Tento článok sa vzťahuje na Microsoft Dynamics NAV na maďarský (hu) jazyk locale.
Príznaky
Predpokladajme, že nainštalovaní rýchlej opravy 2664466 maďarský verzia systému Microsoft Dynamics NAV 2009 R2. Pri vypočítavaní Štatistika faktúry zaúčtované faktúry, daň z pridanej hodnoty (DPH) suma sa zaokrúhli nesprávne.
Ďalšie informácie o rýchlej oprave 2664466, po kliknutí na nasledovné číslo článku publikovaného v databáze Microsoft Knowledge Base:
2664466 DPH je nesprávna, pri faktúry v cudzej mene maďarský verzia systému Microsoft Dynamics NAV 5.0 Service Pack 1
Riešenie
Informácie o rýchlej oprave
Rýchla oprava je k dispozícii od spoločnosti Microsoft. Je však určená iba opraviť problém popísaný v tomto článku. Použite ju iba v počítačoch s týmto konkrétnym problémom. Môže, že táto rýchla oprava bude ďalej testovaná. Ak vám nespôsobuje tento problém, odporúčame vám počkať na ďalšiu Microsoft Dynamics NAV 2009 service pack alebo ďalšej verzii Microsoft Dynamics NAV, ktorá obsahuje túto rýchlu opravu.
Poznámka: V špeciálnych prípadoch sa poplatky, ktoré sú telefonickú podporu nemusia účtovať ak technickú podporu Professional pre Microsoft Dynamics a súvisiace produkty zistí, že táto konkrétna aktualizácia vyrieši váš problém. Ďalšie otázky a žiadosti o technickú podporu, ktoré sa netýkajú tejto špecifickej aktualizácie, podliehajú bežným sadzbám za poskytovanie technickej podpory.
Informácie o inštalácii
Spoločnosť Microsoft poskytuje príklady programovacieho kódu len ako názornú ukážku bez vyjadrených či predpokladaných záruk. Tie okrem iného zahŕňajú predpokladané záruky obchodovateľnosti alebo vhodnosti na konkrétny účel. Tento článok predpokladá, že ovládate predvádzaný programovací jazyk a nástroje, ktoré sa používajú na vytváranie a ladenie procedúr. Pracovníci technickej podpory spoločnosti Microsoft môžu vysvetliť fungovanie konkrétneho postupu. Ale nemôžu tieto príklady poskytovať pridanú funkčnosť alebo konštrukčné procedúry zohľadňujúce vaše konkrétne požiadavky.
Poznámka: Pred inštaláciou tejto rýchlej opravy, kontrola všetkých používateľov klienta Microsoft Dynamics NAV systém. To zahŕňa služby Microsoft Dynamics NAV aplikácie servera (NAS). Mali by ste byť iba klient prihláseného používateľa je pri implementácii túto rýchlu opravu.
Vykonávať túto rýchlu opravu, musíte mať licencie pre vývojárov.
Odporúčame, aby používateľského konta v okne prihlásenia systému Windows alebo v okne prihlásenia do databázy pridelí "SUPER" úlohu ID. Ak používateľské konto nemožno priradiť úlohu ID "SUPER", musíte overiť, že používateľské konto má nasledujúce povolenia:
-
Zmeniť povolenia pre objekt, ktorý sa zmení.
-
Povolenia na vykonanie systému objekt ID 5210 a systém objekt ID 9015
objekt.
Poznámka: Nemusíte mať práva ukladá údaje, pokiaľ budete musieť vykonať opravy údajov.
Zmeny kódu
Poznámka: Vždy skúšobný opravy v prostredí kontrolované pred použitím opravy výroby počítačov.
Ak chcete vyriešiť tento problém, postupujte nasledovne:
-
Zmena kódu do polí v tabuľke Riadok predaja (37) takto:
Nahradenie kód 1...
// Delete the following line.
CalcVATToReport(SalesHeader,"VAT Base Amount","Amount Including VAT" - "VAT Base Amount",
// End of the deleted line.
