanje ne izaziva prilika podrazumevani tok poslovnih procesa.

• Zapis podmreži mijenja raspored obrasca.

• Tok posla za sinhronizaciju sa korisnika sistema kao primarni entitet baca grešku kada se aktivira.

• SystemUserPrincipals ne mogu da nastanim kada korisnik je aktivan.

• Zadaci dupliranja kroz Server strani sinhronizacije nakon bezbednosnu ulogu promeniti.

• Nije moguće dodati napomene na zadatak nakon udaljavanja obrasca zadatka u prodaji za Dynamics 365.

• Nije moguće dodeliti bezbednosnu ulogu poslovnog procesa toka u Dynamics 365 za prodaju.

• Nije moguće uvesti Excel koja sadrži podatke za polje broj tačke pluta.

• Nije moguće popuniti vrednost na servis polje na aktivnost usluge iz pomoćnika za obrasce.

• Se ne može pročitati HTML kodiranje prikazuje se lista alternativa ključnih izabrani atributi.

• WebAPI Fetch XML jeziku upit neće vratiti FormattedValues za vezu-entiteti atribute u Dynamics 365.

• Kada se krije poslovni proces toka tokom onLoad samo prva 2 koraka prikazuju se kada se pokazuje poslovni proces toka.

• Niko nije znao

Microsoft Dynamics 365 (online i lokalne) Update 2.1 sadrži ispravke koje morate ručno konfigurisati.  Za više informacija o tome kako da instalirate ispravke za proizvod u Microsoft Dynamics CRM 2016 ili Microsoft Dynamics CRM Online, pogledajte sledeće Microsoft TechNet temu:

Instalirajte ispravke za proizvod Proizvode nezavisnih proizvođača o kojima se govori u ovom članku proizvela su preduzeća koja su nezavisna od korporacije Microsoft. Microsoft ne daje nikakvu garanciju, impliciranu ni neku drugu, u pogledu performansi ili pouzdanosti ovih proizvoda.

Nema informacija o datoteci u ovom trenutku.

Windows Update installationUse Windows Update to automatically install Microsoft Dynamics 365 (online and on-premises) Update 0.1. This must be installed on a server running Microsoft Dynamics CRM 2016 (version 8.0) or later. This update will be available through Windows Update in Q1 of 2017. For more information, see: Upgrade a Microsoft Dynamics CRM 2016 Server

You can configure Windows to automatically install recommended updates. This setting addresses noncritical problems and helps improve your computing experience. Optional updates are not downloaded or installed automatically when you use this setting.

To learn more about the settings to install Windows updates, go to the following Microsoft websites:

Turn automatic updating on or off

Change how Windows installs or notifies you about updates
To install Microsoft Dynamics 365 (online and on-premises) Update 0.1 by using Windows Update, follow these steps:

1. Click Start, and then type Update in the Start Search box.

2. In the list of results, click Windows Update.

3. In the navigation pane, click Check for updates, and then wait while Windows checks for the latest updates for your computer.

4. If you receive a message that states that important updates are available or that prompts you to review important updates, select the check boxes for any updates that you want to install, and then click OK.
   
   Note Click any update for more information.

5. Click Install updates.

6. Read and accept the license terms, and then click Finish (if the update requires this action). If you are prompted to enter an administrator password, type the password. Confirm that you accept the terms if you are prompted to do this.

Manual installationTo manually install Microsoft Dynamics 365 (online and on-premises) Update 0.1, follow these steps.

1. Go to the following Microsoft Update Catalog website:

   Microsoft Update Catalog

2. In the Search box, type 4013759, and then click Search.

3. Click Add to add the update to the basket.

4. Click Download.

5. Click Browse, specify the folder to which you want to download the update, and then click OK.

6. Click Continue, and then click I Accept to accept the Microsoft Software License Terms.

7. When the update is downloaded to the location that you specified, click Close.

For more information about the Microsoft Update Catalog, click the following article number to go to the article in the Microsoft Knowledge Base:

323166 How to download updates that include drivers and hotfixes from the Windows Update Catalog

Additional installation information

• After you install this update, exit any existing Microsoft Dynamics CRM sessions, and then start a new Microsoft Dynamics CRM session.

• When you deprovision a language pack, the language settings of all Microsoft Dynamics CRM users who are using that language will revert to the default language settings. The reprovisioning process does not update the language settings of users. Therefore, users must reset their language settings in the personal options section when they log on to Microsoft Dynamics 365.

Restart requirementIf you are prompted to restart the computer, do this after you apply the update.