"VAT Base Amt. to Report (LCY)","VAT Amount to Report (LCY)");
...Nahradenie kód 1
...
// Add the following line.
CalcVATToReport(SalesHeader,"VAT Base Amount","Amount Including VAT",
// End of the added line.
"VAT Base Amt. to Report (LCY)","VAT Amount to Report (LCY)");
...Existujúci kód 2
...
// Delete the following line.
CalcVATToReport(SalesHeader,"VAT Base Amount","Amount Including VAT" - "VAT Base Amount",
// End of the deleted line.
"VAT Base Amt. to Report (LCY)","VAT Amount to Report (LCY)");
...Nahradenie kód 2
...
// Add the following line.
CalcVATToReport(SalesHeader,"VAT Base Amount","Amount Including VAT",
// End of the added line.
"VAT Base Amt. to Report (LCY)","VAT Amount to Report (LCY)");
... -
Zmena kódu v UpdateVATAmounts funkcia v tabuľke Riadok predaja (37) takto:
Existujúci kód...
// Delete the following line.
CalcVATToReport(SalesHeader,"VAT Base Amount","Amount Including VAT" - "VAT Base Amount",
// End of the deleted line.
"VAT Base Amt. to Report (LCY)","VAT Amount to Report (LCY)");
...Nahradenie kódu
...
// Add the following line.
CalcVATToReport(SalesHeader,"VAT Base Amount","Amount Including VAT",
// End of the added line.
"VAT Base Amt. to Report (LCY)","VAT Amount to Report (LCY)");
... -
Zmena kódu v UpdateVATOnLines funkcia v tabuľke Riadok predaja (37) takto:
Existujúci kód..."VAT Base Amount" := NewVATBaseAmount;
// Delete the following line.
CalcVATToReport(SalesHeader,"VAT Base Amount","Amount Including VAT" - "VAT Base Amount",
// End of the deleted line.
"VAT Base Amt. to Report (LCY)","VAT Amount to Report (LCY)");
...Nahradenie kódu
..."VAT Base Amount" := NewVATBaseAmount;
// Add the following line.
CalcVATToReport(SalesHeader,"VAT Base Amount","Amount Including VAT",
// End of the added line.
"VAT Base Amt. to Report (LCY)","VAT Amount to Report (LCY)");
... -
Zmena kódu v CalcVATAmountLines funkcia v tabuľke Riadok predaja (37) takto:
Existujúci kód...
// Delete the following line.CalcVATToReport(SalesHeader,"VAT Base","VAT Amount" - "VAT Difference",
// End of the deleted line.
"VAT Base Amt. to Report (LCY)","VAT Amount to Report (LCY)");
...Nahradenie kódu
...
// Add the following line.
CalcVATToReport(SalesHeader,"VAT Base","Amount Including VAT" - "VAT Difference",
// End of the added line.
"VAT Base Amt. to Report (LCY)","VAT Amount to Report (LCY)");
... -
Zmena kódu v CalcVATToReportfunkcia v tabuľke Riadok predaja (37) takto:
Nahradenie kód 1...
// Delete the following line.
PROCEDURE CalcVATToReport@1360001(SalesHeader@1360000 : Record 36;VATBaseAmount@1360001 : Decimal;VATAmount@1360002 : Decimal;VAR VATBaseAmountToReport@1360003 : Decimal;VAR VATAmountToReport@1360004 : Decimal);
// End of the deleted line.
BEGIN
...Nahradenie kód 1
...
// Add the following lines.
PROCEDURE CalcVATToReport@1360001(SalesHeader@1360000 : Record 36;VATBaseAmount@1360001 : Decimal;AmtInclVAT@1360005 : Decimal;VAR VATBaseAmountToReport@1360003 : Decimal;VAR VATAmountToReport@1360004 : Decimal);
VAR
AmountLCY@1360006 : Decimal;
AmtInclVATLCY@1360007 : Decimal;
// End of the added lines.
BEGIN
...Existujúci kód 2
...ROUND(VATBaseAmount / SalesHeader."VAT Currency Factor");
// Delete the following lines.
VATAmountToReport :=
ROUND(VATAmount / SalesHeader."VAT Currency Factor");
END ELSE BEGIN
VATBaseAmountToReport := VATBaseAmount;
VATAmountToReport := VATAmount;
// End of the deleted lines.
END;
...Nahradenie kód 2
...ROUND(VATBaseAmount / SalesHeader."VAT Currency Factor");
// Add the following lines.
AmountLCY :=
ROUND(VATBaseAmount / SalesHeader."VAT Currency Factor");
AmtInclVATLCY :=
ROUND(AmtInclVAT / SalesHeader."VAT Currency Factor");
VATAmountToReport :=
AmtInclVATLCY - AmountLCY;
END ELSE BEGIN
VATBaseAmountToReport := VATBaseAmount;
VATAmountToReport := AmtInclVAT - VATBaseAmount;
// End of the added lines.
END;
... -
Zmena kódu v poliach riadok tabuľka (39) takto:
Nahradenie kód 1...
// Delete the following line.
CalcVATToReport(PurchHeader,"VAT Base Amount","Amount Including VAT" - "VAT Base Amount",
// End of the deleted line.
"VAT Base Amt. to Report (LCY)","VAT Amount to Report (LCY)","VAT % (Non Deductible)");
...Nahradenie kód 1
...
// Add the following line.
CalcVATToReport(PurchHeader,"VAT Base Amount","Amount Including VAT",
// End of the added line.
"VAT Base Amt. to Report (LCY)","VAT Amount to Report (LCY)","VAT % (Non Deductible)");
...Existujúci kód 2
...
// Delete the following line.
CalcVATToReport(PurchHeader,"VAT Base Amount","Amount Including VAT" - "VAT Base Amount",
// End of the deleted line.
"VAT Base Amt. to Report (LCY)","VAT Amount to Report (LCY)","VAT % (Non Deductible)");
...Nahradenie kód 2
...
// Add the following line.
CalcVATToReport(PurchHeader,"VAT Base Amount","Amount Including VAT",
// End of the added line.
"VAT Base Amt. to Report (LCY)","VAT Amount to Report (LCY)","VAT % (Non Deductible)");
... -
Zmena kódu v UpdateVATAmounts funkcia v riadok tabuľka (39):
Existujúci kód...
// Delete the following line.
CalcVATToReport(PurchHeader,"VAT Base Amount","Amount Including VAT" - "VAT Base Amount",
// End of the deleted line.
"VAT Base Amt. to Report (LCY)","VAT Amount to Report (LCY)","VAT % (Non Deductible)");
...Nahradenie kódu
...
// Add the following line.
CalcVATToReport(PurchHeader,"VAT Base Amount","Amount Including VAT",
// End of the added line.
"VAT Base Amt. to Report (LCY)","VAT Amount to Report (LCY)","VAT % (Non Deductible)");
... -
Zmena kódu v UpdateVATOnLines funkcia v riadok tabuľka (39):
Existujúci kód...END;
// Delete the following line.
CalcVATToReport(PurchHeader,"VAT Base Amount","Amount Including VAT",
// End of the deleted line.
"VAT Base Amt. to Report (LCY)","VAT Amount to Report (LCY)","VAT % (Non Deductible)");
...Nahradenie kódu
...END;
// Add the following line.
CalcVATToReport(PurchHeader,"VAT Base Amount","Amount Including VAT",
// End of the added line.
"VAT Base Amt. to Report (LCY)","VAT Amount to Report (LCY)","VAT % (Non Deductible)");
... -
Zmena kódu v CalcVATAmountLines v riadok tabuľka (39):
Existujúci kód...
// Delete the following line.
CalcVATToReport(PurchHeader,"VAT Base","VAT Amount" - "VAT Difference",
// End of the deleted line.
"VAT Base Amt. to Report (LCY)","VAT Amount to Report (LCY)","VAT % (Non Deductible)");
...Nahradenie kódu
...