Removal informationMicrosoft Dynamics 365 (online and on-premises) Update 0.1 can be uninstalled from the Microsoft Dynamics 365 server to roll back the program to the previous version.

Microsoft Dynamics 365 (online and on-premises) Update 0.1 resolves the following issues:

• "Scheduling Alerts" dialog is displayed without any alerts in non-IE browsers 311235

• Activities and Closed Activities Icons not displayed correctly for some entities 353225

• AdminOnlyMode check should be bypassed when an application from outside wants to execute a sdk in system user context 369154

• Appointment recipients do not receive invitations 364435

• Appointments created in Outlook/Web App need to be activated 369134

• Audit details lost after switching Case status transition 368590

• Cannot add associated record for N:N Relationships with only Append/Append To permissions 370812

• Categorized Search fails with QueryBuilder Error due to use of lookup entity Attributes in Quick Find view 366528

• Centaurus - When BPF in case entity is duplicated access to incident records is broken. 366499

• Changing owner via workflow also changes Owner in Create Audit Event 367881

• Clicking Phone Number link opens Quick Create form. 369188

• Command Bar in activities tab in social pane not displaying all buttons 353220

• contact to opportunity and back again hangs Requesting data from CRM 368929

• Creating an appointment from Social pane when { symbol is present (Opportunities) 366922

• Customized Workflow activity will be triggered twice which is designed to be called only once. 367350

• Deactivate screen with custom Inactive status reasons requires scolling to choose option 369191

• Editing columns during Advanced Find throws error (window.opener.top.location.href) 369708

• Email body disabled in Chrome in Ctrix and Chrome Icognito mode in Windows 368410

• Export solution failed in RoutingRuleHandler.ExportWorkflow with null System.NullReferenceException: Object reference not set to an instance of an object. 368027

• Export to dynamic worksheet doesn’t respect regional settings 368222

• Forms no longer underline section headings since D365 upgrade 367177

• Getting SQL timeout exception when retrieving application metadata 370070

• iOS 10 - Open in browser generates invalid URL. 368331

• Last updated field is not shown up under Healthbox 369903

• Lookup not defaulting 350088

• Missing " +" Icon on the quick view control 368827

• Not possible to set regarding on emails view in USD 369118

• Object doesn't support property or method '$find' when clicking on Results button twice 351200

• Orgs upgraded from Ara can have null BusinessProcessType causing these BPFs to be unusable post upgrade 368895

• Outlook - lookup control error when updating appointment created in Outlook 369119

• Page Keeps loading after clicking ok on access denied error 368932

• Previous connection to mailbox is not closed properly using Hybrid 367807

• RM OWA app is "unable to connect to Exchange" in accompli 369236

• Scheduling Alert pops without alert when changing an existing appointment 369190

• Server Side Sync required attendees list changes when multiple contacts exist with same email address or users exist with same email address as contacts 344821

• Solution uninstall is not respecting dependency 369093

• StatusCode value is displayed as Integer instead of Text for Inactive records on QuickViewForm 367149

• subgrid for opportunity doesn't trigger the opportunity default business process flow 363824

• Subgrid record changes layout of the form 368445

• Sync workflow with System User as primary entity throws error when triggered 369291

• SystemUserPrincipals could not repopulate when user is reactivated 366475

• Tasks duplicating through Server Side Synchronization after security role change 354129

• Unable to Add Notes To Task After Navigating Away from Task form in Dynamics 365 For Sales 368872

• Unable to Assign Security Role to Business Process Flow in Dynamics 365 for Sales 366937

• Unable to import Excel containing Floating Point Number field data 365379

• Unable to populate value on Service field on Service Activity from the Form assistant 368654

• Unreadable HTML encode displays in alternate key Selected Attributes list 369332

• WebAPI FetchXml Query Does Not Return FormattedValues for Link-Entities' Attributes in Dynamics 365 368967

• When hiding the Business Process Flow during onLoad only the first 2 steps are displayed when showing the BPF 368412

• Pre-CDU Gauntlet upgrade failing for org with "Data is Null. This method or property cannot be called on Null values." during CreateOrUpdateBPFEntityLayers 368461

• Naos core to centaurus core upgrade fails in prescence of project service solution with demo data 368023

• [Fwd Port Bug] [BackPort] : Delete Audit Partition Performance 369586

• Don't pinprocess when qualifying lead from grid 369321

• Receiving a lot of Exchange Timeout errors on telemetry 370056

• Telemetry: We don't get enough information from shim events 370057

• [From 8.2 to 8.2_UR1] : Fix uri path for AuthenticateAndFetchACIData. 369902

• [Back Port Bug] FwdPort TFS316176 - Child BU users don't appear under CRM App for Outlook eligible user list 369127