// Add the following line.
CalcVATToReport(PurchHeader,"VAT Base","Amount Including VAT" - "VAT Difference",
// End of the added line.
"VAT Base Amt. to Report (LCY)","VAT Amount to Report (LCY)","VAT % (Non Deductible)");
... -
Zmena kódu v CalcVATToReport funkcia riadok tabuľka (39) takto:
Nahradenie kód 1...
// Delete the following lines.
PROCEDURE CalcVATToReport@1360000(PurchHeader@1360000 : Record 38;VATBaseAmount@1360001 : Decimal;VATAmount@1360002 : Decimal;VAR VATBaseAmountToReport@1360003 : Decimal;VAR VATAmountToReport@1360004 : Decimal;NonDeductableVATPct@1360005 : Decimal);
VAR
NonDeductableVATAmount@1360006 : Decimal;
BEGIN
NonDeductableVATAmount := VATAmount * NonDeductableVATPct / 100;
// End of the deleted lines.
IF PurchHeader."Currency Code" <> '' THEN BEGIN
...Nahradenie kód 1
...
// Add the following lines.
PROCEDURE CalcVATToReport@1360000(PurchHeader@1360000 : Record 38;VATBaseAmount@1360001 : Decimal;AmtInclVAT@1360007 : Decimal;VAR VATBaseAmountToReport@1360003 : Decimal;VAR VATAmountToReport@1360004 : Decimal;NonDeductableVATPct@1360005 : Decimal);
VAR
NonDeductableVATAmount@1360006 : Decimal;
AmountLCY@1360008 : Decimal;
AmtInclVATLCY@1360009 : Decimal;
BEGIN
NonDeductableVATAmount := (AmtInclVAT - VATBaseAmount) * NonDeductableVATPct / 100;
// End of the added lines.
IF PurchHeader."Currency Code" <> '' THEN BEGIN
...Existujúci kód 2
...ROUND((VATBaseAmount + NonDeductableVATAmount) / PurchHeader."VAT Currency Factor");
// Delete the following lines.
VATAmountToReport :=
ROUND((VATAmount - NonDeductableVATAmount) / PurchHeader."VAT Currency Factor");
END ELSE BEGIN
VATBaseAmountToReport := VATBaseAmount + ROUND(NonDeductableVATAmount);
VATAmountToReport := VATAmount - ROUND(NonDeductableVATAmount);
// End of the deleted lines.
END
...Nahradenie kód 2
...ROUND((VATBaseAmount + NonDeductableVATAmount) / PurchHeader."VAT Currency Factor");
// Add the following lines.
AmountLCY :=
ROUND(VATBaseAmount / PurchHeader."VAT Currency Factor");
AmtInclVATLCY :=
ROUND(AmtInclVAT / PurchHeader."VAT Currency Factor");
VATAmountToReport :=
AmtInclVATLCY - AmountLCY - ROUND(NonDeductableVATAmount / PurchHeader."VAT Currency Factor");
END ELSE BEGIN
VATBaseAmountToReport := VATBaseAmount + ROUND(NonDeductableVATAmount);
VATAmountToReport := AmtInclVAT - VATBaseAmount - ROUND(NonDeductableVATAmount);
// End of the added lines.
END
... -
Zmeniť kód polí v tabuľke Riadok (5902):
Nahradenie kód 1...
// Delete the following line.
CalcVATToReport(ServHeader,"VAT Base Amount","Amount Including VAT" - "VAT Base Amount",
// End of the deleted line.
"VAT Base Amt. to Report (LCY)","VAT Amount to Report (LCY)");
...Nahradenie kód 1
...
// Add the following line.CalcVATToReport(ServHeader,"VAT Base Amount","Amount Including VAT",
// End of the added line.
"VAT Base Amt. to Report (LCY)","VAT Amount to Report (LCY)");
...Existujúci kód 2
...
// Delete the following line.
CalcVATToReport(ServHeader,"VAT Base Amount","Amount Including VAT" - "VAT Base Amount",
// End of the deleted line.
"VAT Base Amt. to Report (LCY)","VAT Amount to Report (LCY)");
...Nahradenie kód 2
...
// Add the following line.
CalcVATToReport(ServHeader,"VAT Base Amount","Amount Including VAT",
// End of the added line.
"VAT Base Amt. to Report (LCY)","VAT Amount to Report (LCY)");
... -
Zmena kódu v UpdateVATAmounts funkcia v tabuľke Riadok (5902):
Existujúci kód...
// Delete the following line.
CalcVATToReport(ServHeader,"VAT Base Amount","Amount Including VAT" - "VAT Base Amount",
// End of the deleted line.
"VAT Base Amt. to Report (LCY)","VAT Amount to Report (LCY)");
...Nahradenie kódu
...
// Add the following line.
CalcVATToReport(ServHeader,"VAT Base Amount","Amount Including VAT",
// End of the added line.
"VAT Base Amt. to Report (LCY)","VAT Amount to Report (LCY)");
... -
Zmena kódu v CalcVATAmountLines funkcia v tabuľke Riadok (5902):
Existujúci kód...
// Delete the following line.
CalcVATToReport(ServHeader,"VAT Base","VAT Amount" - "VAT Difference",
// End of the deleted line.
"VAT Base Amt. to Report (LCY)","VAT Amount to Report (LCY)");
...Nahradenie kódu
...
// Add the following line.CalcVATToReport(ServHeader,"VAT Base","Amount Including VAT" - "VAT Difference",
// End of the added line.
"VAT Base Amt. to Report (LCY)","VAT Amount to Report (LCY)");
... -
Zmena kódu v UpdateVATOnLines funkcia v tabuľke Riadok (5902):
Existujúci kód..."VAT Base Amount" := NewVATBaseAmount;
// Delete the following line.
CalcVATToReport(ServHeader,"VAT Base Amount","Amount Including VAT" - "VAT Base Amount",
// End of the deleted line.
"VAT Base Amt. to Report (LCY)","VAT Amount to Report (LCY)");
...Nahradenie kódu
..."VAT Base Amount" := NewVATBaseAmount;
// Add the following line.
CalcVATToReport(ServHeader,"VAT Base Amount","Amount Including VAT",
// End of the added line.
"VAT Base Amt. to Report (LCY)","VAT Amount to Report (LCY)");
... -
Zmena kódu v CalcVATToReport funkcia v tabuľke Riadok (5902):
Nahradenie kód 1...
// Delete the following line.
PROCEDURE CalcVATToReport@1360000(ServHeader@1360004 : Record 5900;VATBaseAmount@1360003 : Decimal;VATAmount@1360002 : Decimal;VAR VATBaseAmountToReport@1360001 : Decimal;VAR VATAmountToReport@1360000 : Decimal);
// End of the deleted line.
BEGIN
...Nahradenie kód 1
...
// Add the following lines.
PROCEDURE CalcVATToReport@1360000(ServHeader@1360004 : Record 5900;VATBaseAmount@1360003 : Decimal;AmtInclVAT@1360007 : Decimal;VAR VATBaseAmountToReport@1360001 : Decimal;VAR VATAmountToReport@1360000 : Decimal);
VAR
AmountLCY@1360005 : Decimal;
AmtInclVATLCY@1360006 : Decimal;
// End of the added lines.
BEGIN
...Existujúci kód 2
...ROUND(VATBaseAmount / ServHeader."VAT Currency Factor");
// Delete the following lines.
VATAmountToReport :=
ROUND(VATAmount / ServHeader."VAT Currency Factor");
END ELSE BEGIN
VATBaseAmountToReport := VATBaseAmount;
VATAmountToReport := VATAmount;
// End of the deleted lines.
END;
...Nahradenie kód 2
...ROUND(VATBaseAmount / ServHeader."VAT Currency Factor");
// Add the following lines.