• [Forward Port TFS Bug 323246] SQL Index related to key in 2015 is deleted during CRM 2016 upgrade 369197

• Remove 'Experience it now' banner for ISH from web client 366300

• OWA: Telemetry - Customer Impact - Activity Id and data times are not displayed in Error pages - UR1 364036

• CDUs failing with "Unable to find metadata information for attribute" while updating rollup field stored procedures during upgrade 367026

• Remove organizationId from plugintracelog 306785

• [Live Incident] AdxstudioIssues" solution import failure due to System.NullReferenceException in RunImport(String[] ImportEntities) 367294

• Pre-CDU Gauntlet upgrade failing for org with "ProductPriceLevel either has no primary field or has a logical primary field and therefore cannot be the referenced entity in an entity relationship" during CreateOrUpdateBPFEntityLayers 367372

• Pre-CDU Gauntlet org failed with "An error occurred. Contact a system administrator or refer to the Microsoft Dynamics CRM SDK troubleshooting guide." in AddMissingKnowledgeArticlePostConfigRowsForActivityFeeds 367682

• CDNUploader changes not zipping the static content and copying to patch location 367736

• [Fwd Port Bug] FWPort to Naos 299582 | Subgrids getting loaded even if tab is collapsed 363617

• [Fwd Port Bug] Forward Port 282946 to Centaurus {KBC} 353222

• [Fwd Port Bug] Forward Port CRM SE 44610 to Centaurus {KBC} 353218

• Unable to delete/uninstall project service solution upgraded from naos to centaurus due to errors from dependency checks 366562

• CDU fails for org with "'Opportunity' entity doesn't contain attribute with Name = 'msdyn_workordertype'" 366604

• CDUs failing with "Web resource content too big" - the fix for 343275 is insufficient 366631

• Pre-CDU Gauntlet failed with privilege exception on prvReadCustomControlDefaultConfig 366638

• Pre-CDU Gauntlet upgrade failing for orgs with AttributeMetadataNotFoundException in WorkflowDependencyCalculator 366649

• Pre-CDU Gauntlet org failing upgrade with exception "Mobile Offline Profiles import: FAILURE ---} Microsoft.Crm.CrmException: This entity needs to be enabled for mobile offline" 366650

• Pre-CDU Gauntlet org failing upgrade with exception "webresource With Id = bb6882d0-f126-e511-80d5-00155dce4003 Does Not Exist" 366651

• UPDATE ROLLUP - Accompli: Latest build requires changes to get callback token with REST context 366661

• CDU: Data Migration Script Should Handle Entity Type Code as 0 370183

• Telemetry: MailApp Shim events don't correlate to Moca events sent using old telemetry infra 370424

• Generic error message is getting sent to Telemetry in many cases, making hard to dissect errors - UR1 370544

• OWA: Telemetry - All MailAppError Events Cannot Be Correlated With MailAppInitDiagnostics - UR1 370704

• NextStage navigation breaking on multiple orgs 370816

• Initial Metadata request doesn't validate for errors in the response's object - UR1 371089

• Include Mailbox Id information on Telemetry events 371090

• Centaurus: Orgs upgraded from Ara (with layered solutions) can have null BusinessProcessType causing these BPFs to be unusable post upgrade if the active solution is removed 371104

• [Back Port Bug] Import of custom entity fails because of duplicate CustomControlDefaultConfig 371590

• [BACKPORT 8.2_ur2-}8.2_ur1] [Bug 371489: 'Experience it now' banner for Org Insights in Web client is not functional - Nothing happens when we click on it] 371650

• [Backport to UR1] [LI] Install failed due to multiple States missing in ComponentStateTransitionFactory 371820

• [Back Port Bug] Generic React error in retail builds 371939

Microsoft Dynamics 365 (online and on-premises) Update 0.1 contains updates that you must configure manually. These include the Portal, Field Service, and Project Service products. These require the customer to install the solution from the Office 365 portal. To receive the product updates, you must opt in.

For more information about how to install product updates in Microsoft Dynamics CRM 2016 or Microsoft Dynamics CRM Online, see the following Microsoft TechNet topic:

Install product updatesThe third-party products that this article discusses are manufactured by companies that are independent of Microsoft. Microsoft makes no warranty, implied or otherwise, about the performance or reliability of these products.

There is no File Information at this time.