AmountLCY :=
ROUND(VATBaseAmount / ServHeader."VAT Currency Factor");
AmtInclVATLCY :=
ROUND(AmtInclVAT / ServHeader."VAT Currency Factor");
VATAmountToReport :=
AmtInclVATLCY - AmountLCY;
END ELSE BEGIN
VATBaseAmountToReport := VATBaseAmount;
VATAmountToReport := AmtInclVAT - VATBaseAmount;
// End of the added lines.
END;
... -
Zmena kódu v DivideAmount funkcia v predaj-Post procedúra (80) takto:
Nahradenie kód 1...LOCAL PROCEDURE DivideAmount@8(QtyType@1000 : 'General,Invoicing,Shipping';SalesLineQty@1001 : Decimal);
// Delete the following lines.
VAR
TotalVATBaseAmtLCY@1360001 : Decimal;
TotalVATAmountLCY@1360000 : Decimal;
// End of the deleted lines.
BEGIN
...Nahradenie kód 1
...LOCAL PROCEDURE DivideAmount@8(QtyType@1000 : 'General,Invoicing,Shipping';SalesLineQty@1001 : Decimal);
BEGIN
...Existujúci kód 2
...END;
// Delete the following lines.
TempVATAmountLineRemainder."Calc VAT Base Amount to Report" :=
TempVATAmountLineRemainder."Calc VAT Base Amount to Report" + "VAT Base Amount";
TempVATAmountLineRemainder."Calc VAT Amount to Report" :=
TempVATAmountLineRemainder."Calc VAT Amount to Report" + "Amount Including VAT" - "VAT Base Amount" - "VAT Difference";
CalcVATToReport(SalesHeader,
TempVATAmountLineRemainder."Calc VAT Base Amount to Report",
TempVATAmountLineRemainder."Calc VAT Amount to Report",
TotalVATBaseAmtLCY,TotalVATAmountLCY);
"VAT Base Amt. to Report (LCY)" := TotalVATBaseAmtLCY - TempVATAmountLineRemainder."VAT Base Amt. to Report (LCY)";
"VAT Amount to Report (LCY)" := TotalVATAmountLCY - TempVATAmountLineRemainder."VAT Amount to Report (LCY)";
TempVATAmountLineRemainder."VAT Base Amt. to Report (LCY)" := TotalVATBaseAmtLCY;
TempVATAmountLineRemainder."VAT Amount to Report (LCY)" := TotalVATAmountLCY;
// End of the deleted lines.
...Nahradenie kód 2
...END;
// Add the following line.
CalcRoundedVATToReport(SalesLine,SalesHeader);
// End of the added line.
... -
Vytvoriť funkciu v predaj-Post procedúra (80) takto:
LOCAL PROCEDURE CalcRoundedVATToReport@1360026(VAR SalesLine@1360002 : Record 37;SalesHeader@1360003 : Record 36);VAR
TotalVATBaseAmtLCY@1360005 : Decimal;
TotalVATAmountLCY@1360004 : Decimal;
BEGIN
WITH SalesLine DO BEGIN
TempVATAmountLineRemainder."Calc VAT Base Amount to Report" +=
"VAT Base Amount";
TempVATAmountLineRemainder."Calc VAT Amount to Report" +=
"Amount Including VAT";
CalcVATToReport(SalesHeader,
TempVATAmountLineRemainder."Calc VAT Base Amount to Report",
TempVATAmountLineRemainder."Calc VAT Amount to Report",
TotalVATBaseAmtLCY,TotalVATAmountLCY);
"VAT Base Amt. to Report (LCY)" := TotalVATBaseAmtLCY - TempVATAmountLineRemainder."VAT Base Amt. to Report (LCY)";
"VAT Amount to Report (LCY)" := TotalVATAmountLCY - TempVATAmountLineRemainder."VAT Amount to Report (LCY)";
TempVATAmountLineRemainder."VAT Base Amt. to Report (LCY)" := TotalVATBaseAmtLCY;
TempVATAmountLineRemainder."VAT Amount to Report (LCY)" := TotalVATAmountLCY;
END;
END; -
Zmena kódu v DivideAmount funkcia v nákupné.-Post procedúra (90) takto:
Nahradenie kód 1...LOCAL PROCEDURE DivideAmount@8(QtyType@1000 : 'General,Invoicing,Shipping';PurchLineQty@1001 : Decimal);
// Delete the following lines.
VAR
TotalVATBaseAmtLCY@1360001 : Decimal;
TotalVATAmountLCY@1360000 : Decimal;
// End of the deleted lines.
BEGIN
...Nahradenie kód 1
...LOCAL PROCEDURE DivideAmount@8(QtyType@1000 : 'General,Invoicing,Shipping';PurchLineQty@1001 : Decimal);
BEGIN
...Existujúci kód 2
...END;
// Delete the following lines.
TempVATAmountLineRemainder."Calc VAT Base Amount to Report" :=
TempVATAmountLineRemainder."Calc VAT Base Amount to Report" + "VAT Base Amount";
TempVATAmountLineRemainder."Calc VAT Amount to Report" :=
TempVATAmountLineRemainder."Calc VAT Amount to Report" + "Amount Including VAT" - "VAT Base Amount" - "VAT Difference";
PurchLine.CalcVATToReport(PurchHeader,
TempVATAmountLineRemainder."Calc VAT Base Amount to Report",
TempVATAmountLineRemainder."Calc VAT Amount to Report",
TotalVATBaseAmtLCY,TotalVATAmountLCY,"VAT % (Non Deductible)");
"VAT Base Amt. to Report (LCY)" := TotalVATBaseAmtLCY - TempVATAmountLineRemainder."VAT Base Amt. to Report (LCY)";
"VAT Amount to Report (LCY)" := TotalVATAmountLCY - TempVATAmountLineRemainder."VAT Amount to Report (LCY)";
TempVATAmountLineRemainder."VAT Base Amt. to Report (LCY)" := TotalVATBaseAmtLCY;
TempVATAmountLineRemainder."VAT Amount to Report (LCY)" := TotalVATAmountLCY;
// End of the deleted lines.
...Nahradenie kód 2
...END;
// Add the following line.
CalcRoundedVATToReport(PurchLine,PurchHeader);
// End of the added line.
... -
Vytvoriť funkciu v nákupné.-Post procedúra (90) takto:
LOCAL PROCEDURE CalcRoundedVATToReport@1360026(VAR PurchLine@1360002 : Record 39;PurchHeader@1360003 : Record 38);VAR
TotalVATBaseAmtLCY@1360005 : Decimal;
TotalVATAmountLCY@1360004 : Decimal;
BEGIN
WITH PurchLine DO BEGIN
TempVATAmountLineRemainder."Calc VAT Base Amount to Report" +=
"VAT Base Amount";
TempVATAmountLineRemainder."Calc VAT Amount to Report" +=
"Amount Including VAT";
CalcVATToReport(PurchHeader,
TempVATAmountLineRemainder."Calc VAT Base Amount to Report",
TempVATAmountLineRemainder."Calc VAT Amount to Report",
TotalVATBaseAmtLCY,TotalVATAmountLCY,"VAT % (Non Deductible)");
"VAT Base Amt. to Report (LCY)" := TotalVATBaseAmtLCY - TempVATAmountLineRemainder."VAT Base Amt. to Report (LCY)";
"VAT Amount to Report (LCY)" := TotalVATAmountLCY - TempVATAmountLineRemainder."VAT Amount to Report (LCY)";
TempVATAmountLineRemainder."VAT Base Amt. to Report (LCY)" := TotalVATBaseAmtLCY;
TempVATAmountLineRemainder."VAT Amount to Report (LCY)" := TotalVATAmountLCY;
END;
END; -
Zmena kódu v DivideAmount funkcia Serv čiastky správy procedúra (5986):
Nahradenie kód 1...ChargeableQty@1006 : Decimal;
// Delete the following lines.
TotalVATBaseAmtLCY@1360001 : Decimal;
TotalVATAmountLCY@1360000 : Decimal;
// End of the deleted lines.
BEGIN
...Nahradenie kód 1
...ChargeableQty@1006 : Decimal;
BEGIN
...Existujúci kód 2
...END;
// Delete the following lines.
TempVATAmountLineRemainder."Calc VAT Base Amount to Report" :=
TempVATAmountLineRemainder."Calc VAT Base Amount to Report" + "VAT Base Amount";
TempVATAmountLineRemainder."Calc VAT Amount to Report" :=
TempVATAmountLineRemainder."Calc VAT Amount to Report" + "Amount Including VAT" - "VAT Base Amount" - "VAT Difference";
CalcVATToReport(ServiceHeader,
TempVATAmountLineRemainder."Calc VAT Base Amount to Report",
TempVATAmountLineRemainder."Calc VAT Amount to Report",
TotalVATBaseAmtLCY,TotalVATAmountLCY);
"VAT Base Amt. to Report (LCY)" := TotalVATBaseAmtLCY - TempVATAmountLineRemainder."VAT Base Amt. to Report (LCY)";
"VAT Amount to Report (LCY)" := TotalVATAmountLCY - TempVATAmountLineRemainder."VAT Amount to Report (LCY)";
TempVATAmountLineRemainder."VAT Base Amt. to Report (LCY)" := TotalVATBaseAmtLCY;
TempVATAmountLineRemainder."VAT Amount to Report (LCY)" := TotalVATAmountLCY;
// End of the deleted lines.
...Nahradenie kód 2
...END;
// Add the following line.
CalcRoundedVATToReport(ServiceLine,TempVATAmountLineRemainder,ServHeader);
// End of the added line.
... -
Vytvoriť funkciu v Serv čiastky správy procedúra (5986) takto:
LOCAL PROCEDURE CalcRoundedVATToReport@1360001(VAR ServiceLine@1360002 : Record 5902;VAR TempVATAmountLineRemainder@1360004 : Record 290;ServHeader@1360003 : Record 5900);VAR
TotalVATBaseAmtLCY@1360006 : Decimal;
TotalVATAmountLCY@1360005 : Decimal;
BEGIN
WITH ServiceLine DO BEGIN
TempVATAmountLineRemainder."Calc VAT Base Amount to Report" +=
"VAT Base Amount";
TempVATAmountLineRemainder."Calc VAT Amount to Report" +=
"Amount Including VAT";
CalcVATToReport(ServHeader,
TempVATAmountLineRemainder."Calc VAT Base Amount to Report",
TempVATAmountLineRemainder."Calc VAT Amount to Report",
TotalVATBaseAmtLCY,TotalVATAmountLCY);
"VAT Base Amt. to Report (LCY)" := TotalVATBaseAmtLCY - TempVATAmountLineRemainder."VAT Base Amt. to Report (LCY)";
"VAT Amount to Report (LCY)" := TotalVATAmountLCY - TempVATAmountLineRemainder."VAT Amount to Report (LCY)";
TempVATAmountLineRemainder."VAT Base Amt. to Report (LCY)" := TotalVATBaseAmtLCY;
TempVATAmountLineRemainder."VAT Amount to Report (LCY)" := TotalVATAmountLCY;
END;
END;
Požiadavky
Maďarský verzia systému Microsoft Dynamics NAV 2009 R2 nainštalovaný chcete použiť túto rýchlu opravu, musíte mať.
Informácie o odstránení
Nemôžete odstrániť túto rýchlu opravu.
Stav
Spoločnosť Microsoft potvrdila, že ide o problém v produktoch spoločnosti Microsoft, ktoré sú uvedené v časti Vzťahuje sa na.
Poznámka: To je "Rýchlo publikovať" článok vytvorené priamo v rámci organizácie technickej podpory spoločnosti Microsoft. Uvedené informácie sa poskytuje ako-v reakcii na naliehavé problémy. Rýchlosťou robiť materiály môžu obsahovať typografické chyby a môžu byť kedykoľvek bez predchádzajúceho upozornenia. Prečítajte si Podmienky používaniaz iných dôvodov.
